Chip 2000 August

home *** CD-ROM | disk | FTP | other *** search

/ Chip 2000 August / chip_08_2000.iso / aktualnosci / shareware / Rhinoceros / rh11eval_20000320.exe / %MAINDIR% / RHINOHLP.CNT (.txt) < prev next >

Wrap

Microsoft Windows Help File Content | 2000-06-08 | 36.9 KB | 999 lines

:Base Rhinohlp.hlp>main :Title Rhinoceros Help 1 Welcome=IDH_WELCOME_TO_RHINOCEROS 1 Register Rhino=IDH_REGISTRATION_FORM 1 What's New in SR 1 2 New in 1.1 Service Release 1=What_s_New_in_1_1_Service_Release_1 1 What's New in Version 1.1 2 List=IDH_What_s_New_in_Rhino_Version_1_1 2 Gazelle technology=MID_Gazelle 2 New Commands 3 Annotation text=NEW_Text 3 Arc, start, end, radius=NEW_ArcSER 3 CPlane perpendicular to curve=MID_CPlanePerpToCrv 3 CPlane cycle=MID_CPlanePrev 3 Curve start and end display=NOV_Curves 3 Dimension text edit=NEW_DimEdit 3 Developable surfaces=MID_Developable_surface 3 Export object properties to spreadsheet=MID_ExportProperties 3 Extract points from objects=MID_ExtractPt 3 Hydrostatic calculations=NOV_Hydrostatics 3 Middle mouse button support=MID_Middle_mouse_button_support 3 Material name for objects=NEW_SetObjectMaterial 3 Orient object perpendicular to curve=MID_OrientPerpToCrv 3 Points off on selected objects=MID_PtOffSelected 3 Polygon mesh reduction=MID_Polygon_Mesh_reductions 3 Polyline on mesh=MID_PolylineOnMesh 3 Select objects by name=MID_SelName 3 Set multiple object names=MID_SetObjectNameMultiple 3 Set the target point while zooming=MID_ZoomTarget 3 Shade selected objects=MID_ShadeSelected 3 Show selected objects=MID_ShowSelected 3 Surface from curve network=MID_NetworkSrf1 3 Shaded working mode=NEW_Working_Shaded_Mode 3 Swap object locked state=MID_LockSwap 3 Swap object visibility=MID_HideSwap 3 Synchronize views=MID_SynchronizeViews 3 Text command name change=NEW_TextObject_Change 3 Turntable animation=NOV_Turntable 3 Turn one layer off=NOV_OneLayerOff 3 Unlock selected objects=MID_UnlockSelected 2 Dimensioning 3 Linear=MID_Dimension 2 Surface Analysis 3 Draft angle=MID_DraftAngleAnalysis 3 Curvature=MID_Curvature_anaylsis 3 Environment map=MID_Emap 3 Zebra=MID_Zebra 2 Interface Improvements 3 Angle constraint=NOV_angle 3 Bitmap preview=MID_Bitmap_preview 3 BMRT toolbar=NOV_BMRT 3 Coordinate entry=NOV_Coordinates 3 Menu udates=NOV_Menus 3 Paths for textures=MID_Texture_path 3 Point object snap=NOV_Pt 3 POV-Ray toolbar=NOV_POV 3 Rhino file preview=NOV_Preview_image 3 Save compact 3DM file=NOV_Clear_meshes 3 Set view projection=NOV_Views 3 Tab function changed=NEW_TAB 3 Text and dimension import/export=NOV_Text_export 3 Workspace update=NEW_Worspace_Oct99 3 World axis color change=MID_World_Axis_color 2 New Export File Formats 3 3D Studio MAX 3.0 IGES=IDH_IGES_3DS_MAX_3 3 Softimage supported through IGES=IDH_IGES_SOFTIMAGE 3 ACIS SAT export=MID_SAT_export 3 Parasolid X_T=NOV_X_T 2 Import Export Improvements 3 3DS coordinates=NOV_3DS 3 ACIS SAT export=MID_SAT_export 3 Adobe Illustrator=MID_AI_file_exchange 3 AutoCAD 2000=MID_AutoCAD_2000 3 Bryce OBJ=NOV_OBJ 3 Parasolid X_T=NOV_X_T 3 POV material=NEW_SetObjectMaterial 3 RIB material=NEW_SetObjectMaterial 3 Material name export=NEW_SetObjectMaterial 3 Export to spreadsheet=MID_ExportProperties 3 IGES 4 3D Studio MAX 3.0=IDH_IGES_3DS_MAX_3 4 AUTOFORM=IDH_IGES_AUTOFORM 4 CADCEUS=IDH_IGES_CADCEUS 4 Delcam=IDH_IGES_DELCAM 4 FastShip=IDH_IGES_FASTSHIP 4 IronCAD=IDH_IGES_IRONCAD 4 LUSAS=IDH_IGES_LUSAS 4 Maya=IDH_IGES_MAYA 4 OptiCAD=IDH_IGES_OPTICAD 4 SUM4=MID_IGES_Autoform_Sum4 3 OBJ 4 OBJ material=NEW_SetObjectMaterial 3 VRML 4 VRML background color=NOV_VRML 4 VRML material=NEW_SetObjectMaterial 2 Command Improvements 3 ArcTTR Nov-99=NOV_ArcTTR 3 Back=NOV_Views 3 Boolean multiple objects=NEW_Multiple_Booleans 3 Bottom=NOV_Views 3 Chamfer distances=MID_Chamfer 3 Chamfer simplify curve=NEW_Fillet_Chamfer_Extend 3 ChamferSrf=NEW_FilletSrf 3 CircleTTR=MID_CircleTTR 3 CircleTTT=NEW_CircleTTT 3 CurvatureGraphOn=MID_CurvatureGraph 3 Curve Nov-99=NOV_High_degree 3 Dup=NOV_Dup 3 DupEdge=NOV_DupEdge 3 ExtrudeAlongCrv=NOV_ExtrudeAlongCrv 3 Extrude=MID_Extrude_periodic_curves 3 Extend simplify curve=NEW_Fillet_Chamfer_Extend 3 Fillet polyline=MID_Fillet 3 Fillet simplify curve=NEW_Fillet_Chamfer_Extend 3 FilletSrf=NEW_FilletSrf 3 Front=NOV_Views 3 InterpCrv=NOV_High_degree 3 Left=NOV_Views 3 Loft=MID_KinkMatch_on_Loft 3 Make2D NoCopy option=NEW_Make2D 3 Mirror=NEW_Mirror 3 Offset=MID_Offset 3 Orient=NOV_Orient 3 OrientOnSrf=NOV_OrientOnSrf 3 Plane=MID_Plane 3 Project points=NEW_Project_pullback_points 3 Pull points=NEW_Project_pullback_points 3 RebuildSrf=NOV_High_degree 3 Right=NOV_Views 3 Scale=MID_Scale 3 SelLayer=MID_SelLayer 3 Shade=MID_OpenGL_Shade 3 Split=NOV_Split 3 SplitSrf=MID_SplitSrf 3 Taper=NEW_Taper 3 Top=NOV_Views 3 Trim=MID_Trim 3 UnrollSrf Nov-99=NOV_UnrollSrf 3 Viewport=NEW_Viewport 1 Commands and Shortcuts 2 Command List=IDH_COMMAND_LIST 2 Shortcuts=IDH_SHORTCUTS 1 Support 2 Why Rhinoceros?=IDH_WHY_RHINOCEROS 2 Technical Support=IDH_CONTACTING_ROBERT_MCNEEL_ASSOCIATES>main 2 Frequently Asked Questions=IDH_FREQUENTLY_ASKED_QUESTIONS>main 2 Using Help=IDH_HELP_COMMAND 1 Views and Construction Planes 2 Views 3 Set the view=IDH_SET_THE_VIEW_HEADER>main 3 View options=IDH_OPTIONS_DIALOG_BOX_VIEW_TAB 3 Shortcuts=IDH_CHANGE_THE_VIEW_HEADER>main 3 Back=IDH_BACK_COMMAND 3 Bottom=IDH_BOTTOM_COMMAND 3 Front=IDH_FRONT_COMMAND 3 Left=IDH_LEFT_COMMAND 3 Perspective=IDH_PERSPECTIVE_COMMAND 3 Plan=IDH_PLAN_COMMAND 3 Right=IDH_RIGHT_COMMAND 3 Top=IDH_TOP_COMMAND 3 Synchronize scale and center=IDH_SYNCHRONIZEVIEWS_COMMAND 3 Swap views of two viewports=IDH_SWAPVIEW_COMMAND 3 Undo view change=IDH_ZOOMPREV_COMMAND 3 Redo last view change=IDH_ZOOMNEXT_COMMAND 3 Zoom 4 Zoom=IDH_ZOOM_HEADER>main 4 In=IDH_ZOOMIN_COMMAND 4 Out=IDH_ZOOMOUT_COMMAND 4 Dynamic=IDH_ZOOMDYNAMIC_COMMAND 4 Window=IDH_ZOOMWINDOW_COMMAND 4 Extents of objects=IDH_ZOOMEXTENTS_COMMAND 4 Extents of objects all viewports=IDH_ZOOMEXTENTSALL_COMMAND 4 Extents of selected objects=IDH_ZOOMSELECTED_COMMAND 4 Extents of selected objects all viewports=IDH_ZOOMSELECTEDALL_COMMAND 4 Set zoom scale factor=IDH_ZOOMX_COMMAND 3 Pan 4 Pan=IDH_PAN_COMMAND 4 Down=IDH_PANDOWN_COMMAND 4 Left=IDH_PANLEFT_COMMAND 4 Right=IDH_PANRIGHT_COMMAND 4 Up=IDH_PANUP_COMMAND 3 Rotate and Tilt 4 Rotate 5 Turntable animation=IDH_TURNTABLE_COMMAND 5 Rotate the view=IDH_ROTATEVIEW_COMMAND 5 Down=IDH_ROTATEDOWN_COMMAND 5 Left=IDH_ROTATELEFT_COMMAND 5 Right=IDH_ROTATERIGHT_COMMAND 5 Up=IDH_ROTATEUP_COMMAND 4 Tilt 5 Left=IDH_TILTLEFT_COMMAND 5 Right=IDH_TILTRIGHT_COMMAND 3 Construction Plane Views 4 Back=IDH_VIEWCPLANEBACK_COMMAND 4 Bottom=IDH_VIEWCPLANEBOTTOM_COMMAND 4 Front=IDH_VIEWCPLANEFRONT_COMMAND 4 Left=IDH_VIEWCPLANELEFT_COMMAND 4 Right=IDH_VIEWCPLANERIGHT_COMMAND 4 Top=IDH_VIEWCPLANETOP_COMMAND 3 Named Views 4 Named views=IDH_NAMEDVIEW_COMMAND 4 Save=IDH_SAVEVIEW_COMMAND 4 Restore=IDH_RESTOREVIEW_COMMAND 4 Read from file=IDH_READNAMEDVIEWSFROMFILE_COMMAND 2 Viewports 3 Shaded working mode=IDH_SHADEDVIEWPORT_COMMAND 3 Viewport layout=IDH_VIEWPORT_LAYOUT_HEADER>main 3 New=IDH_NEWVIEWPORT_COMMAND 3 3 viewports=IDH_3VIEW_COMMAND 3 4 viewports=IDH_4VIEW_COMMAND 3 Toggle between 3 and 4 viewports=IDH_34VIEW_COMMAND 3 Split horizontally=IDH_SPLITVIEWPORTHORIZONTAL_COMMAND 3 Split vertically=IDH_SPLITVIEWPORTVERTICAL_COMMAND 3 Bring to top=IDH_BRINGVIEWPORTTOTOP_COMMAND 3 Read from file=IDH_READVIEWPORTSFROMFILE_COMMAND 3 Background Bitmaps for Tracing 4 Background bitmaps=IDH_BACKGROUND_BITMAPS_HEADER 4 Place=IDH_PLACEBACKGROUNDBITMAP_COMMAND 4 Remove=IDH_REMOVEBACKGROUNDBITMAP_COMMAND 4 Hide=IDH_HIDEBACKGROUNDBITMAP_COMMAND 4 Show hidden=IDH_SHOWBACKGROUNDBITMAP_COMMAND 4 Move=IDH_MOVEBACKGROUNDBITMAP_COMMAND 4 Align=IDH_ALIGNBACKGROUNDBITMAP_COMMAND 4 Scale=IDH_SCALEBACKGROUNDBITMAP_COMMAND 4 Wallpaper 5 Display=IDH_WALLPAPER_COMMAND 5 Remove=IDH_REMOVEWALLPAPER_COMMAND 3 Viewport Properties 4 Viewport properties=IDH_VIEWPORTPROPERTIES_COMMAND 4 Set perspective angle=IDH_PERSPECTIVEANGLE_COMMAND 4 Place camera and target=IDH_PLACECAMERATARGET_COMMAND 4 Place target=IDH_PLACETARGET_COMMAND 4 Toggle viewport title=IDH_VIEWPORTTITLE_COMMAND 2 Construction Plane 3 Set the construction plane=IDH_SET_CONSTRUCTION_PLANE_HEADER 3 Copy settings=IDH_COPYCPLANESETTINGSTOALL_COMMAND 3 Elevation=IDH_CPLANEELEVATION_COMMAND 3 From 3 points=IDH_CPLANE3PT_COMMAND 3 Origin=IDH_CPLANEORIGIN_COMMAND 3 Rotate=IDH_ROTATECPLANE_COMMAND 3 Through a point=IDH_CPLANETHROUGHPT_COMMAND 3 To object=IDH_CPLANETOOBJECT_COMMAND 3 To view=IDH_CPLANETOVIEW_COMMAND 3 Perpendicular to a curve=IDH_CPLANEPERPTOCRV_COMMAND 3 Vertical to current=IDH_CPLANEV_COMMAND 3 X-axis=IDH_CPLANEX_COMMAND 3 Z-axis=IDH_CPLANEZ_COMMAND 3 All through a point=IDH_ALLCPLANESTHROUGHPT_COMMAND 3 All origins to a point=IDH_CPLANEORIGINALL_COMMAND 3 All to the same orientation=IDH_COPYCPLANETOALL_COMMAND 3 Restore Construction planes 4 Top=IDH_CPLANETOP_COMMAND 4 Right=IDH_CPLANERIGHT_COMMAND 4 Front=IDH_CPLANEFRONT_COMMAND 3 Named Construction Planes 4 Named construction planes=IDH_NAMEDCPLANE_COMMAND 4 Save=IDH_SAVECPLANE_COMMAND 4 Restore=IDH_RESTORECPLANE_COMMAND 4 Read from file=IDH_READNAMEDCPLANESFROMFILE_COMMAND 3 Construction Plane Views 4 Back=IDH_VIEWCPLANEBACK_COMMAND 4 Bottom=IDH_VIEWCPLANEBOTTOM_COMMAND 4 Front=IDH_VIEWCPLANEFRONT_COMMAND 4 Left=IDH_VIEWCPLANELEFT_COMMAND 4 Right=IDH_VIEWCPLANERIGHT_COMMAND 4 Top=IDH_VIEWCPLANETOP_COMMAND 1 Modeling Aids 2 Modeling aids=IDH_MODELING_AIDS_HEADER>main 2 Options=IDH_OPTIONS_DIALOG_BOX_MODELING_AIDS_TAB 2 Select Objects 3 Select objects=IDH_SELECT_OBJECTS_HEADER>main 3 Select all=IDH_SELALL_COMMAND 3 Deselect all=IDH_SELNONE_COMMAND 3 Invert selection=IDH_INVERT_COMMAND 3 Crossing=IDH_SELCROSSING_COMMAND 3 Window=IDH_SELWINDOW_COMMAND 3 Lasso=IDH_LASSO_COMMAND 3 Duplicate objects=IDH_SELDUP_COMMAND 3 Select by Object Type 4 Dimensions=IDH_SELDIM_COMMAND 4 Curves=IDH_SELCRV_COMMAND 4 Meshes=IDH_SELMESH_COMMAND 4 Points=IDH_SELPT_COMMAND 4 Polylines=IDH_SELPOLYLINE_COMMAND 4 Polysurfaces=IDH_SELPOLYSRF_COMMAND 4 Surfaces=IDH_SELSRF_COMMAND 4 Spotlights=IDH_SELLIGHT_COMMAND 4 By layer=IDH_SELLAYER_COMMAND 4 Object subparts=IDH_SELECT_SUBPARTS_OF_OBJECTS 2 Shortcuts 3 Keyboard shortcuts=IDH_SHORTCUTS 3 Customize shortcuts=IDH_OPTIONS_DIALOG_BOX_SHORTCUT_KEYS_TAB 3 Aliases=IDH_OPTIONS_DIALOG_BOX_ALIASES_TAB 2 Enter Coordinates 3 Coordinates=IDH_ENTER_COORDINATES_HEADER 3 Distance from the last point=IDH_DISTANCE_CONSTRAINT 3 Angle from the last point=IDH_ANGLE_CONSTRAINT 3 Construction plane coordinates=IDH_ENTER_CONSTRUCTION_PLANE_COORDINATES 3 Relative coordinates=IDH_ENTER_RELATIVE_COORDINATES 3 World coordinates=IDH_ENTER_WORLD_COORDINATES 3 Polar coordinates=IDH_ENTER_POLAR_COORDINATES 3 Relative polar coordinates=IDH_ENTER_RELATIVE_POLAR_COORDINATES 2 Cursor Constraints 3 Angle=IDH_ANGLE_CONSTRAINT 3 Distance=IDH_DISTANCE_CONSTRAINT 3 Elevator=IDH_ELEVATOR_MODE 3 Ortho=IDH_ORTHO_COMMAND 3 Planar=IDH_PLANAR_COMMAND 3 Grid snap=IDH_SNAP_COMMAND 3 TAB to constrain along a line=IDH_TAB_CONSTRAINT 2 Command History 3 Display command history=IDH_COMMANDHISTORY_COMMAND 3 Paste command from Clipboard=IDH_COMMANDPASTE_COMMAND 3 Read commands from text file=IDH_READCOMMANDFILE_COMMAND 2 Object snaps 3 Object snaps=IDH_OBJECT_SNAPS_HEADER>main 3 Turn object snaps off=IDH_NOSNAP_COMMAND 3 End=IDH_END_COMMAND 3 Near=IDH_NEAR_COMMAND 3 Point=IDH_PT_COMMAND 3 Midpoint=IDH_MID_COMMAND 3 Center of an arc or circle=IDH_CEN_COMMAND 3 Intersection of two curves=IDH_INT_COMMAND 3 Perpendicular to a curve=IDH_PERP_COMMAND 3 Tangent to a curve=IDH_TAN_COMMAND 3 Quadrant of a circle or ellipse=IDH_QUAD_COMMAND 3 Knot=IDH_KNOT_COMMAND 3 From a point=IDH_FROM_COMMAND 3 Track perpendicular to a curve=IDH_PERPFROM_COMMAND 3 Track tangent to a curve=IDH_TANFROM_COMMAND 3 Along a line=IDH_ALONG_COMMAND 3 Point on a surface=IDH_ONSRF_COMMAND 3 Project object snap to construction plane=IDH_PROJECTOSNAP_COMMAND 3 Suspend persistent object snaps=IDH_LOCKOSNAP_COMMAND 2 Object Visibility 3 Object visibility=IDH_OBJECT_VISIBILITY_HEADER>main 3 Hide objects=IDH_HIDE_COMMAND 3 Show objects=IDH_SHOW_COMMAND 3 Show selected hidden objects=IDH_SHOWSELECTED_COMMAND 3 Swap hidden and visible objects=IDH_HIDESWAP_COMMAND 3 Lock objects=IDH_LOCK_COMMAND 3 Unlock objects=IDH_UNLOCK_COMMAND 3 Swap locked and unlocked objects=IDH_LOCKSWAP_COMMAND 3 Unlock selected locked objects=IDH_UNLOCKSELECTED_COMMAND 3 Hide control and edit points=IDH_HIDEPT_COMMAND 3 Show hidden control and edit points=IDH_SHOWPT_COMMAND 3 Turn off control points at back of object=IDH_CULLCONTROLPOLYGON_COMMAND 1 Points and Curves 2 Points 3 Draw point objects=IDH_DRAW_POINT_OBJECTS_HEADER>main 3 Draw multiple point objects=IDH_POINTS_COMMAND 3 Find the point closest to an object=IDH_CLOSESTPT_COMMAND 3 Divide a curve by number of segments=IDH_DIVIDE_COMMAND 3 Divide a curve by length=IDH_DIVIDEBYLENGTH_COMMAND 3 Create a grid of point objects=IDH_POINTGRID_COMMAND 3 Place point objects at control points=IDH_EXTRACTPT_COMMAND 3 Draw point at end of curve=IDH_CRVEND_COMMAND 2 Lines and Polylines 3 Draw lines and polylines=IDH_DRAW_LINES_HEADER>main 3 Line=IDH_LINE_COMMAND 3 Multiple lines=IDH_LINES_COMMAND 3 At an angle=IDH_LINEANGLE_COMMAND 3 Perpendicular from a curve=IDH_LINEPERP_COMMAND 3 Perpendicular to two curves=IDH_LINEPP_COMMAND 3 Tangent to two curves=IDH_LINETT_COMMAND 3 Tangent from a curve=IDH_LINETAN_COMMAND 3 From four points=IDH_LINE4PT_COMMAND 3 Normal to a surface=IDH_NORMAL_COMMAND 3 Vertical=IDH_LINEV_COMMAND 3 Bisect two lines=IDH_BISECTOR_COMMAND 3 Polylines 4 Draw multi-segment polyline=IDH_POLYLINE_COMMAND 4 Through point objects=IDH_POLYLINETHROUGHPT_COMMAND 4 Draw on a mesh object=IDH_POLYLINEONMESH_COMMAND 4 Convert curves to polylines=IDH_CONVERTTOPOLYLINE_COMMAND 4 Extract control polygon=IDH_EXTRACTCONTROLPOLYGON_COMMAND 2 Curves 3 Draw curves=IDH_CURVE_MENU_HEADER 3 Curve from two views=IDH_CRV2VIEW_COMMAND 3 Conic section=IDH_CONIC_COMMAND 3 Conic perpendicular to curve=IDH_CONICPERP_COMMAND 3 Helix=IDH_HELIX_COMMAND 3 Spiral=IDH_SPIRAL_COMMAND 3 Interpolate through a polyline=IDH_INTERPPOLYLINE_COMMAND 3 Arcs 4 Draw arcs=IDH_DRAW_ARCS_HEADER 4 Center, start, angle=IDH_ARC_COMMAND 4 Start, end, direction=IDH_ARCDIR_COMMAND 4 Through 3 points=IDH_ARC3PT_COMMAND 4 Tangent to 2 curves=IDH_ARCTTR_COMMAND 3 Free-form Curves 4 Draw free-form curves=IDH_DRAW_FREEFORM_CURVES_HEADER 4 Interpolate points=IDH_INTERPCRV_COMMAND 4 Interpolate on a surface=IDH_INTERPCRVONSRF_COMMAND 4 By control points=IDH_CURVE_COMMAND 3 Sketch Curves 4 Sketch a curve=IDH_SKETCH_COMMAND 4 Sketch on a surface=IDH_SKETCHONSRF_COMMAND 4 Sketch on a polygon mesh=IDH_SKETCHONMESH_COMMAND 3 Curves From Existing Curves 4 Offset=IDH_OFFSET_COMMAND 4 Fillet two curves=IDH_FILLET_COMMAND 4 Chamfer two curves=IDH_CHAMFER_COMMAND 4 Blend between 2 curves=IDH_BLEND_COMMAND 4 Extract curve control polygon=IDH_EXTRACTCONTROLPOLYGON_COMMAND 4 Cross-section through profile=IDH_CSEC_COMMAND 3 Curves From Surfaces and Solids 4 Create curves from surfaces and solids=IDH_CREATE_CURVES_FROM_OTHER_OBJECTS_HEADER 4 Intersect two objects=IDH_INTERSECT_COMMAND 4 Place point objects at control points=IDH_EXTRACTPT_COMMAND 4 Extract From Surface 5 Border=IDH_DUPBORDER_COMMAND 5 Contours=IDH_CONTOUR_COMMAND 5 Edge=IDH_DUPEDGE_COMMAND 5 Isoparms=IDH_EXTRACTISOPARM_COMMAND 5 Sections=IDH_SECTION_COMMAND 5 Silhouettes=IDH_SILHOUETTE_COMMAND 5 UV curves=IDH_CREATEUVCRV_COMMAND 5 Wireframe=IDH_EXTRACTWIREFRAME_COMMAND 5 Extract surface control polygon=IDH_EXTRACTCONTROLPOLYGON_COMMAND 5 Through surface control points=IDH_CRVTHROUGHSRFCONTROLPT_COMMAND 4 Apply to Surface 5 Apply to surface=IDH_APPLYCRV_COMMAND 5 Project=IDH_PROJECT_COMMAND 5 Pull back=IDH_PULL_COMMAND 3 Edit Curves 4 Edit curves=IDH_EDIT_CURVES_HEADER>main 4 Toggle control polygon display=IDH_CONTROLPOLYGON_COMMAND 4 Align two curves=IDH_ALIGNPROFILES_COMMAND 4 Match 2 curves=IDH_MATCH_COMMAND 4 Move seam=IDH_CRVSEAM_COMMAND 4 Trim curve by 2 points=IDH_SUBCRV_COMMAND 4 Extend Curves 5 Extend curves=IDH_EXTEND_CURVES_HEADER 5 Extend=IDH_EXTEND_COMMAND 5 Extend with line=IDH_EXTENDBYLINE_COMMAND 5 Extend with arc=IDH_EXTENDBYARC_COMMAND 5 Extend with arc to point=IDH_EXTENDBYARCTOPT_COMMAND 5 Extend on surface=IDH_EXTENDCRVONSRF_COMMAND 4 Refine Curve Shapes 5 Change curve degree=IDH_CHANGEDEGREE_COMMAND 5 Flatten a section=IDH_INSERTLINEINTOCRV_COMMAND 5 Rebuilds degree and control points=IDH_REBUILD_COMMAND 5 Make curve periodic=IDH_MAKECRVPERIODIC_COMMAND 5 Fit curve to existing curve=IDH_FITCRV_COMMAND 5 Convert to Bezier=IDH_CONVERTTOBEZIERS_COMMAND 5 Adjust end bulge=IDH_ENDBULGE_COMMAND 5 Simplify=IDH_SIMPLIFYCRV_COMMAND 5 Fair=IDH_FAIR_COMMAND 3 Text Objects 4 Create text objects=IDH_TEXTOBJECT_COMMAND 2 Circles 3 Draw circles=IDH_DRAW_CIRCLES_HEADER 3 Center and radius=IDH_CIRCLE_COMMAND 3 By diameter=IDH_CIRCLED_COMMAND 3 Through 3 points=IDH_CIRCLE3PT_COMMAND 3 Tangent to 2 curves=IDH_CIRCLETTR_COMMAND 3 Tangent to 3 curves=IDH_CIRCLETTT_COMMAND 2 Ellipses 3 Draw ellipses=IDH_DRAW_ELLIPSES_HEADER 3 Ellipse=IDH_ELLIPSE_COMMAND 3 Through major axes=IDH_ELLIPSED_COMMAND 2 Polygons 3 Draw polygons=IDH_DRAW_POLYGONS_HEADER 3 By center=IDH_POLYGON_COMMAND 3 By edge=IDH_POLYGONEDGE_COMMAND 2 Rectangles 3 Draw rectangles=IDH_DRAW_RECTANGLES_HEADER 3 From corners=IDH_RECTANGLE_COMMAND 3 From center=IDH_RECTANGLECEN_COMMAND 3 Vertical=IDH_RECTANGLEV_COMMAND 3 Through 3 points=IDH_RECTANGLE3PT_COMMAND 1 Surfaces and Solids 2 Surfaces 3 Draw surfaces=IDH_SURFACE_MENU_HEADER 3 From corner points=IDH_SRFPT_COMMAND 3 From edge curves=IDH_EDGESRF_COMMAND 3 One-rail sweep=IDH_SWEEP1_COMMAND 3 Two-rail sweep=IDH_SWEEP2_COMMAND 3 Revolve a curve=IDH_REVOLVE_COMMAND 3 Revolve with a rail=IDH_RAILREVOLVE_COMMAND 3 Loft=IDH_LOFT_COMMAND 3 From Curve Network=IDH_NETWORKSRF_COMMAND 3 Patch surface=IDH_PATCH_COMMAND 3 Drape surface over objects=IDH_DRAPE_COMMAND 3 Unroll (flatten) developable surface=IDH_UNROLLSRF_COMMAND 3 From grid of points=IDH_SRFPTGRID_COMMAND 3 From grid of control points=IDH_SRFCONTROLPTGRID_COMMAND 3 By color values of a bitmap=IDH_HEIGHTFIELD_COMMAND 3 Planar Surfaces 4 Draw planes=IDH_DRAW_PLANES_HEADER 4 Through planar curves=IDH_PLANARSRF_COMMAND 4 Through points=IDH_PLANETHROUGHPT_COMMAND 4 Cutting plane through objects=IDH_CUTPLANE_COMMAND 4 Rectangles 5 Rectangle=IDH_PLANE_COMMAND 5 Vertical=IDH_PLANEV_COMMAND 5 Through three points=IDH_PLANE3PT_COMMAND 3 Extrude Curves 4 Extrude curves into surfaces=IDH_EXTRUDE_SURFACES_HEADER 4 Extrude curve=IDH_EXTRUDE_COMMAND 4 Extrude curve along path=IDH_EXTRUDEALONGCRV_COMMAND 4 Extrude curve to a point=IDH_EXTRUDETOPT_COMMAND 4 Extrude by offsetting a curve=IDH_RIBBON_COMMAND 3 Edit Surfaces 4 Edit surfaces=IDH_EDIT_SURFACES_HEADER 4 Extend=IDH_EXTENDSRF_COMMAND 4 Chamfer 2 surfaces=IDH_CHAMFERSRF_COMMAND 4 Fillet 2 surfaces=IDH_FILLETSRF_COMMAND 4 Offset=IDH_OFFSETSRF_COMMAND 4 Blend between 2 surfaces=IDH_BLENDSRF_COMMAND 4 Variable radius blend between surfaces=IDH_VRBSRF_COMMAND 4 Extract from polysurface=IDH_EXTRACTSRF_COMMAND 4 Split surface with its isoparms=IDH_SPLITSRF_COMMAND 4 Merge 2 surfaces=IDH_MERGESRF_COMMAND 4 Match 2 surfaces=IDH_MATCHSRF_COMMAND 4 Refine Surface Shapes 5 Change degree=IDH_CHANGEDEGREESRF_COMMAND 5 Change degree and point count=IDH_REBUILDSRF_COMMAND 5 Remove trim curve=IDH_UNTRIM_COMMAND 5 Detach trim curve=IDH_DETACHTRIM_COMMAND 5 Shrink underlying surface to trim boundary=IDH_SHRINKTRIMMEDSRF_COMMAND 5 Make periodic=IDH_MAKESRFPERIODIC_COMMAND 5 Make non-periodic=IDH_MAKESRFNONPERIODIC_COMMAND 2 Solids 3 Draw solids=IDH_SOLID_MENU_HEADER 3 Cone=IDH_CONE_COMMAND 3 Truncated cone=IDH_TCONE_COMMAND 3 Cylinder=IDH_CYLINDER_COMMAND 3 Pipe=IDH_PIPE_COMMAND 3 Torus=IDH_TORUS_COMMAND 3 Tube=IDH_TUBE_COMMAND 3 Extrude a surface=IDH_EXTRUDESRF_COMMAND 3 Extrude a planar curve=IDH_EXTRUDE_COMMAND 3 Cap open planar holes=IDH_CAP_COMMAND 3 Boxes 4 Box - length, width, height=IDH_BOX_COMMAND 4 Box - edge, width, height=IDH_BOX3PT_COMMAND 3 Ellipsoids 4 Baseball ellipsoid=IDH_BASEBALLELLIPSOID_COMMAND 4 Ellipsoid=IDH_ELLIPSOID_COMMAND 3 Spheres 4 Baseball=IDH_BASEBALL_COMMAND 4 Sphere by center, radius=IDH_SPHERE_COMMAND 4 Sphere by diameter=IDH_SPHERED_COMMAND 4 Sphere from 3 points=IDH_SPHERE3PT_COMMAND 3 Edit Solids 4 Fillet solid edges=IDH_FILLETEDGE_COMMAND 4 Troubleshooting fillets and chamfers=IDH_TROUBLESHOOTING_FILLETS_AND_CHAMFERS 4 Booleans 5 Booleans=IDH_BOOLEAN_HEADER 5 Boolean union=IDH_BOOLEANUNION_COMMAND 5 Boolean difference=IDH_BOOLEANDIFFERENCE_COMMAND 5 Boolean intersection=IDH_BOOLEANINTERSECTION_COMMAND 5 When Booleans fail=IDH_WHEN_BOOLEANS_FAIL 2 Text Objects 3 Create text objects=IDH_TEXTOBJECT_COMMAND 1 Transforms 2 Transforms=IDH_TRANSFORM_MENU_HEADER 2 Move=IDH_MOVE_COMMAND 2 Copy=IDH_COPY_COMMAND 2 Mirror=IDH_MIRROR_COMMAND 2 Shear=IDH_SHEAR_COMMAND 2 Set control point locations=IDH_SETPT_COMMAND 2 Duplicate an object=IDH_DUP_COMMAND 2 Project object to construction plane=IDH_PROJECTTOCPLANE_COMMAND 2 Twist=IDH_TWIST_COMMAND 2 Bend=IDH_BEND_COMMAND 2 Taper=IDH_TAPER_COMMAND 2 Flow objects along a curve=IDH_FLOW_COMMAND 2 Smooth=IDH_SMOOTH_COMMAND 2 Remap objects to new CPlane=IDH_REMAPCPLANE_COMMAND 2 Rotate 3 Rotate on construction plane=IDH_ROTATE_COMMAND 3 Rotate in 3-D=IDH_ROTATE3D_COMMAND 2 Orient 3 Orient objects=IDH_ORIENT_OBJECTS_HEADER>main 3 Orient=IDH_ORIENT_COMMAND 3 By 3 points=IDH_ORIENT3PT_COMMAND 3 On a surface=IDH_ORIENTONSRF_COMMAND 3 On a curve=IDH_ORIENTPERPTOCRV_COMMAND 2 Scale 3 Scale objects=IDH_SCALE_OBJECTS_HEADER>main 3 In 1 dimension=IDH_SCALE1D_COMMAND 3 In 2 dimensions=IDH_SCALE2D_COMMAND 3 In 3 dimensions=IDH_SCALE_COMMAND 3 Non-uniformly=IDH_SCALENU_COMMAND 2 Array 3 Array objects=IDH_ARRAY_OBJECTS_HEADER>main 3 Rectangular=IDH_ARRAY_COMMAND 3 Polar=IDH_ARRAYPOLAR_COMMAND 3 Along curve=IDH_ARRAYCRV_COMMAND 3 On surface=IDH_ARRAYSRF_COMMAND 1 Edit Objects 2 Edit objects=IDH_EDIT_MENU_HEADER 2 Undo=IDH_UNDO_COMMAND 2 Redo=IDH_REDO_COMMAND 2 Cut=IDH_CUT_COMMAND 2 Copy to Clipboard=IDH_COPYCLIP_COMMAND 2 Paste from Clipboard=IDH_PASTE_COMMAND 2 Explode=IDH_EXPLODE_COMMAND 2 Trim=IDH_TRIM_COMMAND 2 Split=IDH_SPLIT_COMMAND 2 Join 3 Join=IDH_JOIN_COMMAND 3 Join surfaces=IDH_JOINSRF_COMMAND 2 Delete 3 Delete=IDH_DELETE_COMMAND 3 Delete all objects=IDH_DELETEALL_COMMAND 3 Erase=IDH_ERASE_COMMAND 2 Edit Control Points 3 Point editing=IDH_POINT_EDITING_HEADER>main 3 Delete control points on curves=IDH_DELETE_CONTROL_POINTS_ON_CURVES 3 Insert edit points in curve=IDH_INSERTEDITPOINT_COMMAND 3 Insert kink in curve=IDH_INSERTKINK_COMMAND 3 Edit using handlebars=IDH_HBAR_COMMAND 3 Weight=IDH_WEIGHT_COMMAND 3 Point Visiblity 4 Control points on=IDH_PTON_COMMAND 4 Edit points on=IDH_EDITPTON_COMMAND 4 Control and edit points off=IDH_PTOFF_COMMAND 4 Points off on selected objects=IDH_PTOFFSELECTED_COMMAND 4 Hide points=IDH_HIDEPT_COMMAND 4 Show hidden points=IDH_SHOWPT_COMMAND 3 Select Points 4 Lasso=IDH_LASSO_COMMAND 4 Connected control points=IDH_SELCONNECTED_COMMAND 4 Select U and V Points 5 Next in v-direction=IDH_NEXTV_COMMAND 5 Next in u-direction=IDH_NEXTU_COMMAND 5 Previous in u-direction=IDH_PREVU_COMMAND 5 Previous in v-direction=IDH_PREVV_COMMAND 5 All in the u-direction=IDH_SELU_COMMAND 5 All in the v-direction=IDH_SELV_COMMAND 5 All in the u- and v-direction=IDH_SELUV_COMMAND 5 Add next u=IDH_ADDNEXTU_COMMAND 5 Add previous u=IDH_ADDPREVU_COMMAND 5 Add next v=IDH_ADDNEXTV_COMMAND 5 Add previous v=IDH_ADDPREVV_COMMAND 3 Knots 4 Insert=IDH_INSERTKNOT_COMMAND 4 Remove=IDH_REMOVEKNOT_COMMAND 1 Object Properties and Layers 2 Edit object properties=IDH_PROPERTIES_COMMAND 2 Layers 3 Use layers 4 Use layers=IDH_LAYER_COMMAND 4 Change an object's layer=IDH_CHANGELAYER_COMMAND 4 Change an object's layer to the current layer=IDH_CHANGETOCURRENTLAYER_COMMAND 4 Match the layer of one object to another=IDH_MATCHLAYER_COMMAND 3 Manage layers 4 Manage layers=IDH_LAYER_COMMAND 4 Select=IDH_SELECTING_LAYERS 4 Set current=IDH_SETLAYER_COMMAND 4 New=IDH_LAYER_NEW 4 Rename=IDH_LAYER_RENAME 4 Delete=IDH_LAYER_DELETE 4 Change color=IDH_LAYER_CHANGE_COLOR 4 Turn on=IDH_LAYERON_COMMAND 4 Turn all on=IDH_ALLLAYERSON_COMMAND 4 Turn one on and the rest off=IDH_ONELAYERON_COMMAND 4 Lock=IDH_LAYERLOCK_COMMAND 4 Turn off=IDH_LAYEROFF_COMMAND 4 Filter the layer list=IDH_LAYER_FILTER 1 Shade and Render 2 Shade 3 Shaded working mode=IDH_SHADEDVIEWPORT_COMMAND 3 Shade=IDH_SHADE_HEADER>main 3 Options=IDH_OPTIONS_DIALOG_BOX_SHADE_TAB 3 Current viewport=IDH_SHADE_COMMAND 3 All viewports=IDH_SHADEALL_COMMAND 3 Selected objects=IDH_SHADESELECTED_COMMAND 3 With grid=IDH_SHADE1_COMMAND 3 With wireframe=IDH_WIRESHADE1_COMMAND 3 No smoothing=IDH_FLATSHADE_COMMAND 3 With grid/no smoothing=IDH_FLATSHADE1_COMMAND 3 All viewports with grid/no smoothing=IDH_FLATSHADEALL_COMMAND 3 Toggle OpenGL and monochrome mode=IDH_SETGLSHADE_COMMAND 3 Dynamic shade for point editing 4 Toggle dynamic shade=IDH_DYNAMICSHADING_COMMAND 4 Toggle dynamic shade in perspective view=IDH_DYNAMICSHADINGPERSPECTIVE_COMMAND 3 Clear Render Meshes 4 All=IDH_CLEARALLMESHES_COMMAND 4 From selected objects=IDH_REFRESHSHADE_COMMAND 2 Render 3 Render=IDH_RENDER_HEADER 3 Options=IDH_OPTIONS_DIALOG_BOX_RENDER_TAB 3 Image in current viewport=IDH_RENDER_COMMAND 3 Preview=IDH_RENDERPREVIEW_COMMAND 3 Preview all viewports=IDH_RENDERPREVIEWALL_COMMAND 3 Preview selected objects=IDH_RENDERPREVIEWSELECTED_COMMAND 3 Preview selected objects all viewports=IDH_RENDERPREVIEWSELECTEDALL_COMMAND 3 Show render mesh for surfaces=IDH_RENDERAGEDGES_COMMAND 3 Render mesh options=IDH_OPTIONS_DIALOG_BOX_RENDER_TAB_RENDER_MESH_DIALOG 3 Insert plane for displaying bitmaps=IDH_PICTUREFRAME_COMMAND 3 Spotlights 4 Insert=IDH_SPOTLIGHT_COMMAND 4 Set hotspot=IDH_HOTSPOT_COMMAND 1 Polygon Meshes 2 Mesh Objects 3 Mesh from NURBS object=IDH_MESH_COMMAND 3 3-D face=IDH_3DFACE_COMMAND 3 Box=IDH_MESHBOX_COMMAND 3 Plane=IDH_MESHPLANE_COMMAND 3 Cylinder=IDH_MESHCYLINDER_COMMAND 3 Cone=IDH_MESHCONE_COMMAND 3 Sphere=IDH_MESHSPHERE_COMMAND 2 Mesh Tools 3 Polygon mesh tools=IDH_POLYGON_MESH_TOOLS_HEADER>main 3 Set mesh density=IDH_MESHDENSITY_COMMAND 3 Explode=IDH_EXPLODEMESH_COMMAND 3 Join=IDH_JOINMESH_COMMAND 3 Weld vertices=IDH_WELD_COMMAND 3 Set normal=IDH_UNIFYMESHNORMALS_COMMAND 3 Apply to surface=IDH_APPLYMESH_COMMAND 3 From closed polyline=IDH_MESHPOLYLINE_COMMAND 3 From surface control points=IDH_EXTRACTCONTROLPOLYGON_COMMAND 3 Convert mesh faces into NURBS surface=IDH_MESHTONURB_COMMAND 3 Reduce number of faces=IDH_REDUCEMESH_COMMAND 3 Select naked edge points=IDH_SELNAKEDMESHEDGEPT_COMMAND 1 Options 2 Aliases=IDH_OPTIONS_DIALOG_BOX_ALIASES_TAB 2 Appearance=IDH_OPTIONS_DIALOG_BOX_APPEARANCE_TAB 2 Dimensions=IDH_OPTIONS_DIALOG_BOX_DIMENSIONS_TAB 2 Files=IDH_OPTIONS_DIALOG_BOX_FILES_TAB 2 General=IDH_OPTIONS_DIALOG_BOX_GENERAL_TAB 2 Grid=IDH_OPTIONS_DIALOG_BOX_GRID_TAB 2 Modeling aids=IDH_OPTIONS_DIALOG_BOX_MODELING_AIDS_TAB 2 Render=IDH_OPTIONS_DIALOG_BOX_RENDER_TAB 2 Render mesh=IDH_OPTIONS_DIALOG_BOX_RENDER_TAB_RENDER_MESH_DIALOG 2 Shade=IDH_OPTIONS_DIALOG_BOX_SHADE_TAB 2 Shortcut keys=IDH_OPTIONS_DIALOG_BOX_SHORTCUT_KEYS_TAB 2 Units=IDH_OPTIONS_DIALOG_BOX_UNITS_TAB 2 View=IDH_OPTIONS_DIALOG_BOX_VIEW_TAB 1 Toolbar Layout 2 Change your toolbar layout=IDH_TOOLBAR_COMMAND>main 2 Open=IDH_OPENWORKSPACE_COMMAND 2 Save=IDH_SAVEWORKSPACE_COMMAND 2 Save as a different name=IDH_SAVEWORKSPACEAS_COMMAND 2 Toolbars 3 Open=IDH_TOOLBAR_OPEN 3 Close=IDH_TOOLBAR_CLOSE 3 Move=IDH_TOOLBAR_MOVE 3 New=IDH_TOOLBAR_NEW 3 Delete=IDH_TOOLBAR_DELETE 3 Rename=IDH_TOOLBAR_RENAME 3 Toggle display=IDH_TOGGLETOOLBAR_COMMAND 3 Hide=IDH_HIDETOOLBAR_COMMAND 3 Show hidden=IDH_SHOWTOOLBAR_COMMAND 3 Dock=IDH_TOOLBAR_DOCK 3 Minimize=IDH_TOOLBAR_MINIMIZE 3 Restore minimized=IDH_TOOLBAR_RESTORE_MINIMIZED 3 Reshape=IDH_TOOLBAR_RESHAPE 3 Float=IDH_TOOLBAR_FLOAT 3 Import from file=IDH_TOOLBAR_IMPORT 3 Flyout Toolbars 4 Flyout a toolbar=IDH_TOOLBAR_CASCADE 4 Hide=IDH_TOOLBAR_HIDE_CASCADED 4 Tear off=IDH_TOOLBAR_TEAR_OFF 4 Unlink=IDH_TOOLBAR_UNLINK 4 Create=IDH_TOOLBAR_CREATE_CASCADE 4 Create a floating flyout button=IDH_TOOLBAR_FLOAT_BUTTONS 3 Toolbar buttons 4 Toolbar buttons=IDH_MANAGE_TOOLBAR_BUTTONS_HEADER 4 New=IDH_TOOLBAR_NEW_BUTTON 4 Delete=IDH_TOOLBAR_DELETE_BUTTON 4 Move=IDH_TOOLBAR_MOVE_BUTTON 4 Copy=IDH_TOOLBAR_COPY_BUTTON 4 Edit a toolbar button 5 Edit a toolbar button=IDH_EDIT_A_TOOLBAR_BUTTON 5 Tooltip=IDH_CHANGE_THE_COMMAND_BUTTON_TOOLTIP 5 Program functions=IDH_PROGRAMMING_THE_COMMAND_BUTTON_FUNCTIONS 5 Edit button bitmap icons 6 Edit toolbar button bitmap icons=IDH_EDIT_BITMAP_DIALOG_BOX 6 Draw or edit icon=IDH_TOOLBAR_EDIT_ICON 6 Clear=IDH_TOOLBAR_CLEAR_BITMAP_IMAGE 6 Capture a portion of the screen=IDH_TOOLBAR_CAPTURE_ICON 6 Import=IDH_TOOLBAR_IMPORT_BITMAP 6 Save=IDH_TOOLBAR_SAVE_ICON 1 File Operations 2 File menu=IDH_FILE_MENU_HEADER 2 File options=IDH_OPTIONS_DIALOG_BOX_FILES_TAB 2 New=IDH_NEW_COMMAND 2 Open=IDH_OPEN_COMMAND 2 Exit=IDH_EXIT_COMMAND 2 Save and Print 3 Save 4 Save your model=IDH_SAVE_COMMAND>Second 4 Save as a different name=IDH_SAVEAS_COMMAND 4 Autosave=IDH_AUTOSAVE_COMMAND>Second 4 Save a template=IDH_SAVEASTEMPLATE_COMMAND>Second 4 Incremental save=IDH_INCREMENTALSAVE_COMMAND 3 Print 4 Print setup=IDH_PRINTSETUP_COMMAND>Second 4 Print=IDH_PRINT_COMMAND 2 Customize Rhino 3 Edit the Rhino.ini file=IDH_EDIT_THE_RHINO_INI_FILE 1 Import and Export 2 Import=IDH_IMPORT_COMMAND 2 Export=IDH_EXPORT_COMMAND 2 File Formats 3 Supported file formats=IDH_IMPORT_AND_EXPORT_FORMATS_HEADER>main 3 AutoCAD 4 DWG=IDH_AUTOCAD_DWG_IMPORT_EXPORT 4 DXF=IDH_AUTOCAD_DXF_IMPORT_EXPORT 4 DWG/DXF export options=IDH_AUTOCAD_EXPORT_OPTIONS 4 Mechanical Desktop=IDH_IGES_MECHANICAL_DESKTOP 4 Moldex DXF=IDH_MOLDEX_COMMAND 3 3D Studio 4 Import and export=IDH_3DS_IMPORT_EXPORT 4 3D Studio MAX 3.0 IGES=IDH_IGES_3DS_MAX_3 4 3D Studio MAX 3.0 OBJ=IDH_3D_STUDIO_MAX_3_0_OBJ_FILE_EXCHANGE 4 3DS MAX 1.2 file import plug-in=IDH_3DS_MAX_1_2_IMPORT_PLUG_IN 4 3DS MAX 2.0 file import plug-in=IDH_3DS_MAX_2_0_IMPORT_PLUG_IN 4 3DS MAX 2.5 file import plug-in=IDH_3DS_MAX_2_5_IMPORT_PLUG_IN 4 DirectX=IDH_DIRECTX_EXPORT 3 Lightwave 4 Lightwave LWO=IDH_LWO_IMPORT_EXPORT 3 IGES 4 Importing and exporting IGES files=IDH_IGES_IMPORT_EXPORT 4 Edit IGES export types=IDH_IGES_EXPORT_EDIT_IGES_TYPES 4 Exporting meshes=IDH_IGES_MESH_EXPORT 4 IGES export type details=IDH_IGES_EXPORT_TYPE_DETAILS 4 IGES level to Rhino layer translation=MID_IGES_LEVEL_TO_LAYER_TRANSLATION 4 Troubleshooting IGES export problems=MID_Troubleshooting_IGES_Export_Problems 4 IGES File Types 5 3DS MAX 3.0=IDH_IGES_3DS_MAX_3 5 Alias=IDH_IGES_ALIAS 5 Ashlar Vellum=IDH_IGES_ASHLAR_VELLUM 5 AutoShip=IDH_IGES_AUTOSHIP 5 Autoform=IDH_IGES_AUTOFORM 5 Breault Research's ASAP=IDH_IGES_BREAULT_RESEARCH_ASAP 5 CamSoft=IDH_IGES_CAMSOFT 5 CATIA=IDH_IGES_CATIA 5 CADCEUS=IDH_IGES_CADCEUS 5 Cosmos/M=IDH_IGES_COSMOS_M 5 Delcam=IDH_IGES_DELCAM 5 FastShip=IDH_IGES_FASTSHIP 5 FastSURF=IDH_IGES_FASTSURF 5 Integrity Ware=IDH_IGES_INTEGRITY_WARE 5 IronCAD=IDH_IGES_IRONCAD 5 LUSAS=IDH_IGES_LUSAS 5 Mastercam=IDH_IGES_MASTERCAM 5 Maya=IDH_IGES_MAYA 5 ME30=IDH_IGES_ME30 5 Mechanical Desktop=IDH_IGES_MECHANICAL_DESKTOP 5 Microstation=IDH_IGES_MICROSTATION 5 Multisurf=IDH_IGES_MULTISURF 5 NuGraf=IDH_IGES_NUGRAF 5 OptiCAD=IDH_IGES_OPTICAD 5 Pro/E=IDH_IGES_PRO_E 5 SDRC's I-DEAS=IDH_IGES_SDRC_IDEAS 5 Solid Designer=IDH_IGES_SOLID_DESIGNER 5 Solid Edge=IDH_IGES_SOLID_EDGE 5 Softimage=IDH_IGES_SOFTIMAGE 5 SolidWorks=IDH_IGES_SOLIDWORKS 5 SUM4=IDH_IGES_SUM4 5 SURFCAM=IDH_IGES_SURFCAM 5 TekSoft=IDH_IGES_TEKSOFT 5 Unigraphics=IDH_IGES_UNIGRAPHICS 3 File Formats 4 ACIS SAT=IDH_ACIS_FILE_EXPORT 4 Adobe Illustrator=IDH_ADOBE_ILLUSTRATOR_IMPORT_EXPORT 4 Applied Geometry AG=IDH_AG_IMPORT_EXPORT 4 DirectX=IDH_DIRECTX_EXPORT 4 PostScript=IDH_POSTSCRIPT_EXPORT 4 POV-Ray=IDH_POV_EXPORT 4 Moldex=IDH_MOLDEX_COMMAND 4 Parasolid X_T=IDH_PARASOLID_X_T_FILE_EXPORT 4 Raw triangle=IDH_RAW_IMPORT_EXPORT 4 RenderMan RIB=IDH_RIB_EXPORT 4 STL=IDH_STL_IMPORT_EXPORT 4 UDO Export Moray=IDH_MORAY_UDO_EXPORT 4 VRML=IDH_VRML_EXPORT 4 Wavefront OBJ=IDH_OBJ_EXPORT 4 Windows Metafiles=IDH_WMF_EXPORT 1 Annotation 2 Make 2-D drawing=IDH_MAKE2D_COMMAND 2 Annotate 3 Annotate=IDH_ANNOTATE>main 3 Text blocks=IDH_TEXT_COMMAND 3 Leaders=IDH_LEADER_COMMAND 3 Dot=IDH_DOT_COMMAND 3 Arrow=IDH_ARROW_COMMAND 3 Arrowhead=IDH_ARROWHEAD_COMMAND 2 Dimensions 3 Dimensions=IDH_DIMENSION_HEADER 3 Horizontal=IDH_DIMHORIZONTAL_COMMAND 3 Vertical=IDH_DIMVERTICAL_COMMAND 3 Aligned=IDH_DIMALIGNED_COMMAND 3 Rotated=IDH_DIMROTATED_COMMAND 3 Angular=IDH_DIMANGLE_COMMAND 3 Diameter=IDH_DIMDIAMETER_COMMAND 3 Radius=IDH_DIMRADIUS_COMMAND 3 Leaders=IDH_LEADER_COMMAND 3 Recenter dimension text=IDH_DIMRECENTERTEXT_COMMAND 3 Dimension options=IDH_OPTIONS_DIALOG_BOX_DIMENSIONS_TAB 2 Add notes to your model 3 Notes=IDH_NOTES_COMMAND>Second 1 Analysis 2 Analysis tools=IDH_ANALYZE_MENU_HEADER 2 Display information about object=IDH_WHAT_COMMAND 2 Recalculate surface normals=IDH_REMOVEFLIPPEDNORMALS_COMMAND 2 Curve bounding box=IDH_BOUNDINGBOX_COMMAND 2 Display location of a point=IDH_EVALUATEPOINT_COMMAND 2 Deviation of points from curve or surface=IDH_POINTDEVIATION_COMMAND 2 Create points from UV coordinates=IDH_POINTSFROMUV_COMMAND 2 Display curve or surface domain=IDH_DOMAIN_COMMAND 2 Reparameterize an object=IDH_IMPROVE_COMMAND 2 Measure 3 Angle between lines=IDH_ANGLE_COMMAND 3 Distance between points=IDH_DISTANCE_COMMAND 3 Deviation between 2 curves=IDH_CRVDEVIATION_COMMAND 2 Curve and Surface Direction 3 Display=IDH_DIR_COMMAND 3 Flip=IDH_FLIP_COMMAND 2 Analyze surfaces 3 Analyze surfaces=IDH_ANALYZE_SURFACES_HEADER 3 Analyze surface with stripes=IDH_ZEBRA_COMMAND 3 Surface environment map=IDH_EMAP_COMMAND 3 Analyze draft angle=IDH_DRAFTANGLEANALYSIS_COMMAND 3 Surface Curvature 4 Surface curvature=IDH_CURVATURESRF_COMMAND 4 Curvature analysis=IDH_CURVATUREANALYSIS_COMMAND 4 Evaluate UV point=IDH_EVALUATEUVPT_COMMAND 2 Analyze curves 3 Analyze curves=IDH_ANALYZE_CURVES_HEADER 3 Curvature=IDH_CURVATURE_COMMAND 3 Length=IDH_LENGTH_COMMAND 3 Radius=IDH_RADIUS_COMMAND 3 Geometric continuity=IDH_GCON_COMMAND 3 Curvature Graph 4 On=IDH_CURVATUREGRAPHON_COMMAND 4 Off=IDH_CURVATUREGRAPHOFF_COMMAND 2 Edge tools 3 Analyze edge tools=IDH_ANALYZE_EDGE_TOOLS_HEADER 3 Show surface edges=IDH_SHOWEDGES_COMMAND 3 Show unjoined (naked) edges=IDH_SHOWNAKEDEDGES_COMMAND 3 Create points at naked edges=IDH_POINTSATNAKEDEDGES_COMMAND 3 Split surface edge=IDH_SPLITEDGE_COMMAND 3 Merge adjacent surface edges=IDH_MERGEEDGE_COMMAND 3 Join out of tolerance surface edges=IDH_JOINEDGE_COMMAND 3 Rebuild surface edges=IDH_REBUILDEDGES_COMMAND 2 Mass properties 3 Mass properties=IDH_MASS_PROPERTIES_HEADER 3 Area=IDH_AREA_COMMAND 3 Area centroid=IDH_AREACENTROID_COMMAND 3 Area moments=IDH_AREAMOMENTS_COMMAND 3 Volume=IDH_VOLUME_COMMAND 3 Volume centroid=IDH_VOLUMECENTROID_COMMAND 3 Volume moments=IDH_VOLUMEMOMENTS_COMMAND 2 Diagnostics 3 Diagnostics=IDH_DIAGNOSTICS_HEADER 3 List surface data structure=IDH_LIST_COMMAND 3 Check data structure=IDH_CHECK_COMMAND 3 Select objects that don't pass Check=IDH_SELBADOBJECTS_COMMAND 3 Show broken edges=IDH_SHOWBROKENEDGES_COMMAND 1 Scripting 2 Scripting tools=IDH_SCRIPTING_TOOLS_HEADER>main 2 Use Enter in script=IDH_ENTER_COMMAND 2 Close display window=IDH_CLOSEDISPLAYWINDOW_COMMAND 2 Copy display window to Clipboard=IDH_COPYDISPLAYWINDOWTOCLIPBOARD_COMMAND 2 Viewport Manipulation 3 Close=IDH_CLOSEVIEWPORT_COMMAND 3 Set active=IDH_SETACTIVEVIEWPORT_COMMAND 3 Maximize=IDH_MAXVIEWPORT_COMMAND 3 Set maximized=IDH_SETMAXIMIZEDVIEWPORT_COMMAND 3 Next=IDH_NEXTVIEWPORT_COMMAND 3 Previous=IDH_PREVVIEWPORT_COMMAND 3 Next parallel=IDH_NEXTORTHOVIEWPORT_COMMAND 3 Next perspective=IDH_NEXTPERSPECTIVEVIEWPORT_COMMAND 3 Copy view to all viewports=IDH_COPYVIEWTOALL_COMMAND 3 Next to top=IDH_NEXTVIEWPORTTOTOP_COMMAND 2 Capture the Rhino Screen 3 To Clipboard=IDH_SCREENCAPTURETOCLIPBOARD_COMMAND 3 To file=IDH_SCREENCAPTURETOFILE_COMMAND 3 To 256-color file=IDH_SCREENCAPTURETOFILE256_COMMAND 1 Appearance 2 Appearance options=IDH_OPTIONS_DIALOG_BOX_APPEARANCE_TAB 2 Grid options=IDH_OPTIONS_DIALOG_BOX_GRID_TAB 2 Command line options 3 Maximize Rhino window=IDH_MAXIMIZE_COMMAND 3 Minimize Rhino window=IDH_MINIMIZE_COMMAND 3 Restore Rhino window=IDH_RESTORE_COMMAND 3 Toggle menu display=IDH_MENU_COMMAND 1 Digitizing 2 Use 3-D digitizer=IDH_3D_DIGITIZING_HEADER 2 Start digitizer=IDH_DIG_COMMAND 2 Disconnect=IDH_DIGDISCONNECT_COMMAND 2 Calibrate=IDH_DIGCALIBRATE_COMMAND 2 Set scale=IDH_DIGSCALE_COMMAND 2 Pause=IDH_DIGPAUSE_COMMAND 2 Sketch=IDH_DIGSKETCH_COMMAND 2 Create planar sections=IDH_DIGSECTION_COMMAND 2 Pick point=IDH_DIGCLICK_COMMAND 2 Set sketch spacing=IDH_DIGSPACING_COMMAND 2 Use Faro=IDH_FARO_COMMAND 2 Use Microscribe=IDH_MSCRIBE_COMMAND