7 PJL Settings: Controls the JetDirect card's use of PJL (all recommended). Toner Notification: Controls whether users get advanced notice when toner is getting low.
8 Frame Types: Controls the frame types that the card and peripheral should use.
9 Protocol Stacks: Controls the protocol stacks in which the JetDirect card and peripheral can receive print data.
10 Restart NetWare Server Connection: Restarts the JetDirect connection with file server. Complete Re-initialization: Re-boots the JetDirect card (same as printer power cycle).
11 Broadcast Rate (sec.): Controls the frequency of "SAPs" with NetWare bindery. Job Poll Rate (sec.): Controls frequency in which the JetDirect peripheral will check NetWare queues for new print jobs.
12 The source routing option for the card. You may also change the default address for the card. ONLY change the address when absolutely necessary.
13 Reset Card to Factory Defaults: Clears all information from card (Includes name).
14 Warning: Changing the frame type could result in a loss of communication with the printer. Do you want to continue?
15 Reset JetDirect Card
16 Advanced
17 Time Intervals
18 Protocol Stacks
19 Frame Types
20 Firmware Date: %s
21 Token Ring
22 Packets Received
23 Packets Transmitted
24 Name: %s
25 Date: %s
26 Version: %s
27 PCL
28 PostScript
29 Engine Page Count: %d
30 Firmware Date: %s
31 Frame Types
63 Diagnostics not available
64 Unicast Packets Received: %10lu
65 Total Packets Received: %10lu
66 Bad Packets Received: %10lu (%2d.%d%%)
67 Framing Errors Received: %10lu (%2d.%d%%)
68 Line Errors Received: %10lu (%2d.%d%%)
69 Burst Errors Received: %10lu (%2d.%d%%)
70 FS Set Errors Received: %10lu (%2d.%d%%)
71 Unicast Packets Transmitted: %10lu
72 Total Packets Transmitted: %10lu
73 Transmission Errors: %10lu (%2d.%d%%)
74 Transmit Late Collisions: %10lu (%2d.%d%%)
75 Retransmissions: %10lu (%2d.%d%%)
76 File Server: ????
77 File Server: %s (Not Attached)
78 File Server: %s
79 Connection Status(0x%02X): %s
80 NCP Status(0x%02X): %s
81 Queue Name: Unknown Queue(s)
82 Queue Name: %s
83 Queue Name: %s (Error)
84 Print Server: %s
85 Printer Number: %d
86 Frame Type: %s
87 Network: %s
88 Network Hops: %u
89 Frame Counts
90 Ethernet_802.2 (EN_8022): %10lu
91 Ethernet_Snap (EN_SNAP): %10lu
92 Ethernet_II (EN_II): %10lu
93 Ethernet_802.3 (EN_8023): %10lu
94 Token-Ring (TR_8022): %10lu
95 Token-Ring_Snap (TR_SNAP): %10lu
96 Server Status: %s
97 Printer Status: %s
98 Control Panel
99 BOOTP
100 Printer Status: %s
101 System Location: %s
102 System Contact: %s
103 Host Name: %s
104 Config Source: %s
105 IP Address: %s
106 Network Mask: %s
107 Default Gateway: %s
108 Idle Timeout(secs): %lu
109 System Log Server: %s
110 Syslog Facility: %s
111 BOOTP Server: %s
112 Connections
113 Connections Accepted: %lu
114 Connections Denied: %lu
115 Connections Aborted: %lu
116 Connections Killed: %lu
117 Byte Counts
118 Bytes Received: %lu (current connection)
119 Bytes Sent: %lu (current connection)
120 Total Bytes Received: %lu (since reset)
121 Total Bytes Sent: %lu (since reset)
122 TCP Statistics
123 %lu segments received
124 %lu segments received in error
125 %lu segments received in order
126 %lu segments received out of order
127 %lu zero window probes
128 %lu segments discarded
129 %lu segments sent
130 UDP Statistics
131 %lu datagrams received and delivered
132 %lu discarded due to no destination application
133 %lu discarded due to other reasons
134 %lu datagrams sent
135 IP Statistics
136 %lu datagrams received
137 %lu discarded due to IP header errors
138 %lu discarded due to address error
139 %lu discarded due to an unknown protocol
140 %lu datagram transmission requests
141 %lu discarded due to lack of resources
142 %lu discarded because no route to destination
143 %lu valid routing entries discarded
144 ICMP Statistics
145 %lu messages received
146 %lu messages received with ICMP-specific errors
147 %lu destination unreachable
148 %lu time exceeded
149 %lu source quench
150 %lu redirect
151 %lu echo
152 %lu messages sent
153 %lu destination unreachable
154 %lu time exceeded
155 %lu echo reply
156 SNMP Statistics:
157 %lu packets received
158 %lu GetRequests
159 %lu GetNexts
160 %lu SetRequests
161 %lu bad community names
162 %lu operations prevented by SNMP community name
163 %lu packets sent
164 %lu traps
165 Flash Download
166 Steps: 1) Click on the "+" next to the printer component / environment you wish to gather diagnostics information. 2) Select "Expand All" button to view all values, or "Collapse All" to hide them.
167 Unknown
168 Printer IO Type: %s
169 Network IO Type: %s
170 3) Select "Refresh" button to update all values. 4) Select "Save" button to save this information.
171 Printer
172 MIO Revision: %d.%d
173 MIO Revision: Unknown
174 Diagnostics
175 JetDirect IO Ports: %s
176 Version: %s
177 JetDirect Model: %s
178 Network Number: %s
179 Node Address: %s
180 &Collapse All
181 &Expand All
182 JetDirect
183 Asset Number: %s
184 Serial Number: %s
185 SIMM Modules
186 Slot %d: %s: %ld MB
187 Slot %d: %s
188 Empty
189 Unknown
190 Unsupported
191 Read Only Memory
192 Volatile RAM
193 Non-Volatile RAM
194 Flash Memory
195 Disk Drive
196 RAM/ROM
197 Input Paper Device
198 Output Paper Device
199 Text Files (*.txt)|*.txt|All Files (*.*)|*.*|
200 txt
201 jetadmin.txt
223 Restart Server Connections?
224 HP JetAdmin
225 JetDirect connections to file servers restarted.
226 Re-initialize card completely?
227 JetDirect card re-initialized.
228 Reset card to factory defaults?
229 JetDirect configuration set to factory defaults.
230 Incorrect address specified.
231 Internal Error: Settings not saved.
232 Internal Error: LAA not changed
233 Diagnostics
234 Type: Bindery
235 Type: Remote Printer
236 Type: NetWare Directory Services
237 NDS Status(0x%02X): %s
238 Connections
239 Bindery Queues
240 No Such Queue or Printer Object
241 Authentication Failed
242 Resolve Name Failed
243 No Licenses
244 Connected To File Server
400 Status Not Available
401 NetWare Protocol Not Configured
402 Configuration Error
403 Configuration Channel Busy
404 Initializing Interface
405 Shutdown
406 Trying to Connect to Print Server
407 Unable to Find Print Server
408 Unable to Connect to Print Server
409 Printer Number in Use
410 Printer Number Not Defined
411 Connected to Print Server
412 Disconnecting from Print Server
413 Trying to Connect to File Server
414 Unable to Find File Server
415 Unencrypted Password Error
416 Print Server Not Defined
417 Password Error
418 No Queue Assigned
419 Connected to File Server
420 Disconnecting from File Server
421 Unable to Connect to File Server
422 Unable to Negotiate Buffer Size
423 Unable to Log Into File Server
424 Unable to Set Password
425 Unable to Attach to Queue
426 Connecting to File Server
427 Error Connecting to File Server
428 Out of Buffers
429 Connection to Print Server Failed
430 Unable to Reserve Printer Number
431 Print Server Requested Disconnect
432 Unexpected Data from Print Server
433 Listening for Connection
434 Connected to Client/Server
435 NetWare Protocol is Disabled
436 NetWare Protocol Not in use
438 Maximum File Servers Exceeded
439 Cannot login
440 Cannot Authenticate
441 Cannot Change Password
442 Cannot Read Server Key
443 Cannot Read Print Server Key
444 Cannot Resolve Server Name
445 Cannot Get Server Address
446 Cannot Resolve Print Server Name
447 Cannot Read Print Server Printer List
448 Cannot Read Printer Notify List
449 Cannot Read Printer Queue List
450 Cannot Resolve Printer Object
451 Invalid Server Version
452 No Printer Objects Assigned
453 Maximum Printer Objects Assigned
454 No Queues Objects Assigned
455 Maximum Queue Objects Assigned
456 Cannot Find Tree
457 Cannot Change Connection State
458 Cannot Resolve Queue
459 Cannot Read Queue Host
500 Ethernet_802.2
501 Ethernet_Snap
502 Ethernet_II
503 Ethernet_802.3
504 Token-Ring
505 Token-Ring_Snap
506 Token-Ring Source Routing
507 Token-Ring_Snap Source Routing
1000 MS Sans Serif
1001 NetWare Directory Services
1002 NDS Status (NDS):
1003 Not Configured.
1004 Not Available.
1005 Cannot Locate NDS Tree
1006 Cannot Authenticate into NDS Tree
1007 Cannot Find NDS Print Server Object
1008 Cannot Locate NDS Print Queues
1009 Cannot Locate NDS Printer Objects
1010 Not Supported.
1011 To enable NDS support, both a Tree Name and a context must be specified.
1012 NWADMIN.EXE must be used to configure the file server for the NDS support in the JetDirect. Print queues specified in JetAdmin will be serviced through bindery services.
1013 Tree: %s
1014 Print Server Context: %s
1015 Print Server Object: %s
1016 Printer may be offline
1017 File server timeout
1018 File server downed
1019 Intruder lockout
1020 No queue job
1021 Queue error
1022 Queue on hold
1023 No such object
1024 Intermediate error
1025 Printer Name: %s
1026 Phase: %s
1027 Network Number: %s
1028 Node Number: %s
1029 Zone: %s
1030 Server Address: %s
1031 Peer-To-Peer
1032 Connection to JetDirect card lost. Properties will now be closed.
1033 Please turn off the printer for the reset to take effect. Properties will now be closed.
1034 ANSI_CHARSET
1035 6
1036 Maximum Connections: %lu
1037 Available Connections: %lu
1038 Server Packet Size: %lu
1039 Connection Status: %s
1040 Connected
1041 Waiting for Connection
1042 Port #%d
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61588 Linked %s
61589 Unknown Type
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61829 %1\nUnable to register document.\nThe document may already be open.
