;If tray 3 is not installed OR If tray 3 is installed ;
;Back fig1 -> Main fig1 -> OR Back fig2 -> Main fig2 ->
[CodesToBmps]
300300=4,86,6,5
110200=9,110,11,57
310200=9,110,11,57
111112=9,89,11,10
111110=1,85,3,2
111111=9,89,11,10
600000=113,114,115,116
600100=1,85,3,2
610100=1,87,3,7
600300=1,90,3,12
600400=1,88,3,8
310100=9,85,11,2
410000=30,93,32,31
410100=30,93,32,31
410200=30,93,32,31
410300=30,93,32,31
410400=30,93,32,31
410500=30,93,32,31
410600=30,93,32,31
410700=30,93,32,31
410800=30,93,32,31
410900=30,93,32,31
411000=30,93,32,31
411100=30,93,32,31
411200=30,93,32,31
410001=24,94,26,33
410101=24,94,26,33
410201=24,94,26,33
410301=24,94,26,33
410401=24,94,26,33
410501=24,94,26,33
410601=24,94,26,33
410701=24,94,26,33
410801=24,94,26,33
410901=24,94,26,33
411001=24,94,26,33
411101=24,94,26,33
411201=24,94,26,33
410002=24,95,26,34
410102=24,95,26,34
410302=24,95,26,34
410003=26,96,26,96
410103=26,96,26,96
410303=26,96,26,96
400101=36,98,38,37
400102=39,99,41,40
400103=42,100,42,100
400104=43,101,45,44
400201=19,102,20,46
400202=20,103,20,103
400301=47,104,49,48
400401=9,106,11,53
400402=50,105,52,51
400403=54,107,56,55
400501=24,97,26,35
400602=4,86,6,5
400701=9,111,11,58
400800=19,81,20,16
400801=19,84,20,23
400802=19,83,20,18
400803=19,82,20,17
400900=19,81,20,16
400901=19,84,20,23
400902=19,83,20,18
400903=19,82,20,17
401001=9,91,11,25
401101=9,112,11,59
401102=9,112,11,59
401201=9,91,11,25
600101=9,110,11,57
600201=9,110,11,57
600301=9,110,11,57
600401=9,110,11,57
600501=9,110,11,57
600601=9,110,11,57
600701=9,110,11,57
600801=9,110,11,57
900901=9,110,11,57
901001=9,110,11,57
901101=9,110,11,57
901201=9,110,11,57
901301=9,110,11,57
99999901=9,89,11,10
99999902=9,89,11,10
99999903=9,89,11,10
[WarningMessages]
700101=Paper is Empty in Tray1
700102=Paper is Empty in Tray2
700103=Paper is Empty in Tray3
710102=Paper is low in Tray2
710103=Paper is low in Tray3
710101=Paper is low in Tray2
300101=Toner Low (Black)
300102=Toner Low (Yellow)
300103=Toner Low (Magenta)
300104=Toner Low (Cyan)
300201=Drum life almost over
300301=Tray2 Paper Low
300302=Tray3 Paper Low
310100=Buffer overflow
500301=Drum life almost over
[ErrorMessages]
300300=1;NIC Failure;The installed Network Interface Card is not responding.\n1. Power off the Printer, then power on the printer.\n2. If Problem persists, refer to the User's Manual or Contact Technical Support.
110200=1;Parallel Port I/O Error;1. Power off the Printer, then power on the printer.\n2. If Problem persists, refer to the User's Manual or Contact Technical Support.
310200=1;Video Underrun;1. Change to lower resolution.\n2. If Problem persists, refer to the User's Manual or Contact Technical Support.
111110=2;Connecting to printer.
111111=1;Printer Power Off or Communication Error;1. Check if the printer is turned on.\n2. Check printer power cord.\n3. Check printer cable.
111112=1;Fatal Print Spooler Error;There is a problem with the Windows Print Spooler.\nThis could be caused by:\n1. Spooler is off-line (reboot)\n2. No printer installed (reinstall)
300101=3;Toner Low (Black);Change the black toner
300102=3;Toner Low (Yellow);Change the yellow toner
300103=3;Toner Low (Magenta);Change the magenta toner
300104=3;Toner Low (Cyan);Change the cyan toner
300201=3;Drum Life is almost end.;Change the drum unit
300301=3;Tray2 Paper Low;Add more paper in Tray 2
300302=3;Tray3 Paper Low;Add more paper in Tray 3
310100=1;Buffer overflow;Print current page (only insufficient image)
410000=2;Load Letter paper on Tray1 (Manual);1.Load Letter paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410100=2;Load Legal paper on Tray1 (Manual);1.Load Legal paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410200=2;Load Executive paper on Tray1 (Manual);1.Load Executive paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410300=2;Load A4 paper on Tray1 (Manual);1.Load A4 paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410400=2;Load A5 paper on Tray1 (Manual);1.Load A5 paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410500=2;Load Envelope Monarch paper on Tray1 (Manual);1.Load Envelope Monarch paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410600=2;Load Envelope Com-10 paper on Tray1 (Manual);1.Load Envelope Com-10 paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410700=2;Load Envelope DL paper on Tray1 (Manual);1.Load Envelope DL paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410800=2;Load Envelope C5 paper on Tray1 (Manual);1.Load Envelope C5 paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410900=2;Load Envelope B5 paper on Tray1 (Manual);1.Load Envelope B5 paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
411000=2;Load JIS B5 paper on Tray1 (Manual);1.Load JIS B5 paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
411100=2;Load J-Post paper on Tray1 (Manual);1.Load J-Post paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
411200=2;Load Invoice paper on Tray1 (Manual);1.Load Invoice paper into Tray1 (Manual).\n2.Press the ACTION key button on the front panel.
410001=3;Load Letter paper on Tray1;Load Letter paper into the tray.
410101=3;Load Legal paper on Tray1;Load Legal paper into the tray.
410201=3;Load Executive paper on Tray1;Load Executive paper into the tray.
410301=3;Load A4 paper on Tray1;Load A4 paper into the tray.
410401=3;Load A5 paper on Tray1;Load A5 paper into the tray.
410501=3;Load Envelope Monarch paper on Tray1;Load Envelope Monarch paper into the tray.
410601=3;Load Envelope Com-10 paper on Tray1;Load Envelope Com-10 paper into the tray.
410701=3;Load Envelope DL paper on Tray1;Load Envelope DL paper into the tray.
410801=3;Load Envelope C5 paper on Tray1;Load Envelope C5 paper into the tray.
410901=3;Load Envelope B5 paper on Tray1;Load Envelope B5 paper into the tray.
411001=3;Load JIS B5 paper on Tray1;Load JIS B5 paper into the tray.
411101=3;Load J-Post paper on Tray1;Load J-Post paper into the tray.
411201=3;Load Invoice paper on Tray1;Load Invoice paper into the tray.
410002=3;Load Letter paper on Tray2;1. Load Letter paper into the tray.\n2. Set the Tray Size setting accordingly.
410102=3;Load Legal paper on Tray2;1. Load Legal paper into the tray.\n2. Set the Tray Size setting accordingly.
410202=3;Load Executive paper on Tray2;1. Load Executive paper into the tray.\n2. Set the Tray Size setting accordingly.
410302=3;Load A4 paper on Tray2;1. Load A4 paper into the tray.\n2. Set the Tray Size setting accordingly.
410402=3;Load A5 paper on Tray2;1. Load A5 paper into the tray.\n2. Set the Tray Size setting accordingly.
410502=3;Load Envelope Monarch paper on Tray2;1. Load Envelope Monarch paper into the tray.\n2. Set the Tray Size setting accordingly.
410602=3;Load Envelope Com-10 paper on Tray2;1. Load Envelope Com-10 paper into the tray.\n2. Set the Tray Size setting accordingly.
410702=3;Load Envelope DL paper on Tray2;1. Load Envelope DL paper into the tray.\n2. Set the Tray Size setting accordingly.
410802=3;Load Envelope C5 paper on Tray2;1. Load Envelope C5 paper into the tray.\n2. Set the Tray Size setting accordingly.
410902=3;Load Envelope B5 paper on Tray2;1. Load Envelope B5 paper into the tray.\n2. Set the Tray Size setting accordingly.
411002=3;Load JIS B5 paper on Tray2;1. Load JIS B5 paper into the tray.\n2. Set the Tray Size setting accordingly.
411102=3;Load J-Post paper on Tray2;1. Load J-Post paper into the tray.\n2. Set the Tray Size setting accordingly.
411202=3;Load Invoice paper on Tray2;1.Load Invoice paper into the tray.\n2. Set the Tray Size setting accordingly.
410003=3;Load Letter paper on Tray3;1. Load Letter paper into the tray.\n2. Set the Tray Size setting accordingly.
410103=3;Load Legal paper on Tray3;1. Load Legal paper into the tray.\n2. Set the Tray Size setting accordingly.
410203=3;Load Executive paper on Tray3;1. Load Executive paper into the tray.\n2. Set the Tray Size setting accordingly.
410303=3;Load A4 paper on Tray3;1. Load A4 paper into the tray.\n2. Set the Tray Size setting accordingly.
410403=3;Load A5 paper on Tray3;1. Load A5 paper into the tray.\n2. Set the Tray Size setting accordingly.
410503=3;Load Envelope Monarch paper on Tray3;1. Load Envelope Monarch paper into the tray.\n2. Set the Tray Size setting accordingly.
410603=3;Load Envelope Com-10 paper on Tray3;1. Load Envelope Com-10 paper into the tray.\n2. Set the Tray Size setting accordingly.
410703=3;Load Envelope DL paper on Tray3;1. Load Envelope DL paper into the tray.\n2. Set the Tray Size setting accordingly.
410803=3;Load Envelope C5 paper on Tray3;1. Load Envelope C5 paper into the tray.\n2. Set the Tray Size setting accordingly.
410903=3;Load Envelope B5 paper on Tray3;1. Load Envelope B5 paper into the tray.\n2. Set the Tray Size setting accordingly.
411003=3;Load JIS B5 paper on Tray3;1. Load JIS B5 paper into the tray.\n2. Set the Tray Size setting accordingly.
411103=3;Load J-Post paper on Tray3;1. Load J-Post paper into the tray.\n2. Set the Tray Size setting accordingly.
400101=1;Paper Empty Tray1;Add paper in Tray1
400102=1;Paper Empty Tray2;Add paper in Tray2
400103=1;Paper Empty Tray3;Add paper in Tray3
400104=1;Out of paper in all trays;Add paper in Trays
400201=1;Tray2 is not inserted firmly.;Close Tray2 firmly
400202=1;Tray3 is not inserted firmly.;Close Tray3 firmly
400301=1;Printer Cover Open;Close the printer cover
400401=1;PaperJam A;Open the front cover or the selected paper source. Remove the jammed paper
400402=1;PaperJam B;Open the front cover and remove the jammed paper
400403=1;PaperJam C;Open the back cover and remove the jammed paper
400501=3;Paper Size Error;Put proper paper in the selected tray
400602=1;I/O Error Network;There is a problem with the Network Board.\n1. Power off the Printer. Check to see if the Network Card is properly installed.Unplug the connector and then replace it back into the printer, then power on the printer.\n2. Refer to the User's Manual or Call Technical Support.
400701=1;Need Oil Roller;Put oil roller into Fuser Unit
400800=1;Replace Black Toner;Open cover and replace black toner cartridge
400801=1;Replace Yellow Toner;Open cover and replace yellow toner cartridge
400802=1;Replace Magenta Toner;Open cover and replace magenta toner cartridge
400803=1;Replace Cyan Toner;Open cover and replace cyan toner cartridge
400900=1;Put Black Toner Cartridge;Open cover and put black toner cartridge
400901=1;Put Yellow Toner Cartridge;Open cover and put yellow toner cartridge
400902=1;Put Magenta Toner Cartridge;Open cover and put magenta toner cartridge
400903=1;Put Cyan Toner Cartridge;Open cover and put cyan toner cartridge
401001=1;Put Drum;Open cover and put drum unit
401101=1;Put waste toner bottle;Open cover and put waste toner bottle
401102=1;Replace waste toner bottle;Open cover and replace waste toner bottle
401201=1;Replace drum unit;Open cover and replace drum unit
600000=2;Press the ACTION key;Press the ACTION key button on the front panel to continue printing.
600100=2;Printer Ready
600300=2;Power Save
600400=2;Warming up
610100=2;Printing
600101=1;Fatal Error Toner Rack;There is a problem with the Toner Rack. Call Technical Support.
600201=1;Fatal Error Toner motor;There is a problem with the Toner motor. Call Technical Support.
600301=1;Fatal Error Main motor;There is a problem with the Main motor. Call Technical Support.
600401=1;Fatal Error Transfer Belt;There is a problem with the Transfer Belt. Call Technical Support.
600501=1;Fatal Error Transfer Roller;There is a problem with the Transfer Roller. Call Technical Support.
600601=1;Fatal Error SRAM;There is a problem with SRAM.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
600701=1;Fatal Error DRAM;There is a problem with DRAM.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
600801=1;Fatal Error ROM;There is a problem with ROM.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
900901=1;Fatal Error Engine I/F;There is a problem with Engine Interface.\n1.Power off the printer, wait for few seconds. Then power it back on again.\n2.Call Technical Support.
901001=1;Fatal Error Fuser;There is a problem with Fuser. Call Technical Support.
901101=1;Fatal Error Fan Motor;There is a problem with Fan Motor. Call Technical Support.
901201=1;Fatal Error Laser Unit;There is a problem with Laser Unit. Call Technical Support.
901301=1;Fatal Error CPU;There is a problem with CPU. Call Technical Support.
99999901=1;Bi-Directional Printer Communications Disabled;Status Monitor requires Bi-Directional Printer Communication to be enabled
99999902=2;Printer not attached to local port;Non-LPT port connections are not supported by this status monitor.\nIf the printer is networked, please use the HTML status page.
99999903=2;Mismatched Printer;This printer status monitor will only work with the Minolta Color PageWorks/Pro L.
