home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 April (Special)
/
Chip-Special_1997-04_cd.bin
/
spea
/
mirage
/
ntm32311
/
ntm32311.exe
/
rar
/
README.ENG
< prev
next >
Wrap
Text File
|
1996-03-06
|
5KB
|
108 lines
╔════════════════════════════════════════════════════════════════════╗
║ ║
║ SPEA WindowsNT Driver BigWinNT Version 3.11 ║
║ SPEA V7SETNT Version 1.4 ║
║ ║
║ for ║
║ ║
║ V7-MIRAGE ISA/VL ║
║ V7-MIRAGE P-32 VL/PCI ║
║ V7-MIRAGE P-64 VL/PCI ║
║ V7-MERCURY ISA/VL/PCI ║
║ V7-MERCURY Lite PCI ║
║ V7-MERCURY P-64 VL/PCI ║
║ V7-MERCURY PRO ISA/VL ║
║ ║
║ SPEA Software AG Release 0396 ║
╚════════════════════════════════════════════════════════════════════╝
Contents of that readme file:
A) What's new?
B) Properties of the Drivers
C) Installation informations
D) V7SETNT Notes/Known restrictions
E) Problems ?
A) What's new?
==============
This driver Version accords to the requirements of NT 3.5
and is fully compatible to the 'Display Setting' module of NT 3.5.
Additionally resolutions over 256 colours are supported.
The following changes to the last version are made:
- now SPEA modes are also supported
B) Properties of the Drivers
============================
Board maximal resolution with
256 colors 64k colors 16M colors
V7-MIRAGE 1024* 768 800* 600 ---
V7-MIRAGE P-32 1152* 864 800* 600 ---
V7-MIRAGE P-64 1MB 1152* 864 800* 600 ---
V7-MIRAGE P-64 2MB 1280*1028 1024* 768 800*600
V7-MERCURY Lite 1152* 870 800* 600 ---
V7-MERCURY 1280*1024 1024* 768 640*480 (800*600)
V7-MERCURY P-64 1280*1024 1024* 768 640*480
V7-MERCURY PRO 1280*1024 1280*1024 1024*768
C) Installation informations
============================
Installation via SPEA V7SETNT program:
--------------------------------------
1. Be sure that the standard VGA driver is running on
your WindowsNT system.
2. Start WindowsNT and login as "Administrator".
3. Change to program managers menu File-Run and enter:
a) if installing from disk:
A:\V7SETNT
b) if installing from CD:
X:\START
("X" must be replaced by your CD ROM drive letter).
4. Now follow the program V7SETNT analog to the description in your
documentation of the program V7SETUP. Select the resolution that you
desire. Please use also the on-line help of the V7SETNT program to get
information how to configure your system.
ATTENTION: You may damage your monitor, if you select a refresh rate which
is to high for your monitor. Please consider the abilities of
your monitor when selecting a driver and its refresh rate.
D) SPEA BigWinNT/V7SETNT: Known Restrictions, Limitations
=========================================================
1. This driver is only running with Windows NT 3.5.
2. The new driver is ONLY for V7-MIRAGE P-64 boards with BIOS
version greater 5.xx! For boards with older BIOS version use the last
version of the driver!
3. The "Test" button in V7SETNT is not available.
4. Connect a mouse to your computer. V7SETNT is not a keyboard only program.
WindowsNT 3.1 does not run stable if you have installed a mouse driver
but have not connected a mouse to your computer.
E) Problems ?
=============
If problems occur with the graphics card V7-MIRAGE VL (dependent on the
motherboard) please exchange the file BIGNTS3.SYS in the directory
\WINNT35\SYSTEM\DRIVERS with the file BIGNTS3.SYS in the directory
\SPEA\INSTALL\NT\FIX on the CD.
╔═════════════════════════════════════════════════════════════╗
║ End of README - Press [Esc] ║
╚═════════════════════════════════════════════════════════════╝