106 Insert the manufacturer's installation disk, and then make sure that the correct drive is selected below.
107 Insert %1 into the drive selected below, and then click OK.
108 Type the path where the file is located, and then click OK.
109 Insert Disk
110 Copy Error
111 Setup cannot copy the file %1.
112 If you cancel copying this file Windows might not work correctly. Are you sure you want to cancel this file?
113 If you cancel now Windows might not work correctly. Are you sure you want to cancel?
114 Ensure that the manufacturer's disk is properly inserted in the drive selected below, or provide the location where the file can be found.
115 Ensure that the disk labeled '%1' is in the drive selected below, or provide the location where the file can be found.
116 Ensure that the location specified below is correct, or change it and insert '%1' in the drive you specify.
117 Warning
120 Error Details
121 Error
122 Rename Error
123 Delete Error
124 Backup Error
125 Do you want to continue Setup without copying this file?
126 &Retry
127 unspecified language
128 unknown language
142 Backup %1
143 From %1
144 To %1
145 %1
146 %1 -- Copying Files...
147 Copying Files...
148 %1 -- Renaming Files...
149 Renaming Files...
150 %1 -- Deleting Files...
151 Deleting Files...
152 %1 -- Backup Files...
153 Backup Files...
154 Cannot copy file to destination directory
155 Installation is not yet completed. Are you sure you want to cancel?
200 %s: The following models are compatible with your hardware. Click the one you want to set up, and then click OK.
201 Click the %s that matches your hardware, and then click OK. If you don't know which model you have, click OK.
205 If your model is not on the list, click Show All Devices.
206 If you have an installation disk for this device, click Have Disk.
212 This list shows only what was found on the installation disk.
309 Install From Disk
430 Select the manufacturer and model of your hardware device and then click Next. If you have a disk that contains the driver you want to install, click Have Disk.
704 Select Device
1000 Resource type
1001 Setting
1002 You cannot modify the resources for this device directly. To change its resources, change the resources of its parent device.
1003 Basic configuration
1005 Memory Range
1006 Input/Output Range
1007 Direct Memory Access
1008 Interrupt Request
1009 interrupt request
1010 direct memory access
1011 memory range
1012 input/output range
1014 Override configuration
1020 Before you can use this forced configuration, resources marked with '?' must be explicitly set
1022 This device isn't using any resources because it is not currently enabled.
1023 This device isn't using any resources because it has a problem.
1024 This device cannot find enough free resources that it can use.\n\nIf you want to use this device, you will need to disable one of the other devices on this system.
1025 The resources this device is using do not match any of its known configurations. To assign resources manually for this device, click Set Configuration Manually.
1026 No Modifications Allowed
1027 Enter the %s you would like to set for this device.\n\n
1028 You may either enter a specific range and the nearest valid range will be automatically selected, or you may select a range using the up and down arrows.
1029 Edit Resource Setting
1030 The setting you entered, %s, is not valid for this device.\n\n
1031 The next valid setting of %s has been chosen automatically.\n\n
1032 Would you like to continue using the new setting?
1033 Either the starting or ending value you entered is invalid.\n\nCheck that the starting and ending values are between 0x00000000 and 0xFFFFFFFF.
1034 Either the starting or ending value you entered is invalid.\n\nCheck that the starting and ending values are between 0x0000 and 0xFFFF.
1035 The direct memory access (DMA) value entered is invalid.\n\nCheck that the DMA value is between 0 and 7.
1036 The interrupt request (IRQ) value entered is invalid.\n\nPlease check that the IRQ value is between 0 and 15.
1037 Warning: The setting you have chosen conflicts with another device.\n\nTo select a different resource setting, click No. To continue, click Yes.
1038 Conflict Warning
1049 No conflict information is currently available.
1050 You cannot modify the resources in this configuration. Try choosing a different configuration in the 'Settings Based On' box.
1051 This resource setting cannot be modified in this configuration. Try choosing a different configuration in the 'Settings Based On' box.
1052 Enter the %s you would like to set for this device.\n\n
1053 You may either enter a specific value and the nearest valid value will be automatically selected, or you may select a value using the up and down arrows.
1054 Edit %s
1055 Windows cannot determine if the setting you have chosen conflicts with another device.
1056 Unknown
1057 The setting you have chosen does not conflict with any other devices.
1058 No devices are conflicting.
1060 Creating a Forced Configuration
1061 You adjusted one or more resource settings manually.\n\n
1062 If you continue, these settings will be assigned to the device.\n\n
1063 Do you want to continue?
1065 Warning: The setting you have chosen conflicts with the following device(s):
1066 %1!s! %2!s! used by:\n
1067 No conflicts.
1068 This device does not require any resources.
1069 First select the resource you wish to edit.
1071 %1!s! %2!s! not available.\n
1072 Windows cannot determine if there are any resource conflicts for this device.
1073 Unknown Device
1074 model
1075 Warning: The setting you have chosen may not work due to the following reason(s):
1076 The resource is unavailable
1077 Current configuration
1101 Memory Range
1102 I/O Range
1103 DMA
1104 IRQ
1107 Unknown
2000 Setup Information
2001 Precompiled Setup Information
2011 Model
2012 Manufacturer
2013 This driver is digitally signed.
2014 This driver is not digitally signed!
2015 This driver has an Authenticode(tm) signature.
3001 Information
3002 Warning
3003 Error
3004 Fatal Error
4206 Device installer error
5320 Unknown driver software package
5330 Update Driver Warning
5331 Installing this device driver is not recommended because Windows cannot verify that it is compatible with your hardware.
5332 Windows Driver Cabinet
5333 (Unable to find any drivers for this device)
5334 (Retrieving a list of all devices)
5335 Windows was unable to find any drivers for this device.\n\nIf you have a disk that contains the updated driver, or you wish to search in another location, click OK.
5336 If the driver is not compatible, your hardware will not work correctly and your computer might become unstable or stop working completely.
5337 Do you want to continue installing this driver?
5340 Select the device driver you want to install for this hardware.
5342 Version: %0d.%0d.%0d.%0d
5343 Yes
5344 No
5345 Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly
5346 recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
5347 Continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly
5348 recommends that you stop this installation now and contact the software vendor for software that has passed Windows Logo testing.
5349 Unknown Publisher
5350 Unknown Publisher Certificate Issuer
5400 File not found or not valid format.
5401 The Trust Provider is unknown or not configured properly.
5402 The object to be verified is unknown to the Trust Provider.
5403 Authenticode signature not found.
5404 The signature does not match the content of the signed message.
5405 Content does not match the signature.
5406 Signature does not contain a valid signer.
5407 Signature does not contain a valid signing certificate.
5408 Signature does not contain a valid counter signing certificate.
5409 A certificate (signing or issuer) has expired.
5410 Certificate signature could not be verified using issuer's certificate.
5411 Unable to create certificate chain from the signing certificate to a root.
5412 The root certificate has not been enabled as a trusted root.
5413 The test root has not been enabled as a trusted root.
5414 Signing certificate's starting or ending time is outside one of its issuer's starting or ending time.
5415 A purpose specified in a certificate (signing or issuer) makes it invalid for Authenticode.
5416 A basic constraint of a certificate in the signature failed for Authenticode.
5417 Certificate does not contain or does not meet the Authenticode financial extension.
5418 The signature contains a time stamp. However, the time stamp could not be verified.
5419 Signing certificate or issuing certificate has been revoked.
5420 An error occurred while accessing online revocation server.
5421 Signature is not trusted by Authenticode with the current policy settings.
5422 The extension in a certificate means the certificate can not be used for Authenticode.
5423 The root certificate has not been enabled for the requested use.
5424 The installed INF file does not contain digital signature information.
5425 Error in ASN encoding (MSOSS error code: 0x%1)
