home *** CD-ROM | disk | FTP | other *** search
- ***********************************************************************
-
- WINDOWS NT DRIVER SETUP INFORMATION
- for
- Trident 93xx/9440/9470/96xx Users
-
-
- ***********************************************************************
- Windows NT Device Drivers Version 1.01 Feb 7, 1996
- ***********************************************************************
-
- Contents
-
- 1.0 Introduction
- 2.0 Supported Resolutions
- 3.0 Installation Notes for Windows NT Version 3.5
-
- *****************************
-
- 1.0 Introduction
-
- This Accelerate Driver runs on the following products:
-
- Trident 93xx/9440/9470/96xx, VESA or PCI local bus adapter
-
- The Graphics Device Drivers supplied here are for the Microsoft
- Windows NT operating system version 3.5.
-
- *****************************
-
- 2.0 Supported Resolutions.
-
- 256 colors 65000 colors 16.7 million
- Resolutions 8 bpp 16 bpp 24/32 bpp
-
- 640 x 480 1/2/4MB 1/2/4MB 1/2/4MB
- 800 x 600 1/2/4MB 1/2/4MB 2/4MB
- 1024 x 768 1/2/4MB 1/2/4MB 4MB
- 1280 x 1024 2/4MB 4MB N/A
- 1600 x 1200 4MB(1) N/A(2) N/A
-
- 1/2/4MB - Supported on 1, 2 or 4 Megabyte Trident products
- N/A - Not Supported
- (1) - 1600x1200x256 is supported with 2MB without acceleration.
- (2) - 1600x1200x64k is supported with 4MB without acceleration.
-
- NOTE: Trident 9440/9470 and 9320 do not accelerate 16 million colors modes,
- neither do they support 1600x1200 mode at any color depth.
-
- ****************************
-
- 3.0 Installation Notes for Windows NT
-
- This driver package containing:
-
- - TGIUL.SYS (Trident linear addressing video miniport driver)
- - TGIUL35.DLL (Trident 256/64K/16M video display driver)
- - FRAMEBUF.DLL (Microsoft dumb frame buffer display driver)
- - VGA.DLL (Microsoft VGA 16 colors video display driver)
- - OEMSETUP.INF (setup files used by Windows NT Setup program)
- - README This README file for Windows NT Version 3.5
-
- Windows NT drivers are included on Disk #2 of this package. They are
- located in the \NT35 sub-directory.
-
- Procedure:
-
- 1. Run the Windows NT display Setup program located in the Control Panel, Main
- group.
-
- 2. Select "Change Display Type..." button from the Display Settings options.
-
- 3. Select "Change..." button from the Display Type options.
-
- 4. Select "Other..." button from the Select Device options.
-
- 5. Windows NT will prompt you for the correct path. Enter A:\NT35 if disk 2
- is loaded in drive A:.
-
- 6. Choose "Trident 93xx/9440/9470/96xx Linear Accelerated" from the
- list of drivers.
-
- 7. Restart Windows NT. Windows NT will start up with 640x480x256 mode
- using the Trident drivers.
-
- 8. Choose desired resulotion, color depth and refresh rate from the
- Display Setting applet, and restart Windows NT.
-