home *** CD-ROM | disk | FTP | other *** search
- Panasonic / MKE device driver information:
- Copyright (c) Matsushita Kotobuki Electronics Industries 1989-1995
-
-
- *****************************************************
- Matsushita Kotobuki Elec. AT-BUS
- Proprietary Interface CD-ROM drive series
- CR-521/522/523 & CR-562/563
- *****************************************************
-
-
- Files on this Disc:
-
- README.DOC This text file for DOS and OS/2
-
- [ Required files for DOS installation]
-
- INSTALL.EXE Executable file for Installation for DOS
- CDMKE.SYS Device driver file (Version 4.11) for DOS and Windows 3.1
- INSTALL.DAT Setup file for customized executable file
-
-
- [Required files for OS/2 installation]
-
- INSTOS2.EXE Executable file for Installation for OS/2
- INSTOS2.DAT Setup file for customized executable file
- MKECR56x.ADD Device driver for OS/2 (Version 2.11)
- MKECR56x.DDP Setup file for device driver for OS/2
-
-
-
-
- *****************************************************
- Installation procedure for DOS and OS/2
- Date: 3/3/1995
- Written by : MKE/Panasonic.
- *****************************************************
-
-
- *****************************************************
- (A) DOS Installation procedure:
- ( also supported for Windows 3.1)
- *****************************************************
- 1. Supported CD-ROM drive:
- <Proprietary CD-ROM>
- CR-562/563 (double speed, tray loading type)
-
- 2. Installer file name:
- INSTALL.EXE (Version 1.00, common file for installation)
- INSTALL.DAT (installation's data file for proprietary CD-ROM)
-
- 3. Description for execution:
- If you are setting up CR-56X (proprietary CD-ROM), please type following from the DOS prompt:
-
- A: or B: INSTALL [return]
-
-
-
-
-
-
- ********************************************************
- (B) OS/2 2.1; 2.11 and OS/2 Warp installation procedure:
- ********************************************************
-
- 1. Supported CD-ROM drive:
- <Proprietary CD-ROM>
- CR-562/563 (double speed, tray loading type)
-
-
- 2. Installer file name:
- INSTOS2.EXE (Version 2.00, common file for installation)
- INSTOS2.DAT (installation's data file for proprietary CD-ROM)
-
- 3. Description for execution:
- If you are setting up CR-56X (proprietary CD-ROM), please type following:
- A: or B: INSTOS2 [return]
-
-
-
-
-
- *****************************************************
- (c) DOS device driver support:
- *****************************************************
-
- 1. Supported CD-ROM drive series:
- CR-562/563 (double speed, tray loading type)
- CR-521/522/523 (single speed , Caddy type)
-
- 2. Device Driver name:
- CDMKE.SYS (Version 4.11)
-
- 3. Driver description: The device driver must be installed in the Config.sys file.
-
- Example: DEVICE=CDMKE.SYS /D:MSCD001 /SBP:220 or /P:300
-
- [/D:xxxxxxx] ---> Device name option
- [/SBP:nnn] ---> I/F board address option(Sound Blaster)
- *[/P:nnn] ---> I/F board address option(Other)
-
- a) If Sound Blaster I/F board is used;
- Config.sys must be as follows:
-
- DEVICE=CDMKE.SYS /D:MSCD001 /SBP:nnn
-
- where nnn=220, 240, 260 or 280 port address.
- (Default is 220)
-
- for Sound Blaster Pro(8 bit) port address nnn=220 or 240
- for Sound Blaster 16(16 bit) nnn=220, 240, 260 or 280
-
-
- b) If MKE original I/F board or other board is used;
- Config.sys must be as follows:
-
- DEVICE=CDMKE.SYS /D:MSCD001 /P:nnn
-
- where nnn=I/O base port address of interface board.
- nnn=300,310,320,340,350,360,370,380,390,
- 3A0,3B0,3C0,3D0,3E0,3F0.
- For Panasonic original I/F board, the default address is 300.
-
- *[/Q] ---> Non stop option
- Non stop(no message <A>bort, <R>etry) in initializing driver.
- example: DEVICE=CDMKE.SYS /D:MSCD001 /Q
-
- * : You can omit this option.
-
-
-
- *******************************************************
- (D) OS/2 2.1, 2.11 and OS/2 Warp device driver support:
- *******************************************************
-
- 1. Supported CD-ROM drives
- CR-562/563
- CR-521/522/523
-
- 2. Driver name:
- MKECR56X.ADD (Version 2.11)
-
- 3. Driver description:
- *[/P:nnn] ---> I/F board address option(Other)
-
- a) if Sound Blaster board is used;
- Config.sys must be as follows:
-
- BASEDEV=MKECR56X.ADD /P:nnn
-
- nnn=220, 240, 260 or 280(Default is address auto-scan)
- Sound Blaster Pro(8 bit) 220 or 240
- Sound Blaster 16(16 bit) 220, 240, 260 or 280
-
- b) if MKE original I/F board or other board is used;
- Config.sys must be as follows:
-
- BASEDEV=MKECR56X.ADD /P:260 for I/O address 260
-
- nnn=300, 310, 320 or 330(Default is address auto-scan)
-
- * : You can omit this option.
-
-
-
-
-
-
-
-
-
-
-
- Trademarks and Copyrights:
- OS/2 is a trademark of International Business Machines Corporation.
- Sound Blaster is a trademark of Creative Labs, Inc.
- Windows 3.1 is a trademark of Microsoft Corporation.