3 Are you sure you want to permanently delete the setting "%s"?
4 %s KB
5 Bilinear
6 8-tap anisotropic
7 Please enter a name for this setting.
8 More Direct3D
10 Best image quality
11 High image quality
12 Blend
13 High performance
14 Best performance
15 %s MB
16 PCI
17 AGP
18 %u MHz
21 <Unavailable>
40 Not present
41 Unknown
42 NTSC
43 PAL
44 SECAM
45 HDTV
46 %s%%
47 %s%s░
65 Off
66 Low
67 Medium
68 High
70 Off
71 Low
72 Moderate
73 High
75 Auto-select
76 Always off
77 Always on
78 AGP (PCI mode)
80 Chrontel
81 Chrontel 7000 Family
82 Chrontel 7003
83 Chrontel 7004
84 Chrontel 7005
85 Chrontel 7006
86 Chrontel 7007
87 Chrontel 7008
88 Conexant
89 Conexant Bt868
90 Conexant Bt869
91 Conexant CX25870
92 Conexant CX25871
93 Philips
94 Philips 7100 Family
95 Philips 7102
96 Philips 7103
97 Philips 7108
98 Philips 7109
99 Philips 7108B
100 NVIDIA Internal
124 Chrontel 7009
125 Chrontel 7010
126 NV17 Internal (MV)
127 NV17 Internal
128 Chrontel 7011
129 Chrontel 7012
130 Red
131 Green
132 Blue
133 All channels
135 Use block transfer
136 Use page flip
137 Auto-select
138 &Contrast
140 Philips 7108A
141 Philips 7109A
142 Philips 7104
143 Philips 7105
144 Conexant CX25872
145 Conexant CX25873
146 Conexant CX25874
147 Conexant CX25875
150 Your flat panel display has a maximum resolution of %u x %u.
151 Windows will now switch your desktop to the selected settings. This may take several seconds. If Windows does not reappear correctly, wait 15 seconds and your original settings will be restored.
152 The screen has been reset to its default position.
153 Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best. It is recommended you set your Screen Resolution to %ux%u.
200 (Combination) N/PAL
201 B/PAL
202 D/PAL
203 I/PAL
204 M(Japan)/NTSC
205 M/NTSC
206 M/PAL
207 N/PAL
208 G/PAL
209 H/PAL
210 K1/PAL
211 B,D,G,H,I/PAL
212 [PAL only]
213 SECAM
214 HDTV
300 Country/Region
301 Format
302 Windows will now set your hardware to match the settings you have specified. The screen may blank for several seconds during this process.\n\nTo avoid potential problems with the hardware, do not turn off your computer during this process!
303 Description
304 Filename
305 Version
400 Auto-select
401 Composite Video-Out
402 S-Video-Out
420 Off
421 2
422 3
423 4
424 5
500 Intel x86 Compatible
501 Intel Pentium(r)
502 Intel PentiumPro(r)
503 Intel Celeron(tm) or Xeon(tm)
504 Intel Celeron(tm)-A
505 Intel Pentium(r) II
506 Intel Pentium(r) III
507 Intel Pentium(r) 4
508 Intel Itanium(r)
509 AMD K5
510 AMD K6
511 AMD K6-2
512 AMD K6-3
513 AMD Athlon(tm)
514 AMD Duron(tm)
515 Cyrix MediaGX
516 Cyrix 6x86 Family
517 Cyrix MII Family
518 IDT WinChip C6
519 IDT WinChip 2
520 with MMX(tm)
521 with 3DNow!(tm)
522 with SSE
523 with SSE2
1000 NVIDIA (Unknown)
1001 RIVA TNT
1002 Vanta
1003 TNT2 Model 64
1004 RIVA TNT2
1005 RIVA TNT2 Pro
1006 TNT2 Ultra
1007 GeForce 256
1008 GeForce DDR
1009 Quadro
1010 Aladdin TNT2
1011 GeForce2 MX/MX 400
1012 GeForce2 MX 100/200
1013 Quadro2 MXR/EX
1014 GeForce2 GTS
1015 GeForce2 Ultra
1016 GeForce2 Ti
1017 Quadro2 Pro
1018 GeForce2 Go
1020 GeForce3
1021 GeForce2 MX 100/200
1022 GeForce2 MX 100
1023 GeForce2 MX 200
1024 GeForce2 MX 400
1025 GeForce2 Integrated GPU
1026 Quadro DCC
1027 GeForce3 Ti 200
1028 GeForce3 Ti 500
1029 NV17
1030 NV17-1
1031 NV17-2
1032 NV17-3
1033 GeForce4 440 Go
1034 GeForce4 420 Go
1035 NV17M
1036 GeForce4 420 Go 32M
1037 GeForce4 440 Go 64M
1070 Fixed
1071 Grow Only
1072 Dynamic
1073 NVidia nForce
1074 220D SDRAM
1075 420D SDRAM
1076 220D DDR-RAM
1077 420D DDR-RAM
1078 with Dolby(r) Digital
1079 220
1080 420
1081 SDRAM
1082 DDR
1090 Additional OpenGL Properties
1091 Use shutter glasses
1092 Use vertical interlace monitor
1093 Use nView Clone mode
1094 Use on-board DIN connector
1095 Use on-board DIN connector on DAC 1
1096 Use blue-line-code for StereoGraphics(R) products
1114 The Full Screen Video Mirror feature requires the nView mode to be set to Clone or Extended Desktop.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1115 Full Screen Video Mirror
1116 The Full Screen Video Mirror feature requires the nView mode to be set to Clone.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1117 Custo&m OpenGL Applications Setting:
1118 Application Settings
2000 NVIDIA (Unknown)
2001 RIVA TNT
2002 RIVA TNT2
2003 Vanta
2004 Vanta LT
2005 TNT2 Model 64
2006 RIVA TNT2 Pro
2007 TNT2 Ultra
2008 Aladdin TNT2
2009 GeForce 256
2010 GeForce DDR
2011 Quadro
2012 GeForce2 MX
2013 GeForce2 MX 100
2014 GeForce2 MX 200
2015 GeForce2 MX 100/200
2016 GeForce2 MX 400
2017 GeForce2 MX/MX 400
2018 GeForce2 Go
2019 Quadro2 MXR
2020 Quadro2 EX
2021 Quadro2 MXR/EX
2022 GeForce2 Integrated GPU
2023 GeForce2 GTS
2024 GeForce2 Ultra
2025 GeForce2 Ti
2026 GeForce2 Pro
2027 Quadro2 Pro
2028 Quadro2 Pro
2029 Quadro2 Go
2030 GeForce3
2031 GeForce3 Ti 200
2032 GeForce3 Ti 500
2033 Quadro DCC
2034 NV17
2035 NV17M
2036 GeForce4 440 Go
2037 GeForce4 420 Go
2038 GeForce4 420 Go 32M
2039 GeForce4 440 Go 64M
2040 GeForce4 MX 460
2041 GeForce4 MX 440
2042 GeForce4 MX 420
2043 Quadro4 500/550 XGL
2044 Quadro4 200 NVS
2045 Quadro4 400 NVS
2046 Quadro4 550 XGL
2047 GeForce4 Ti 4600
2048 GeForce4 Ti 4400
2049 GeForce4 Ti 4200
2050 Quadro4 900 XGL
2051 Quadro4 750 XGL
2052 Quadro4 700 XGL
2053 Quadro4 200/400 NVS
2054 Quadro4 500 GoGL
5001 (Empty)
5002 QuickTweak Properties
5003 About
5004 Adjust Display Properties
5005 Custom Direct3D Settings
5006 Custom Color Settings
5007 NVIDIA QuickTweak
5008 Restore Driver Defaults
5009 Restore Hardware Defaults
5010 Unable to start the applet. Please ensure that the software has been properly installed on your system.
5011 QuickTweak
5012 QuickTweak Properties
5013 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start a Direct3D application.
5014 The default Direct3D settings have been restored.
5015 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start an OpenGL application.
5016 The default OpenGL ICD settings have been restored.
5017 Custom OpenGL Settings
5018 Display %u
5019 Unable to find the file NVDESK32.DLL. The Desktop Manager features will be unavailable.
5020 Dynamic link failure in NVDESK32.DLL. The Desktop Manager features will be unavailable.
5021 Program Files
5022 Select an Application
5023 The hot key you have selected is a single key without a CTRL, SHIFT, or ALT key used in combination. Only function keys can be assigned as single-key hot keys.\n\nPlease select a different hot key for this action.
5024 The hot key you have selected is a single key with the SHIFT key as a modifier. You may use a SHIFT+Single-Key combination only if the Single-Key is a function key.\n\nPlease select a different hot key for this action.
5025 The hot key you selected is already in use.\n\nPlease select a different hot key for this action.
5026 Desktop Manager
5028 The Desktop Manager is currently enabled, but the system must be\nrestarted to enable all Desktop Manager functionality.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5029 The Desktop Manager is currently disabled, but it will remain in your\ncomputer's memory until the system is restarted.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5031 The settings "%s" have been successfully applied.
5032 The default color settings have been restored.
5040 Desktop Manager Enabled
5042 Desktop Manager Disabled
5044 Desktop Manager Properties
5050 TV Output
5060 nView Properties
5061 nView Desktops
5062 nView
5063 Enable nView
5064 Disable nView
5065 Open nView control panel
5066 nView Profiles
5070 Rotation Settings
5071 Rotation Enabled
5072 Rotation Disabled
5073 Rotate 0 degree
5074 Rotate 90 degree
5075 Rotate 180 degree
5076 Rotate 270 degree
5090 Wizard Error - There was a problem accessing your registry -
10000 Argentine Republic
10001 Belgium
10002 Denmark
10003 Finland
10004 Germany (Federal Republic of)
10005 Guinea (Republic of)
10006 Hong Kong
10007 India (Republic of)
10008 Indonesia (Republic of)
10009 Italy
10010 Malaysia
10011 Netherlands (Kingdom of the)
10012 Norway
10013 Portugal
10014 Singapore (Republic of)
10015 Spain
10016 Sweden
10017 Switzerland (Confederation of)
10018 China (People's Republic of)
10019 Korea (North)
10020 Denmark
10021 Finland
10022 Germany (Federal Republic of)
10023 Italy
10024 Malaysia
10025 Netherlands (Kingdom of the)
10026 Norway
10027 Portugal
10028 Spain
10029 Sweden
10030 Switzerland (Confederation of)
10031 Belgium
10032 Hong Kong
10033 United Kingdom
10034 Guinea (Republic of)
10035 Japan
10036 Canada
10037 Chile
10038 Colombia (Republic of)
10039 Costa Rica
10040 Ecuador
10041 Haiti (Republic of)
10042 Honduras
10043 Korea (Republic of, South)
10044 Mexico
10045 Panama (Republic of)
10046 Puerto Rico
10047 Taiwan
10048 United States of America
10049 Venezuela (Republic of)
10050 Brazil (Federative Republic of)
10051 Paraguay (Republic of)
10052 Uruguay (Eastern Republic of)
10053 France
12000 Enable fog table emulation
12001 Adjust Z-buffer depth to rendering depth if unequal
12002 Enable alternate depth buffering technique
12003 Display logo when running Direct3D applications
12004 Use DirectX 5 compatibility mode
12005 Force trilinear filtering
12050 Please note that full scene antialiasing and the use of a unified depth buffer or window flipping are mutually exclusive.\n\nIf you wish to enable the unified depth buffer or window flipping, full scene antialiasing will be automatically disabled in the driver.
13000 Enable buffer region extension
13001 Allow the dual planes extension to use local video memory
13002 Use fast linear-mipmap-linear filtering
13003 Enable anisotropic filtering
13004 Enable alternate depth buffering technique
13005 Disable support for enhanced CPU instruction sets
16000 Your hardware settings cannot be applied until you have tested them.\n\nSet the desired clock frequencies and then choose the 'Test New Settings' button to ensure that the hardware can support your selections.
16001 Your graphics hardware will now be tested at the new clock settings for several seconds.\n\nIf your computer stops responding during this time, turn your computer off and then back on.\nYour previous settings will be automatically restored.
16002 You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
16004 %u x %u pixels
16005 %u Hz
16007 Analog Display
16008 Digital Display
16009 TV
16010 A custom setting with this name already exists.\n\n Do you wish to overwrite it with the current setting?
16011 Windows was unable to change your display settings.\n\nPlease close the Display Properties, re-enter and try again.
16020 Device Settings
16021 Device Adjustments
17001 Default Monitor
17002 Plug and Play Monitor
17010 Display Properties
17011 Settings
17012 Reverting in %d seconds
17018 %d by %d pixels
17019 %d Hertz
17020 Windows will now apply your new display settings. This will take a few seconds, during which time your screen may flicker.\n\nIf your new settings are not applied correctly, your original display settings will be automatically restored in 15 seconds.
17021 Display Settings
17022 Custo&m OpenGL settings:
17023 Enabling OpenGL acceleration requires switching your current display setting to nView span mode. Do you wish to continue?
17024 Disabling OpenGL acceleration will attempt to restore dualview display setting. Do you wish to continue?
17026 First
17027 Second
17028 Third
17029 Fourth
17030 Fifth
17031 Sixth
17032 Seventh
17033 Eighth
17035 &Analog Display:
17036 &Digital Display:
17037 &TV:
17038 &Analog Display
17039 &Digital Display
17040 &TV
17041 TV Encoder Type:
17042 TV Codec Type:
17051 1x
17052 2x
17053 4x
17054 8x
17055 Use these control to select the degree of antialiasing to be used in OpenGL applications.
