You must be logged in as an administrator when installing this program.
The directory name cannot include spaces or any of the following characters after the colon:
The directory name cannot include any of the following characters after the colon:
The group name cannot include any of the following characters:
< &Back
&Browse...
Cancel
&Finish
&Install
&Next >
N&o to All
Yes to &All
Setup Needs the Next Disk
Click Finish to exit Setup.
Click Next to continue, or Cancel to exit Setup.
Click Next to continue, or Cancel to exit Setup.
Compact installation
%1 KB
%1 MB
Current selection requires at least [mb] MB of disk space.
The system indicates that the following shared file is no longer in use by any programs. Would you like for Uninstall to remove this shared file?
If any programs are still using this file and it is removed, those programs may not function properly. If you are unsure, choose No. Leaving the file on your system will not cause any harm.
Remove Shared File?
Confirm
Are you sure you want to completely remove %1 and all of its components?
Custom installation
Uninstall %1
The directory:
does not exist. Would you like the directory to be created?
Directory Does Not Exist
folder
directory
The directory:
already exists. Would you like to install to that directory anyway?
Directory Exists
The program requires at least [mb] MB of disk space.
Setup requires at least %1 KB of free space to install, but the selected drive only has %2 KB available.
Do you want to continue anyway?
Not Enough Disk Space
Click Retry to try again, Ignore to proceed anyway, or Abort to cancel installation.
An error occurred while trying to change the attributes of the existing file:
An error occurred while trying to copy a file:
Setup was unable to create the directory "%1"
An error occurred while trying to create a file in the destination directory:
DDE: Command was not successful
DDE: Error during "execute" transaction (code: %1)
DDE: Error during "request" transaction (code: %1)
Unable to execute file:
%1 failed; code %2
%1 failed
%1 failed; code %2.
Error creating INI entry in file "%1".
Internal error %1
An error occurred while trying to open the README file.
An error occurred while trying to read the existing file:
An error occurred while trying to read the source file:
Error creating registry key:
%1\%2
Unable to register the DLL/OCX: %1
DllRegisterServer export not found
Unable to register the type library: %1
Error opening registry key:
%1\%2
Error writing to registry key:
%1\%2
An error occurred while trying to rename a file in the destination directory:
An error occurred while trying to replace the existing file:
Setup was unable to restart the computer. Please do this manually.
RestartReplace failed:
Thunk failed; code %1.
Error
Unable to create a file in the directory "%1" because it contains too many files
The existing file is newer than the one Setup is trying to install. It is recommended that you keep the existing file.
Do you want to keep the existing file?
The existing file is marked as read-only.
Click Retry to remove the read-only attribute and try again, Ignore to skip this file, or Abort to cancel installation.
Setup is not complete. If you quit now, the program will not be installed.
You may run the Setup program again at another time to complete the installation.
Exit Setup?
Exit Setup
wlick Retry to try again, Ignore to skip this file (not recommended), or Abort to cancel installation.
Click Retry to try again, Ignore to proceed anyway (not recommended), or Abort to cancel installation.
The file already exists.
Would you like Setup to overwrite it?
The file "%1" could not be located in "%2". Please insert the correct disk or select another %3.
Setup has finished installing [name] on your computer. The application may be launched by selecting the installed icons.
Setup has finished installing [name] on your computer.
To complete the installation of [name], Setup must restart your computer. Would you like to restart now?
To complete the installation of [name], Setup must restart your computer.
Would you like to restart now?
Full installation
Setup will add the program's icons to the following %1 group.
The password you entered is not correct. Please try again.
When you are ready to continue with Setup, click Next.
Please read the following important information before continuing.
When you are ready to continue with Setup, click Next.
Please read the following important information before continuing.
Information
Please wait while Setup is installing [name] on your computer.
The drive you selected does not exist. Please select another.
You must enter a full path with drive letter; for example:
C:\APP
Error %2: %3
Unable to create a temporary file. Setup aborted
Unable to execute file in the temporary directory. Setup aborted
Please read the following important information before continuing.
Please read the following License Agreement. Use the scroll bar or press the Page Down key to view the rest of the agreement.
Do you accept all the terms of the preceding License Agreement? If you choose No, Setup will close. To install [name], you must accept this agreement.
You must enter a group name.
&Don't create any icons
&Don't create a %1 group
&No, I will restart the computer later
This program will not run on %1.
Setup has detected that the following components are already installed on your computer:
Deselecting these components will not uninstall them.
Would you like to continue anyway?
Components Exist
This installation can only be uninstalled by a user with administrative privileges.
This program must be run on %1.
&Password:
This installation is password protected. Please provide the password.
Passwords are case-sensitive.
This installation is password protected.
Please provide the password. Passwords are case-sensitive.
&Path:
Start Menu
Program Manager
Setup is now ready to begin installing [name] on your computer.
Click Install to continue with the installation, or click Back if you want to review or change any settings.
Click Install to continue with the installation.
Selected Components:
Destination directory:
Program group:
Additional tasks:
Setup Type:
Run %1
View %1
Select the components you want to install, clear the components you do not want to install:
Select Directory
Please specify the location of the next disk.
Please insert Disk %1 and click OK.
If the files on this disk can be found in a %2 other than the one displayed below, enter the correct path or click Browse.
Select the %1 you would like Setup to install [name] to:
Select the additional tasks you would like Setup to perform while installing [name]:
Setup was not completed.
Please correct the problem and run Setup again.
Setup has detected that %1 is currently running.
Please close all instances of it now, then click OK to continue, or Cancel to exit.
Setup
The setup files are corrupted. Please obtain a new copy of the program.
The setup files are corrupted, or are incompatible with this version of Setup. Please correct the problem or obtain a new copy of the program.
The file %1 is missing from the installation directory. Please correct the problem or obtain a new copy of the program.
This will install %1. Do you wish to continue?
Setup - %1
File name:
Location:
Yes, I would like to view the README file
The source file "%1" does not exist
The source file is corrupted
Creating directories...
Creat
ing program icons...
Creating INI entries...
Creating registry entries...
Extracting files...
Registering files...
Saving uninstall information...
Uninstalling %1...
Setup cannot install to a UNC pathname. If you are trying to install to a network, you will need to map a network drive.
%1 Uninstall
Uninstall
"%1" file is corrupted. Cannot uninstall
%1 was successfully removed from your computer.
%1 uninstall complete.
Some elements could not be removed. These can be removed manually.
Uninstall has detected that %1 is currently running.
Please close all instances of it now, then click OK to continue, or Cancel to exit.
File "%1" does not exist. Cannot uninstall.
Please wait while %1 is removed from your computer.
An unknown entry (%1) was encountered in the uninstall log
The uninstall log file "%1" is in a format not recognized by this version of the uninstaller. Cannot uninstall
Welcome to the [name] setup program. This will install [name/ver] on your computer.
It is strongly recommended that you close all other applications you have running before continuing. This will help prevent any conflicts during the installation process.
Welcome to the [name] setup program.
This will install [name/ver] on your computer.
It is strongly recommended that you close all other applications you have running before continuing. This will help prevent any conflicts during the installation process.
This program cannot be installed on %1 version %2 or later.
This program requires %1 version %2 or later.
Setup Completed
Information
Information
Setup Status
License Agreement
Password
Ready to Install
Select Destination Directory
Select Components
Select Program Group
Select Additional Tasks
Uninstall Status
Welcome
&Yes, restart the computer now
Inno Setup Setup Data (1.3.25) with ISX (1.3.25)
CryptoExpert 2003 Professional
CryptoExpert 2003 Professional
CryptoExpert 2003 Professional0
Copyright
2002-1999 SecureAction Research, Ltd
2.00.01
{pf}\CryptoExpert 2003 Pro
CryptoExpert 2003 Professional
Uninstall CryptoExpert 2003 Pro
install
CryptoExpert 2003 Professional for Windows XP/2000/NT
Version 2.86
November 16, 2003
Copyright (C) 2003-1999 SecureAction Research, LLC. All
Rights Reserved.
Program description
-------------------
CryptoExpert uses an on-the-fly encryption system to encrypt and decrypt data. Data is stored in the encrypted form, but when it is requested by any application, it gets decrypted on-the-fly. Conversely, unencrypted data to be stored is encrypted instantaneously and then stored. The CryptoExpert system mounts a volume file to create a "virtual drive" that appears to applications and users like any other physical drive. Any data that the user attempts to write to this drive is intercepted by CryptoExpert, encrypted, and written to the volume file. Attempts to read from this volume are also intercepted, and the relevant data is read by CryptoExpert from the volume file, decrypted, and presented to the application trying to read the data.
Dismounting the CryptoExpert "virtual drive" ensures that data cannot be read from or written to it. All data is stored encrypted within the "container". As far as windows is concerned, there is a 'new' disk that has suddenly appeared. When the program exists or the volume is unmounted, the file system stays encrypted and there is absolutely no way anyone can recover/get the data without the pass phrase.
Benefits of CryptoExpert:
------------------------
* Using 4 powerful encryption algorithms to encrypt
your data: BLOWFISH, CAST, DES, 3DES which are
world industrial standards of encryption
* Transparent encrypting and decrypting data
* Mounting encrypted files containers as 'virtual'
hard drives and mapping it as hard drive letters
like G:, F:, K: and etc
* Built in file shredder - i.e. wiping the contents
of the original pre-encrypted file beyond recovery
to make sure that not even a trace remains after
shredding. (matching and exceeding the
specifications of the U.S. Department of Defence)
to stop hardware recovery tools.
* Ability to send files via email (MAPI)
* Ability to access to encrypted contents from any your
favourite program like: Windows Explorer, Windows
Commander or even MS-DOS shell.
* User-Friendly easy-to-understand interface
designed to hide the complexities of encryption
technology from the end user.
What's New
----------
* See History.txt
Installation
-------------
* Copy the distribution kit into the temporary directory
and run setup.exe
* Note: If you've got CryptoExpert 2003 Pro not from its web
page, but from the other source (magazine CD or some
software library), please visit its home page at
www.cryptoexpert.com - you'll probably find
the later version.
System Requirements
-------------------
* Pentium 166 based IBM PC compatible computer (or higher)
* 32 Mb of free memory
* About 1900 Kb free disk space
* Microsoft Windows XP/NT 4.0/2000
* A mouse
Order
-----
* CryptoExpert is a trial software. It's fully
functional during trial period, but some restrictions
on file size are used. See Order.txt for
order details.
License
-------
* See License.txt
Technical support
-----------------
* If you've got a problem, please contact our support
team at support@secureaction.com. Please inform us
about the following:
- program version (from "About" dialog)
- Windows XP/2000/NT version (including service packs and
other fixes installed), US
x or international, OEM or
not
- computer information: CPU type, installed memory
- description of your problem (as much information as
possible to retrieve the problem)
CryptoExpert PRO Team
www.cryptoexpert.com - a business division of SecureAction Research, Ltd
www.secureaction.com
CryptoExpert: versions history
------------------------------
[+] new feature
[*] improvement/modification or bug fix
Version 2.86 (November 16, 2003) - Major update
[+] Added "Favourite containers" dialog
[+] Added support for XP visual themes
Version 2.85 (October 7, 2003) - Major update
[+] Added ability to create container's shortcut on desktop to
mount/unmount containers.
Version 2.80 (August 14, 2003) - Major update
[+] All icons were changed
[+] Added icons to options pages
[+] Added File Properties dialog.
Version 2.75 (June 10, 2003) - Major update
[+] CExpert Tray icon is restored on Windows system bar crash
[*] AutoDismount time is saved on pressing OK button in Options
dialog
[*] OK buttons are pressed on ENTER key in mount & dismount dialogs
Version 2.70 (May 10, 2003) - Major update
[+] Added function to dismount all containers after
some period of not using the computer automatically
[*] Program is not closed on pressing ESCAPE or ENTER keys
Version 2.60 (April 6, 2003) - Major update
[+] Added virtual keyboard to type passwords safely
(to mount container window)
[*] CExpert runs at windows start up correctly
without error message "no drivers found"
Version 2.56 (March 8, 2003) - Major update
[+] Added command line interface to
mount & unmount containers
[+] Added ability to manage containers
to be mounted at windows start up.
Menu / Containers / Automount containers
[+] Added new dialog "Container properties"
[+] Added context menu command "Properties"
[+] Added ability to set container be mounted
at windows start up from properties
window
[+] Added ability to remember used password
for container. It gives ability to mount
container by single mouse click without
entering password
[+] Added ability to specify fixed drive
letter to be used for mounting container
(as well as on mounting it at windows
start up to make sure the drive letter
is always the same)
[*] No error messages shown during installation
if device drivers already present in a
system
[*] All drives/folders/files are not removed from
internal browser window on dismounting
container if the container is selected
Version 2.54 (January 23, 2003) - Minor update
[+] Added Options->Files->Flat buttons
Version 2.53 (January 8, 2002) - Major update
[+] Added Options->Files->Expore drive after
mounting
[+] Now Refresh function works fine. All
information about new files in folders
are updated correctly
[+] Added 'Exit' command into tray menu.
[+] Added Warning Dialog on exit CE.
Version 2.52 (December 4, 2002) - Minor update
[+] Stable release
Version 2.51 (November 19, 2002) - Minor update
[+] Added ability to repair CE's drivers by
clicking "Restore driver settings"
shortcut in CE's program folder
Version 2.50 (November 6, 2002) - Major update
[+] Added ability to set keyboard Hot Key to
dismount all virtual drives
Version 2.01.01 (October 6, 2002) - Major update
[+] Added 'AutoMount at windows startup'
option.
[*] Now it is possible to enter password > 3
chars in registered version
Version 2.00.01 (September 23, 2002) - New release
(.txt)