519 Failed to initialize Object Linking and Embedding
545 SolidWorks 97Plus Internet Viewer
10017 F
10018 Density: %1 %2\n\n
10019 Mass: %1 %2\n\n
10020 ( Fixed Shape )
10021 Summary Info
10022 Group
10023 Attribute
10024 Attribute-Definition
10025 Please select entities from components in the current assembly.
10026 Future Version
10027 You cannot add an assembly to itself. Please try again.
10028 You must select a point inside the original assembly window.
10029 Select a part/assembly to add to the current assembly.
10030 Select a point in the assembly view to place the component.
10031 Densities vary for assemblies.\n\n
10032 Select location of the new view.
10033 Select a drawing view.
10034 Select a plane in the model to orient with respect to the view.
10035 Select another plane to orient.
10036 Select a plane in the model to orient with respect to the view.
10037 Select a placement position for the view.
10038 Please select a planar face.
10039 Options
10040 The features indicated in the FeatureManager design tree reported errors during this rebuild. \nSelect the affected features and use "What's Wrong" under the right mouse button for a description of the errors.\n\nDo you want to view all errors now?
10041 No active geometry view.
10042 SolidWorks 97 Beta1
10043 Label Edit\nRename
10044 None of the selected entities could be deleted
10045 Entities which do not belong to the active sketch cannot be deleted.
10046 Some of the selected entities cannot be deleted.
10047 Restoring an assembly *.x_t or *.x_b file will create a new \nassembly as specified below. Also, new part and \nassembly files will be created in that directory.
10048 Light Sources
10049 Select the model edge to which the grid should be aligned.
10050 Document cannot be saved with an empty sketch with children.
10051 Cannot locate end of feature.
10052 Extruded feature failed due to geometric conditions.
10053 Select a base face.
10054 One or more models referenced by this drawing have rebuild errors.\nThe errors are indicated in the FeatureManager design tree of \nthe model.
10055 under
10056 has rebuild errors
10057
10058 Change Plane
10059 \nReason:\n\n
10060 Select two points in a geometry view.
10061 Translate operation is not allowed for this sketch, because it has a reference to an external point.
10062 Select edges to pattern along.
10063 The Parasolid file could not be imported. Invalid geometry was found. Only solid and/or surface geometry is expected.
10064 SolidWorks 97Plus
10065 ImportedPart
10066 Select edge to chamfer.
10067 Select part to be used as a base part.
10068 ImportedAssem
10069 Sorry, your document contains no eligible components.
10070 You cannot use the current part as a base part. Please try again.
10071 Boss-Sweep
10072 Error in copy. Cannot open file.
10073 Boss-Loft
10074 Model Dimension
10075 The model has not changed.
10076 This model will become the latest version.
10077 This model has not changed, but the saved version is newer\nSaving the model will overwrite the new version.
10078 Both this version and the saved version have changed.\nSaving the document will overwrite the changes in the currently saved version.
10079 Reference Dimension
10080 Hole Callout
10081 Balloon
10082 Model Dimensions
10083 Select a single feature for rollback. Try again.
10084 Not Implemented.
10085 Part not evaluated. Cannot complete.
10086 Reference Dimensions
10087 Failed to open file.
10088 Failed to save file.
10089 Environment variable 'temp' must be set to a temp directory.
10090 Too many dimensions. Only the first 6 will be displayed.
10091 Failed to read section %1.
10092 Notes
10093 Weld Symbols
10094 Datum Feature Symbols
10095 Failure to shell the body due to geometric condition.
10096 Draft base face is no longer in model. Delete the draft and recreate it.
10097 Some faces selected for this feature are not found. This could be a result of a change in the model. Please edit the feature and reselect the faces.
10098 Could not rebuild draft.
10099 Some filleted items are no longer in the model. You can reselect the items using the Edit Definition in the FeatureManager design tree.
10100 Could not rebuild fillet.
10101 Some chamfered items are no longer in the model. You can reselect the items using the Edit Definition in the FeatureManager design tree.
10102 Could not build chamfer due to geometry conditions.
10103 Hole face is no longer in model. Delete the hole and recreate it.
10104 Sketch
10105 Datum Targets
10106 Surface Finish Symbols
10107 GTOLs
10108 Cannot initialize Embedded Basic.
10109 Hole Callouts
10110 Unknown internal compiler error.
10111 Entry point error %d.
10112 Could not execute compiled code. Error %d.
10113 Run time error %d found at line # %d.
10114 Could not open macro file
10115 Center Marks
10116 Revolution failed to complete.
10117 Balloons
10118 Core modeler says: \n
10119 The Parasolid file could not be created due to invalid model geometry. Only solid geometry can be exported.
10120 Distance is: %.4lf
10121 %.3lf
10122 Backup %1of
10123 You have selected a drawing document.\nOnly parts and assemblies can be viewed in drawings.
10124 This item has associated dimensions, which will be deleted when the trim is completed. Do you want to continue?
10125 Document %1 cannot be found. Please verify that the file exists and is in the specified directory.
10126 General
10127 Properties
10128 Dimensions
10129 Notes
10130 Geometric Tolerances
10131 Welds
10132 Surface Finish Symbols
10133 Datum Feature Symbols
10134 Targets
10135 SolidWorks 97Plus Beta
10136 Selected silhouette cannot be uniquely identified for the current operations. Please create a split line by using Split Line operation with the Silhouette option.
10137 SolidWorks 97 Plus has detected balloon notes in the present drawing.\n\nIf you want the balloon notes to automatically update with the component number, press YES.\nIf you want to keep your balloon notes as displayed in SolidWorks97, press NO.
10138 Normal Distance: %1\n
10145 Base part can only be inserted in an empty part.
10147 Fillet
10148 VarFillet
10149 Chamfer
10150 Hole
10151 Imported
10153 LPattern
10154 Shell
10155 Draft
10156 Boss-Revolve
10157 Cut-Extrude
10158 Boss-Extrude
10159 Stock
10160 Select model to display in drawing.
10161 -
10162 Sheet
10174 Edit Sketch
10177 Could not find end face for feature.
10178 Select a face.
10179 Select a face to complete the specification.
10180 Section
10181 Could not find start face for feature.
10182 The element is used by another dimension or element. Cannot delete it.
10183 Unable to make feature as specified.
10184 Geometric relations prevent dragging of this element.
10185 Failed to create toolbar.
10186 Select
10187 Equation already exists in the system.
10189 Loop for fillet/chamfer does not exist.
10190 Face for fillet/chamfer does not exist.
10191 No items selected.
10192 Failed to create fillet due to geometry conditions.
10193 Edge for fillet/chamfer does not exist.
10194 Need to select a plane and a linear edge to insert a plane at an angle.
10195 The selected view was not updated.
10198 Please enter a number between %1 and %2
10199 MateOn
10200 Align
10201 MateDim
10202 Angle
10203 MateAxis
10204 MateOffset
10206 The feature references are not preserved, please update.
10207 Select one or two elements and then text location.
10208 Too many items are selected. Select one or two items.
10209 Named View has not been created. The name entered is either invalid or the name already exists.
10210 Cannot create a hole on a non-planar face.
10211 In the Edit Part state you can only select elements \nfrom the edited part.\nTo create reference dimensions between different parts\nuse the Edit Assembly state.
10213 Equation entered is invalid
10214 No draft faces were found.
10215 Draft angle must be between -89 and +89 degrees.
10217 The underlying surface is not inclined. Cannot create auxiliary view.
10218 This selection is invalid for an auxiliary view.
10220 The selected view name is a system view and cannot be deleted.
10222 Dimension selected is for reference only. Its value cannot be changed.
10223 Could not create reference dimension from current set of selected items.
10224 Missing edge/axis to define direction in pattern.
10225 Cannot define pattern direction when edge is not linear.
10226 Cannot create pattern for the selected feature
10227 Select an angular dimension or a linear edge as an axis to define pattern.
10228 Select a linear dimension or linear edge to define pattern
10229 CirPattern
10230 A spline cannot be created using the specified point. This point may be coincident with another existing point.
10330 Operation creates zero thickness geometry.\nValid solid cannot be created.
10331 Axis of revolution is invalid or there are multiple ambiguous centerlines.
10332 The resulting model is empty.
10333 Sketch entity offset regeneration failed.
10334 This parameter belongs to another model. Cannot use it.
10335 The last operation produced invalid sketch geometry. Restoring previous sketch state.
10336 Cannot dimension between the same two points.
10337 Cannot dimension between concentric arcs.
10338 Cannot dimension between an arc and the arc's center.
10339 Faces Selected
10340 Shell Feature
10341 Edges Selected
10342 Loops Selected
10343 Chamfer Feature
10344 The vertex to define the plane no longer exists.
10345 SolidWorks 95 Beta
10346 The selected points do not define a plane.
10347 The line to define the plane no longer exists.
10348 Hole Wizard - Step 1 of 3
10349 The vertex to define the axis no longer exists.
10350 Could not find face or plane.
10351 Could not fillet or chamfer a face with no edge.
10352 Disjoint feature.
10353 Zero length of a sketch element is detected.
10354 Failed to merge bodies.
10355 Operation will create self-intersecting geometry.
10356 The following documents will be converted when saved:\n\n
10357 SolidWorks 95 Beta2
10358 SolidWorks 95
10359 Unsupported file version.
10360 Adjacent loft sections cannot lie on the same plane.
10361 Sketch end points, centerpoints, and spline points cannot be deleted.
10362 Failed to create object.
10363 There are no lines/arcs with equal length or radii.
10364 All loft sections must have the same number of curve segments.
10365 Drag and drop failed.
10366 Cannot create a drawing view from a model which has never been saved. Please save the model and try again.
10367 The revolution contour cannot cross the centerline or touch it in an isolated point.
10368 To make a sweep a section and a path must be provided. The section is required to have exactly one contour profile. To make a solid sweep, the contour must be closed. \n
10369 The sweep section is invalid. The section is required to have exactly one contour profile. To make a solid sweep, the contour must be closed.
10370 At least two (three) sketches are required to make an open (closed) loft. To make a body (surface), sketches are required to be closed (open).
10371 Must select a part. A drawing or assembly cannot be used as a base part. Please try again.
10372 Face Selected
10373 Cannot drop a model into a part.
10374 Cannot insert this component because it would cause a circular reference.
10375 Cannot insert an unsaved model into this document. Would you like to save now?
10376 This operation requires selecting:\n for offset of model edges\n -one or more connected model edges\n -one model face\n -one model face and an edge of the face to specify the loop\n for offset of external sketch entities\n -one or more connected sketch entities\n -one entity on a closed contour\n -one external sketch with a closed outer contour
10377 The face selected cannot be perpendicular to the sketch plane.
10378 Selected face is not valid for this operation.
10379 One or more of the selected entities cannot be projected into a valid entities in the sketch plane.
10380 Cannot offset disjoint geometry.
10381 Cannot offset the selected entities, the specified offset dimension is too big.
10382 Assembly components DO NOT interfere with one another.
10383 The selected sketch element has no geometric relations.
10384 Display/Delete Relations requires a selected sketch point or segment.
10385 Convert Entities requires one or more selected edges or one selected face.
10386 The selected model edge must appear as a line in the sketch plane.
10387 There is no precise conversion of the selected edge into a sketch segment entity.
10388 Unable to create a sketch element from the selected edge.
10389 Please select an endpoint of a sketch segment.
10390 Could not create the symmetric element.
10391 The mirror operation requires a sketch centerline and/or one or more sketch segments.
10392 The mirror operation requires that exactly one centerline is included in the set of selected sketch elements.
10393 Fillet is not implemented between splines.
10394 Cannot fillet. The radius value is too small.
10395 Cannot fillet. The selected elements do not form a corner.
10396 Unsupported file version for SolidWorks 97Plus Viewer.\nPlease use a SolidWorks 97Plus file instead.
10397 Cannot fillet. Specified radius would eliminate one of the elements.
10398 Cannot fillet. The elements are tangent or nearly tangent.
10399 Adding geometry relations requires one to three selected items.
10400 The selected edge, plane, or axis cannot be converted to a line or an arc in the sketch plane.
10401 There must be at least one sketch element selected.
10402 This operation requires a valid sketch.
10403 At least one of the items selected must be an entity in the sketch being edited.
10404 Cannot open a part file as an assembly.
10405 There is no valid relation for the selected entities.
10406 The selected entity cannot be extended or is already coincident to the other entity.
10407 Cannot extend the element any further.
10408 Cannot trim the element any further.
10409 Trim/Extend is not implemented for this item.
10410 Valid combinations for parallel relations are : line-line.
10411 The tangent spline and line or arc must be connected at one end.
10412 Two-sided tangency is not yet implemented.
10413 Conflict with existing tangency relation on the spline.
10414 Document cannot be converted\n\n from version: %1\n to version: %2
10415 Cannot convert files saved prior to SolidWorks 95.
10416 Cut-Loft
10417 The selected model edge must appear as a circular arc in the sketch plane.
10418 Valid combinations for concentric relations are: arc-arc, arc-point.
10419 There must be two entities selected.
10420 The geometry relations operations require one sketch item and one model edge, axis or plane, or two sketch elements.
10421 Unable to add the specified geometry relations between the two selected elements.
10422 Valid combinations for coincident relations are: point-point,\n point-line,point-line, point-arc, point-spline, line-line, and arc-arc
10423 Valid combinations for perpendicular relations are: line-line.
10424 Sketch has inconsistencies.
10425 Cannot use non-planar face.
10426 Component(s) have been modified. Updating assembly.
10427 Offset will create self-intersecting geometry. Offset thickness may be too large.
10428 User points cannot be created at the same location as an already existing internal or user point.
10429 User points cannot be dragged to the same location as an already existing internal or user point.
10430 A revolution sketch should contain a single closed non-self-intersecting contour\nand either a single centerline or one that is currently selected.\n
10431 Mirror
10432 Assembly Mating Relation.
10433 Drawing View
10434 Gtol
10435 Note
10436 Layout
10437 Axis
10438 Curve
10439 Plane
10440 Point
10441 Fillet Feature
10442 Failed to read in IGES File.
10443 Failed to read in .DXF or .DWG File.
10444 Regeneration would result in invalid geometry in this sketch. Geometry not updated. Edit sketch to correct.
10445 Dynamic Highlight
10446 Draft Feature
10447 Fully Defined
10448 Under Defined
10449 Over Defined
10450 Invalid Geometry For Tangency
10451 The corner to be filleted has geometry relations which will be deleted if the fillet is created. Do you want to continue?
10452 At least one segment being filleted has a midpoint or equal length relation. Geometry will have to move to satisfy this relation when the fillet is created. Do you want to continue?
10453 Horizontal
10454 Vertical
10455 Perpendicular
10456 Parallel
10457 Coincident
10458 Collinear
10459 Coradial
10460 Concentric
10461 Tangent
10462 Equal radius/length
10463 Midpoint
10464 Intersection
10465 Symmetric
10466 Fixed
10467 On Edge
10468 Offset Entities
10469 This sketch element cannot be deleted because one of its dimension is referenced by :
10470 Invalid Solution Found
10471 You cannot define two faces to have the same orientation. Please select again.
10472 Operation failed due to geometric condition.
10473 Plane Selected
10474 Vertex Selected
10475 Vertices Selected
10476 Line Selected
10477 Lines Selected
10478 Planes Selected
10479 Need one plane to define the offset plane
10480 Need 3 points to define the plane.
10481 Cannot define a plane. The point and line are collinear
10482 Need a line and a point to define the plane.
10483 Need a plane and a point to define the plane.
10484 The elements selected are not a valid combination for horizontal or vertical dimensions.
10485 Failed to create a dimension.
10486 Cut-Revolve
10487 Cut-Sweep
10488 The neutral plane/face does not exist. Please select a new nutral plane to redefine the draft.
10489 Two or more components of the assembly interfere/intersect.
10490 One of the components of this assembly is in rollback state. The assembly is inaccessible now.
10491 One of the components of the assembly is in rollback state. Cannot add now.
10492 The part is in rollback state. Cannot add now.
10493 Error in creating sheet from parameter curves
10494 No matching edges found in sheets
10495 Cannot knit sheets together.
10496 Knitting of sheets is incomplete.
10497 Satisfied
10498 Over Defining
10499 Dangling
10500 The common vertex of two blending edges is too complex. Try to fillet one edge at a time.
10501 Dimension cannot be deleted because it is referenced by:
10502 Mirroring centerline has been deleted. Mirroring is now off.
10503 Please select one edge, or one temporary axis, or two points, or two construction planes.
10504 One of the edges of this mate is suppressed, invalid, or no longer there.
10505 One of the faces of this mate is suppressed, invalid, or no longer there.
10506 Could not find the edge associated with this attribute
10507 Days
10508 The character '@' cannot be used in dimension's name.
10509 Cannot open %1.
10510 File does not contain an assembly. Only assembly files can use the .asm extension.
10511 File does not contain a drawing. Only drawing files can use the .drw extension.
10512 SKETCH MODE
10513 The registration code entered is not valid. Please try again.
10514 The application serial number could not be found. It is assumed that the application is not registered.
10515 MODEL MODE
10516 The sketch is over defined. Consider deleting some over defining dimensions or relations.
10517 Solving the sketch would result in invalid geometry (such as a zero length line). Therefore the sketch has not been updated. Consider :\n o Deleting the invalid geometry.\n o Changing relations or dimensions to eliminate the invalid geometry.
10518 The sketch is no longer over defined.
10519 The sketch can now find a solution with valid geometry.
10520 Display Relations
10521 Document cannot be saved with an empty sketch.\n\nDo you want to delete the empty sketch and continue saving?
10522 Empty sketches not allowed for a feature. Recreate sketch or choose undo to restore.
10523 The current model will not be automatically replaced by the new one because of active references.
10524 The selected item is tangent to a spline. This tangent relation will be deleted when the trim is completed. Do you want to continue?
10525 Base-Extrude
10526 Base-Loft
10527 Base-Revolve
10528 Base-Sweep
10529 &Base
10530 &Boss
10531 &DeveloperTools
10532 Dragging a sketch is not allowed here.
10533 Continue recording?
10534 The part geometry is not valid for this type of save operation. The file was not saved.
10535 The endpoints of two or more unconnected segments have become coincident. The points must be merged if the segments are used in a feature operation. Do you want to merge the points?
10536 Cannot Insert Axis: The selected edge must be linear.
10537 Drawings cannot be inserted into assemblies. Please select a part or assembly.
10538 The sketch segment being trimmed has a midpoint or equal length relation. Trimming the segment will delete the relation. Do you want to continue?
10539 Cannot fillet/chamfer a tangent edge.
10540 An "x_t" file name must be 8 characters or less in length. Please rename your file.
10541 An "x_t" file name cannot have any spaces in it. Please rename the file.
10542 Geometry invalid - no arc created.
10543 Sorry, cannot convert parts that contain lofts or sweeps
10544 Some dimensions are no longer in the model. Missing dimensions will be deleted from drawing.
10545 The file does not contain a part. Error opening file.
10546 Please select three points with SHIFT key down.
10547 A sketch cannot be pasted into an active sketch.\nPlease exit the sketch and try again.
10548 The system could not recognize this file.
10549 SolidWorks had trouble accessing the proper security device. The device may be missing or have invalid information. The application will be terminated immediately.
10550 The sketch cannot be pasted onto a non-planar face.
10551 This feature cannot be selected - it is in a rollback state.
10552 *Normal To
10553 *Front
10554 *Back
10555 *Left
10556 *Right
10557 *Top
10558 *Bottom
10559 *Isometric
10560 You must select from two different components for mating.
10561 You must select from two different sub-assemblies for mating.
10562 Reference axis could not be evaluated, no construction plane created.
10563 Insert Sketch
10564 Edit Sketch
10565 Component
10566 Detail Circle
10567 Unknown
10568 Edge
10569 Face
10570 Geom. Tolerance Symbol
10571 Drawing Note
10572 Section Line
10573 Drawing Sheet
10574 Sketch Item
10575 Vertex
10576 Feature
10577 The first point of the sketch should be at the origin \nto define the center of the hole.
10578 Cannot use an open or self-intersecting sketch to define a hole.
10579 The sketch is missing the dimension for the radius or depth of the hole.
10580 The sketch is self intersecting or intersects the center line.
10581 Error in index file %1 \n at line %2
10582 This feature cannot be suppressed.
10583 Enter a valid Code to prevent termination.
10584 Your SolidWorks 97Plus license will expire in
10585 Your SolidWorks 97Plus license has expired.
10586 Your SolidWorks 97Plus installation is not valid and will not run. Please attempt to install the product again.
10587 Failed to save .DXF or .DWG file.
10588 Can't &Undo
10589 Cannot insert hole due to geometry condition.
10590 &Record
10591 &Pause
10592 &Resume
10593 Change Dim
10594 Del Constraint
10595 You have not registered this SolidWorks 97Plus application. Please mail or fax your registration information as soon as possible.
10596 The operation could not be completed. Please verify that the application is properly registered.
10597 Mating surface type is not supported.
10598 The feature %1 creates an empty or disjoint body for component %2.\nIgnoring the component in applying the feature.
10599 No mates are allowed after adding assembly features.
10627 One of the models of this drawing is in rollback state. The drawing is inaccessible now.
10628 One of the models of this drawing has been modified. Updating the drawing.
10629 Cannot reorder to a rollback feature
10630 The model is in rollback mode. Do you want to rebuild the rolled back features?
10631 modified by
10632 company
10633 date
10634 status
10635 comment
10636 UNDEFINED
10637 CREATED
10638 MODIFIED
10639 DELETED
10640 â–’
10641 Dimension %1 is driven by equation %2, Cannot change.
10642 Deleting the offset dimension will remove the offset relations from the sketch geometry. Do you want to continue?
10643 %1 has CHANGED! Update
10644 now?
10645 %1 is used in equation %2, Cannot delete.
10646 Processing...
10647 Process complete
10648 IGES may be a lengthy process.\nSolidWorks will be locked during this process.
10649 No entities were selected in the current sketch.
10650 A drawing view was not selected.\nNo entities were copied.
10651 The sketch contains a self-intersecting contour.
10652 The sketch contains a self-intersecting entity.
10653 The sketch contains an entity with unsuitable geometry.
10654 The sketch contains three entities that have a common end.\nThus the sketch is unsuitable for contour extraction.
10655 The sketch has no contour geometry.
10656 The sketch contains an open contour.
10657 The sketch has more than one contour.
10658 The sketch contains a zero length entity.
10659 Rebuild Error
10660 Base-
10661 Extrude
10662 Loft
10663 Revolve
10664 Sweep
10665 Sketches used to create projected curves must have exactly one contour.
10666 Cannot use the selected face's boundary in the sketch; the face is not single-bounded.
10667 Internal error in closing the editor.\nCannot save any changes made during this editor session.
10668 A serious error occured during macro playback.\nPerhaps the macro was not played in the correct context.\nThe system could be in an unstable state now.
10669 Edit the common properties of which type?
10670 Dimension
10671 The line to define the construction plane is no longer in the model. You can reselect the line using the Edit Definition in the FeatureManager design tree.
10672 The file was not saved. Please verify that the name of the file was correct and that there was sufficient disk space to save the file.
10673 Fix
10674 Unfix
10675 SolidWorks 97
10676 Attempt to set an invalid value (%1) for %2.\nWill retain the old value.
10677 Customize
10678 Add
10679 Remove
10680 Add Below
10681 Rename
10682 Auto
10683 At Top
10684 At Bottom
10685 File
10686 View
10687 Insert
10688 Tools
10689 Macros
10690 ------(Separator)------
10691 External Macro
10692 Sheet
10693 Edit Part
10694 Edit Assembly
10695 Open
10696 The data in file may be corrupt or invalid.
10697 Document Preferences (%s)
10698 The tangent face is not a conical face and there is no edge defining the intersection point.
10699 The curve defining the intersection point is missing \nand the axis of the conical face is not on the intersection construction plane.
10700 The tangent surface is not in the model.
10701 Need to select a tangent surface and a plane and/or an edge.
10702 The intersection edge must be on the tangent surface to define the construction plane.
10703 Cannot define construction plane, the intersection plane and the curve do not intersect.
10704 %1 part(s) contained within this assembly cannot be imported. The component will not be added.
10705 Nothing is imported because the imported file contains an assembly without a solid.
10706 Invalid Geometry - No ellipse created
10707 Please select an end point of a sketch segment.
10708 Cannot make the spline proportional because it has relations to its interpolating points; please delete the relation on the point in position %d
10709 Cannot change the behavior of a spline that is symmetrical to another spline; please delete the symmetry relation first.
10710 The chosen name must be unique within the model.
10711 The selected edge must have two distinct end points.
10712 The edge selected cannot be normal to the plane.
10713 Parallel
10714 Perpendicular
10715 Coincident
10716 Could not find the face associated with this attribute
10717 Page Setup
10718 Cannot convert the selected entity into a line or a circular arc.
10719 Selected print margins may result in a clipped image. Do you want the system to correct the margins?
10720 Drawing template not found. Please try again.
10721 Cannot convert the selected entity into a line.
10722 Cannot dimension between an arc and the arc's center.
10723 Saving a part while editing a feature's sketch will require a full rebuild when the part is opened. You can avoid this rebuild by exiting the sketcher now. We highly recommend that you exit the sketcher.\n\n Do you want to exit the sketcher before saving?
10724 Up to next option is ambiguous when the sketch is split by the part.
10725 The end face cannot terminate the extruded feature.
10726 This mate has over defined the assembly. Consider deleting some of the over defining mates.
10727 Temporary axes cannot yet be used for mating or for sketch relations when the axis is not in the same part as the sketch . Please create a permanent axis in the referenced part.
10728 The customization file cannot be read, and is probably corrupted
10729 %1 already exists.\nDo you want to replace it?
10730 No valid design table instance found.
10731 \nLine Properties
10732 \nPoint Properties
10733 \nArc Properties
10734 \nEllipse Properties
10735 \nSpline Properties
10736 Equation %d not evaluated because of following deleted or invalid dimension(s):
10737 Equation %d not evaluated because dimension is Read-Only.
10738 Dimension %1 is Read-Only.
10739 Sorry, this function is not available yet.
10740 Sorry, this function has been obsoleted.
10741 You must select from the component you are editing.
10742 Select New Sketch
10743 %1 is not available for write access. Do you want to make a copy?
10744 The document was not available for write and possibly was being edited in another session when opened. If you attempt to save the document with the original name, you will overwrite any changes made in that session
10745 [Read-Only]
10746 No Sketch Selected
10747 You cannot unfold this view any further.
10748 This sketch contains dimensions or relations to model geometry which no longer exists. Consider :\n o Deleting the dangling sketch entities (shown dashed and in dangling color ).\n o Editing the model to restore the missing model geometry.
10749 Auto Solve Mode Off
10750 Cannot edit a part in the context of an assembly that has not been saved. Please save the assembly and try again.
10751 â–‘
10752 Font:
10753 Height:
10754 %.6g meters, %d points
10755 Effects:
10756 Bold
10757 Italicized
10758 Underlined
10759 StrikeOut
10760 None
10761 An edge to define the direction of the pattern is not found.
10762 Base part not found.
10763 Base part has no solid.
10764 \n\nThere are more. Would you like to see them?
10765 The sketch has more than one open contour.
10766 Could not find the vertex associated with this attribute
10767 Curves
10768 Externally referenced document file %1 was not found. Do you want to find it with the browser?
10769 The internal ID of document %1 does not match the internal ID saved with the referencing document. Select YES to accept this document anyway. Select NO to browse for a replacement model.
10770 <MOD-DIAM>
10771 R
10772 needs updating.\n\nIt has not been rebuilt successfully since the last feature\nchange or an externally referenced model has changed.\n\n Rebuild now?
10773 The sketch has no more open contours.
10774 has not been rebuilt successfully since the last feature change or an externally referenced model has changed.\n\n It is safest to rebuild before saving.\n\n Rebuild now?
10775 Some of the models referenced in this document have been modified.\n\n Save them now?
10776 Tangent
10777 Distance
10778 Edit Assembly Feature Scope
10779 Concentric
10780 Visible Edges
10781 Hidden Edges
10782 Sketch Curves
10783 Detail Circle
10784 Section Line
10785 Dimensions
10786 One of the entities of this mate is suppressed, invalid, or no longer there.
10787 The point to define the construction plane is no longer in the model. You can reselect the point using the Edit Definition in the FeatureManager design tree.
10788 Failed to find closest points.
10789 The number of selected items is not two; cannot measure the distance.
10790 Interference
10791 \nis in rollback mode. Rebuild before save? \n Select "OK" to save the part. Select "Cancel" to stop the operation (part will not be saved).
10792 has update error. Continue to save?
10793 View has dependent section or detail view(s).\nDo you want this view(s) hidden also?
10794 View has dependent section or detail view(s).\nDo you wish to show these as well?
10795 View is a section or a detail view. Its base view is also \nhidden. Do you want to show both?
10796 You cannot rotate or translate a sketch with external references to model geometry.
10797 The '%1' function will be obsoleted in the next release.\nPlease use '%2' instead.
10798 %1 Dimensions have been attached
10799 Baseline Dimension
10800 Horizontal Dimension
10801 Vertical Dimension
10802 Dimension
10803 Error opening template for Bill Of Materials
10804 %1 relations were added to the sketch.
10805 Sketch for helix must be a circle
10806 Cannot create a contour for the helix sketch
10807 Number of turns must be positive
10808 Need exactly two selections.
10809 The assembly must be saved before you can edit a part or add a new part.
10810 Adding new part to the assembly failed.
10811 Configuration already exists or input name is invalid. Invalid characters are the following: \ / : * ? " < > |
10812 Can't delete the active configuration.
10813 Configuration Properties
10814 Please select refplane or planar face before selecting plane mode.
10815 Editing a sub-assembly is not allowed yet.
10816 You must select parts only.
10817 You must select components that will be affected by the assembly feature.
10818 Selection Failed.
10819 Could not save the new part.
10820 Could not load SolidWorks DLL: %1.
10821 Error creating Bill Of Materials.
10822 The Selected Items intersect.\n
10823 Cannot create mate with entities selected.
10824 (f)
10825 Nothing has been changed.
10826 The big component part contains the other selected item.\n\n
10827 min.
10828 max.
10829 MIN
10830 MAX
10831 PiercePoint
10832 Unable to load drawing template.
10833 Unable to create the drawing template file.\nCheck if path is correct or file is read only.
10834 Unable to save drawing template.
10835 Cannot reorder the base feature.
10836 Cannot reorder a feature before a system defined feature.
10837 Some of the models referenced in this document have been modified. If these referenced documents are not saved, any new assembly mates will be invalid when this document is reopened.\n\n Save them now?
10838 A printer is not installed. Use the Print Manager to install a printer.
10839 Origin
10840 Ordinate Dimension
10841 Selected axis is not valid for making a circular pattern of this feature.
10842 Horizontal Ordinate
10843 Vertical Ordinate
10844 Align Ordinate
10845 Change Axis
10846 This command is only valid for part references
10847 Explode
10848 Collapse
10849 Pitch and Revolution
10850 Height and Revolution
10851 Height and Pitch
10852 Please select two non-parallel planes to define the axis.
10853 The conical/cylindrical face to define the axis no longer exists.
10854 Picking sketches in the FeatureManager design tree may cause the loft to fail. If this happens, select the sketches in the geometry window to define the twist of the loft.
10855 Save Macro
10856 Equation is invalid: Tries to set a read only dimension.
10857 Equation is invalid: Please check syntax.
10858 Temporary axes in assembly cannot be used for circular patterns.
10859 Sheet entity(s) cannot be related to model edges/vertices.
10860 Feature has error condition in last update. Edit the feature to correct the condition.
10861 The plane that sketch is based on is missing. Cannot be accessed.
10862 Need to select at least one part to define the cavity.
10863 The cavity part cannot be the same part as the base part.
10870 Cannot create a center mark on an entity other than an arc/circle.
10871 The sketch does not belong to this assembly. Cannot make assembly feature.
10872 One of parameters for the chamfer is out of range.
10873 Select a dimension to toggle the display status (hidden/shown).
10874 Update configuration "%1" with changes made?
10875 Select Silhouette
10876 No face selected for silhouette.
10877 Multiple faces selected for silhouette. Please resolve using Select Other tool.
10878 Suppress features
10879 Edit Part in Assembly
10880 Hidden Line, Edit Part in Assembly
10881 Non Edit Parts in Assembly
10882 Add-In is incompatible with current version of SolidWorks.
10883 Failed to initialize Add-In component.
10884 The angle between two planes is: %1.\n\n
10885 The angle between two lines is: %1.\n\n
10886 The angle between the line and the plane is: %1.\n\n
10887 Display Grid
10888 Delete will ignore features which are not under the current scope.
10889 of
10890 -in-
10891 Editing
10892 Template
10893 Loosening tolerance to %g
10894 Exceeded MAX tolerance; will check for best value.
10895 Checking for best tolerance: current value=%g
10896 Tolerance OK at %g
10897 Tolerance MAX at %g
10898 Cannot loosen tolerance beyond %g
10899 Convergence elusive; assuming best tolerance is %g
10900 Knitting body into solid, pass %g
10901 Unknit edges=%g
10902 Restoring tolerance.
10903 Simplifying geometry.
10904 Merging edges.
10905 Checking body.
10906 Knitting completed.
10907 Knitting has failed; result is NOT a solid body.
10908 Trimmed surfaces processed: %g of %g
10909 Reference Axis
10910 Selected face is not valid to make an axis
10911 Please select a temporary axis to make an axis.
10912 No axis is inserted.
10913 %1 axis
10914 %1 construction planes
10915 %1 construction plane
10916 %1 vertex
10917 %1 vertices
10918 %1 sketch point
10919 %1 sketch points
10920 Cannot align view with selected view. Selected\nview has alignment dependencies on this view.
10921 Select a drawing view to align with.
10922 Thicken
10923 Thicken Feature
10924 Cut-Thicken
10925 Boss-Thicken
10926 Failed to thicken a surface and merge with the workpiece.
10927 Failed to thicken a surface and cut from workpiece.
10928 Cut
10929 Failed to thicken a surface into a valid body. Try a smaller thickness.
10930 Construction Curves
10931 Its chord length is %1.\n\n
10932 The selected face covers the area of %1 square %2.\n\n
10933 The perimeter of the face is %1.\n\n
10934 The length of the selected edge or sketch segment is %1.\n\n
10935 One of parameters of the fillet is out of range.
10936 %s : Line %d, character %d\n%s
10937 %s : Line %d\n%s
10938 Cannot mirror an unsaved part. Please save and try again.
10939 _Mirrored
10940 *Full Sheet
10941 Do you really want to reset all preferences to factory defaults ?
10942 Crosshatch
10943 Minimum distance is: %1.\n\n
10944 Projected onto screen, the length of the connecting line is: %1.\n\n
10945 Need to select a point on the cavity part to define the scaling point.
10946 The selected scaling point must be from the same part as the cavity.
10947 Point Selected
10948 Pick Scaling Point
10949 The Pick Scaling Point option is selected but there is no scaling point selected for
10950 part
10951 Please select a conical/cylindrical face to make an axis.
10952 Please select a temporary axis to make an axis.
10953 Please select two planes to make an axis.
10954 Please select an edge or a sketch segment to make an axis.
10955 Please select two vertices or sketch points to make an axis.
10956 Tangent Edges Removed
10957 Surface(s) Selected
10958 No sweep path selected
10959 Select new sweep path
10960 SurfaceCut
10961 Shading
10962 Wireframe/HLR/Shading
10963 The length of the selected edge is: %1.\n\n
10964 The length of the selected sketch segment is: %1.\n\n
10965 The total length of %1 selected edges is: %2.\n\n
10966 The total length of %1 selected sketch segments is: %2.\n\n
10967 Total number of selected entities is: %1.\n\n
10968 Opening File: %1
10969 You are not editing the top assembly. Cannot add Component now.
10970 The face used to define the project curve is no longer in the model.
10971 Mirror Pattern Feature
10972 Please select a plane to make a mirror pattern
10973 A feature of the mirror pattern no longer exists.
10974 Cavity
10975 Please select contiguous faces.
10976 Could not find an edge needed to construct the feature
10977 The configuration used in view "%1" was not found. Please choose another configuration.
10978 Please select at least a seed feature to make a pattern.
10979 Please select edges instead of dimensions for the pattern, because there are more than one seed features.
10980 Changing end conditions will result in a zero length dimension. End conditions not changed.
10981 &Reset All
10982 Choose document to save:
10983 A change to this standard view orientation will change\nthe orientation of named views in drawings of this model.\nDo you want to make this change?
10984 Reset all standard views to default settings?
10985 Custom Header
10986 Custom Footer
10987 ,
10988 &[
10989 ]
10990 <None>
10991 pagenum
10992 pages
10993 date
10994 time
10995 file
10996 ?
10997 1
10998 <filename>
10999 Page &[pagenum]
11000 Page &[pagenum] of &[pages]
11001 &[file]
11002 &[date]
11003 The sketch for this feature must belong to the model you are editing.
11004 The face for the hole must be in the model you are editing.
11005 Select one or more edges/vertices and then a text location.
11006 Select one or two edges/vertices and then a text location.
11007 Select an edge/vertex and then a text location.
11008 The sketch has both open and closed contours.
11009 The sketch has intersecting contours.
11010 The sketch contains disjoint contours.
11011 Warning
11012 ->
11013 Chain selection of sketch lines forms a closed boundary.\nCannot create a section line with a closed contour.
11014 Chain selection of sketch lines has intersecting lines.\nCannot create a section line with intersections.
11015 Please select components to check interference.
11016 Need to select a planar face to mirror the solid in the part.
11017 A document named "%1" is already opened. Do you want to show this already opened document?
11018 Boss-Mirror
11019 The plane used to mirror the solid is no longer in the model.
11020 Cannot use a non-planar surface to mirror the solid.
11021 Model has changed, updating drawing.
11022 One or more mates in SolidWorks 95 assembly "%1" were not converted due to an unresolvable part reference. The mate(s) will be deleted from the assembly. If you wish to recover the mate(s), close the assembly without saving. Open the part and correct any errors. Then, re-open the assembly.
11023 Default
11024 %1 sketch segment
11025 Only planar and cylindrical faces can be used for mating.
11026 Only linear edges and sketch lines can be used for mating.
11027 Helix
11028 SolidWorks 96 (2)
11029 Hide View
11030 Show View
11031 Please select feature(s) to make a mirror pattern.
11032 Features
11033 Failed to generate 3d curve with valid geometry
11034 The interpolating spline will lose all its relations and will be converted into a fixed shape spline when trimmed. Trim anyway?
11035 One of the selected items is a fixed shape spline; currently no relations are available for a fixed shape spline.
11036 Please select feature(s) to make a pattern.
11037 Some features for the pattern do not exist any more.You can reselect features using the Edit Definition in the FeatureManager design tree.
11038 No surface selected.
11039 The Design Table generated the following Configurations:\n\n
11040 You will need to exit and restart SolidWorks for the new setting to take effect.
11041 Making a construction axis by a temporary axis of other part in the context of an assembly is not implemented yet.
11042 %1 planes
11043 One vertex cannot be uniquely identified.
11044 The conical/cylindrical face to define the axis is not conical/cylindrical any more.
11045 assembly
11046 component part
11047 component assembly
11048 Configure
11049 -------(Separator)-------
11050 Curves Selected
11051 Curve Selected
11052 Float
11053 A section or detail view refers to a view\nthat has been deleted. This view will be deleted.
11054 InContextFeature
11055 in
11056 Update
11057 Template cannot be loaded. Please contact Customer\nSupport to recover and continue using this drawing template.
11058 No base body for this feature to work on.
11059 Maximum zoom not allowed under Windows95 due to system \nlimitations. This problem does not exist on Windows NT.\nYou may override this behavior with some performance\ndegradation in non-shaded modes by checking\n"Enable clipping for zoom limitation" in Options,\nPerformance tab.
11060 reference is not resolved
11061 An aligned section can only be generated\nfrom a section line with two segments.
11062 <Exploded>
11063 NO
11064 R
11065 Break Line
11066 This drawing view contains a break. Another cannot be added.
11067 The sketch for extrusion reference surfaces can have only one contour.
11068 Select a New Sketching Plane
11069 Select a vertex to complete the specification.
11070 Select a vertex.
11071 MateGroup
11072 Mating is only allowed to assembly features ( planes, axes, and sketches ) contained in the assembly layout.
11073 Extrude Feature
11074 Thin Feature
11075 Extrude Cut Feature
11076 Revolve Feature
11077 Revolve Cut Feature
11078 Hole Feature
11079 Split Line
11080 The pull direction of the split line is invalid.
11081 The faces to be split are no longer in the model. Use edit definition to re-select the faces.
11082 Some faces to be splitted are missing, some split lines not generated.
11083 Failed to create split line due to geometric condition.
11084 This view has dimensions which cannot be displayed \nproperly when the view is broken. Do you want to delete these\ndimensions (if no, the dimensions will be hidden)?
11085 Any Item
11086 Faces
11087 Edges
11088 Axes
11089 Planes
11090 Custom
11091 The open profile is only suitable for thin feature.
11092 Split Line Feature
11093 Extrude Thin Feature
11094 Extrude Cut Thin Feature
11095 Revolve Thin Feature
11096 Cut-Revolve-Thin
11097 Revolve-Thin
11098 Boss-Revolve-Thin
11099 Boss-Extrude-Thin
11100 Extrude-Thin
11101 Cut-Extrude-Thin
11102 Need to select a plane, a line or 2 points to define the draw direction.
11103 Need to select curve faces to create silhouette split line.
11104 LibFeat
11105 Operation not allowed for the library feature.
11106 Library Feature
11107 File cannot be loaded. Known bad version of DEV (%d).
11108 The assembly must be saved for this operation. Would you like to save now?
11109 Unable to create a thin feature in the specified direction. Try a smaller thickness.
11110 Document %1 is opened for read-only access but is available for write access. Select "Yes" to open it for write access. Select "No" to abort the current operation.
11111 Document %1 is opened for read-only access and has been changed by another user. Reload the document reflecting these changes using "File Reload" and try the operation again.
11112 Document %1 is opened for write access by %2. You must obtain write access to this document to complete the operation.
11113 Document %1 is opened for read-only access and is not available for write access. You must obtain write access to this document to complete the operation.
11114 [Not Found]
11115 Failed to draft the extruded reference surface.
11116 Cannot find start edge for feature.
11117 A revolution sketch should contain a single closed/open non-self-intersecting contour\nand either a single centerline or one that is currently selected.\n
11118 Documents
11119 Library Features
11120 Drawing Templates
11121 derived
11122 Underive
11123 You cannot derive a sketch from an already derived sketch.
11124 Sketches can only be derived from a sketch which exists in the same model.
11125 The sketch being deleted has other sketches derived from it. They will be "underived" when this sketch is deleted. Do you still want to delete this sketch?
11126 Sketch entities cannot be deleted from a derived sketch. If you wish to edit the shape of the sketch, underive it first.
11127 You are going to remove all selected references.
11128 Please select a linear edge as an axis for the circular pattern.
11129 %d fault found in body, error code %d, fault entity %d nodeId %d
11130 %d fault found in face, error code %d
11131 The faces at fault are highlighted.
11132 The edges at fault are highlighted.
11133 A revolution sketch should contain a single closed/open non-self-intersecting contour\nand either a single centerline or one that is currently selected.\n
11134 Wall Thickness:
11135 Direction 2 Thickness:
11136 Loft Surface
11137 The interpolating spline will be converted into a fixed shape spline when trimmed. Trim anyway?
11138 The faces and edges at fault are highlighted.
11139 is corrupted. You can use the verification on rebuild option in the Options menu and do a force rebuild to find the error. Continue to save?
11140 pick a face to check face or have nothing picked to check body
11141 Cannot make a drawing of a library feature part.
11142 Sweep Surface
11143 Named View
11144 Section View
11145 Detail View
11146 Auxiliary View
11147 Projection View
11148 Relative To Model
11149 Standard View
11150 Snap Angle
11151 Snap To Grid
11152 Some offset items are no longer in the model. You can reselect the items using the Edit Definition in the FeatureManager design tree.
11153 Please select a face or a surface to offset.
11154 The offset surfaces are not connected.
11155 Reference surface selected
11156 Offset Surface
11157 face or surface selected
11158 Failed to offset the selected surface; Please try a smaller offset distance.
11159 Value is too big, try a smaller thickness.
11160 Value is too big for direction 1, try a smaller thickness.
11161 Value is too big for direction 2, try a smaller thickness.
11162 Loading...
11163 Updating...
11164 Demo Version
11165 Objects cannot be saved when running a demo version of SolidWorks.
11166 There should be only one open profile in the sketch.
11167 Revolve Cut Thin Feature
11168 The current model will not be automatically replaced because of in-context references from within. WARNING: the in-context references are not defined in the new copy.
11169 Need to select a sketch to project onto faces to create edges.
11170 Need to select one or more faces to create edges.
11171 Entity
11172 Surface
11173 Projecting the sketch along the specified direction does not intersect the faces.
11174 Failed to project the sketch to create edges.
11175 Cannot create edge which does not split a face.
11176 Previous
11177 This SolidWorks 97 Demo Version will expire in %1 days.
11178 This SolidWorks 97 Demo Version has expired.
11179 Revolving Reference Surface
11180 A revolution surface sketch should contain a single non-self-intersecting contour\nand either a single centerline or one that is currently selected.\n
11181 Sum of angles must be between 0.00 to 360 degrees.
11182 Suppressed
11183 The sketch will become over defined or will not be able to find a solution if this dimension is added. Do you want to make it a driven dimension?
11184 Inactive Entities
11186 Its diameter is %1.\n\n
11187 Its radius is %1.\n\n
11188 The length of the normal component of the connecting line is: %1.\n\n
11189 Projected onto selected planar object, the length of the connecting line is: %1.\n\n
11190 Projected onto selected linear object, the length of the connecting line is: %1.\n\n
11191 Can't overwrite document %1. It is a "Read-Only" document or is currently in use.
11192 :
11193 Scale
11194 %d : %d
11195 The sweep path is self-intersecting.
11196 Loop
11197 Datum Tag
11198 View Label
11199 Detail
11200 The sketch cannot be dragged because Auto Solve Mode is off.\nTo drag the sketch, please turn Auto Solve Mode on.
11201 Guide curve no. %d is invalid. It does not intersect with section no. %d.
11202 closed contour
11203 single segment
11204 This selection refers to:
11205 One of the models referenced by this part has been modified. Updating part.
11206 Selected object is not a Library Feature Part.
11207 Library Feature is empty.
11208 Default
11209 The radius of the fillet is too large to fit the surrounding geometry. It may be too large because it can not fit within the face curvature near a filleted edge or because it would eliminate a face adjacent to one of the selected input edges.
11210 The split face must be non-planar to define a silhouette split line.
11211 Current Sketch.
11212 Vertices
11213 Points
11214 Surfaces
11215 Sketch
11216 Sketches
11217 Weld Symbol
11218 Surface Finish Symbol
11219 SketchEntity
11220 Profile
11221 Body
11222 Detail
11223 GeometricTolerance
11224 Dimension
11225 Cosmetic Thread
11226 Edge selected does not belong to a cylindrical face.
11227 This part has references in the context of another assembly named, <%1>. Do you want to substitute the earlier reference with this assembly ?
11228 Adding the part into this assembly would create conflict of references. Cannot add.
11229 Neutral Plane
11230 Faces to Draft
11231 Parting Lines
11232 Direction of Pull
11233 Need to select at least one part to define the join.
11234 The join part cannot be the same part as the base part.
11235 Join
11236 ComponentArray
11237 Need to first edit a part to select it as the base part for the join operation.
11238 Converting this part needs the context assembly to be loaded first.
11239 Faces must belong to the same body.
11240 The draft direction is not defined.
11241 Changing model dimensions from drawings is disabled.
11242 %1 could not be checked out.
11243 Unable to create a neutral surface.
11244 Face1 must be an offset of face2 for neutral surface creation.
11245 MidSurface
11246 Unable to find a pair of faces to create neutral surfaces.
11247 Unable to trim neutral surfaces.
11248 Placement factor of mid-surface must be between 1.0 and -1.0
11249 Some reference edge for the draft feature is missing. Edit the feature to re-select the edges.
11250 Ambient
11251 Directional Light 1
11252 Directional Light 2
11253 Directional Light 3
11254 Directional Light 4
11255 Directional Light 5
11256 Directional Light 6
11257 Directional Light 7
11258 Directional Light 8
11259 Spot Light 1
11260 Spot Light 2
11261 Spot Light 3
11262 Spot Light 4
11263 Spot Light 5
11264 Spot Light 6
11265 Spot Light 7
11266 Spot Light 8
11267 Add S&pot
11268 Add Direc&tion
11269 All lights are used already
11270 Loft profiles must be not identical.
11271 Loft guide curves must not be identical.
11272 View Features
11273 View Dependencies
11274 Only single sketch features and fillets with most types of external references are allowed for this operation. You have selected features which are not currently supported.
11275 One or more externally referenced files are incompatible. This may result in some dangling references.
11276 Please select all sketches in order first and then guide curves.
11277 Draft faces cannot be perpendicular to the pull direction.
11278 All Faces
11279 Inner Faces
11280 Outer Faces
11281 One of the circles has a negative radius due to a large taper angle. Consider reducing the taper angle.
11282 The propagation type chosen requires the selection of a planar face to define the neutral plane.
11283 SW97 UI Change: Please use CTRL key instead of SHIFT key to add or remove selections.\n
11284 This file contains bad data. It may have been created prior to Rev2 Beta.
11285 Please select a component to edit first.
11286 Unable to make a revolution with the given profile. Profile may be self intersecting.
11287 Could not initialize OpenGL for this\nwindow. Shading is unavailable.
11288 Only dimensioning between a model entity and a sketch entity is allowed in derived sketches.
11289 %s
11290 %s-%s
11291 %s
11292 %s (%g : %g)
11293 %s SCALE %g : %g
11294 Preview is not available.
11295 Thin feature is not patternable.
11296 You must pre-select a component and an axis, linear edge, or sketch line to rotate the component around.
11297 The rotate tool can only be used on components that have not yet been mated.
11298 Unable to create contour geometry. Check the loft sketch profile.
11299 Finished searching for %1.
11300 One or more file names were invalid or not found.
11301 %1 is being referenced by other open documents. "Save As" will replace these references with the new name. Check "Save As Copy" in the "Save" dialog if you wish to maintain existing references.
11302 Cannot create callout with the selected edge.\nPlease select a circular edge.
11303 Can't edit dependencies of SolidWorks 95 documents. Open the document in SolidWorks 97 and save it before using this feature.
11304 . However, this cannot be done automatically due to dependent features. Consider deleting the mates to the component before adding this one.
11305 . Would you like to move the existing mates and add the new mate?
11306 is currently positioned by existing mates in
11307 . Adding the new mate requires moving the existing mates to
11308 <HOLE-DEPTH>
11309 <HOLE-SPOT>
11310 <HOLE-SINK>
11311 THRU
11316 Boss
11321 Revolution
11324 Pattern
11325 Derived Part
11327 Bend
11330 Reference Curve
11332 Cut-Surface
11335 Select the face or plane on which to position the new part.
11336 The default mate group cannot be deleted.
11337 This mate cannot be added because the geometry selected due to dependent features.
11338 Edit part can only be used on components which are parts.
11343 Select the model edge to which the grid should be aligned. Sketch origin will be placed on the sketching plane at the projection of the end of the edge closest to the pick.
11344 The grid will be aligned to the selected model edge.
11345 The sketch is currently open. A non-thin revolution feature requires a closed sketch. Would you like the sketch to be automatically closed?
11346 The profile could not be closed without self-intersecting.
11347 Not all mandatory references have been selected.
11348 All Others
11349 Section view requires a plane.
11350 Unable to create a section view.
11351 At least two points are needed to define a 3D spline curve.
11352 The 3D spline curve is self-intersecting.
11353 Component Pattern
11354 Weld Bead
11355 Crosshatch Properties...
11356 Instance
11357 All Instances
11358 Part
11359 section plane #
11360 File name entered was invalid, not found, or of an incompatible type.
11361 Library Feature with Base Feature can only be inserted into an empty model.
11362 Region
11363 View
11364 Library Feature cannot be inserted into a Library Feature Part.
11365 Library Feature can be inserted only into a part.
11366 The file cannot be written because it is in use. It may be locked by this application or an external program.
11367 Length: %1\n
11368 Chord Length: %1\n
11369 Radius: %1\n
11370 This part contains the references to Thin Features that are likely to fail or find incorrect reference. Please delete and re-create these references.
11371 Failed to create Rib feature.
11372 To create a rib feature the sketch cannot be closed.
11373 Failed to extend the sketch to make contact with the model.
11374 Identical contours in the same sketch are not allowed for this operation.
11375 Non unique contour created by Offset Entities operation has been deleted from the sketch.
11376 Non unique contour created by Convert Entities operation has been deleted from the sketch.
11377 Cannot select suppressed components. The component must be unsuppressed to use it in this operation.
11378 Failed to create required reference plane. Probably, the part has wrong external context.
11379 WARNING: Returning to the original sketch plane.
11380 Cannot dimension to dangling centermarks.
11381 Can't reload SolidWorks 95 documents. Open the document with write access in SolidWorks 97 and save it before using this feature.
11382 Cannot create incorrect dimension on aligned section.
11383 Library Feature currently can handle only single sketch features\nwith all feature references (except the first feature) within the Library Feature.
11384 Some of the dependent features will also be removed from the Library Feature.
11385 This part has some features defined in the context of another assembly <%1>. You can edit the part here now, but cannot create any external references from the current assembly.
11386 Mating is not supported for one of the two entities. Or one of the components cannot be modified currently.
11387 All documents referenced by a SolidWorks95 assembly MUST be opened for write access for conversion purposes. Select OK to continue this operation.
11388 %1 is not available for write access. It must be made available for write access for conversion purposes.
11389 You must pre-select a sketch, plane or planar face.\n\nPre-selecting a sketch will edit that sketch.\n\nPre-selecting a plane or planar face will insert a new sketch.
11390 This part might contain references to a Split Face Feature that are bound to find incorrect referenced face. Please delete and re-create these references.
11391 The resulting rib did not intersect the existing model. The "Material Direction" setting may have been incorrect.
11392 Failed to draft the rib feature.
11393 You cannot scale a sketch with external references to model geometry or the origin.
11394 Non blind extrusions have been converted to blind.
11395 Solid Feature
11396 Thin Feature
11397 Direction 1
11398 Direction 2
11399 0 Surface Selected
11400 1 Surface Selected
11401 0 Vertex Selected
11402 1 Vertex Selected
11403 Blind
11404 Through All
11405 Up To Next
11406 Up To Vertex
11407 Up To Surface
11408 Offset From Surface
11409 Mid Plane
11410 One-Direction
11411 Two-Direction
11412 Mid-Plane
11413 Dimension selected is a driven dimension. Its value cannot be changed.
11414 Do you really want to set the colors of the current document to the system defaults? \nThe colors of the features will be changed!
11415 Do you really want to set the system default colors to the defaults of the current document?
11416 Selection Filter
11417 SolidWorks97 supports datum feature symbols for both 1982 \nand 1994 versions of ANSI 14.5. Do you want SolidWorks to\nuse the 1994 version by default?
11418 Diameter: %1\n
11419 Copy Surface
11420 Rib
11421 The sketch should have only one open profile. Please edit sketch to fix the profile.
11422 The reference edge is not in the Rib, edit definition to choose another reference edge.
11423 The profile for the rib is self-intersecting when extended. Please edit the sketch to correct the condition.
11424 Unsupported rib type from future version.
11425 One or more components referenced in Join Feature are not available in assembly.
11426 Cannot attach detail items to an edge of a broken view.
11427 Library Feature Part cannot be inserted into assemblies. Please select a part or assembly.
11428 The thickness value must be greater than 0.0.
11429 This part contained the tangency conditions between a spline and another entity that was not adjacent to the spline. Such a tangency is not supported by the modeler and has been deleted.
11430 Area: %1 square %2\n
11431 Perimeter: %1\n
11432 Radius: %1\n
11433 Total Length: %1\n
11434 Distance: %1\n
11435 Projection: %1\n
11436 Normal: %1\n
11437 Angle: %1\n
11438 Constrain All
11439 There must be a selected sketch entity for regenerating the detail circle's contour.\nThe contour will be undefined. Re-edit the detail circles sketch to define it's contour.
11440 There must be a selected sketch entity for regenerating the section line.\nThe section line will be regenerated using its previous sketch segments.
11441 Ellipse Property
11442 Spline Property
11443 Line Property
11444 Arc Property
11445 Document %1 has been modified or converted in this session of SolidWorks 97Plus. Select "OK" to discard changes. Select "Cancel" to abort the current operation.
11446 Arc Length: %1\n
11447 This part contains an sgText entity that was created on an unsupported version. Please discard this part.
11448 There is not enough space on the disk %s\n\nFile size: %d KBytes\nFree space: %d KBytes
11449 Offset Entities operation failed.
11450 Convert Entities operation failed.
11451 A modeler error occurred. However, your part is not damaged. Please report this error to Technical Support.
11452 Join operation failed because components are disjoint.
11453 Join operation failed because it cannot regenerate component %1.
11454 Replacement document must be of the same type as the original one.
11455 An edge belonging to a cylindrical hole or boss was not selected.
11456 Cosmetic Thread
11457 Too many section planes selected. Only the first 20 planes are used.
11458 Please enter any number between %g and %g \nor the value %g.
11459 Document %1, and/or some of its references, has been modified since last saved. Save changes before copying?
11460 Thickness:
11461 Bend Radius (read across)
11462 Opening Angle (read down)
11463 The diameter of the threads is invalid. Please enter a value\nin the range %s to %s.
11464 The selected component is fixed. It cannot be moved.
11465 The selected component is fully defined. It cannot be moved.
11466 The sketch has an open contour where a closed contour is expected or vice versa.
11467 You may now reselect another entity to replace this.
11468 Face must be planar.
11469 Cannot drag this component at this moment.\n
11470 The base feature of this component is defined in the context of this assembly. Dragging is not allowed.\n
11471 Cannot use this selection at this time.
11472 You are not editing the top assembly. Cannot add Component Pattern now.
11473 Cannot create component pattern in the assembly.
11474 You must select a component not the assembly itself to pattern.
11475 The seed component must be different from the pattern feature's component.
11476 The pattern feature's component must be different from any seed component.
11477 You must select components to pattern.
11478 You must select only one pattern feature to derive a component pattern from.
11479 You must select one pattern only.
11480 You must select at least one component to pattern.
11481 Cannot pattern: Component to pattern must be mated with the pattern feature.
11482 Cannot pattern: Could not find proper pattern location.
11483 Invalid Data Selected.
11484 The selected faces need to have a common edge on the base face to propagate to other tangent faces.
11485 Display errors at every rebuild
11486 Cannot add relations to the internal points of fixed shape splines (proportional splines).
11487 Currently only planar and cylindrical faces from external parts/n can be used when creating part features in assembly context.
11488 The profile must be different from the path.
11489 You must select a sketch to sweep.
11490 Selection Failed.
11491 No intersection found for pierce point.
11492 The current date on your computer is unreasonable (much too far in either the past or future).\nPlease correct the date setting then rerun SolidWorks.
11493 Unable to make a revolve feature with the given profile.
11494 The plane to define the axis is no longer in the model.You can reselect the plane using the Edit Definition in the FeatureManager design tree.
11495 The new assembly was not saved.
11496 \nCommon Properties
11497 Common Properties
11498 Please enter a valid detail label. Valid labels\ninclude A-Z, AA-AZ, BA-BZ, and so on.
11499 The two selected items are perpendicular to each other.\n
11500 Diameter: %1\n
11501 Radius: ??\n
11502 The two selected items are parallel.\n
11503 Loft profiles must all be closed or all be open. Mixed case is not allowed.
11504 The profile sections overlap.
11505 The profile sections are either open or self-intersecting.
11506 The start point of the profile sections are not aligned.
11507 Failed to merge the newly generated body with the workpiece.
11508 A section and a path are required when making sweeps. The section must have exactly one contour profile, and must be closed to make a solid sweep.
11509 The section profile sketch for the attempted sweep is open. A closed profile sketch is required for this operation
11510 The section profile for sweep is self-intersecting.
11511 Cannot get a point on the path to start with. The path must intersect with the section plane. For open path, the intersection must occur at end points of the path.
11512 Cannot create a profile for the sweep path.
11513 Dimension value %1 is out of range, old value %2 is restored.
11514 <WLDSI-FLT>
11515 <WLDSI-CNV>
11516 <WLDSI-CNC>
11517 <WLDSA-FLT>
11518 <WLDSA-CNV>
11519 <WLDSA-CNC>
11520 ->?
11521 Out of context
11522 <WELD-FILL>
11523 <AWLD-FILL>
11524 <WLDSA-FFLT>
11525 <WLDSA-FCNV>
11526 <WLDSA-FCNC>
11527 <WLDSI-FFLT>
11528 <WLDSI-FCNV>
11529 <WLDSI-FCNC>
11530 CGHMRU
11533 Weld type is not available.
11534 ASPC
11535 A seed component must be different from the component for direction (edge or dimension).
11536 A component for direction (edge or dimension) must be different from any seed component.
11537 In context
11538 External References For :
11539 Data
11540 Referenced Entity
11541 Feature's Component
11542 Status
11543 This mate cannot be added. One of the components being mated is fixed. The other is either fixed or has time dependent features. Consider unfixing the component(s) or deleting the time dependent features.
11544 Offset
11545 Line
11546 Arc
11547 Ellipse
11548 Spline
11549 Sketch Plane
11550 Base Part
11551 Convert
11552 You must select a direction to pattern along, or the one you have selected is invalid.
11553 A component to pattern must be positioned in the assembly before you can pattern.
11554 Please enter a value greater than %1 and less than %2.
11555 Some of the profiles or guide curves are invalid. Please select again.
11556 Annotations
11557 Vertex is at the opposite direction of extrusion. Try reverse direction.
11558 The part you are editing is not mated or fixed in space. Adding in-context features may produce undesirable results. It is recommended that you position the component before doing so.
11559 Cannot attach a datum feature symbol to a non-planar face.\nPlease select a planar face or a reference plane.
11560 Cannot reorder to a library feature.
11561 Cannot reorder after an assembly component.
11562 Cannot reorder a system defined feature.
11563 Derived
11564 DetailItem
11565 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11566 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11567 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11569 Selected faces do not intersect.
11570 Need to select two top faces.
11573 The selected top faces must come from two different components.
11576 Selected faces from different components must share at least one coincident edge for this weld bead operation.
11577 Cannot find top edges needed to calculate weld bead.
11578 Cannot find bottom edges needed to calculate weld bead.
11579 Cannot calculate end faces of weld bead.
11580 Too many top faces selected.
11586 Select two sets of adjacent contact faces, each set from a different component. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11587 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11588 Select two sets of adjacent contact faces, each set from a different component. The two sets of contact faces must be coincident at some edge. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11589 Select two sets of adjacent contact faces, each set from a different component. The two sets of contact faces must be coincident at some edge. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11590 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11591 Select two sets of adjacent contact faces, each set from a different component. The two sets of contact faces must be coincident at some edge.
11619 Inplace
11620 The Center Of Mass and the Inertia Tensor are output in the coordinate system of %1\n
11621 Principal Axes of Inertia and their Moments:\n
11622 Entities in InPlace mates cannot be replaced.
11623 The line defining the axis is not valid.
11624 Cannot calculate top surface. Weld bead not constructed.
11625 Cannot calculate one or both of the contact surfaces. Weld bead not constructed.
11626 Cannot calculate one or both of the end surfaces. Weld bead not constructed.
11627 Cannot calculate bottom surface. Weld bead not constructed.
11628 Cannot knit calculated surfaces together to construct the weld bead.
11629 Incorrect specification of either stop or contact faces.
11630 The base sketch of the part located by the InPlace mate contains references to other entities in the assembly. These references may update in unexpected ways after this mate is deleted, because the part will no longer be positioned relative to the assembly. Would you like to remove these references now? (No geometry will be deleted.)
11631 another user
11632 Silhouette Edge
11633 Silhouette Edges
11634 Sketch text is not supported in thin feature.
11635 Faces were selected in a manor that would result in circular and non-circular weld bead edges.
11636 Selected faces from different components cannot clash for this weld bead operation.
11637 A derived component part cannot be added back to the assembly it was created from.
11638 Drafting the rib will produce self-intersecting geometry. The draft angle may be too large or the draft direction is wrong or the thickness of the rib is too small.
11639 Select new curves.
11640 Check Entity
11641 Data structure corrupt.
11642 Data Corrupt
11643 Invalid geometry.
11644 Invalid geometry
11645 Self-intersection in geometry
11646 Self-intersection
11647 Degenerate geometry
11648 Degenerate geometry.
11649 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11650 Select two sets of adjacent contact faces, each set from a different component. Select a top face from each component which defines the top and shares an edge with a contact face. Select stop faces which share a common edge with contact faces and which are used to define the front and back edges of the weld bead.
11652 Not Available!
11653 Cannot add a relation to a reference geometry that needs updating.
11654 A sub-assembly feature or sketch cannot be edited in the context of a parent assembly. Open the sub-assembly to perform this operation.
11655 Some of the guide curves for the sweep are invalid.
11656 The parts listed below have features defined in the context of another assembly that is being saved to a new name. If you select OK now, these features will not regenerate in the context of the newly saved assembly. Select Cancel and choose new names for the parts listed whose features you want to update in the context of the new assembly. \n\n
11657 There are parts that have features defined in the context of %1. If you select OK to continue this operation, these features will not update in the context of the newly saved assembly . It is highly recommended that you consider saving new versions of these parts now which will update in the context of this newly saved assembly. To do this, select Cancel, select References from the Save As dialog box, then input new names for those parts that you want to update in the new assembly.\n
11658 New version of %1
11659 The intermediate profile # %d could not be solved. Consider editing the relations and dimensions of the original section sketch.
11660 Cannot generate weld bead because referenced face is not available.
11661 Faces that were referenced by this weld bead are either suppressed or missing. Missing or suppressed faces are not shown in the dialog and will be removed from the bead if the edit definition is successful. Cancel out of the dialog to avoid this or proceed with caution.
11662 Scale
11663 Editing Mate :
11664 Creating New Mate...
11665 Invalid
11669 Cannot add a relation to a reference geometry that needs updating.
11670 A sub-assembly feature or sketch cannot be edited in the context of a parent assembly. Open the sub-assembly to perform this operation.
11671 Some of the guide curves for the sweep are invalid.
11672 The parts listed below have features defined in the context of another assembly that is being saved to a new name. If you select OK now, these features will not regenerate in the context of the newly saved assembly. Select Cancel and choose new names for the parts listed whose features you want to update in the context of the new assembly. \n\n
11673 There are parts that have features defined in the context of %1. If you select OK to continue this operation, these features will not update in the context of the newly saved assembly . It is highly recommended that you consider saving new versions of these parts now which will update in the context of this newly saved assembly. To do this, select Cancel, select References from the Save As dialog box, then input new names for those parts that you want to update in the new assembly.\n
11674 New version of %1
11679 Missing geometry
11681 Cannot add a relation to a reference geometry that needs updating.
11682 A sub-assembly feature or sketch cannot be edited in the context of a parent assembly. Open the sub-assembly to perform this operation.
11683 Some of the guide curves for the sweep are invalid.
11684 Missing geometry.
11685 Vertex is not on curve.
11686 Vertex not on curve
11687 Edge is reversed.
11688 Edge reversed.
11689 SP-curves of edge not within edge tolerance.
11690 EdgeTolerance.
11691 Vertices touch.
11692 Vertices touch.
11693 Faces are incorrectly ordered at edge.
11694 Incorrect faces ordered.
11695 Vertex is not on surface.
11696 Vertex not on surface.
11697 Edge is not on surface.
11698 Edge not on surface.
11699 Edges are incorrectly ordered at vertex.
11700 Incorrect edges ordered.
11701 Missing vertex at surface singularity.
11702 Missing vertex.
11703 General geometry problem.
11704 A general geometry problem was found. Please send the model to SolidWorks Technical Support at support@solidworks.com.
11705 The Indicated face intersects with itself. This could be caused by a sweep loft which doubles back on itself. Edit the corresponding feature to eliminate this condition.
11706 Self-intersecting face.
11709 The indicated face pierces through the solid. This could be caused by a large fillet or chamfer on a thin shell, or by self-intersecting lofted or swept features.
11710 Face-face inconsistent.
11711 The solid is in-side-out. Roll back the model one feature at a time and recheck until the cause is identified.
11712 Body is inside out.
11713 Shells of region are inconsistent.
11714 Shells are inconsistent.
11715 Regions of body are inconsistent.
11716 Regions are inconsistent.
11717 Geometry/topology are inconsistent in shell.
11718 Topology inconsistent.
11719 failure during face=face check.
11720 face check failed.
11721 The indicated edge is shorter then the maximum allowable tolerance. A possible cause is poorly aligned or nearly coincident sketch entities. Carefully inspect the corresponding sketch for these conditions.
11722 Error(s) found.
11723 Short edge.
11724 Please select at least a face for each face set for face-face blending.
11725 Please select only edges for a variable-radius edge fillet.
11726 Please select only faces for face-face blending.
11727 Link values
11728 Unlink value
11729 %d fault(s) found and \n%d short edge(s) found.
11730 Sketch, Not Solved
11731 Sketch, Invalid Geometry
11732 No Solution Found
11733 A solution cannot be determined for this sketch. Consider: \n o Moving the sketch closer to the desired solution by dragging or changing dimension values.\n o Adding more dimensions or relations to further define the sketch.\n o Changing the dimensioning scheme.
11734 The sketch can now find a valid solution.
11735 The assembly cannot be solved with the addition of this mate. Consider :\n o Removing the mate.\n o Moving the assembly closer to the desired solution by dragging or changing dimension values.\n o Adding more mates to further define the assembly.\n o Changing the mating scheme.
11736 Not Solved
11737 Invalid
11738 This mate is over defining the assembly. Consider deleting some of the over defining mates.
11739 This mate cannot be solved. Consider :\n o Deleting this mate.\n o Moving the assembly closer to the desired solution with dragging.\n o Adding more mates to further define the assembly.\n o Changing the mating scheme.
11740 AddIns
11741 is already loaded
11742 cannot be loaded. Either the Add-in or one of its components is missing
11743 <WELD-JSPT>
11744 <WELD-JSM>
11745 Selected contact faces must come from two components.
11746 Please use one surface only.
11747 This operation cannot be performed while the first mategroup is rolled back.
11748 Tangent Edges
11749 Hidden Tangent Edges
11750 Tangent Edges Visible
11751 Tangent Edges With Font
11752 gram/mm^3
11753 gram/cm^3
11754 kg/m^3
11755 lb/ft^3
11756 lb/in^3
11757 gram per cubic millimeter
11758 gram per cubic centimeter
11759 kilogram per cubic meter
11760 pound per cubic foot
11761 pound per cubic inch
11762 grams per cubic millimeter
11763 gram per cubic centimeter
11764 kilograms per cubic meter
11765 pounds per cubic foot
11766 pounds per cubic inch
11767 mm
11768 m
11769 cm
11770 ft
11771 '
11772 in
11773 "
11774 millimeter
11775 centimeter
11776 meter
11777 foot
11778 inch
11779 millimeters
11780 centimeters
11781 meters
11782 feet
11783 inches
11784 deg
11785 â–‘
11786 rad
11787 min
11788 '
11789 sec
11790 "
11791 degree
11792 radian
11793 degree-minute
11794 degree-minute-second
11795 degrees
11796 radians
11797 degrees-minutes
11798 degrees-minutes-seconds
11799 Cannot calculate top or bottom weld bead surface because contact faces are parallel.
11800 Guide curve #%d does not have a pierce constraint with the sweep sketch.
11801 Sorry, selected dimensions cannot be linked.
11802 Shared parameter could not be created.
11803 Cannot link incompatible dimension types.
11804 Unexploded
11805 Could not find any surfaces to extrude up to. If you have a particular surface in mind, please edit definition of this feature, select Up To Surface option and pick that surface.
11806 Name:
11807 Type:
11808 Not a named view
11809 Failed to access %1 printer. Using default printer instead...
11810 Automatic solving is being turned off for the active sketch or sheet because it is very large. You can turn it back on if desired. Dragging sketch items is disabled while automatic solving is off.
11811 **Invalid**
11812 Path for Hyperlink is invalid
11813 Woodruff
11814 SolidWorks 97
11815 Cannot create more than one base extrusion feature in a part.
11816 Number
11817 Equation
11818 *Trimetric
11819 *Dimetric
11820 Cannot create circular weld beads between two uneven sets of contact faces. For circular weld beads each vertex found in one component is matched with one found in the other component.
11821 No write access for this macro file. Cannot save changes.
11822 Insufficient memory to create the debugger.
11823 Unable to create the debugger window.
11824 Unable to load debugger libraries.
11825 Cannot reorder a feature which is used in another feature.
11826 Warning: drop will remove some dimensions of this feature. Do you want to continue?
11827 Thread diameter is not valid. Please enter a\nvalue between %s and %s.
11828 At least two adjacent points are identical or too close.
11829 Edge Fillet Items
11830 Vertex List
11831 Face Set 1
11832 Face Set 2
11833 Variable Radius
11834 Constant Radius
11835 Face Blend
11836 The feature failed to cut the body.
11837 Part of the feature failed to cut the body.
11838 Both face lists need at least one face.
11839 Select one row at a time.
11840 Highlight the whole row.
11841 Please select a help point for the face blend.
11842 The point to define the help point is not valid.
11843 Please try a larger blend radius.
11844 Please try a smaller blend radius.
11845 During geometry integrity checking this feature is found to create corrupted geometry.
11846 The sketch contains a doubly nested contour.
11847 is missing
11848 Simplified
11849 The path for sweep with guide curves needs to be tangent.
11850 Select a face or refSurface to check.
11851 Cannot use absorbed surface.
11852 Explode Step
11853 To make this option valid, the sweep must have a path.
11854 To make this option valid, the sweep must have a path and at least one guide curve.
11855 To make this option valid, the sweep must have at least two guide curves.
11856 The sketch is suppressed. Please unsuppress the sketch before editing it.
11857 An adjacent face cannot be extended to stay in contact with the fillet surface.
11858 The points cannot be merged.
11859 The internal ID of document %1, which is already open, does not match the internal ID saved with the referencing document. Select YES to accept this document anyway.
11860 A document named "%1" is already opened. Please choose a different name.
11861 Suppressed features cannot be patterned.
11862 Thickness
11863 This drawing view contains True dimensions. Switching to\nProjected dimensions will delete these previously created\ndimensions.\n\nDo you still want to switch to Projected dimensioning\nmode for this view?
11864 This drawing view contains Projected dimensions. Switching to\nTrue dimensions will delete these previously created\ndimensions.\n\nDo you still want to switch to True dimensioning\nmode for this view?
11865 Please first select a section plane from the "Section Planes" box.
11866 There are no valid geometry in the reference surface.
11867 The resulting surface is self-intersecting.
11868 Unable to edit an imported object which has parent/child relationship or is being referenced.
11869 Edit Definition of this imported object is not supported.
11870 Please enter a valid name for the parameter.
11871 <View Not Available>
11872 The view orientation of this drawing view has been changed.\nAll existing dimensions will be deleted. Do you still want to\nchange the name of the drawing view's orientation?
11873 Dimension value is already linked elsewhere.
11874 Dimension is a read only, driven or a reference dimension which cannot be linked.
11875 Incompatible range of values make these dimensions unlinkable.
11876 Dimension's value is driven by an equation.
11877 Ignored
11878 TRUE R
11879 The view orientation of this drawing view has been changed.\nAll existing dimensions will be deleted and dependent drawing\nviews will be affected. Do you still want to change the drawing\nview's orientation?
11880 Import of this type is not supported . Please check file extension.
11881 Sectioning at this position will produce invalid bodies. Please select a different section position.
11882 Cannot reorder feature %s after feature %s. %s is not in the model.
11883 New Exploded View...
11884 A face has no valid bounding box.
11885 Please enter a number greater or equal to %1 and less than or equal to %2
11886 Selected object is already owned by a feature.
11887 Selected object is already owned by a feature.
11888 %s: Incorrect owner for the profile curve.
11889 Incorrect owner for the profile curve.
11890 Thin features cannot have more than one closed or open profile curve.
11891 * Includes the mass properties of %1 hidden components.\n\n
11892 * Includes the mass properties of one hidden component.\n\n
11893 Active Part Only
11894 The plane which is used to define this construction plane is not found.
11895 Assembly features do not handle multiple contours in a sketch. Only the first contour will be used in creating the feature.
11896 Only one exploded view can be created per configuration.
11897 There are no explode steps associated with this component in this exploded view.
11898 You must select a pattern feature for this operation.
11899 This dimension type is not supported for the current operation.
11900 The dialog has no data.
11901 You cannot activate any exploded view at this time. You are not editing the assembly.
11902 You cannot activate this exploded view at this time. This exploded view does not belong to the currently active configuration.
11903 You must select a component, not the assembly itself, to explode.
11904 AutoExplode could not generate any explode steps from the current mating relationships. You may redefine some mating relations or create new explode steps using the step editing tools from this dialog.
11905 Creating New Explode...
11906 Editing Step - '
11907 Creating New Step...
11908 You must select component(s) to explode.
11909 Improper direction specifier selected.
11910 Please select a proper direction to explode.
11911 Explode Step
11912 Edit Definition Explode Step
11913 DerivedLPattern
11914 DerivedCirPattern
11915 LocalLPattern
11916 LocalCirPattern
11917 Explode Line
11918 ExplView
11919 Exploded Views
11920 Configuration
11921 Selected top face is not in left or right component. Two top faces must be selected. Each selected top face must come from a different component.
11922 Selected stop face does not come from left or right component. Selected faces must come from only two components.
11923 Selected contact face does not come from left or right component. Selected faces must come from only two components.
11924 Cannot create dome on a face with multiple loops.
11925 Failed to create surface for the face.
11926 Failed to adjust surface to new height.
11927 Failed to attach the dome surface to the face.
11928 Cannot put dome on non-planar face.
11929 Failed to create dome due to geometry condition.
11930 The face selected for the dome feature is no longer in the model. Please use edit definition to re-select the face.
11931 A dome feature can only be applied to face which is circular, elliptical, or has 4 non-tangent sides.
11932 This exploded view was created prior to SolidWorks97Plus and can not be edited.
11933 Dome
11934 The specified twist control option requires a path and a guide curve. Please select again.
11935 The specified twist control option requires a path or a guide curve. Please select again.
11936 The specified twist control option requires either at least three guide curves or a path and at least two guide curves. Please select again.
11937 hsilgne
11938 Incorrect serial number for this language.
11939 SolidWorks/Mastercam installation mismatch.
11940 Due to the lack of available virtual memory\nyour STL request has been terminated.\nPlease increase your STL deviation and/or\nangular tolerance or increase the available\nmemory for your system.\n
11941 The current operation can not be interrupted or the document is not accessible at this time.
11942 At least three sections are needed to make a closed loft.
11943 Failed to align the knot vectors of the guide curves in their b-spline forms.
11944 The order of the loft sections mis-matches the guide curve(s). Please consider to re-order the loft sections.
11945 Cannot make two planar end faces to cap the side sheet.
11946 The guide curve #%d is invalid. It cannot be converted to b-spline form.
11947 Loft sections have too many segments which may result in invalid body.
11948 Failed to split loft section segments to make equal number of segments on each loft section.
11950 Failed to sweep along the no. %d segment of the path. The sweep resulted in self-intersecting geometry. This may caused by the sweep or end face alignment. Note that the path is merged as one segment when the section is not perpendicular to the path.
11951 Unable to align the sweep body with the end faces: the alignment resulted in invalid body.
11952 Unable to reset the end face for the sweep along the segment # %d of the path
11953 Unable to merge the two end faces for the closed sweep.
11954 Sweep resulted in topologically invalid body.
11955 Failed to reorder the guide curves.
11956 Invaild loft start points detected.
11957 Guide curve # %d is invalid.
11958 Failed to convert the sweep path to b-spline form.
11959 Guide curve # %d is invalid. It does not intersect the section plane.
11960 Guide curve # %d is invalid. It cannot be converted to b-spline form.
11961 Weld bead components cannot float.
11962 A coincident relation between a point and a spline whose geometry is not model-based (from convert entity or offset entity) is currently not supported. Removing the convert or offset relation will also remove the coincident relations to this spline. Do you want to continue?
11963 Cannot save the current changes to the explode step you are editing. Reason: %1 \nPlease undo the last change to this step and press OK again or press Cancel to discard all changes.
11964 The new step could not be created. Do you still want to exit this dialog and save all other changes?
11965 Label <%s> is already being used. Please enter a unique label.
11966 Referenced surface used to resolve ambiguous result no longer exists. Please edit definition and reselect keep piece to resolve ambiguity.
11967 Not all components to be used for this assembly feature are mated or fixed in space. Adding an assembly feature may produce undesirable results later. It is recommended that you position the components before applying any assembly features to them.
11968 Cannot reorder this feature to the new position. You can only reorder within the same model that you are editing.
11969 Pattern for sweep with guide curves is not currently avaliable
11970 Cannot handle the external references for this feature set.
11971 The tangent of the sweep path varies too rapidly. No intermediate sketch can be generated.
11972 Importing large assembly. Component parts will be imported and suppressed in the top level assembly. Use "Unsuppress" to show desired parts and sub-assemblies.
11973 The reference you have selected is not in the edit model.
11974 Create Silhouettes
11975 The dome surface will intersect other parts of the model. Please check the height of the dome.
11976 Origin is selected. Please select a sketch.
11977 The height of dome is too small.
11978 Need to select a planar face to define the dome.
11979 No faces selected.
11980 There may be interferences although no interference body is found. Please report this error to Technical Support.
11981 Values to be linked must belong to the same model.
11982 Some configurations may take time to show. Click OK to show. Click Cancel to abort.
11983 Confirm Show Configuration
11984 Join operation failed because part not found for component %1.
11985 Join operation failed because no body found in component %1.
11986 No vertex is found on the selected curve; no construction plane is created.
11987 Dome height is too large for this direction. Try a smaller value or reverse the direction.
11988 Needs two faces to generate a neutral surface.
11989 The line is on the plane.
11990 Edit Section View
11991 Please select a plane or planar face to section.
11992 Operation not valid because fillet would cut into unblended interior edges. Reduce the fillet radius so it doesn't interfere with these edges.
11993 Please select two non-parallel faces.
11994 One or more fonts could not be properly shown with a height\nspecified in units (e.g. mm). The current printer does not\nsupport these fonts as True Type.\n\nIf the printed results are not acceptable, you may specify a\nheight in points, use another font that is supported as True \nType with the current printer, or try a PostScript driver for the \ncurrent printer.\n\nListed below are the fonts that could not be printed properly.\n
11995 %1 of %2 Pair(s)
11996 Selected loop is not valid for this operation.
11997 One or more components referenced in Cavity Feature are not available in assembly.
11998 Drawings cannot be inserted into assemblies. Paste failed.
11999 Adding the part into this unsaved assembly may create conflict of references. Please save the assembly and try again.
12000 There is no part body for up-to-next option.
12001 SolidWorks 97Plus now applies the scale of the sheet to the\nsketch entities on the sheet. This means that the sheet will\nlook the same but any dimension values will be scaled \naccordingly.\n\nDo you want to convert the sheet's scale to 1:1 to maintain\nthe dimension values of the sheet's sketch geometry?
12002 Silhouettes have not been automatically created for this sketch or drawing view due to an error. If you would like to reference a specific silhouette, click the right mouse button over the corresponding face and select Create Silhouettes.
12003 SolidWorks 97Plus has changed the size of symbols and\nthe width of the geometric tolerance frame to adhere to\nANSI/ISO standards. \n\nDo you want to convert this drawing to the new sizes?
12004 SolidWorks 97Plus now applies the scale of the sheet to the\nsketch entities on the sheet. This means that the sheet will\nlook the same but any dimension values will be scaled \naccordingly.
32768 Dump all registered CRuntimeClasses to debug terminal
32769 Dump all heap allocated objects to the debug terminal
32770 Creates a boss feature by extruding a sketched profile\nExtruded Boss/Base
32772 Creates a fillet feature\nFillet
32774 Creates a cut feature by extruding a sketched profile\nExtruded Cut
32775 Reads in a stock primitive from another system
32776 Chamfers an edge or a chain of tangent edges\nChamfer
32777 Creates a cylindrical hole\nHole
32779 Displays the contents of the object
32780 Displays the object as an icon
32781 Resets the size\nReset Size
32783 Set display options
32784 Turns reference geometry display on or off
32785 Creates a section with sketched section line\nMake Section
32786 Turns planes on or off
32787 Parent/Child...
32789 What's Wrong?
32796 Add a part of subassembly to an assembly\nComponent
32797 Brings up list of undoable actions\nUndo List
32798 Rebuild all features\Roll forward
32799 Suppresses the selected feature or component\nSuppress
32800 Unsuppresses the selected feature or component\nUnsuppress
32801 Deletes the selection\nDelete
32802 Reverts the model to the state it was in before the last feature was rebuilt.\nRollback
32803 Rebuilds the part/assembly/drawing\nRebuild
32804 Drags the selection\nDrag
32805 Creates a pattern using the selected feature
32808 Saves all documents
32809 Runs the macro in the active window
32810 Moves a component\nMove Component
32811 Rotates an un-mated component around its centerpoint\nRotate Component Around Centerpoint
32813 Inserts an OLE object
32814 Dump display facets to a file
32815 Saves all active documents
32816 Inserts CUT item with advanced options
32817 Creates an axis.\nAxis
32818 Creates a plane.\nPlane
32819 Creates a revolved feature based on profile and angle parameter\nRevolved Boss/Base
32820 Creates a lofted feature between two or more profiles\nLoft
32821 Inserts another part as the base feature in this part
32822 Creates a lofted cut between two or more profiles\nLoft
32827 Makes view direction normal to a selected face
32828 Select a view to display
32829 Creates a cut away view
32830 Explodes current assembly
32831 Displays all layout geometry
32835 Records the mouse and keyboard actions to text file am.amb.
32836 Adds a model view to drawing\nRelative View
32841 Unfolds a new view from an existing view\nProjected View
32850 Records (or pauses recording of) actions to create a macro\nRecord\Pause Macro
32851 Runs a macro\nRun Macro
32852 Stops macro recorder\nStop Macro
32854 Changes light source definition\nLights
32855 Dumps the contents of the selected Sketch into trace window
32859 Creates a shell feature\nShell
32871 Rebuild feature by feature
32872 Rebuild up to a selected feature
32874 Select component to move.
32875 Insert a break
32876 Inserts an auxiliary view of an inclined surface\nAuxiliary View
32877 Creates a section view\nSection View
32878 Creates a detail view\nDetail View
32879 Inserts dimensions for selected view or feature\nDimensions
32880 Inserts a note\nNote
32881 Attaches a balloon note to the selected edge or face.\nBalloon
32882 Inserts a symbol
32884 Hides geometry
32885 Shows geometry
32890 Inserts a jog
32891 Creates a broken view
32895 Inserts a construction point
32896 Inserts dimension between two lines\nDimension
32897 Insert a hole with pre-defined cross-section\nHole
32898 Create the first section in a file
32901 Apply draft to a selected surface\nDraft
32902 Check out an existing project file
32903 Setup Grid parameters\nGrid
32904 Generate a 1st Angle Projection of a model\nStandard 3 View
32905 Generate a standard 3 view drawing (1st or 3rd Angle)\nStandard 3 View
32907 Sketch a line\nLine
32909 Line
32910 Inserts a design table
32911 Centerpoint Arc
32912 Selects a sheet in the drawing
32913 Creates a new sheet in current drawing\nSheet
32914 Creates a centerpoint arc: center, start, end\nCenterpoint Arc
32916 Tangent Arc
32917 Creates a sketch on a selected plane or face\nSketch
32918 Creates sketched circles\nCircle
32919 Creates sketched splines\nSpline
32920 Creates a cut feature by revolving a sketched profile\nRevolved Cut
32921 Edit Sketch
32922 Create sketched centerlines\nCenterline
32923 Trims or extends sketch curve segments\nTrim to Edge
32924 Dump the information about the entity
32925 3 Point Arc
32926 Dimension
32927 Exit Sketch
32928 Edit Sketch Plane\nEdit Sketch Plane
32929 Component Properties in View
32931 Edits the embedded design table
32932 Edits the design table in separate application
32933 Puts the model into the assembly context where the selected feature was created.\nEdit In Context
32934 Constrains two sketch elements or one sketch element and one model element to be coincident\nConstrain coincident
32935 Constrains two sketch elements or sketch and model element to be parallel\nConstrain Parallel
32936 Constrains two sketch elements or a sketch element and model edge to be concentric\nConstrain Concentric
32937 Sketch a section line\nSection
32938 Unsuppresses selected feature or component and dependents\nUnsuppress with Dependents
32939 Relation Manager for this part
32940 Constrains two sketch elements or one sketch element and one model element to be perpendicular. \nConstrain Perpendicular
32941 Constrains two sketch elements or a sketch element and model element to be tangent\nConstrain Tangent
32943 Groups selected items
32944 Displays geometric relations
32945 Turns automatic creation of geometric relations on or off
32946 Forces regeneration of the whole part
32948 Initialize the memory leak monitor
32949 Dump the un-freed allocations since the start of mem leak monitor
32950 Print un-freed, allocated memory since start of monitor
32951 Stop monitor and output compact stats
32952 Shows hidden lines with more than one segment in blue
32953 Turns dynamic highlighting on or off
32954 Changes the crosshatch pattern on the selected section face\nCrosshatch
32955 Edit definition\nEdit Definition
32956 Converts selected model edges or sketch entities to a sketch segments\nConvert Entities
32957 Converts selected model edge to a sketch centerline\nConvert to Centerline
32958 Inserts a new geometric tolerancing symbol.\nGeometric Tolerance
32959 Trims or extends a sketch segment\nTrim/Extend
32960 Displays and deletes geometric relations\nDisplay/Delete Relations
32961 Mirrors selected segments about a centerline\nMirror
32962 Fillets the corner of two lines\nFillet
32963 Names a view to be saved with the model
32966 Creates a swept feature by sweeping a profile along a path curve\nSweep
32967 Creates a swept cut by sweeping a profile along a path curve\nSweep
32968 Inserts a point at the midpoint of a line or arc\nMid Point
32969 Inserts a point at the intersection of two lines\nIntersection Point
32970 Creates a horizontal dimension between two points\nHoriz. Dimension
32971 Hides or shows selected dimensions
32972 Creates a vertical dimension between two points\nVertical Dimension
32973 Creates an arc tangent to a line\nTangent Arc
