home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 April
/
Chip_1997-04_cd.bin
/
ovladace
/
novell
/
dwenu_n2
/
dwenu_n2.exe
/
LANDRV32
/
SMCPWR.LDI
< prev
Wrap
Text File
|
1996-06-13
|
11KB
|
326 lines
;
; Novell NetWare Server Driver Description File for SMCPWR.LAN
;
VER: 2.10
SYN: 1.00
DR SMCPWR
{
DES: $DC21X4_1
HELP: $DC21X4_2
PAR: 2.00
PROD: 'PCI.1011.0002.0000.0000.2?',
'PCI.1011.0009.10b8.2001.20',
'PCI.1011.0014.0000.0000.1?',
'PCI.1011.0009.0000.0000.11',
'PCI.1011.0009.0000.0000.12',
'PCI.1011.0009.0000.0000.2?',
'PCI.1011.0019.0000.0000.1?'
FILE: SMCPWR.LAN
TIME: 15
PROMPT SLOT
{
DES: $DC21X4_3
HELP: $DC21X4_4
TYPE: DECIMAL
VAL: 1-65535
DEF: UNDEFINED
OUT: 'SLOT=%s'
}
FRAME FrameSelect
{
CD: $DC21X4_5
CH: $DC21X4_6
CD: $DC21X4_7
CH: $DC21X4_8
CD: $DC21X4_9
CH: $DC21X4_10
CD: $DC21X4_11
CH: $DC21X4_12
DEF: 1,2,3,4
}
LIST Attachment OPTIONAL
{
HELP: $DC21X4_13
CD: $DC21X4_14
CH: $DC21X4_15
CD: $DC21X4_16
CH: $DC21X4_17
CD: $DC21X4_18
CH: $DC21X4_19
CD: $DC21X4_20
CH: $DC21X4_21
CD: $DC21X4_22
CH: $DC21X4_23
CD: $DC21X4_24
CH: $DC21X4_25
CD: $DC21X4_26
CH: $DC21X4_27
OUT: '%s'
}
PROMPT NODE OPTIONAL
{
DES: $DC21X4_28
TYPE: HEX
VAL: 1-FFFFFFFFFFFE
DEF: UNDEFINED
OUT: 'NODE=%s'
}
LIST Line_Speed OPTIONAL
{
DES: $DC21X4_29
HELP: $DC21X4_30
CD: $DC21X4_31
CH: $DC21X4_32
CD: $DC21X4_33
CH: $DC21X4_34
OUT: 'LINE_SPEED=%s'
}
}
DLANG: 4
;English
$DC21X4_1 = "SMCPWR PCI ethernet adapter"
$DC21X4_2 = "This driver supports PCI bus devices"
$DC21X4_3 = "Slot"
$DC21X4_4 = "Select the slot number that corresponds to the physical
expansion slot where the board or other device is installed."
$DC21X4_5 = "802.3"
$DC21X4_6 = "ethernet_802.3"
$DC21X4_7 = "802.2"
$DC21X4_8 = "ethernet_802.2"
$DC21X4_9 = "SNAP"
$DC21X4_10 = "ethernet_snap"
$DC21X4_11 = "ethernet II"
$DC21X4_12 = "ethernet_II"
$DC21X4_13 = "Choose the connection/media type you would
like to use, or NONE for preprogramed card's
default. Please note that since this driver supports
multiple PCI ethernet controllers some of the options
given are non applicable to some controllers, i.e. 100MBPS
is not applicable to DC21040 10MBPS devices."
$DC21X4_14 = "Twisted Pair 10MBPS"
$DC21X4_15 = "TP"
$DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
$DC21X4_17 = "TP_FULL_DUPLEX"
$DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
$DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
$DC21X4_20 = "AUI - Thick Wire"
$DC21X4_21 = "AUI"
$DC21X4_22 = "BNC - Thin Wire"
$DC21X4_23 = "BNC"
$DC21X4_24 = "Fast Ethernet 100MBPS"
$DC21X4_25 = "LINE_SPEED=100"
$DC21X4_26 = "T4 Fast Ethernet 100MBPS"
$DC21X4_27 = "T4"
$DC21X4_28 = "Node Address"
$DC21X4_29 = "Line Speed"
$DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
network interface) select the speed you would like
the interface to work in. Otherwise leave NO VALUE
as your selection."
$DC21X4_31 = "10"
$DC21X4_32 = "10"
$DC21X4_33 = "100"
$DC21X4_34 = "100"
LANG: 6
;French
$DC21X4_1 = "SMCPWR PCI ethernet adapter"
$DC21X4_2 = "This driver supports PCI bus devices"
$DC21X4_3 = "Slot"
$DC21X4_4 = "Select the slot number that corresponds to the physical
expansion slot where the board or other device is installed."
$DC21X4_5 = "802.3"
$DC21X4_6 = "ethernet_802.3"
$DC21X4_7 = "802.2"
$DC21X4_8 = "ethernet_802.2"
$DC21X4_9 = "SNAP"
$DC21X4_10 = "ethernet_snap"
$DC21X4_11 = "ethernet II"
$DC21X4_12 = "ethernet_II"
$DC21X4_13 = "Choose the connection/media type you would
like to use, or NONE for preprogramed card's
default. Please note that since this driver supports
multiple PCI ethernet controllers some of the options
given are non applicable to some controllers, i.e. 100MBPS
is not applicable to DC21040 10MBPS devices."
$DC21X4_14 = "Twisted Pair 10MBPS"
$DC21X4_15 = "TP"
$DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
$DC21X4_17 = "TP_FULL_DUPLEX"
$DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
$DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
$DC21X4_20 = "AUI - Thick Wire"
$DC21X4_21 = "AUI"
$DC21X4_22 = "BNC - Thin Wire"
$DC21X4_23 = "BNC"
$DC21X4_24 = "Fast Ethernet 100MBPS"
$DC21X4_25 = "LINE_SPEED=100"
$DC21X4_26 = "T4 Fast Ethernet 100MBPS"
$DC21X4_27 = "T4"
$DC21X4_28 = "Node Address"
$DC21X4_29 = "Line Speed"
$DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
network interface) select the speed you would like
the interface to work in. Otherwise leave NO VALUE
as your selection."
$DC21X4_31 = "10"
$DC21X4_32 = "10"
$DC21X4_33 = "100"
$DC21X4_34 = "100"
LANG: 7
;German
$DC21X4_1 = "SMCPWR PCI ethernet adapter"
$DC21X4_2 = "This driver supports PCI bus devices"
$DC21X4_3 = "Slot"
$DC21X4_4 = "Select the slot number that corresponds to the physical
expansion slot where the board or other device is installed."
$DC21X4_5 = "802.3"
$DC21X4_6 = "ethernet_802.3"
$DC21X4_7 = "802.2"
$DC21X4_8 = "ethernet_802.2"
$DC21X4_9 = "SNAP"
$DC21X4_10 = "ethernet_snap"
$DC21X4_11 = "ethernet II"
$DC21X4_12 = "ethernet_II"
$DC21X4_13 = "Choose the connection/media type you would
like to use, or NONE for preprogramed card's
default. Please note that since this driver supports
multiple PCI ethernet controllers some of the options
given are non applicable to some controllers, i.e. 100MBPS
is not applicable to DC21040 10MBPS devices."
$DC21X4_14 = "Twisted Pair 10MBPS"
$DC21X4_15 = "TP"
$DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
$DC21X4_17 = "TP_FULL_DUPLEX"
$DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
$DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
$DC21X4_20 = "AUI - Thick Wire"
$DC21X4_21 = "AUI"
$DC21X4_22 = "BNC - Thin Wire"
$DC21X4_23 = "BNC"
$DC21X4_24 = "Fast Ethernet 100MBPS"
$DC21X4_25 = "LINE_SPEED=100"
$DC21X4_26 = "T4 Fast Ethernet 100MBPS"
$DC21X4_27 = "T4"
$DC21X4_28 = "Node Address"
$DC21X4_29 = "Line Speed"
$DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
network interface) select the speed you would like
the interface to work in. Otherwise leave NO VALUE
as your selection."
$DC21X4_31 = "10"
$DC21X4_32 = "10"
$DC21X4_33 = "100"
$DC21X4_34 = "100"
LANG: 8
;Italian
$DC21X4_1 = "SMCPWR PCI ethernet adapter"
$DC21X4_2 = "This driver supports PCI bus devices"
$DC21X4_3 = "Slot"
$DC21X4_4 = "Select the slot number that corresponds to the physical
expansion slot where the board or other device is installed."
$DC21X4_5 = "802.3"
$DC21X4_6 = "ethernet_802.3"
$DC21X4_7 = "802.2"
$DC21X4_8 = "ethernet_802.2"
$DC21X4_9 = "SNAP"
$DC21X4_10 = "ethernet_snap"
$DC21X4_11 = "ethernet II"
$DC21X4_12 = "ethernet_II"
$DC21X4_13 = "Choose the connection/media type you would
like to use, or NONE for preprogramed card's
default. Please note that since this driver supports
multiple PCI ethernet controllers some of the options
given are non applicable to some controllers, i.e. 100MBPS
is not applicable to DC21040 10MBPS devices."
$DC21X4_14 = "Twisted Pair 10MBPS"
$DC21X4_15 = "TP"
$DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
$DC21X4_17 = "TP_FULL_DUPLEX"
$DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
$DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
$DC21X4_20 = "AUI - Thick Wire"
$DC21X4_21 = "AUI"
$DC21X4_22 = "BNC - Thin Wire"
$DC21X4_23 = "BNC"
$DC21X4_24 = "Fast Ethernet 100MBPS"
$DC21X4_25 = "LINE_SPEED=100"
$DC21X4_26 = "T4 Fast Ethernet 100MBPS"
$DC21X4_27 = "T4"
$DC21X4_28 = "Node Address"
$DC21X4_29 = "Line Speed"
$DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
network interface) select the speed you would like
the interface to work in. Otherwise leave NO VALUE
as your selection."
$DC21X4_31 = "10"
$DC21X4_32 = "10"
$DC21X4_33 = "100"
$DC21X4_34 = "100"
LANG: 14
;Spanish
$DC21X4_1 = "SMCPWR PCI ethernet adapter"
$DC21X4_2 = "This driver supports PCI bus devices"
$DC21X4_3 = "Slot"
$DC21X4_4 = "Select the slot number that corresponds to the physical
expansion slot where the board or other device is installed."
$DC21X4_5 = "802.3"
$DC21X4_6 = "ethernet_802.3"
$DC21X4_7 = "802.2"
$DC21X4_8 = "ethernet_802.2"
$DC21X4_9 = "SNAP"
$DC21X4_10 = "ethernet_snap"
$DC21X4_11 = "ethernet II"
$DC21X4_12 = "ethernet_II"
$DC21X4_13 = "Choose the connection/media type you would
like to use, or NONE for preprogramed card's
default. Please note that since this driver supports
multiple PCI ethernet controllers some of the options
given are non applicable to some controllers, i.e. 100MBPS
is not applicable to DC21040 10MBPS devices."
$DC21X4_14 = "Twisted Pair 10MBPS"
$DC21X4_15 = "TP"
$DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
$DC21X4_17 = "TP_FULL_DUPLEX"
$DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
$DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
$DC21X4_20 = "AUI - Thick Wire"
$DC21X4_21 = "AUI"
$DC21X4_22 = "BNC - Thin Wire"
$DC21X4_23 = "BNC"
$DC21X4_24 = "Fast Ethernet 100MBPS"
$DC21X4_25 = "LINE_SPEED=100"
$DC21X4_26 = "T4 Fast Ethernet 100MBPS"
$DC21X4_27 = "T4"
$DC21X4_28 = "Node Address"
$DC21X4_29 = "Line Speed"
$DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
network interface) select the speed you would like
the interface to work in. Otherwise leave NO VALUE
as your selection."
$DC21X4_31 = "10"
$DC21X4_32 = "10"
$DC21X4_33 = "100"
$DC21X4_34 = "100"