106 The specified cluster name could not be found on the network. Make sure the cluster is running and your account has permission to connect to the cluster.
107 The Cluster Administrator has been successfully installed.
108 Microsoft Cluster Server has been successfully installed. You must reboot your machine for all changes to take effect. Reboot now?
109 An unexpected error occurred shutting down the system. Please reboot.
110 Copying cluster files...
111 Setting clusdisk parameters
112 Synchronizing registry data...
113 Creating cluster groups...
114 Adding cluster tools to the start menu...
115 Administrative Tools
116 Cluster Administrator
117 This will remove Microsoft Cluster Server. Are you sure you want to do this?
118 The specified cluster was found but did not respond to the join request.
120 Error adding clusdisk parameters :
121 An unrecoverable error occurred trying to synchronize fault tolerant set information.
122 Microsoft Cluster Server requires the NT LM Security Support Provider. Please ensure that this component has been installed on the system.
123 Error updating cluster registry information
124 Error opening registry key
125 Error initializing system drive information
126 Unexpected setup error
127 An unexpected fatal setup error has occurred. Setup cannot continue. You must run Setup again. The error code was %1!d! on line %2!d! of file %3.
128 You must enter a valid host IP address and subnet mask in dotted-decimal notation
129 You must select a network adapter
130 Microsoft Cluster Server runs on either Windows NT 5.0 or on Windows NT4.0 with Service Pack 3 or higher . Please install the correct version or service pack and run Setup again.
131 Starting the Microsoft Cluster Server Disk driver
132 Starting the Microsoft Cluster Server
133 The Microsoft Cluster Server Disk driver could not be started
134 The Microsoft Cluster Server could not be started
135 Choose a folder
136 The selected directory is invalid. Microsoft Cluster Server must be installed on a disk that is not on the shared SCSI bus.
137 The selected directory is invalid. Microsoft Cluster Server must be installed on a local fixed disk.
138 Configuring security for Microsoft Cluster Server
139 An error occurred configuring the account for Microsoft Cluster Server
140 An unrecoverable error occurred trying to synchronize disk information.
141 Microsoft Cluster Server has been successfully installed and started. You can manage your cluster with the Cluster Administrator, located in the Administrative Tools folder.
142 The selected directory is invalid.
143 Microsoft Cluster Server could not be installed. You must reboot before running setup again.
144 A file required by Setup is missing from the installation disk.
145 Disk Group %d
146 Disk
147 Disks
148 Cluster Group
149 Cluster IP Address
150 Cluster Name
151 Time Service
152 The Primary Domain Controller for this machine's domain could not be located. Since this machine is a Backup Domain Controller, Setup must contact the Primary Domain Controller to configure the cluster service account.
153 Cluster Network
154 The specified name is already in use on this network. You must enter a unique cluster name.
155 The specified cluster name is too long.
156 Public Network
157 No network adapter was configured for internal cluster use.
158 At least one shared disk must be selected for the cluster to use.
159 An unexpected error occurred checking free disk space on the quorum disk.
160 The selected quorum disk does not have enough available space. Microsoft Cluster Server requires at least 5MB of free disk space on the quorum disk.
161 Creating new node definition...
162 Error creating new node definition
163 Synchronizing resource configuration...
164 Error synchronizing resource configuration :
165 Uninstall
166 This disk cannot be used as a shared cluster disk because it contains partitions which are not NTFS. Only disks which are formatted to NTFS can be used as cluster disks. To use this disk as a cluster disk, exit Cluster Setup and use the CONVERT utility to change its filesystem to NTFS.
167 The cluster fault-tolerant drive resource %2 has an assigned drive letter %1:. This drive letter conflicts with a drive letter already assigned on this system. You should use Disk Administrator to change the local drive assignments before bringing the resource online on this system.
168 An error occurred trying to permanently assign the drive letters. This disk cannot be used as a cluster disk.
169 The NT LM Security Support Provider is unable to authenicate the supplied account and password. Please verify that this node is a member of or has a valid trust relationship with the account's domain.
170 Error creating directory on the quorum disk
171 This Fault Tolerant Set cannot be used as a shared cluster disk because it contains a partition which does not have a permanently assigned drive letter. All cluster disks must have permanently assigned drive letters. Do you want to permanently assign all the drive letters on this Fault Tolerant Set?
172 Either the specified account is not valid or the account's domain could not be contacted. Check the name and domain to make sure they were typed correctly.
173 Installing the cluster network provider...
174 Removing the cluster network provider...
175 The specified account is not an Administrator on this machine. Setup requires Administrative privileges to complete. Run setup again from an Administrator account.
176 The specified account is not an Administrator on this machine. Micrsoft Cluster Server must run in an account with Administrative privileges. Do you want to make the supplied account a member of the Administrators group?
178 The account could not be added to the local Administrators group.
179 This computer is not a member of an NT Domain. All machines in a cluster must be members of the same NT Domain. You can join a domain from the Network Control Panel applet.
180 This will exit Setup. You will need to run it again later to install Microsoft Cluster Server. Are you sure you want to cancel?
181 The password is incorrect. Please retype your password. Letters in passwords must be typed using the correct case. Make sure that Caps Lock is not accidentally on.
182 Microsoft Cluster Server requires that the TCP/IP network protocol be installed and bound to at least one network adapter. Please use the Network applet in the Control Panel to reconfigure your system and then run Windows NT Clusters setup again.
183 Microsoft Cluster Server could not be started. Setup has completed successfully, but the cluster service failed on startup. Check the eventlog for the reason. Before attempting to run setup again, you must uninstall the cluster software from the Add/Remove Programs applet in the control panel.
200 join
201 name
202 ipaddr
203 subnet
204 domain
205 password
206 account
207 excludedrive
208 quorum
209 uninstall
210 u
211 violatelicense
212 skiposcheck
213 localquorum
214 network
215 Cluster Network configuration could not be completed successfully because of one of the following reasons. Please ensure that at least one adapter is configured for internal cluster use and for client use.
216 No network adapter was configured for client use.
217 Only a single adapter is configured for internal cluster use. If you have multiple adapters, you may reconfigure them to avoid a single point of failure.
218 Must select one of the Installations Types
219 Unable to allocate memory
220 Unable to get the local computer name :
221 The network configuration for this system is incorrect. Please review your network settings to insure that TCP/IP has been installed for the networks that will be used for Microsoft Cluster Server.
228 An unrecoverable error occurred trying to synchronize this node with the cluster registry.
229 Microsoft Cluster Administrator has been successfully installed. Some installed files were in use and could not be updated. You must reboot your machine for all changes to take effect. Reboot now?
230 This node could not be added to the cluster because the cluster already contains the maximum number of nodes. You must evict a node from the cluster before this node can be added.
231 \n\nError ID: %d (%08.8x).
232 The Network Name you entered already exists. You must enter a unique Name.
233 An unexpected fatal setup error has occurred. Setup cannot continue. You must run Setup again. The error code was %1!d!
234 The TCP/IP address that you have entered does not match any of the existing subnets. Please check that this is a valid address before continuing.
235 The subnet mask that you have entered cannot be validated. Please verify that the value is correct before continuing.
236 Warning: This system is not attached to all defined cluster networks.
237 An unrecoverable error occurred trying to synchronize node information.
238 This system is not attached to any of the networks designated for internal cluster communication.
239 You have selected a disk drive that might be used for clustering. The files for Microsoft Cluster Server must be placed on a local disk drive. Please verify that you have selected a local disk drive before proceeding.
240 Installing Administrator Only. You can also make this a member on a cluster.
241 The specified IP address is already in use on the network. Please enter a unique address.
242 The following software packages should be removed before removing the Microsoft Cluster Server software.
243 Want to create the Directory
244 The Cluster that you are attempting to join already has two nodes. Microsoft Cluster Server supports a maximum of two nodes on a given cluster. Please choose another cluster to join.
245 Unable to get the existing nodes on the cluster .
246 The subnet mask you have entered (%2) cannot be used with the IP address you have entered (%1).
247 '%1' is an invalid IP address. An IP address must be specified in the form xxx.xxx.xxx.xxx, where xxx represents a decimal number between 0 and 255.
248 '%1' is an invalid subnet mask. A subnet mask must be specified in the form xxx.xxx.xxx.xxx, where xxx represents a decimal number between 0 and 255.
249 The subnet mask you have entered (%2) cannot be used with the IP address you have entered (%1).
250 The subnet mask that you have entered cannot be validated. Please verify that the value is correct before continuing.
251 Do you want to continue with uninstall.
252 New Cluster Network
253 Access to the specified cluster has been denied.
254 The specified cluster was found but it is incompatible with this version of Microsoft Cluster Server.
256 The Microsoft Cluster Server software has been successfully removed from your system. Please use Cluster Administrator to evict any unused nodes from the cluster. This change will allow new cluster nodes to be added. You must restart your computer before the new settings will take effect. Do you want to restart your computer now?
57344 Microsoft Cluster Server Setup
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
