home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 2000 May
/
Chip_2000-05_cd1.bin
/
servis
/
ovladace
/
drivers
/
K40160PE.EXE
/
FS-680.PPD
< prev
next >
Wrap
PostScript Printer Description
|
1999-03-23
|
23KB
|
627 lines
*PPD-Adobe: "4.3"
*%=============================================================================
*%
*% PPD file for FS-680 (EUROPE ENGLISH)
*%
*% Copyright (C) 1993-1998 Kyocera Technology Development Inc.
*% All Rights Reserved
*%
*% Permission is granted for redistribution of this file as long as this
*% copyright notice is intact and the contents of the file are not altered
*% in any way from their original form.
*%
*% Contents of this file are automatically generated by the PPDGEN utility
*%
*%=============================================================================
*FileVersion: "1.3.2"
*FormatVersion: "4.3"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*Product: "(FS-680)"
*PSVersion: "(48.0) 0"
*Manufacturer: "Kyocera"
*ModelName: "Kyocera FS-680 (KPDL-2)"
*ShortNickName: "Kyocera FS-680 (KPDL-2)"
*NickName: "Kyocera FS-680 (KPDL-2)"
*PCFileName: "FS-680.PPD"
*% Basic Device Capabilities
*LanguageLevel: "2"
*ColorDevice: False
*DefaultColorSpace: Gray
*TTRasterizer: Type42
*?TTRasterizer: "
save
42 /FontType resourcestatus
{ pop pop (Type42) }{ pop pop (None) } ifelse = flush
restore"
*End
*FreeVM: "534000"
*Throughput: "8"
*% System Management
*SuggestedJobTimeout: "0"
*SuggestedManualFeedTimeout: "0"
*SuggestedWaitTimeout: "120"
*PrintPSErrors: True
*Password: "0"
*ExitServer: " count 0 eq { true }
{ dup statusdict /checkpassword get exec not } ifelse
{ (WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush quit } if
serverdict /exitserver get exec"
*End
*Reset: " count 0 eq { true }
{ dup statusdict /checkpassword get exec not } ifelse
{ (WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush quit } if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush"
*End
*% Emulations
*Protocols: BCP PJL TBCP
*1284Modes Parallel: Compat Nibble ECP
*1284DeviceID: "MFG:Kyocera:Model:Kyocera FS-680;COMMAND SET: POSTSCRIPT, PJL, PCL"
*Emulators: diablo630 hpgl hplj proprinter
*StartEmulator_diablo630: "<04>!R!SEM2;EXIT;"
*StopEmulator_diablo630: "!R!SEM9;EXIT;<04>"
*StartEmulator_hpgl: "<04>!R!SEM8;EXIT;"
*StopEmulator_hpgl: "!R!SEM9;EXIT;<04>"
*StartEmulator_hplj: "<04>!R!SEM6;EXIT;"
*StopEmulator_hplj: "!R!SEM9;EXIT;<04>"
*StartEmulator_proprinter: "<04>!R!SEM1;EXIT;"
*StopEmulator_proprinter: "!R!SEM9;EXIT;<04>"
*% JCL Information
*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE=POSTSCRIPT<0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ<0A><1B>%-12345X"
*JCLOpenUI *JCLEconomode/EcoPrint: PickOne
*DefaultJCLEconomode: Off
*OrderDependency: 5 JCLSetup *JCLEconomode
*JCLEconomode Off/Off: "@PJL SET ECONOMODE=OFF<0A>"
*JCLEconomode On/On: "@PJL SET ECONOMODE=ON<0A>"
*JCLCloseUI: *JCLEconomode
*JCLOpenUI *JCLEcoPower/EcoPower: PickOne
*DefaultJCLEcoPower: Off
*OrderDependency: 5 JCLSetup *JCLEcoPower
*JCLEcoPower Off/Off: "@PJL SET POWERSAVE=OFF<0A>"
*JCLEcoPower 5/5 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=5<0A>"
*JCLEcoPower 15/15 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=15<0A>"
*JCLEcoPower 30/30 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=30<0A>"
*JCLEcoPower 45/45 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=45<0A>"
*JCLEcoPower 60/60 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=60<0A>"
*JCLEcoPower 90/90 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=90<0A>"
*JCLEcoPower 120/120 Minutes: "@PJL SET POWERSAVE=ON<0A>@PJL SET POWERSAVETIME=120<0A>"
*JCLCloseUI: *JCLEcoPower
*JCLOpenUI *JCLPrintDensity/Print Density: PickOne
*DefaultJCLPrintDensity: 3
*OrderDependency: 5 JCLSetup *JCLPrintDensity
*JCLPrintDensity 1/Light: "@PJL SET DENSITY=1<0A>"
*JCLPrintDensity 3/Medium: "@PJL SET DENSITY=3<0A>"
*JCLPrintDensity 5/Dark: "@PJL SET DENSITY=5<0A>"
*JCLCloseUI: *JCLPrintDensity
*JCLOpenUI *JCLImageAdapt/Image Adapt: PickOne
*DefaultJCLImageAdapt: Auto
*OrderDependency: 5 JCLSetup *JCLImageAdapt
*JCLImageAdapt Auto/Auto: "@PJL SET IMAGEADAPT=AUTO<0A>"
*JCLImageAdapt On/On: "@PJL SET IMAGEADAPT=ON<0A>"
*JCLImageAdapt Off/Off: "@PJL SET IMAGEADAPT=OFF<0A>"
*JCLCloseUI: *JCLImageAdapt
*JCLOpenUI *JCLFrontPanelLang/Front Panel Language: PickOne
*DefaultJCLFrontPanelLang: English
*OrderDependency: 5 JCLSetup *JCLFrontPanelLang
*JCLFrontPanelLang English/English: "@PJL SET LANG=ENGLISH<0A>"
*JCLFrontPanelLang French/French: "@PJL SET LANG=FRENCH<0A>"
*JCLFrontPanelLang German/German: "@PJL SET LANG=GERMAN<0A>"
*JCLFrontPanelLang Italian/Italian: "@PJL SET LANG=ITALIAN<0A>"
*JCLFrontPanelLang Spanish/Spanish: "@PJL SET LANG=SPANISH<0A>"
*JCLCloseUI: *JCLFrontPanelLang
*% Installable Options
*OpenGroup: InstallableOptions/Installed Options
*% HSM added - 25.05.98
*OpenUI *Option1/Secure Font Print Mode: Boolean
*DefaultOption1: True
*Option1 True/On: ""
*Option1 False/Off: ""
*CloseUI: *Option1
*% --------------------
*% Paper Feeder (PF-16)
*OpenUI *Opt12/Paper Feeder (PF-16): Boolean
*DefaultOption12: False
*Opt12 True/Installed: ""
*Opt12 False/Not Installed: ""
*CloseUI: *Opt12
*% Installed Memory
*OpenUI *InstalledMemory/Memory Upgrade: PickOne
*DefaultInstalledMemory: 2MB
*InstalledMemory 2MB/Standard: ""
*InstalledMemory 6MB/4MB Upgrade: ""
*InstalledMemory 10MB/8MB Upgrade: ""
*InstalledMemory 34MB/32MB Upgrade: ""
*CloseUI: *InstalledMemory
*CloseGroup: InstallableOptions
*% Virtual Memory
*VMOption 2MB: "534000"
*VMOption 6MB: "3888000"
*VMOption 10MB: "7248000"
*VMOption 34MB: "27408000"
*% Constraints
*% ===========
*% Constrain Multiple Optional Feeders
*% Constrain Optional Feeder Input Slots
*% Constrain Paper Feeder Input Slots
*UIConstraints: *Opt12 False *InputSlot PF16
*UIConstraints: *InputSlot PF16 *Opt12 False
*% Constrain Duplex Options
*% Constrain Hard Disk Options
*% Constrain Hard Disk Options
*% Constrain Staple Options
*% Constrain Multiple Output Options
*% Constrain Output Bins
*% Constrain Internal Cassette Paper Sizes
*UIConstraints: *PageSize Executive *InputSlot Internal
*UIConstraints: *PageRegion Executive *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize Executive
*UIConstraints: *InputSlot Internal *PageRegion Executive
*UIConstraints: *PageSize A6 *InputSlot Internal
*UIConstraints: *PageRegion A6 *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize A6
*UIConstraints: *InputSlot Internal *PageRegion A6
*UIConstraints: *PageSize B6 *InputSlot Internal
*UIConstraints: *PageRegion B6 *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize B6
*UIConstraints: *InputSlot Internal *PageRegion B6
*UIConstraints: *PageSize EnvPersonal *InputSlot Internal
*UIConstraints: *PageRegion EnvPersonal *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize EnvPersonal
*UIConstraints: *InputSlot Internal *PageRegion EnvPersonal
*UIConstraints: *PageSize Env9 *InputSlot Internal
*UIConstraints: *PageRegion Env9 *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize Env9
*UIConstraints: *InputSlot Internal *PageRegion Env9
*UIConstraints: *PageSize Env10 *InputSlot Internal
*UIConstraints: *PageRegion Env10 *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize Env10
*UIConstraints: *InputSlot Internal *PageRegion Env10
*UIConstraints: *PageSize EnvMonarch *InputSlot Internal
*UIConstraints: *PageRegion EnvMonarch *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize EnvMonarch
*UIConstraints: *InputSlot Internal *PageRegion EnvMonarch
*UIConstraints: *PageSize EnvDL *InputSlot Internal
*UIConstraints: *PageRegion EnvDL *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize EnvDL
*UIConstraints: *InputSlot Internal *PageRegion EnvDL
*UIConstraints: *PageSize EnvC5 *InputSlot Internal
*UIConstraints: *PageRegion EnvC5 *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize EnvC5
*UIConstraints: *InputSlot Internal *PageRegion EnvC5
*% Constrain Paper Sizes for Option Feeders
*% Constrain Paper Sizes for Duplex Options
*% Resolution
*OpenUI *Resolution/Resolution: PickOne
*OrderDependency: 10 AnySetup *Resolution
*DefaultResolution: 600dpi
*Resolution 600dpi/600 Dots per Inch (dpi): "<< /HWResolution [600 600] >> setpagedevice"
*Resolution 300dpi/300 Dots per Inch (dpi): "<< /HWResolution [300 300] >> setpagedevice"
*?Resolution: "
save
currentpagedevice /HWResolution get
0 get ( ) cvs print (dpi) = flush
restore
"
*End
*CloseUI: *Resolution
*% Image Refinement
*OpenUI *Smoothing/KIR: PickOne
*OrderDependency: 50 AnySetup *Smoothing
*DefaultSmoothing: Medium
*Smoothing None/Off: "0 statusdict /setdoret get exec"
*Smoothing Light/Light: "1 statusdict /setdoret get exec"
*Smoothing Medium/Medium: "2 statusdict /setdoret get exec"
*Smoothing Dark/Dark: "3 statusdict /setdoret get exec"
*?Smoothing: "save
[(None)(Light)(Medium)(Dark)]
statusdict /doret get exec {get} stopped
{pop pop (Unknown) } if
= flush restore
"
*End
*CloseUI: *Smoothing
*% Halftone Information
*DefaultHalftoneType: 1
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*ResScreenFreq 600dpi: "60.0"
*ResScreenAngle 600dpi: "45.0"
*ResScreenFreq 300dpi: "53.0"
*ResScreenAngle 300dpi: "45.0"
*DefaultScreenProc: Ellipse
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt
{1 sub dup mul exch 1 sub dup mul add 1 sub}
{dup mul exch dup mul add 1 exch sub} ifelse}"
*End
*ScreenProc Line: "
{pop}"
*End
*ScreenProc Ellipse: "
{dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub}"
*End
*DefaultTransfer: Null
*Transfer Null: "{}"
*Transfer Null.Inverse: "{1 exch sub}"
*% Paper Handling
*% Page Size Definitions
*OpenUI *PageSize: PickOne
*OrderDependency: 40 AnySetup *PageSize
*DefaultPageSize: A4
*PageSize A4/A4: "
<< /Policies << /PageSize 2 >> /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageSize A5/A5: "
<< /Policies << /PageSize 2 >> /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*End
*PageSize A6/A6: "
<< /Policies << /PageSize 2 >> /PageSize [297 420] /ImagingBBox null >> setpagedevice"
*End
*PageSize B5/B5 (JIS): "
<< /Policies << /PageSize 2 >> /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageSize ISOB5/B5 (ISO): "
<< /Policies << /PageSize 2 >> /PageSize [499 709] /ImagingBBox null >> setpagedevice"
*End
*PageSize B6/B6: "
<< /Policies << /PageSize 2 >> /PageSize [363 516] /ImagingBBox null >> setpagedevice"
*End
*PageSize Letter/Letter: "
<< /Policies << /PageSize 2 >> /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageSize Legal/Legal: "
<< /Policies << /PageSize 2 >> /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageSize Executive/Executive: "
<< /Policies << /PageSize 2 >> /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*PageSize EnvPersonal/Envelope #6: "
<< /Policies << /PageSize 2 >> /PageSize [261 468] /ImagingBBox null >> setpagedevice"
*End
*PageSize Env9/Envelope #9: "
<< /Policies << /PageSize 2 >> /PageSize [279 639] /ImagingBBox null >> setpagedevice"
*End
*PageSize Env10/Envelope #10: "
<< /Policies << /PageSize 2 >> /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*End
*PageSize EnvMonarch/Envelope Monarch: "
<< /Policies << /PageSize 2 >> /PageSize [279 540] /ImagingBBox null >> setpagedevice"
*End
*PageSize EnvDL/Envelope DL: "
<< /Policies << /PageSize 2 >> /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*End
*PageSize EnvC5/Envelope C5: "
<< /Policies << /PageSize 2 >> /PageSize [459 649] /ImagingBBox null >> setpagedevice"
*End
*?PageSize: "
save
currentpagedevice /PageSize get aload pop
2 copy gt {exch} if
(Unknown)
15 dict
dup [595 842] (A4) put
dup [420 595] (A5) put
dup [297 420] (A6) put
dup [516 729] (B5) put
dup [499 709] (ISOB5) put
dup [363 516] (B6) put
dup [612 792] (Letter) put
dup [612 1008] (Legal) put
dup [522 756] (Executive) put
dup [261 468] (EnvPersonal) put
dup [279 639] (Env9) put
dup [297 684] (Env10) put
dup [279 540] (EnvMonarch) put
dup [312 624] (EnvDL) put
dup [459 649] (EnvC5) put
{ exch aload pop 4 index sub abs 5 le exch
5 index sub abs 5 le and
{exch pop exit} {pop} ifelse
} bind forall
= flush pop pop
restore
"
*End
*CloseUI: *PageSize
*% Page Region Definitions for Frame Buffer
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: A4
*PageRegion A4/A4: "
<< /Policies << /PageSize 7 >> /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A5/A5: "
<< /Policies << /PageSize 7 >> /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A6/A6: "
<< /Policies << /PageSize 7 >> /PageSize [297 420] /ImagingBBox null >> setpagedevice"
*End
*PageRegion B5/B5 (JIS): "
<< /Policies << /PageSize 7 >> /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageRegion ISOB5/B5 (ISO): "
<< /Policies << /PageSize 7 >> /PageSize [499 709] /ImagingBBox null >> setpagedevice"
*End
*PageRegion B6/B6: "
<< /Policies << /PageSize 7 >> /PageSize [363 516] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Letter/Letter: "
<< /Policies << /PageSize 7 >> /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Legal/Legal: "
<< /Policies << /PageSize 7 >> /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Executive/Executive: "
<< /Policies << /PageSize 7 >> /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*PageRegion EnvPersonal/Envelope #6: "
<< /Policies << /PageSize 7 >> /PageSize [261 468] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Env9/Envelope #9: "
<< /Policies << /PageSize 7 >> /PageSize [279 639] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Env10/Envelope #10: "
<< /Policies << /PageSize 7 >> /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*End
*PageRegion EnvMonarch/Envelope Monarch: "
<< /Policies << /PageSize 7 >> /PageSize [279 540] /ImagingBBox null >> setpagedevice"
*End
*PageRegion EnvDL/Envelope DL: "
<< /Policies << /PageSize 7 >> /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*End
*PageRegion EnvC5/Envelope C5: "
<< /Policies << /PageSize 7 >> /PageSize [459 649] /ImagingBBox null >> setpagedevice"
*End
*CloseUI: *PageRegion
*% Imageable Area Definitions
*DefaultImageableArea: A4
*ImageableArea A4/A4: "12 10 583 832"
*ImageableArea A5/A5: "12 10 409 585"
*ImageableArea A6/A6: "12 10 285 411"
*ImageableArea B5/B5 (JIS): "21 10 495 719"
*ImageableArea ISOB5/B5 (ISO): "21 10 478 699"
*ImageableArea B6/B6: "12 10 352 506"
*ImageableArea Letter/Letter: "12 8 600 784"
*ImageableArea Legal/Legal: "12 8 600 1000"
*ImageableArea Executive/Executive: "12 8 510 748"
*ImageableArea EnvPersonal/Envelope #6: "12 8 249 460"
*ImageableArea Env9/Envelope #9: "12 8 267 631"
*ImageableArea Env10/Envelope #10: "12 8 285 676"
*ImageableArea EnvMonarch/Envelope Monarch: "12 8 267 532"
*ImageableArea EnvDL/Envelope DL: "12 10 300 614"
*ImageableArea EnvC5/Envelope C5: "12 10 447 639"
*?ImageableArea: " save
/cvp { cvi ( ) cvs
print ( ) print } bind def
newpath clippath pathbbox
4 -2 roll exch 2 {ceiling cvp} repeat
exch 2 {floor cvp} repeat ( ) = flush
restore"
*End
*% Physical Dimensions of Media
*DefaultPaperDimension: A4
*PaperDimension A4/A4: "595 842"
*PaperDimension A5/A5: "420 595"
*PaperDimension A6/A6: "297 420"
*PaperDimension B5/B5 (JIS): "516 729"
*PaperDimension ISOB5/B5 (ISO): "499 709"
*PaperDimension B6/B6: "363 516"
*PaperDimension Letter/Letter: "612 792"
*PaperDimension Legal/Legal: "612 1008"
*PaperDimension Executive/Executive: "522 756"
*PaperDimension EnvPersonal/Envelope #6: "261 468"
*PaperDimension Env9/Envelope #9: "279 639"
*PaperDimension Env10/Envelope #10: "297 684"
*PaperDimension EnvMonarch/Envelope Monarch: "279 540"
*PaperDimension EnvDL/Envelope DL: "312 624"
*PaperDimension EnvC5/Envelope C5: "459 649"
*%=== Custom Page Size Definitions
*%=== Input Slot Definitions
*OpenUI *InputSlot: PickOne
*OrderDependency: 30 AnySetup *InputSlot
*DefaultInputSlot: Internal
*InputSlot Internal/Cassette 1 (Internal): "
<< /ManualFeed false >> setpagedevice
statusdict begin 0 setpapertray end "
*End
*InputSlot PF16/Cassette 2 (PF-16): "
<< /ManualFeed false >> setpagedevice
statusdict begin 1 setpapertray end "
*End
*?InputSlot: "
"
*End
*CloseUI: *InputSlot
*RequiresPageRegion All: True
*% Manual Feed Definitions
*OpenUI *ManualFeed/Manual Feed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True/True: "<< /ManualFeed true >> setpagedevice"
*ManualFeed False/False: "<< /ManualFeed false >> setpagedevice"
*?ManualFeed: " save
currentpagedevice /ManualFeed get
{(True)}{(False)} ifelse = flush
restore"
*End
*CloseUI: *ManualFeed
*% Tray Switch Definitions
*OpenUI *TraySwitch/Auto Tray Switch: Boolean
*OrderDependency: 25 AnySetup *TraySwitch
*DefaultTraySwitch: False
*TraySwitch True/On: "<< /TraySwitch true >> setpagedevice"
*TraySwitch False/Off: "<< /TraySwitch false >> setpagedevice"
*?TraySwitch: " save
currentpagedevice /TraySwitch get
{(True)}{(False)} ifelse = flush
restore"
*End
*CloseUI: *TraySwitch
*% PPD Version Info
*OpenUI *KCVersion/PPD Version: PickOne
*OrderDependency: 25 AnySetup *KCVersion
*DefaultKCVersion: Default
*KCVersion Default/1.3.2: ""
*CloseUI: *KCVersion
*% Font Information
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
*Font Bookman-Demi: Standard "(001.003S)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.003S)" Standard ROM
*Font Bookman-Light: Standard "(001.003S)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.003S)" Standard ROM
*Font Courier: Standard "(002.004S)" Standard ROM
*Font Courier-Bold: Standard "(002.004S)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
*Font Courier-Oblique: Standard "(002.004S)" Standard ROM
*Font Helvetica: Standard "(001.006S)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
*Font Palatino-Bold: Standard "(001.005S)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
*Font Palatino-Italic: Standard "(001.005S)" Standard ROM
*Font Palatino-Roman: Standard "(001.005S)" Standard ROM
*Font Symbol: Special "(001.007S)" Special ROM
*Font Times-Bold: Standard "(001.007S)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
*Font Times-Italic: Standard "(001.007S)" Standard ROM
*Font Times-Roman: Standard "(001.007S)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
*Font ZapfDingbats: Special "(001.004S)" Special ROM
*Font Helvetica-Light: Standard "(001.000S)" Standard ROM
*Font Helvetica-LightOblique: Standard "(001.000S)" Standard ROM
*Font Helvetica-Black: Standard "(001.000S)" Standard ROM
*Font Helvetica-BlackOblique: Standard "(001.000S)" Standard ROM
*Font Korinna-Regular: Standard "(001.000S)" Standard ROM
*Font Korinna-KursivRegular: Standard "(001.000S)" Standard ROM
*Font Korinna-Bold: Standard "(001.000S)" Standard ROM
*Font Korinna-KursivBold: Standard "(001.000S)" Standard ROM
*Font Garamond-Light: Standard "(001.000S)" Standard ROM
*Font Garamond-LightItalic: Standard "(001.000S)" Standard ROM
*Font Garamond-Bold: Standard "(001.000S)" Standard ROM
*Font Garamond-BoldItalic: Standard "(001.000S)" Standard ROM
*?FontQuery: "save
/str 100 string dup 0 (fonts/) putinterval def
{ count 1 gt
{ exch dup str 6 94 getinterval cvs
(/) print dup print (:) print exch
FontDirectory exch known
{ pop (Yes) }
{ length 6 add str 0 3 -1 roll getinterval
mark exch status
{ cleartomark (Yes)}{cleartomark (No)} ifelse
} ifelse = flush }
{ exit } ifelse
} bind loop
(*) = flush
restore"
*End
*?FontList: "save
FontDirectory { pop == } bind forall
(*) = flush
restore"
*End
*% Printer Messages
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "warming up"/warming up
*Status: "idle"/idle
*Status: "busy"/busy
*Status: "waiting"/waiting
*Status: "printing"/printing
*Status: "initializing"/initializing
*Status: "printing test page"/printing test page
*% Printer Error (format: %%[ PrinterError: <one of these> ]%% )
*PrinterError: "paper entry misfeed"
*PrinterError: "no paper tray"
*PrinterError: "out of paper"
*PrinterError: "toner low (halt)"
*PrinterError: "warming up"
*PrinterError: "other reason"
*PrinterError: "video interface mode"
*PrinterError: "offline"
*PrinterError: "toner low (warning)"
*% Input Sources (format: %%[ status: <stat>;source:<one of these> ]%% )
*Source: "Serial 25"
*Source: "Parallel"
*Source: "EtherTalk"
*Source: "Optional"
*% End of PPD file for Kyocera FS-680 (European English)