home *** CD-ROM | disk | FTP | other *** search
- ╔════════════════════════════════════════════════════════════════════╗
- ║ ║
- ║ SPEA WindowsNT Driver BigWinNT Version 3.02 ║
- ║ SPEA V7SETNT Version 1.2 ║
- ║ ║
- ║ for ║
- ║ ║
- ║ V7-MIRAGE ISA/VL ║
- ║ V7-MIRAGE P-32 VL/PCI ║
- ║ V7-MIRAGE P-64 VL/PCI ║
- ║ V7-MERCURY ISA/VL/PCI ║
- ║ V7-MERCURY Lite PCI ║
- ║ V7-MERCURY P-64 VL/PCI ║
- ║ V7-MERCURY PRO ISA/VL ║
- ║ ║
- ║ SPEA Software AG Release 0295.3 ║
- ╚════════════════════════════════════════════════════════════════════╝
-
-
- Contents of that readme file:
-
- A) What's new?
- B) Properties of the Drivers
- C) Installation informations
- D) V7SetNT Notes/Known restrictions
-
- A) What's new?
- ==============
- This driver Version has been adjusted to the requirements of NT 3.5
- and is fully compatible to the 'Display Setting' module of NT 3.5.
- Additionally resolutions over 256 colours are supported.
- The following bugs of the last version have been fixed:
- - pixel problems with the animated cursor
- - problems with the 'Disk Administrator'
-
- B) Properties of the Drivers
- ============================
- Board maximal resolution with
- 256 colors 64k colors 16M colors
-
- V7-MIRAGE 1024* 768 800* 600 ---
- V7-MIRAGE P-32 1152* 864 800* 600 ---
- V7-MIRAGE P-64 1MB 1152* 864 800* 600 ---
- V7-MIRAGE P-64 2MB 1280*1028 1024* 768 800*600
- V7-MERCURY Lite 1152* 870 800* 600 ---
- V7-MERCURY 1280*1024 1024* 768 640*480 (800*600)
- V7-MERCURY P-64 1280*1024 1024* 768 640*480
- V7-MERCURY PRO 1280*1024 1280*1024 1024*768
-
-
- C) Installation informations
- ============================
- Installation via SPEA V7SETNT program (installation or update):
- ---------------------------------------------------------------
- 1. Be sure that the standard VGA or and older BigNT driver is running on
- your WindowsNT system.
-
- 2. Start WindowsNT and login as "Administrator".
-
- 3. Change to program managers menu File-Run and enter:
-
- A:\V7SETNT
-
- if your floppy drive with the SPEA/V7 install diskette is in drive a:
-
- 4. Now follow the program V7SETNT analog to the description in your
- documentation of the program V7SETUP. Select the resolution that you
- desire. Please use also the on-line help of the V7SETNT program to get
- information how to configure your system.
-
- ATTENTION: You may damage your monitor, if you select a refresh rate which
- is to high for your monitor. Please consider the abilities of
- your monitor when selecting a driver and its refresh rate.
-
-
- D) SPEA BigWinNT/V7SETNT: Known Restrictions, Limitations
- =========================================================
- 1. This driver is only running with Windows NT 3.5.
-
- 2. The "Test" button in V7SETNT is not available.
-
- 3. Connect a mouse to your computer. V7SetNT is not a keyboard only program.
- WindowsNT 3.1 does not run stable if you have installed a mouse driver
- but have not connected a mouse to your computer.
-
- 4. In this version the V7-MIRAGE P-64 and V7-MIRAGE P-32 can run
- resolutions only with a refresh rate up to 75 Hz.
-
- ╔═════════════════════════════════════════════════════════════╗
- ║ End of README - Press [Esc] ║
- ╚═════════════════════════════════════════════════════════════╝
-
- PK 02/10/95