3 Unable to load all registered Anvil Studio Accessory pages.
4 Accessory '%1' does not contain a valid license.%cIf you want to use this accessory, please re-run its setup program.
5 Before you can install the new version, you will need to obtain a new FREE license by email from support@AnvilStudio.com.
6 Unable to initialize Anvil Studio Accessory '%1'.
7 Anvil Studio has not been properly setup on your computer.%cPlease run the Anvil Studio setup program.
8 Invalid name for new synthesizer: %1.
9 Unable to enable synthesizer: %1.
10 Cannot remove a synthesizer while any track in current song is assigned to a synthesizer.
11 This synthesizer cannot listen to this channel.
12 Error: synthesizer "%1" is assigned to play track %2 on MIDI channel %3.%cIt needs exclusive access to that channel.
13 Click here to indicate what synthesizer patch, or instrument, should be used to play this track.
14 Your computer can't record at the desired Audio Quality.%cPlease change the Audio Quality field and try again.
15 Anvil Studio Internal Error: %1.
16 You must first set this track's Synthesizer.
17 This field can't be changed for Audio tracks.
18 This synthesizer can't listen to this channel.%cChange the Channel or Synthesizer property first.
20 Too create multiple audio tracks, you need the%cAnvil Studio Multi-Audio accessory.%cSee the Catalog item in the Help menu for details.
21 Enter part of the instrument name, or%ccomments you have entered for it:
22 This button copies the selected patch to the selected slot in the active bank.%cYou must first click on the slot in the active bank where you want the patch to be copied.
23 Unable to create new patches or banks for this syntesizer%cTo do this, you need a Anvil Studio Patch Controller accessory.%cSee the Catalog item in the Help menu for details..%cDo you want to see that page now?
24 This audio file was recorded with %1 quality%cIt is not compatible with this song's current Audio Quality setting of %2.
25 You must first assign a synthesizer to this track.
26 This will cause all notes on this track to be erased.%cAre you sure that you want to erase this track?
27 This synthesizer doesn't have a Drum patch loaded in its active bank.%cTry editing the synthesizer's properties and change to another bank that has drums.
28 This track already contains MIDI events for multiple channels.%cTo be used as a rhythm track, it can only have one channel.
29 Now, your song has more than one track.%cMany pages, like the Compose page, only affect the active track.%cThe active track is the one whose name is highlighted on the Mixer page.%cTo make another track active, click on that track's name on the Mixer page.
30 If you do not have a MIDI Keyboard connected to your computer,%cselect the View / Synthesizers menu, and then set the MIDI Input port to <none>.
31 You could also try again after selecting the View / Mixer menu%cand disable all Audio tracks and Sampled Rhythm tracks.
33 Before you can record or play audio, you need you select Audio Ports.%cDo you want to do that now?
34 This system has no audio output device.
35 This system has no audio recording device.
36 You cannot change audio quality while a song with recorded audio is loaded%c%cEither create a new song, or%cselect 'Erase Track Notes' from the Edit menu for each Audio track, or%cselect 'Truncate song' from the File menu,%cand then try again.
37 <br>There are no accessories installed on this computer.<br>See the Catalog item in the Help menu to see how to add accessories to this program.
38 The Audio file for track %1, '%2' was not found.%cThis track will be disabled.
39 Unable to play Track %1%c%2%cTrack is now disabled.
40 To use this page, you must:%c o put a Music CD into the computer's CD-Rom drive,%c o wait for a few seconds for the computer to recognize it.
41 Start time must be less than end time.
42 Invalid time. Value must be between 0 and 1200.
44 Channel must be ----- or a number from 1 to 16.
45 Too create more samples, you need the Anvil Studio Multi-Audio accessory.%cSee the Catalog item in the Help menu for details.%cDo you want to see that page now?
46 Press the OK button to begin recording.
47 Another application is using the computer's CD player.%cYou need to quit that application before you can use this page.
48 Your computer has no Compact Disk player.
49 Unable to load the sampled audio file '%1' that is referenced by this song.%c%2
50 Note: If saved, this file will be converted to a newer format.
51 This track already contains MIDI events for multiple channels.%cYou can only record to tracks that have one channel.
52 This song's Audio Quality property is higher than can be played by your computer.%cAudio tracks will be disabled.
55 You need to select a track first.
56 Your computer does not have the sound device necessary to start the Metronome.
57 Warning: no MIDI sounds will occur until you enable a Midi Out Port.%cTo do so, select the View / Synthesizers menu.
58 Before you can use the Rhythm Tool, you need to enable one or more synthesizers that have Drum patches.
59 Accessory '%1' needs a newer version of Anvil Studio (%2 or later).%cBefore you can use this accessory, you need to install a new version of Anvil Studio.
60 The version of accessory '%1' you are using is not compatible with your new version of Anvil Studio.%cTo use this accessory, you need to download a free upgrade for this accessory.%cSelect Installed Accessories from the View menu to download a setup program for the new accessory.%cPlease email us at Support@AnvilStudio.com if you have any trouble re-installing the accessory.
61 This is to notify you that a new version of accessory '%1' is available for download from Anvil Studio's Web site.%cPlease select the View / Installed Accessories menu and press the 'Download new version' buttons if you would like to download the free setup programs to upgrade your accessories.
62 This song contains no tracks.
63 Error: To set a program for synthesizer "%1"%cit needs to be the only synthesizer listening to this channel.%c"%2"is also listening to MIDI channel %3.
64 Note: Since track %1 uses multiple channels, no program can be set for channel %2.
65 Error: First you need to set one or more tracks to this channel.
66 Make sure MIDI cable connects Synthesizer's MIDI Output Port to computer's MIDI Input Port.
68 Song refers to disabled synthesizer: "%1".%cTo enable it, select the View / Synthesizers menu.%cIf the file is saved, synthesizer settings will be lost.
69 Unable to output to MIDI Port %1.%c%2.
70 You cannot do this while a song is loaded. Do you want to unload the current song?
71 This system has no MIDI Output Devices. It will be unable to play any MIDI music.
72 Before you can do this, you first need to give the song file a name.
73 You need to edit the Rhythm Tool's properties and set its Synthesizer property.
74 Error: Unable to load patch library for synthesizer "%1" from file %2.
75 Unable to play any patches. No channels on this synthesizer are enabled. To enable one, in the MIDI Channel Programs box, set any channel's Program to anything other than <none>.
76 Do you want to save changes to %1
77 Unable to load %1.%cPlease email the song to support@AnvilStudio.com so we can repair the problem.
78 Your computer has no MIDI Output Controller. Do you want to exit?
79 Before you can do this, you need to enable one or more synthesizers by selecting the View / Synthesizers menu.%cDo you want to do that now?
80 Invalid value.
81 Invalid time.
83 You need to disable (uncheck) all synthesizers before you can change MIDI ports.
84 Anvil Studio requires Internet Explorer 3.0 or later, which can be downloaded from www.microsoft.com\ie
85 This track's Audio Quality property is higher than can be played by your computer.
86 Error: MIDI port needs to be attached.
87 This song contains no enabled tracks with Audio.
88 Error: Number of times to play measures must be between 1 and 100.
89 You must first select the synthesizer that you want to play the rhythm track.%cAfter pressing the Ok button, try pressing the Down Arrow key until you see the synthesizer you want.%cThen press the Enter key.
90 The setup program for accessory '%1' appears to have not been run.%cIf you have not already done so, please download it from%c %2%c and then run it.
91 If you have questions, please copy this information and send it to us at%c support@AnvilStudio.com
92 Error: selection is too large to invert.
93 Stack Overflow. Either your program contains a cycle, or it cannot keep up with MIDI Inputs
94 You need to add a Keyboard Tool to your program if you want to process Keyboard events.
95 You need to press the RUN button before this page will do anything.
96 You must press the Stop button if you want to change this program.
97 You tried to connect to a tool that cannot accept input.
99 <br><dd>In addition to downloading the installation program, you also need to<br><dd>request a new <b>free</b> license by email from support@AnvilStudio.com.
100 Audio input device '%1' does not support recording.%cPlease try again after assigning a different device to this track on the Mixer page.
101 Audio output device '%1' does not support features required by Anvil Studio.%cIf you are using a WaveTable MIDI Synthesizer, this is sometimes corrected by adding an empty, enabled Instrument track.
102 First, you need to select the View / Mixer menu.%cThen, click on the track you want to view.
103 You can still view Anvil Studio documentation%cby having your favorite web browser load the file:%c%c %1%c%cPlease visit our web site at www.AnvilStudio.com.
104 This sample was imported from file '%1'.%cDo you want to edit a private copy of that file?
105 Unable to perform this operation because it would result in%ctwo notes of the same pitch being played at the same time on the same track.
106 This may take a few minutes. Please be patient...%cPress OK to begin or CANCEL if you do not want to do this now.
107 This setting is ignored since the track's Pan or Volume has been edited to vary over time.%cYou can edit this track's Pan or Volume data by selecting the View / Controllers menu.
108 This song is currently set to generate Mono audio output.%cDo you want to produce Stereo audio output?%c%cStereo audio consumes twice as much memory as Mono.%cYou can change it back to Mono at any time by unchecking the%cMixer page's 'Stereo Audio Output' check box.
109 The active track is not empty.%cAre you sure you want to replace the contents of track %1 with the imported file?
110 Unable to simultaneously record this many tracks.%cTrack %1 will not be recorded.
111 Your machine does not have enough available memory to record Audio.%cYou could try closing some other applications and then try to record again.
112 Machine isn't fast enough to record this quality.%cPlease report this problem to support@AnvilStudio.com
113 After you have downloaded the programs to install the upgraded accessories,%cplease exit Anvil Studio, run the downloaded programs, and restart Anvil Studio.%cThe new versions of your accessories will be used the next time you start Anvil Studio%cafter having run the downloaded programs.
114 Enter the number of half-steps to%cincrease or decrease each note.%cFor example, 12 shifts notes up one octave.%c-12 shifts notes down one octave.
115 Enter the number of scale degrees to%cincrease or decrease each note.%cFor example, 7 shifts notes up one octave.%c-7 shifts notes down one octave.
116 Error: This song was created with the Multi-Audio accessory, which is no longer installed.%cIf you save this song, some Audio tracks will be lost.
117 Note: If saved, this file will be converted to standard MIDI-1 format,%cwhere tempo events are stored in track 0, but no information will be lost.
118 This song appears to have format errors.%cDo you want to try to repair the song file now?
119 Warning: When you save this song, it is very important to save it to a new file%cand keep the old file as a safe copy, in case this changes the song in some undesirable way.%cThis may modify the currently-loaded song file.%cThis operation can take several minutes.%c%cPress the OK button to fix any errors found in this song.%cPress Cancel to leave this song unchanged.
120 Files saved by Anvil Studio can be edited by other MIDI editing programs, however%cediting song files with another MIDI editor may cause loss of some important information.%cAnvil Studio stores Sequencer-Specific MIDI events to remember things like%clinks to audio files and some staff note properties.%cThese special events are part of the MIDI standard and do not interfere with how%cthe song gets played by other MIDI player programs.%cSome other MIDI editors delete these Sequencer-Specific MIDI events from song files.%cAnvil Studio preserves Sequencer-Specific MIDI events saved by other editors.%c%cIt is always a great idea to create backup copies of your song files,%cbut it is especially important to do so before editing them with another editor.%c%cThis warning will not be displayed again.
121 Making it this loud will introduce distortion into the track.%cDo you want to do it anyway?%c%c(Note that you can get maximum volume with no distortion%cby pressing the Filter button and selecting Normalize.)
123 Accessory '%1' has been installed, but is not yet registered.%cYou need to run the registration program that was emailed to you, e.g.%c%c %2%c%cbefore you can use this accessory.%cPlease contact Willow Software at support@AnvilStudio.com if you need help.
124 Accessory '%1' has an invalid or expired license.%cPlease contact Willow Software at support@AnvilStudio.com for a free license renewal.
125 Clicking here just changes the position of the song.%cTo copy/paste measures from track to track, select the View / Mixer menu.
126 It might be in use by another application - try again after quitting other programs.
127 You could select the View / Synthesizers menu
128 Error: file is marked read-only or currently opened by another application.
129 Your computer's soundcard does not support this feature.
130 This will cause the existing DirectX effects to be removed from your song.%cIs that ok?
131 Loading audio files longer than one minute requires the optional Multi-Audio 1/8 accessory.%cPlease select Catalog from the Help menu for accessory ordering information.
132 The largest audio file Anvil Studio can handle is %1 minutes.%cThis audio file is %2 minutes, which is too large.
133 Windows ran out of memory while trying to load this track's audio file.%cPlease quit other applications, use the Control Panel to increase Windows Virtual Memory settings, and try again.
