Chip 1997 April/Chip_1997-04_cd.bin/ovladace/turtle/tb929_95.arj/INSTALL.DAT

Text File | 1996-05-03 | 9.4 KB | 354 lines

//--------------------------------------------------------------------
//
// INSTALL on-line Help Text File
//
// Help Customization Guidelines:
//
// 0) Comment lines start with leading '//'.
// 1) Help Message Text starts with #MESSAGE statement
// 2) Never change the number after the #MESSAGE statement. That is
//    the search Message ID for the INSTALL program.
// 3) LINES statement defines how many (lines) x (characters) allowed.
//    Never exceed this limits when you type the text for the message.
// 4) TITLE statement defines the sub-Title of this message.
//    (allow to modify for your customization)
// 5) Text area starts and ends with a '$'.
//    (allow to modify for your customization)
// 6) the INSTALL program is not going to format your
//    text. It just show whatever text you typed here
//    line by line. So you have to do the formatting for
//    better effect and please use SPACEs but not TABs.
//    (you don't need to enter trailing SPACE lines. If there is space
//     left at the bottom of a HELP message, white space is the default.)
// 7) Anyway, give a try and see how it goes.
//
// 9) Format Overview (example)
//
//    #MESSAGE = 1                         // starts Help message 1
//    TITLE="Select CD-ROM Type"        // sub-title of this message
//    LINES=9x50                        // allowed text area:
//                                      // 9 lines x 50 characters
//    $                                    // starts text area
//    TEXT LINEs
//    TEXT """"                            // help text
//    " " "
//    $                                 // end of text area
//-----------------------------------------------------------------

//
// INSTALL Help Text: Message by Message
//

#MESSAGE = 1
TITLE="Welcome to the TBS929 Installation"
LINES=9x42
$
This is a complete installation and
configuration program for your TBS929
card.  A mouse is recommended, but
if none, use the following keys:
  [TAB]       to move to option
  [ENTER]     to execute option
  []        to select option
  [F3]        to exit the installation
  [ALT+Key]   to activate a button
$

#MESSAGE = 2
TITLE="Installation Options"
LINES=6x52
$
This Installation will do the following:

- Install drivers and utilities for DOS
- Configure and test your TBS929
- Install and setup CD ROM software drivers
- Display contents of README.TXT
$

#MESSAGE = 20
TITLE="Test & Configuration Options"
LINES=6x52
$
This Test and Configuration program will:

- Configure and test your TBS929
- Change CD ROM settings and update system files
- Perform 8 bit, 16 bit and FM Music Sound Tests
- Adjust volume settings
- Display contents of README.TXT
$

#MESSAGE = 3
TITLE="User Directory Selection"
LINES=4x48
$
Select the drive and the directory you wish
to install your software to.  The required
and available disk space for the
complete installation is listed below.
$

#MESSAGE = 4
TITLE="Microsoft Windows Directory Selection"
LINES=5x48
$
The program needs to know where your Windows
directory is. If you do not have Windows
installed or you do not want to install the
device drivers and applications for Windows,
select [NONE].
$

#MESSAGE = 5
TITLE="CD ROM Selection"
LINES=4x44
$
The TBS929 can be used as a CD ROM
interface board.  Select your CD ROM drive
type or select [None] if you do not want to
connect a CD ROM drive to the sound card.
$

#MESSAGE = 6
TITLE="CD ROM Default Settings"
LINES=4x44
$
Select [OK] if you want to accept the
default settings for your CD ROM.
Select [CUSTOMIZE] if you want to customize
the I/O address, Interrupt and DMA channel.
$

#MESSAGE = 7
TITLE="CD ROM Harware Configuration"
LINES=3x48
$
Select [OK] if you want to accept the selected
settings for your CD ROM.  Select [DEFAULTS]
if you want to reset to the default settings.
$

#MESSAGE = 8
TITLE="File Copy Confirmation"
LINES=4x45
$
We are going to start copying files to
your hard disk. Select [OK] to continue if
the user directory is correct. Select
[CHANGE] if you want to make a change.
$

#MESSAGE = 11
TITLE="SOUND TEST"
LINES=3x36
$
Select a Sound Test option below.
Select [DONE] when test is done and
go back to the previous Window.
$

#MESSAGE = 13
TITLE="Select MSCDEX.EXE"
LINES=7x44
$
To use your CD ROM drive, you need a CD ROM
utility 'MSCDEX.EXE' from Microsoft. After
scanning your Disk, we have found MSCDEX(s)
and listed them below. You want to use the
latest version available which most likely
will be in your Windows95 Command directory.
$

#MESSAGE = 14
TITLE="No MSCDEX.EXE in your System"
LINES=10x50
$
To use your CD ROM Drive, you need the program
MSCDEX.EXE from    Microsoft. We have scanned
your hard disk(s) and did not find one. Besides,
your DOS version is very old. We don't have a
MSCDEX version good for you. INSTALL has inserted
a MSCDEX line with leading 'REM' into your
AUTOEXEC.BAT anyway. If you locate a MSCDEX file
later, please copy it into the \SOUND16 directory
and remove the REMark from the MSCDEX line.
$

#MESSAGE = 15
TITLE="System Files Update"
LINES=6x48
$
We are now going to update your DOS
system files CONFIG.SYS and AUTOEXEC.BAT.
Select [OK] if you want to make the changes
now or select [BACKUP ONLY] if you want
only to save the changes to the backup
files CONFIG.TB and AUTOEXEC.TB.
$

#MESSAGE = 16
TITLE="Windows System Files Update"
LINES=4x46
$
We are now going to update your WINDOWS
system files SYSTEM.INI and MIDIMAP.CFG.
Select [OK] if you want to make the changes
now or select [BACKUP ONLY] if you want
only to save the changes to the backup
files SYSTEM.TB and MIDIMAP.TB.
$

#MESSAGE = 17
TITLE="Windows Sound Application Installation"
LINES=5x46
$

We have also installed Windows Sound
Applications into your system. The Sound
Applications Group and its Applet Icons will
show on your screen when you run Windows the
very next time.
$


#MESSAGE = 18
TITLE="Installation Successful"
LINES=10x46
$
Installation has completed successfully. You
must now reboot your system. Remove any disks
from your floppy drives and select [REBOOT].
If you wish to return to the system, select
[EXIT].

If you find it necessary to adjust these
settings at a later time, run SNDINIT at
the DOS prompt.

Thank you, and enjoy the TBS929!
$


#MESSAGE = 19
TITLE="Not Enough Conventional Memory Detected"
LINES=10x56
$
Your system has LESS THAN 500 KBytes of recommended
conventional memory. To run DOS games, you need at
least the recommended size above. It is also
recommended that this amount of memory be available
in order to successfully run this program. You can
increase your memory either by running a memory maker
program that comes with your operating system; or
remove any memory resident programs that resides in
your system memory. Do you wish to exit this program
and increase your system memory now?
$


#MESSAGE = 21
TITLE="Turtle Beach Product Registration"
LINES=6x46
$
Now is a good time to register your Turtle
Beach product in order to receive the latest
services and technical support from Turtle
Beach.
$

#MESSAGE = 22
TITLE="Welcome to the TBS929 DOS Mode Installation"
LINES=9x42
$
This is a complete installation and
configuration program for your TBS929
card.  A mouse is recommended, but
if none, use the following keys:
  [TAB]       to move to option
  [ENTER]     to execute option
  []        to select option
  [F3]        to exit the program
  [ALT+Key]   to activate a button
$

#MESSAGE = 23
TITLE="CD ROM driver Installation"
LINES=6x48
$
We do not have the CD ROM driver for
your CD ROM. We will only update the
CD ROM settings of the TBS929 in the
CONFIG.SYS file. Please run the installation
program from your CD ROM manufacturer to
install the CD ROM driver and MSCDEX program.
$

#MESSAGE = 24
TITLE="Reboot System"
LINES=5x49
$
Your CONFIG.SYS has been updated according to
the new settings for your CD ROM. You must REBOOT
your computer in order for the new settings to
take effect. Select [OK] to REBOOT your computer.
Select [EXIT] to return to DOS.
$

#MESSAGE = 25
TITLE="Reboot System"
LINES=4x46
$
Your BLASTER Environment Variable is updated
in your AUTOEXEC.BAT file. Some DOS games may
reference this variable for initialization
purposes. Do you wish to reboot your computer?
$

#MESSAGE = 26
TITLE="Error!"
LINES=2x48
$
Hardware Error Detected! Please reconfigure your
the I/O Port, IRQ, or DMA settings of the TBS929.
$

#MESSAGE = 27
TITLE="Error!"
LINES=4x45
$
You have selected the same I/O Port setting
between your Audio, CD ROM, and MPU-401
device. This will cause conflict on your
system. Please reselect a different I/O Port.
$

#MESSAGE = 28
TITLE="Error!"
LINES=4x47
$
You have selected the same IRQ settings between
your Audio, CD ROM, and MPU-401 device. This
will cause conflict on your system. Please
reselect a different IRQ setting.
$

#MESSAGE = 29
TITLE="Error!"
LINES=4x47
$
You have selected the same DMA settings between
your Audio, and CD ROM device. This will cause
conflict on your system. Please reselect a
different DMA setting.
$

#MESSAGE = 30
TITLE="Warning!"
LINES=3x48
$
You have selected Windows Sound System using
IRQ 5.  Some DOS games that support Windows
Sound System may not work with this option.
$