457 Insert directories with content\nDirectory tool
458 Insert a field\nField tool
500 Select a paper stock\nPaper Stock
501 Zoom to view all objects\nZoom All
502 Increase the apparent size\nZoom In
503 Decrease the apparent size\nZoom Out
504 Zoom into the selected region\nZoom Region
550 Select the color of the current brush\nBrush Color
551 Select the color of the current pen\nPen Color
600 Show or hide the Tools toolbar\nToggle Tools toolbar
601 Show or hide the Properties toolbar\nToggle Properties toolbar
602 Show or hide the Text toolbar\nToggle Text toolbar
603 Show or hide the View toolbar\nToggle View toolbar
604 Display or hide large icons.
650 Insert a Title field\nTitle
651 Insert an Artist field\nArtist
652 Insert a field containing the type of the disk (Audio, Data...)\nDisk Type
653 Insert a field containing the release year\nRelease Year
654 Insert a field containing the subtitle of a disk\nSubtitle
655 Insert a field containing the artist of a disk\nDisk's Artist
656 Insert a field containing the total playing time of a disk's Audio part\nPlaying Time
657 Insert a field containing the number of audio tracks on a disk\nNumber of Tracks
658 Insert a field containing the date the document was last saved\nLast Save Date
659 Insert a field containing the date the document was last printed\nLast Print Date
660 Insert a field containing the overall size of all files and directories on a disk's data track\nTotal File Size
661 Insert a field containing a user-defined text\nCustom Text
700 Show or hide the grid\nToggle Grid
701 When enabled, objects snap to the grid\nToggle Snap to Grid
702 Open the Grid Setup dialog\nGrid Setup
703 Switch the clipping mode on or off\nToggle Clipping
708 Open the Guidelines Setup dialog\nGuidelines Setup
709 Show or hide guidelines\nToggle Guidelines
710 When enabled, objects snap to guidelines\nToggle Snap to Guidelines
711 Show or hide the ruler\nToggle Ruler
712 Display a crosshair instead of the mouse cursor\nToggle Crosshair
750 Select the font name\nFont name
751 Select the font size\nFont size
752 Toogle bold style\nBold
753 Toogle italic style\nItalic
754 Toogle underline style\nUnderline
755 Left align text\nLeft
756 Center text\nCenter
757 Right align text\nRight
759 Set the text color\nText color
800 Place the selected objects at the top of the object stack\nArrange to top
801 Place the selected objects at the bottom of the object stack\nArrange to bottom
802 Move the selected objects one position up in the object stack\nMove up one position
803 Move the selected objects one position down in the object stack\nMove down one position
850 Select Objects\nSelection tool
900
901 XXXXXXXXXXXXXXXXXXXXXXX
950 Add a new object of this type
951 Delete the selected object
952 Delete all children of the selected object
953 Select one or more files to add to the file system
954 Select a folder to add to the file system
955 Open the Import dialog\nImport data
1000 Apply the 'Equalize' effect to an image\nEqualize
1001 Apply the 'Emboss' effect to an image\nEmboss
1002 Apply the 'Erode' effect to an image\nErode
1003 Apply the 'Flip horizontally' effect to an image\nFlip horizontally
1004 Apply the 'Flip vertically' effect to an image\nFlip vertically
1005 Apply the 'Negate' effect to an image\nNegate
1006 Apply the 'Outline' effect to an image\nOutline
1007 Apply the 'Concave' effect to an image\nConcave
1008 Apply the 'Convex' effect to an image\nConvex
1009 Apply the 'Pinch' effect to an image\nPinch
1010 Apply the 'Sharpen' effect to an image\nSharpen
1011 Apply the 'Soften' effect to an image\nSoften
1012 Apply the 'Mosaic' effect to an image\nMosaic
1013 Apply the 'Contrast' effect to an image\nContrast Adjustment
1014 Apply the 'Gamma' effect to an image\nGamma Adjustment
1015 Apply the 'Swirl' effect to an image\nSwirl
1016 Apply the 'Brightness' effect to an image\nBrightness Adjustment
1017 Apply the 'Solarize' effect to an image\nSolarize
1018 Apply the 'Posterize' effect to an image\nPosterize
1019 Apply the 'Rotate' effect to an image\nRotate
1050 Copy the element to the current position\nCopy
1051 Move the element to the current position\nMove
1052 Cancel the current operation\nCancel
1100 Booklet item\nBooklet
1101 Inlay item\nInlay
1102 Maxi Inlay item\nMaxi Inlay
1103 Label item\nLabel
1104 Front Inlay item (Mini CD)\nFront Inlay
1105 Rear Inlay item (Mini CD)\nRear Inlay
1106 Label item (Mini CD)\nLabel
1107 Biz Card item\nBiz Card
1108 Rectangle Biz Card item\nRectangle Biz Card
10000 Delete the selected object\nDelete
10001 Open the Background Properties dialog\nBackground Properties
10002 Open the Properties dialog\nProperties
10003 Save the current document as a document template\nSave as template
10004 Edit the default settings for the application
10006 Select all objects in the current view\nSelect All
10007 Create a copy of the currently selected object\nDuplicate
10008 Group the selected objects together\nGroup
10009 Ungroup the objects from the currently selected group\nUngroup
10010 Open the Default Properties dialog\nDefault Properties
10011 When enabled, the text is read-only\nToggle Read-only
10012 Convert the text to curves\nConvert To Curves
10013 Enable or disable bending of the text\nToggle Bend
10014 Open the Align dialog\nAlign
10015 Copy the selected object's properties and apply them to other objects\nCopy Properties
10016 Open the Document Data dialog\nDocument Data
10017 Acquire an image from a TWAIN source\nAcquire image
10018 Select the TWAIN source\nSelect Source
10019 Open the Geometry dialog\nGeometry
10020 Open the Paper Stocks dialog\nEdit Paper Stocks
10021 Edit the selected object's data\nObject Data
20002 This document has no tracklist data!
20003 Left
20004 Right
20005 Center
20006 Justified
20007 All Supported Files|*.jpg;*.jif;*.pbm;*.pcx;*.png;*.ppm;*.tga;*.tif;*.bmp;*.dib;*.wmf;*.wpg|JPEG File Interchange Format (*.jpg, *.jif)|*.jpg;*.jif|Portable Bitmap (*.pbm)|*.pbm|PC Paintbrush File Format (*.pcx)|*.pcx|Portable Network Graphics (*.png)|*.png|Portable Pixmap(*.ppm)|*.ppm|Truevision Targa (*.tga)|*.tga|Tagged Image File Format (*.tif)|*.tif|Windows Bitmap (*.bmp)|*.bmp|Windows DIB (*.dib)|*.dib|Windows Metafile (*.wmf)|*.wmf|Word Perfect Graphic Bit \nmap (*.wpg)|*.wpg|All Files|*.*||
20009 2.1
20010 Text
20012 Version 2.1
20013 Copyright 2000 Ahead Software GmbH
20014 All rights reserved.
20015
20016 Read only
20017 Open the Background Properties dialog
20018 Properties
20019 Background Properties
20020 Default Properties
20021 Standard
20022 View
20023 Tools
20026 Read in an import file
20027 Export to a file
20031 Name
20032 Left Margin
20033 Top Margin
20034 Border
20035 New Page
20036 Do you want to set your selection as the default property?
20039 Please confirm to print page %1!d! (Stock: %2).
20040 You entered a duplicate profile name. Do you wish to overwrite the existing profile?
20041 Saving the document as a template will cause the document data to be destroyed. Do you wish to continue?
20042 Do you wish to edit the document template? (If you press No, a new document will be created.)
20043 The disk is not empty. Do you really want to delete it?
20044 You're about to destroy one or more parts of the disk that still contain some data. Do you wish to continue?
20045 All existing artist information will be overwritten. Do you wish to continue?
20046 Artist information for all items on this disk will be overwritten. Do you wish to continue?
20047 Do you want to delete all %1?
20048 Disk %1!ld! is not empty. All existing data on the disk will be overwritten. Do you wish to continue?
20049 Disk %1!ld! is of a different type than the imported file. Do you wish to import the data and change the disk's type?
20050 You have deleted one or more of the disks which currently exist in your document.\nIf you press Yes, the corresponding labels will be destroyed. If you press No, the dialog will be closed, discarding all changes. Press Cancel to continue editing.
20051 Do you want to delete the paper stock?
20052 Error opening %1
20053 Error writing to %1
20054 Cannot convert %1
20055 Error loading image
20056 An error occurred while printing the document.
20057 The system could not find the file specified.
20058 The specified file already exists.
20059 Permission denied.
20060 No space left on device.
20061 Out of memory.
20062 The system could not find the path specified.
20063 Unrecognized file format.
20064 LZW compression not supported.
20065 File corrupt.
20066 Unable to load imaging subsystem. Make sure the program is installed properly.
20067 You selected too many files. Please limit your selection to %1!d! files at a time.
20068 A disk may not contain more than %1!d! audio tracks.
20069 No OEM definition file specified. Aborting program.
20070 Predefined print profiles may not be deleted.
20071 The path '%1' is not valid. Please specify a valid directory location.
20072 Please enter a name for the paper stock.
20073 A paper stock with this name already exists. Please enter a different name.
20074 There was no printer found. Please install a printer first.
20075 Your demo version has expired!
20076 Can't %1: Too much data.
20077 The document has been created with a newer version of this program.\nTo open the document, please update to the latest version.
20078 Cannot write to the following part of the registry:
20079 Please check the permissions.
20080 The registry is maybe corrupt. Please start the program Scanreg to repair the registry.
20100 Tracks
20101 First track:
20102 Directory
20103 First entry:
20104 Last track:
20105 Last entry:
20155 Show or hide the %1 view (use the CTRL key to toggle)\n%1
20156 Regular
20157 Italic
20158 Bold
20159 Bold Italic
20162 millimeters
20163 inches
20164 Modify Objects
20165 mm
20166 "
20167 Unknown
20172 %1!d! Tracks
20173 Playing time: %1
20175 Change property
20176 Delete object
20177 Insert object
20178 Move object
20179 Move point
20180 Change order
20181 Resize object
20182 Change text
20183 Change text
20184 Toggle read-only
20185 Transform object
20186 Guidelines
20187 Horizontal
20188 Vertical
20189 Horizontal position:
20190 Vertical position:
20191 Select the default folder for documents
20192 Select the default folder for user-defined document templates
20193 Select the default folder for import files
20194 Convert to curves
20195 Disk information
20196 Data
20197 Audio
20198 Audio+Data
20201 Document
20202 Disk
20203 File system data
20204 Audio data
20205 File
20206 Track
20207 Document
20208 Disk
20209 File System Data
20210 Audio Data
20211 File Data
20212 Audio Track
20213 Number of tracks: %1!d!
20214 Total playing time: %1
20215 Number of entries: %1!d!
20216 Total size: %1 bytes
20217 tracks
20218 entries
20219 Application preferences
20225 Disk %1!d!: %2
20226 Disk %1!d!
20227 Track %1!02d!: %2
20228 Track %1!02d!
20229 Document: %1
20233 bytes
20234 KB
20235 MB
20236 GB
20238 sec.
20239 min.
20240 h
20248 Name
20249 Path to file
20250 Size
20251 Artist
20252 Title
20253 Playing time
20254 Select the files you want to add to the disk
20260 Artist %1!d!
20261 Track %1!d!
20262 Directory %1!d!
20263 File %1!d!
20264 Extended Info %1!d!
20265 Name %1!d!
20266 Path %1!d!
20267 Disk %1!d!
20268 Artist Disk %1!d!
20269 Artist/Publisher
20270 Directory
20271 File
20300 [empty]
20301 Empty Document
20302 DocTemplates
20303 %1 degrees
20308 Column
20309 Field type
20310 Use
20320 Equalize
20321 Emboss
20322 Erode
20323 Mirror
20324 Flip
20325 Negate
20326 Outline
20327 Concave
20328 Convex
20329 Pinch
20330 Sharpen
20331 Soften
20332 Mosaic
20333 Contrast
20334 Gamma
20335 Swirl
20336 Brightness
20337 Solarize
20338 Posterize
20339 Rotate
20360 Title
20361 Artist
20362 Year
20363 Disk Title
20364 Number of Tracks
20365 Total Playing Time
20366 Total Size of Files
20367 Last Save Date
20368 Last Print Date
20369 File number
20370 Extended info
20371 File size
20372 File title
20373 Track number
20374 Custom text
20375 All artists
20376 File path
20377 File type
20378 Disk Artist
20379 Disk Type
20380 Playing Time
20381 <Artist>
20382 <Year>
20383 <Disk #%1!d! Title>
20384 <Tracks>
20385 <Playtime>
20386 <Datasize>
20387 <Savedate>
20388 <Printdate>
20389 <???>
20390 <Disk #%1!d! Artist>
20391 <Disk #%1!d! Type>
20392 <Title>
20393 <Custom Text>
20397 %1!d!
20398 %1!d!
20400 %1 Documents (%2)
20401 %1.Document
20402 %1 Document
20403 New Document %1!d!
20410 %1 Templates (%2)
20411 %1.Template
20412 %1 Template
20413 New Template %1!d!
20420 Import Files (*.cdc)
20423 Paper Stock Files (*.dat)
20442 Bend
20443 &Effects
20500 Standard
20501 Multi Box
20502 Maxi
20503 Biz Card
20504 Slim Pack
20505 Mini CD
20506 Rectangle Biz Card
20507 DVD Case
20510 Booklet
20511 Booklet %1
20512 Inlay
20513 Inlay %1
20514 Label
20515 (Front)
20516 (Rear)
20517 Maxi Inlay
20518 Disk %1!d!
20519 Biz Card
20520 Front Inlay (Mini CD)
20521 Rear Inlay (Mini CD)
20522 Label (Mini CD)
20523 Inlay (Front)
20524 Inlay (Rear)
20525 Rectangle Biz Card
20526 DVD Case Insert
20527 Insert
20528 DVD Booklet
20550 Audio 1
20551 Audio 2
20552 Audio 3
20600 Data 1
20700 Normal Paper
20701 Stock
20702 Paper Stocks
20703 Predefined Stocks
20704 User-defined Stocks
20705 Number of paper stocks: %1!ld!
20706 (%1!ld! predefined, %2!ld! user-defined)
20707 Please select a paper stocks file
20708 Please specify a location for the paper stocks file
20709 %1 #
20750 Print
20751 General
20752 Elements
20753 Print Preview: Page %d of %d
20754 Printable Items
20755 %1 (%2!ld!x on %3)
20756 Page %1!ld! of %2!ld!: %3
20770 Please select the Cover Designer document into which you want to import the data, or click on the background of the main window to insert the data into a new document. The data will be imported into the first free disk of the imported file's type in the document. If you click on a disk label, the data will be imported into the corresponding disk.
20771 When you apply this operation, the text will be converted into a graphical element. This means that after the conversion, you will neither be able to edit or bend the text nor change its properties. Do you really want to convert the text?
20772 Import Data
20773 Convert To Curves
20800 [s <sec>]
20801 [m:ss]
20802 [mm:ss]
20803 [m:ss <min>]
20804 [mm:ss <min>]
20805 [h:mm:ss]
20806 [hh:mm:ss]
20807 [h:m:ss <h>]
20808 [hh:mm:ss <h>]
20820 [n]
20821 [n <bytes>]
20822 [n <kB>]
20823 [n <MB>]
20840 [Normal]
20841 [Uppercase]
20842 [Lowercase]
20843 [Reverse]
20860 [n]
20861 [nn]
20862 [Roman Uppercase]
20863 [Roman Lowercase]
20864 Template
21000 Calibration sheet for %s
21001 * Divide the sheet into two halves by folding it horizontally at its middle\n* Divide it again by folding it vertically at its middle\n* Unfold the paper and read off the values where the two creases intersect the axes\n* Enter these values into the program's calibration dialog\n* IMPORTANT: The calibration sheet's size must be exactly the size of the paper type specified in the printer's properties
21020 Document Data
21021 Document Data...
21118 Could not start print job.
21119 Page %u
21120 Horizontal [%s]
21121 Vertical [%s]
21122 copy to clipboard
21123 CoverEdCtrl Control
21124 Modify Object
21125 Enter a location for the output file for page %1!d!
21126 Save changes to %1?
28416 The help file cannot be opened: %1!s!
28417 No Help topic is associated with this item.
28418 The license you are currently using does not allow you to start this application
28419 Your demo version has expired!
28420 This version of the application cannot be run in this language. Please visit our website at www.nero.com to purchase an unlimited serial number.
40000 Turns horizontal alignment of objects on or off.
40001 When enabled, the selected objects' left edges are vertically aligned.
40002 When enabled, the selected objects' center points are vertically aligned.
40003 When enabled, the selected objects' right edges are vertically aligned.
40004 Turns vertical alignment of objects on or off.
40005 When enabled, the selected objects' top edges are horizontally aligned.
40006 When enabled, the selected objects' centers are horizontally aligned.
40007 When enabled, the selected objects' bottom edges are horizontally aligned.
40008 Here you can specify the reference for object alignment.
40009 When enabled, all objects will line up with the last selected object.
40010 When enabled, all objects will line up with the page boundaries.
40100 Here you can modify several extended text properties.
40101 When checked, the text is read-only, which means that it may not be modified until you deactivate the read-only style.
40102 Enable if you want to bend the text.
40103 Lets you modify the contents of the text. The text must not be empty or only be a white space.
40200 Here you can select and load an image from various sources.
40201 Opens a file dialog, where you can select and load an image file.
40202 Imports an image from a TWAIN device.
40203 Here you can choose which stretching mode to use when displaying the image.
40204 Enables you to draw the image so that it exactly fits into the surrounding frame, even if the proportions of the image cannot be maintained.
40205 Fits the image inside the frame, while maintaining the image's original proportions. When this option is used, the image may not fill the frame completely.
40206 Enable to display the image so that it completely fills the surrounding frame, always maintaining the image's original proportions. When this option is used, the image may not be completely visible.
40207 Displays the name of the image.
40208 Displays the image effect menu, from which you can select an effect to apply to the current image.
40209 Removes the image selection, so that no image will be displayed in the surrounding frame.
40210 Here you can see what your selected image will look like when you apply the current settings.
40300 When this button is checked, the brush is invisible.
40301 Lets you choose how to fill the interior of an object. If you select the solid rectangle, the foreground color will be used to paint the whole object. If you select a hatch style, the foreground and background colors will be used.
40302 Displays the current foreground color for the brush. Press the button to be able to change the foreground color.
40303 Displays the current background color for the brush. Press the button to be able to change the background color.
40400 Here you can specify which sort of text field you want to use.
40401 Here you can modify the field settings.
40402 Lets you choose the side to which the field text is aligned.
40403 For fields that display information about items on a disk, here you can specify the index of the referenced disk.
40404 For date fields, here you can choose the format of the date string.
40405 For fields displaying a time value, here you can choose the format of the time string.
40406 For fields displaying a file size, here you can choose the format of the size string.
40407 Lets you enter text that will precede the field's content.
40408 Lets you enter text that will be appended to the field's content.
40409 When checked, the field's text will always be of the same size.\n\nThis feature is not available for bent text fields.
40410 For fields that display custom texts, lets you enter the field's custom text.
40500 When this button is checked, the pen is invisible.
40501 Used to specify the width of the pen.
40502 Displays the current pen color.
40600 Lets you choose the text font.
40601 Lets you choose the font style.
40602 Lets you specify the size of the selected font.
40603 When checked, the selected font is displayed with strikeout.
40604 When checked, the selected font is underlined.
40605 Here you can see how the text will look, if you stick with the current settings.
40700 Here you can modify the settings that define which part of the document data is displayed in the track list.
40701 Here you can select the index of the disk to be referenced by the track list.
40702 Here you can specify the index of the first visible audio track.
40703 Here you can specify the index of the last visible audio track.
40704 Here you can modify formatting options for the track list.
40705 Lets you choose one of the predefined styles which can be used to display track lists. A style can be modified to a great extent by changing the field options. When you switch styles, your current field settings will be applied to the newly selected style.
40706 Lets you specify the distance set between columns.
40707 When checked, the contents of the track list will be sized to fit into the printable area of the view.
40708 When checked, a sample window shows a preview of the track list as it will look when you apply the current settings.
40709 Here you can modify the settings for the fields used in the selected style.
40710 Lets you select one of the fields available for the currently selected style. The check box next to each field name indicates whether the field is currently visible or invisible.
40711 Lets you choose the side to which the selected field's text is aligned.
40712 Opens a dialog in which you can choose the selected field's color.
40713 Open the font dialog, where you can select the font to use for the selected field.
40714 Lets you choose how to format the selected field. You can choose one of the predefined field-specific formats.
40715 Lets you specify the size of the selected field's font relative to the font size of the other fields.
40716 Here you can enter text that will precede each occurrence of the selected field in the track list.
40717 Here you can enter text that will be appended to each occurrence of the selected field in the track list.
40718 Lets you choose the side to which the track list's content is aligned.
40800 Here you can modify the settings that define which part of the document data is displayed in the directory list.
40801 Here you can select the index of the disk to be referenced by the directory list.
40802 Here you can select the index of the first visible file or directory item.
40803 Here you can select the index of the last visible file or directory item.
40804 Here you can modify formatting options for the directory list.
40805 Lets you choose one of the predefined styles which can be used to display directory lists. A style can be modified to a great extent by changing the field options. When you switch styles, your current field settings will be applied to the newly selected style.
40806 Lets you specify the distance to set between columns.
40807 When checked, the contents of the directory list will be sized to fit into the printable area of the view.
40808 When checked, a sample window shows a preview of the directory list as it will look when you apply the current settings.
40809 Here you can modify the settings for the fields used in the selected style.
40810 Lets you select one of the fields available for the currently selected style. The check box next to each field name indicates whether the field is currently visible or invisible.
40811 Lets you choose the side to which the selected field's text is aligned.
40812 Opens a dialog in which you can choose the selected field's color.
40813 Opens the font dialog, in which you can select the font to use for the selected field.
40814 Lets you choose how to format the selected field. You can choose one of the predefined field-specific formats.
40815 Lets you specify the size of the selected field's font relative to the font size of the other fields.
40816 Here you can enter text that will precede each occurrence of the selected field in the directory list.
40817 Here you can enter text that will be appended to each occurrence of the selected field in the directory list.
40818 Lets you choose the side with which the directory list's content is aligned.
40900 Here you can select the type of case you want to design a cover for.
40901 Here you can select what type of contents the album is going to hold.\nThe Data type represents a disk which contains a data track only.\nThe Audio type represents a disk which contains only audio tracks.\nThe Audio+Data type represents a Mixed-Mode disk, which is a combination of a data track and multiple audio tracks.
40902 Here you can select a template for your new document. The list shows only those templates that match the selected case and album type. If you don't want to use a template, select the item showing an empty document.
40903 Shows a preview of the selected template. Use the spin buttons to switch through the different cover elements of the template.
40905 Lets you specify the number of disks the album will initially contain. You can still add or remove disks later when editing the cover.
40906 When checked, a new template will be created instead of a new document.
41000 Here you can specify an object's size. Changing the size of an object might affect its rotation angle, and vice versa.
41001 Specifies the width of an object.
41002 Specifies the height of an object.
41003 Here you can specify an object's position on the workspace.
41004 Specifies the horizontal position of an object relative to the upper left corner of the surrounding frame rectangle.
41005 Specifies the vertical position of an object relative to the upper left corner of the surrounding frame rectangle.
41006 Here you can specify the rotation angle of an object. Changing the size of an object might affect its rotation angle, and vice versa.
41007 Specifies the angle to rotate the object about.
41100 Here you can define a grid for your workspace. The grid is used to adjust the position of objects.
41101 Specifies the horizontal grid spacing.
41102 Specifies the vertical grid spacing.
41103 Shows or hides the grid in your workspace.
41104 Enables or disables automatic adjustment of an object's position to the grid.
41200 Displays information about the ongoing operation.
41201 If you close the dialog with this check box enabled, the dialog will never appear again.
41300 Displays a hierarchical view of the album information contained in your document. When you select an item in the tree view, e.g. a disk or an audio track, the item's information will be displayed in the group box to the right. This information is not available for document templates.
41301 Shows information specific to the item which is currently selected in the tree view.
41400 Displays the number of audio tracks on this disk. The data track, if one exists, is not counted.
41401 Displays the overall playing time of all audio tracks on this disk. The time used up by the data track is not counted.
41402 Adds a new empty audio track to the track list. Tracks can be rearranged by dragging them to another position in the tree structure, even into the audio section of another disk.
41403 Removes all audio tracks from the current disk.
41500 Specifies the title of the currently selected audio track.
41501 Specifies the artist of the currently selected audio track.
41502 Specifies the playing time of the currently selected audio track.
41503 Allows you to enter additional information belonging to the currently selected audio track.
41504 Removes the currently selected audio track from the track list.
41600 Specifies the subtitle of the currently selected disk.
41601 Specifies the type of information stored on the disk. Changing the disk type may cause parts of the information to be lost.
41602 Specifies the artist or publisher of the disk.
41603 Applies the specified artist or publisher to all subitems which store artist information, e.g. audio tracks.
41604 Deletes a disk and all its subitems from your document. As a document must contain at least one disk, this function is not available when the current disk is the only one in the document.
41605 Opens a dialog where you can select an import file to open. The current disk will be replaced with the information stored in the import file.
41700 Displays the overall number of files and directories on this disk's file system track.
41701 Displays the overall size of all files and directories on this disk's file system track.
41702 Opens a dialog where you can select a file system folder to add to the disk's file system track. The folder will appear as one item in the list, i.e. the contents of the folder will be inaccessible.
41703 Removes all items from the file system track.
41704 Opens a dialog where you can select a number of files to add to the disk's file system track. Items can be rearranged by dragging them to another position in the tree view, even into the file system track of another disk.
41800 Here you can enter a name for the currently selected file or directory.
41801 Displays the original file system location of the file or directory.
41802 Displays the size of the currently selected file or directory. The size of directories includes the size of all contained files and subdirectories.
41803 Deletes the currently selected file or directory from the disk's file system track.
41900 Specifies the title of the album to be produced.
41901 Specifies the artist or publisher of the album.
41902 Applies the specified artist or publisher to all subitems which store this type of information, e.g. disks or audio tracks.
41903 Specifies the year of the album's release or production.
41904 Adds a new empty disk to the album.
42000 Here you can customize directory settings.
42001 Specifies the default location for loading and saving cover designer documents.
42002 Specifies the default location for cover designer templates. Template files in this folder will be displayed in the File New dialog.
42003 Specifies the default location for import files.
42100 Here you can customize the program's language and units of measurement.
42101 Lets you select the language you want to use in the program.
42102 Lets you select the unit of measurement to be used for length specifications.
42103 Here you can select the default print profile for the application.
42104 Selects the printing profile used to layout objects on the output page. The profile will be selected automatically when you open the Print dialog.
42200 Here you can customize the program's undo behavior.
42201 When enabled, limits the maximum number of operations that can be revoked by limiting memory usage.
42202 When enabled, limits the maximum number of operations that can be revoked to the specified value.
42203 When enabled, there is no limit for undo operations.
42300 Displays the unmodified image.
42301 Displays the image after applying the effect filter.
42302 Lets you customize the effect filter. The range for customization values depends on the type of effect.
42400 Lets you modify the contents of the text.
42401 Here you can specify the font settings of the text currently selected in the rich edit control. If there is no text selected, your settings will be applied when you enter text at the current caret position.
42402 When checked, the contents of the text box will be sized to fit into the printable area of the view.
42403 When checked, the text box is read-only, which means that its contents may not be modified until you deactivate the read-only style.
42500 Please wait until the TWAIN operation has been finished.
42600 Specifies the position of the horizontal guideline to manipulate.
42601 Adds a horizontal guideline to the workspace using the specified position.
42602 Moves the selected horizontal guideline to the specified position.
42603 Removes the selected horizontal guideline from the workspace.
42604 Deletes all horizontal guidelines from the workspace.
42605 Shows a list of all currently existing horizontal guidelines.
42700 Specifies the position of the vertical guideline to manipulate.
42701 Adds a vertical guideline to the workspace using the specified position.
42702 Moves the selected vertical guideline to the specified position.
42703 Removes the selected vertical guideline from the workspace.
42704 Deletes all vertical guidelines from the workspace.
42705 Shows a list of all currently existing vertical guidelines.
42800 Here you can modify printing options for your cover.
42801 Displays the name of the printer currently selected for printing the cover.
42802 Opens a dialog box for selecting and configuring a printer.
42803 Here you can modify several printing options which affect the whole print job.
42804 When checked, you have to confirm the printing of each page explicitly. This allows you to insert a new sheet of paper before the next page is printed.
42805 Here you can specify on which paper stocks crop marks should be added to the cover elements' edges.
42806 Instructs the program to add crop marks to the edges of each cover element on all paper stocks.
42807 Instructs the program to add crop marks to the edges of each cover element on normal paper only.
42808 Instructs the program never to add crop marks to the edges of cover elements.
42809 Here you can specify on which paper stocks borders should be drawn around the cover elements.
42810 Instructs the program to draw borders around each cover element on all paper stocks.
42811 Instructs the program to draw borders around each cover element on normal paper only.
42812 Instructs the program never to draw borders around cover elements.
42813 Enters print preview mode using the current dialog settings. In the preview, you can see the pages on your screen as they will appear on the paper.
42814 Here you can modify various printing options.
42815 Here you can change the settings to be used for the effect called 'Bleeding', which means increasing the space on the paper to be used for each cover element by a certain amount, so that marginal shifts in the paper position don't cause the marks on predefined paper stocks to be missed.\n\nThe Bleeding settings you specify here will be lost when you close the application. You can change Bleeding permanently in the Printing page of the Preferences dialog.
42816 When checked, the documents are not sent to the printer directly, but saved to PRN files, which can then be printed later.
42900 Displays a hierarchical view of all currently open Cover Designer documents and their cover elements. You can configure printing options for each document and all of its subdocuments separately. When you select an item in the tree view, the corresponding information is displayed in the Options group box below the tree. Modify the values in the group box to change the printing options for the selected tree item. Setting a value for a document will cause the value to be applied to \nall of its cover elements.
42901 Here you can modify the printing options for the cover element which is currently selected in the tree view.
42902 Lets you specify how many times the cover element which is currently selected in the tree view should be printed. Changing this value for a document causes the new value to be applied to all of its cover elements.
42903 Specifies the type of paper to use for the cover element currently selected in the tree view. When checked, the element is expected to be printed on normal paper. When unchecked, the element is expected to be printed on the type of paper stock that was specified for it in the Cover Designer.
42904 Shows a preview of what would be printed if you started the print job with the current settings. Use the spin buttons to switch through the pages.\n\nClick on an item to enable or disable it for the print job. When an item is disabled, no cover element will be printed at the item's position. This enables you to use paper sheets for more than one print job.
42905 Displays information about the page currently visible in the sample.
43000 In this dialog, you can select and open a document or template file.
43001 Shows a preview of the selected document or template. Use the spin buttons to switch through the different cover elements.
43100 Select a tab to get to the corresponding dialog page.
43200 Here you can specify the position of the object's center.
43201 Specifies the object's horizontal center point.
43202 Specifies the object's vertical center point.
43203 Here you can specify the object's rotation characteristics.
43204 Specifies the object's starting angle.
43205 Specifies the angle to be included by the object.
43600 Removes the currently selected disk label from the paper stock.
43601 Lets you specify the radius of the label, and thus the label's size. All labels of a paper stock must have the same size.
43602 Lets you specify the radius of the non-printable inner area of the label. All labels of a paper stock must have the same inner radius.
43603 Here you can specify the label's offset from the upper left corner of the paper stock.
43604 Lets you specify the horizontal position of the label.
43605 Lets you specify the vertical position of the label.
43700 Displays a hierarchical view of all currently available paper stocks. When you select a paper stock or one of its printable items in the tree view, the item's information will be displayed in the group box to the right.
43701 Shows information specific to the item which is currently selected in the tree view.
43702 Displays a preview of the currently selected paper stock. When defining or modifying your own paper stocks, use the preview to verify the result of your modifications.
43800 Displays the total number of currently available paper stocks.
43801 Shows details about the currently available paper stocks.
43802 Adds a new user-defined paper stock to the list.
43803 Lets you save all user-defined paper stocks to a file. This file can later be loaded via the Import function.
43804 Lets you load paper stocks from a file that was previously created via the Export function. The paper stocks contained in the file will be added as new user-defined paper stocks.
43900 Lets you specify a name for the paper stock. Each paper stock must have a unique name. Only names of user-defined paper stocks can be modified.
43901 Here you can specify the size of the paper stock.
43902 Lets you specify the paper stock's width.
43903 Lets you specify the paper stock's height.
43904 Push to add a cover item to the paper stock. You can select the item type from a popup menu. This function is available only for user-defined paper stocks.
43905 Removes the currently selected paper stock from the list. This function is available only for user-defined paper stocks.
43906 Here you can specify how paper stocks of this type must be fed into the printer.
43907 Specifies that the paper must be fed in Portrait format.
43908 Specifies that the paper must be fed in Landscape format.
44000 Here you can modify various settings for the different paper stocks and cover element types.
44001 Lets you select the type of cover element for which you want to modify the settings.
44002 Specifies the default paper stock to be used for cover elements of the currently selected type.
44003 When enabled, cover elements of the currently selected type are printed by default. When disabled, you have to select them manually in the Elements page of the Print dialog.
44100 Here you can change the settings to be used for the effect called 'Bleeding', which means increasing the space on the paper to be used for each cover element by a certain amount, so that marginal shifts in the paper position don't cause the marks on predefined paper stocks to be missed.
44101 Specifies the amount of space to be added around cover elements.
44102 Here you can calibrate the printer you're currently using.
44103 Here you can preview the horizontal and vertical offsets to be used as printer alignment.
44104 Specifies the horizontal offset to be used for printer alignment.
44105 Specifies the vertical offset to be used for printer alignment.
44106 Push to print a sheet of paper that helps you to adjust your printer's alignment.
44200 On certain events, the Cover Designer can display informational messages describing what is about to happen. Here you can specify which of these informational messages you want to see.
44201 The Cover Designer can read in ('import') disk and album information directly from a file. Other programs can use this feature to pass such information to the Cover Designer. As there may be several possible destinations for the data, you will be asked to choose a destination.\n\nWhen importing a data file, the Cover Designer can display a detailed message describing how to proceed. Here you can specify if a message should appear each time a data file is about to be imported.
44202 The command 'Convert To Curves' transforms an artistic text into a graphical element. Here you can specify if a warning message should appear each time a text is converted into curves.
44203 Here you can customize the application's visible appearance.
44204 When checked, you can select the font you want to be used for dialog boxes. When unchecked, the standard system font is used.
44205 Lets you select the font to be used for dialog boxes.
44300 Removes the currently selected %1 item from the paper stock.
44301 Here you can specify the %1 item's offset from the upper left corner of the paper stock.
44302 Lets you specify the horizontal position of the %1 item.
44303 Lets you specify the vertical position of the %1 item.
44304 Here you can specify the size of the %1 item. All %1 items of a paper stock must have the same size.
44305 Lets you specify the %1 item's width.
44306 Lets you specify the %1 item's height.
44307 Lets you specify the %1 item's spine width.
44308 Lets you specify the width of the Maxi Inlay's back side.
44309 Lets you specify the radius of the %1, and thus the %1 size. All %1 items of a paper stock must have the same size.
44310 Lets you specify the radius of the non-printable inner area of the %1. All %1 items of a paper stock must have the same inner radius.
44311 Lets you specify the bounding rectangle of the %1 item. The bounding rectangle can be used to cut the %1 item to the section of a circle. All %1 items of a paper stock must have the same bounding rectangle.
44312 Lets you specify the width of the %1 item's bounding rectangle. The bounding rectangle can be used to cut the %1 item to the section of a circle.
44313 Lets you specify the height of the %1 item's bounding rectangle. The bounding rectangle can be used to cut the %1 item to the section of a circle.
44314 Lets you specify the dimensions of the %1 item's rounded corners. All %1 items of a paper stock must have equally rounded corners.
44315 Lets you specify the horizontal extent of the %1 item's rounded corners.
44316 Lets you specify the vertical extent of the %1 item's rounded corners.
44400 Removes the currently selected Mini Front Inlay item from the paper stock.
44401 Here you can specify the size of the Mini Front Inlay item. All Mini Front Inlay items of a paper stock must have the same size.
44402 Lets you specify the Mini Front Inlay item's width.
44403 Lets you specify the Mini Front Inlay item's height.
44404 Lets you specify the Mini Front Inlay item's spine width.
44405 Here you can specify the Mini Front Inlay item's offset from the upper left corner of the paper stock.
44406 Lets you specify the horizontal position of the Mini Front Inlay item.
44407 Lets you specify the vertical position of the Mini Front Inlay item.
44500 Removes the currently selected Mini Rear Inlay item from the paper stock.
44501 Here you can specify the size of the Mini Rear Inlay item. All Mini Rear Inlay items of a paper stock must have the same size.
44502 Lets you specify the Mini Rear Inlay item's width.
44503 Lets you specify the Mini Rear Inlay item's height.
44504 Lets you specify the Mini Rear Inlay item's spine width.
44505 Lets you specify the width of the Mini Rear Inlay's back side.
44506 Here you can specify the Mini Rear Inlay item's offset from the upper left corner of the paper stock.
44507 Lets you specify the horizontal position of the Mini Rear Inlay item.
44508 Lets you specify the vertical position of the Mini Rear Inlay item.
44700 Here you can choose a color by defining either its Hue, Saturation, and Brightness, or otherwise its Red, Green, and Blue values. Use the circle and the adjacent bar to define Hue, Saturation and Brightness.
44701 Lets you specify the color's Hue value.
44702 Lets you specify the color's Saturation value.
44703 Lets you specify the color's Brightness value.
44704 Lets you specify the color's Red value.
44705 Lets you specify the color's Green value.
44706 Lets you specify the color's Blue value.
44707 Modify the Brightness value of the color by adjusting the marker's position.
44708 Modify the color's Hue and Saturation values by adjusting the marker's angle and distance from the circle's center.\n\nAt the edge of the circle, the color always has full Saturation. The angle determines the Hue value.
44800 Displays the current color.
49000 The title bar contains the standard Windows buttons. It also displays the name of the Cover Designer application. If there's a document active, its name is displayed along with the application name. Double-click the title bar to maximize the program window.
49001 The application menu provides access to all commands and operations the program supports.
49002 You can dock the application's toolbars anywhere in the toolbar area. Dragging a toolbar into the main workspace makes the toolbar float, which means that it acts as a normal window.
49003 The status bar displays information about commands and operations, the current position of the mouse cursor and the state of various keys.
49004 This is the main workspace of the application. It contains all currently open documents and templates.
49005 The title bar contains the standard Windows buttons. It also displays the name of the document or template.
49006 The ruler helps you when setting size and position of objects in a cover element. The element's dimensions are displayed in the current linear measure. The ruler also shows the current mouse position. You can create guidelines by dragging out of the ruler into your document workspace, and delete them by dragging them from the workspace into the ruler.
49007 This is the workspace for the currently active cover element. The cross-hatched area outside the cover element will not be printed.
49008 You can make a cover element visible by clicking on the corresponding tab. Clicking a tab with the CTRL key pressed toggles the element.
49009 When the used workspace for a cover element is too large to fit entirely into its view, scroll bars appear along the right and bottom edges of the view.
49010 The splitter bars separate the visible cover elements. Drag the bars to adjust the size of the elements' views.
49900 Closes the dialog and saves all changes.
49901 Closes the dialog, discarding all changes.
49902 Displays help for this dialog.
49999 No help text available for this item.
57344 Cover Designer
57345 For Help, press F1
57346 Select an object on which to get Help
57600 Create a new document\nNew Document
57601 Open an existing document\nOpen Document
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the active document\nPrint
57609 Display full pages\nPrint Preview
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and place it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57648 Open another window for the active document\nNew Window
57649 Arrange icons at the bottom of the window\nArrange Icons
57650 Arrange windows so they overlap\nCascade Windows
57651 Arrange windows as non-overlapping tiles\nTile Windows
57652 Arrange windows as non-overlapping tiles\nTile Windows
57653 Split the active window into panes\nSplit
57664 Displays program information, version number, and copyright.\nAbout
57665 Quit the application; prompts to save documents\nExit
57666 Opens Help\nHelp Topics
57667 List Help topics\nHelp Topics
57668 Display instructions about how to use help\nHelp
57669 Display help for clicked-on buttons, menus, and windows\nHelp
57670 Display help for current task or command\nHelp
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the Standard toolbar\nToggle Standard toolbar
59393 Show or hide the status bar\nToggle StatusBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
