256 The diskette I/O subsystem reports invalid parameter or function code. This may indicate an invalid device/driver state, and/or questionable system stability. Save any open files before retrying this operation!
257 DiskFactory32
258 DiskFactory32 - ~:\
512 BAD SECTOR ADDRESS: Diskette being Read/Written is not formatted properly, is not a standard DOS format, or the media type is incorrect.
513 ERROR -- INSUFFICIENT GLOBAL MEMORY AVAILABLE
514 Unable to read .INI file parameters, local memory allocation failure.
520 The selected file is not a valid diskette image, or was created with an incompatible version.
768 DISKETTE IS WRITE PROTECTED: This diskette can not be written or formatted. Use a different diskette, or remove the write protect tab.
1024 SECTOR NOT FOUND: Track being Read/Written is not formatted properly, or is not a standard DOS format.
1280 BAD SECTOR OR SECTOR NOT FOUND: A sector could not be found at it's expected location, or it's sector ID field is invalid. (Could mean wrong media.)
1290 SAFETY CHECK WARNING: First Track Identical to SOURCE
1536 CHANGE LINE SET: Diskette controller indicates that the diskette has been removed between/during processes.\n\nSwitching diskettes may result in CORRUPTION OF A DISK ASSUMED TO BE THE TARGET.\n\nBE CERTAIN before retrying.
1557 The SOURCE has been copied to the TARGET in +:\ but hasn't been fully Verified. Cancel now?
1558 NOTE: Incomplete Read operation. Source diskette now in drive $:\ isn't finished reading, do you want to Cancel?
1559 WARNING: Incomplete Write operation. The TARGET diskette now in drive +:\ isn't finished writing. It is probably unusable at this point, do you want to Cancel?
1562 Insufficient hard disk space, or an error occurred opening temporary file.
1775 No application is associated with this file. Use File Manager to create an association.
1776 System was out of memory, executable file was corrupt, or relocations were invalid.
1778 File was not found.
1779 Path was not found.
1781 Attempt was made to dynamically link to a task, or there was a sharing or network-protection error.
1782 Library required separate data segments for each task.
1784 There was insufficient memory to start the application.
1786 Windows version was incorrect.
1787 Executable file was invalid. Either it was not a Windows application or there was an error in the .EXE image.
1788 Application was designed for a different operating system.
1789 Application was designed for MS-DOS 4.0.
1790 Type of executable file was unknown.
1791 Attempt was made to load a real-mode application (developed for an earlier version of Windows).
1792 Attempt was made to load a second instance of an executable file containing multiple data segments that were not marked read-only.
1795 Attempt was made to load a compressed executable file. The file must be decompressed before it can be loaded.
1796 Dynamic-link library (DLL) file was invalid. One of the DLLs required to run this application was corrupt.
1797 Application requires Microsoft Windows 32-bit extensions.
2048 INVALID ECC/CRC: Diskette data has been corrupted or media is no longer reliable.
2304 DMA ATTEMPTED ACROSS 64 K BOUNDARY: I/O subsystem reports an error transfering data between the disk controller and system RAM. Please report this problem to Accurate Technologies.
2816 Working...
3072 INVALID MEDIA TYPE: Media type could not be determined, or is not supported. Diskette may be unusable.
4096 BAD SECTOR OR SECTOR NOT FOUND: A sector could not be found at it's expected location, or it's sector ID field is invalid. (Could mean wrong media.)
8192 DISK CONTROLLER FAILURE: The Device i/o subsystem is unable to access the diskette controller, and reports hardware failure. Save any open files befor retrying! You should reset your system ASAP. A hardware problem may exist.
8193 Program Is Idle
8194 Initializing Disk Subsystem
8195 Reading SOURCE Diskette
8196 Formatting TARGET Diskette
8197 Writing TARGET Diskette
8198 Verifying TARGET Diskette
8199 Ready For TARGET Diskette
8200 Identifying Media Type
8201 Safety-Checking TARGET
8202 Diskette Copy Complete
8203 Successful Comparison
8204 Reserving Hard Disk Space
8205 Loading SOURCE Image
8206 Analyzing File System
8207 Logging Allocation Data
8208 Analyzing Media Properties
8209 Formatting Bad Track
8210 Converting Media Type
8211 Last Operation Failed
8212 Determining Allocations
8213 Waiting for Disk Change
8214 Change-Detect Timeout
8215 Change-Detect Cancelled
8216 Change Detected
8228 Format Complete
8229 Comparing Source to TARGET
8230 Creating File System
8450 ERROR INITIAIIZING ~:\
8451 DISK READ ERROR: ~:\ Track `` Side ^
8452 DISK FORMAT ERROR: +:\ Track `` Side ^
8453 DISK WRITE ERROR: +:\ Track `` Side ^
8454 DATA COMPARE ERROR: ~:\ Track `` Side ^
8456 ERROR TESTING MEDIA: ~:\ Track `` Side ^
8460 ERROR -- INSUFFICIENT HARD DISK SPACE AVAILABLE
16384 SEEK FAILURE: Drive failed seeking track to be Read/Written. Format may be corrupt or non-standard, or a hardware problem may exist.
21504 Creation of Common Dlg failed on call to DialogBox()
21505 Invalid structure size passed to Common Dlg
21506 Failure initializing Common Dlg. Possibly\n due to insufficient memory.
21507 Failure finding custom template for Common Dlg
21508 Instance handle not passed to Common Dlg
21509 Failure loading specified string
21510 Failure allocating memory for internal Common Dlg structure
21511 Failure locking memory for internal Common Dlg structure
21512 PD_RETURNDEFAULT flag was set but either the \nhDevMode or hDevNames field was nonzero
21513 Invalid filename passed to FileOpen or FileSave
21514 Buffer passed to Common Dlg too small to accomodate string
24595 Cancelling the Write operation in progress will probably leave the TARGET diskette in drive +:\ unusable. Do you want to Cancel? (Click 'No' to resume.)
24596 Diskette Copy operation has not finished? Do you want to Cancel?
24597 An image of the SOURCE diskette is being maintained in memory. Are you finished using this image?
24598 The SOURCE has been copied to the TARGET in drive +:\ but Verification is not yet complete. Do you want to Cancel? (Click 'No' to resume.)
24599 Unfinished Write Operation In Progress
24601 Disk Factory has not finished formatting TARGET diskette in drive +:\. It may be unusable if this operation isn't completed! Do you want ot Cancel? (Click 'No' to resume.)
24602 Unfinished Format Operation In Progress
24603 WARNING: TARGET diskette now in drive +:\ will be unusable if this operation is aborted! Click 'YES' to confirm.
24604 NOTE: SOURCE diskette now in drive $:\ will be not be copied if this operation is aborted! Click 'YES' to confirm. Click 'NO' to resume. Click 'CANCEL' to make another copy of this SOURCE.
24832 Data in memory has failed a checksum integrity test. This probably means that the data in RAM, or image file has been corrupted. If the SOURCE is available, it should be re-read. TARGET diskette in drive +:\ may be unusable.
24850 Compare Operation has not completed
24851 Do you want to Cancel the Compare operation now in progress? (Click 'NO' to resume.)
24852 Are you sure that you wish to ABORT without comparing your disk?
24853 An image of the SOURCE diskette is being maintained in memory. Do you want to erase this image?
24854 NOTE: Comparison of TARGET diskette now in drive +:\ has not completed. Do you wish to ABORT without comparing this disktte?
25106 Format Operation has not completed
25107 ABORT Format operation in progress acknowledged. (Click 'NO' to resume.)
25108 Are you sure that you wish to ABORT without formatting your disk?
25110 NOTE: Format of TARGET diskette now in drive +:\ has not completed. Do you wish to ABORT without formatting this disktte?
25344 VERIFICATION ERROR: Data on this diskette is different from the SOURCE or first diskette. If the SOURCE is available, it should be re-read. TARGET diskette may be unusable.
25856 An error has occurred attempting to open or re-open a diskette image file.
26880 NON-STANDARD FORMAT: The diskette in drive $:\ does not appear to be a standard DOS diskette, (it may be corrupted.) DiskFactory32 will reliably copy diskettes from other computer platforms (e.g., Mac, Unix, Atari SE) Please consult the documentation for important information.
26881 Source diskette File System data contains an invalid reference (a sub-directory entry contains a circular cluster reference.) Allocation cannot be accurately determined.\n
26882 ERROR: Invalid File System Data\n
26883 Non-DOS diskettes cannot be stored in allocated-only format.
26884 ERROR: Invalid Property Interpretation\n
26885 The diskettes you've chosen to compare are of different types. You can compare them if you wish, but they almost certainly won't match, and if they do, it will be meaningless, \n
26886 Warning: Meaningless Comparison Across Types\n
26887 The comparison target must be a diskette. An Image file may be used as a comparison source, but not as a comparison target.\n
26888 ERROR: Functionality not currently supported\n
26889 Errors were encountered attempting to determine the media type of the Source diskette. Disk may be unreadable.
26890 ERROR: Media Test Failure
26891 Errors were encountered attempting to determine the media type of the Compare target diskette. Disk may be unreadable.
26892 Image files cannot be formatted.\n
26893 Error Setting diskette Media Type. Subsequent diskette i/o will probably fail also. If this problem persists, you may need to restart your computer.
26894 ERROR: Setting Media Type Data
26895 Second Level Zero volume lock failed, releasing first lock.\n
26896 ERROR: Volume Locking Failure
26897 Drive appears as though it was already locked.\n
26898 Read errors occurred while analyzing diskette allocations. Since this makes it impossible to accurately determine allocations, the Allocated Only property will be disabled.
26899 Non-DOS diskettes cannot be converted to different media types.
26900 Error Converting Media Type
26901 Can't view the file system of a Non-DOS diskette.
26902 Error Viewing Image File System
26903 Warning: Not a Standard DOS/Windows File System
28672 All files and data on this diskette will be destroyed!
28673 WARNING: FORMAT DISKETTE
28676 DiskFactoryClass
28681 Combo Box Error: Out of Space
28682 ERROR: Too Many Drives
28928 TARGET IS TOO SMALL: Either size of files on the SOURCE exceeds TARGET storage capacity, or the number of root directory entrys in use on the SOURCE exceeds TARGET media root size. Conversion would result in data loss.
29440 UNFORMATTED DISKETTE: The diskette in drive $:\ is either unformatted, it's format type is not recognizable, or it's boot sector has been corrupted.
29952 Error Reading ~:\ Track `` Side ^ Sector @@
29953 The sector noted above is damaged, and the data it stored is unreadable. FAT Entries indicate that this sector is allocated to a file or directory. One or more files on the TARGET will probably be damaged. Do you wish to continue anyway?
30001 Win32 API Failure
30002 DiskFactroy32 Format Failure Notice
30003 Device I/O Control Error
31232 Drive ~:\ could not be Exclusively Locked. Open files on this drive, or directory access by applications can cause Exclusive Volume Locking to fail. Ignoring this error may impact system stability during the next i/o operation.
31488 Operation Incomplete
32768 DRIVE NOT READY: Please make sure that a diskette is properly inserted in the drive and that the door, if any, is completely closed.
33024 WARNING: The first track on the TARGET diskette in drive +:\ is identical to that of the SOURCE. You may have accidentally left the SOURCE, or a completed TARGET diskette in the drive. Are you sure you wish to use this diskette as the TARGET?
40960 Select SOURCE and TARGET drives.\nPlace diskette to be copied in the SOURCE drive.\nClick 'OK'
40961 \n\nReading data from SOURCE diskette in drive $:\
40962 Place TARGET diskette in drive +:\\n\nWARNING: All data on TARGET diskette will be erased.
40963 \n\nCreating duplicate diskette in drive +:\
40964 \nDiskette in drive +:\ may now be removed.\nTo copy new diskette click 'OK'.
40965 Diskette Copy Completed - +:\
41088 \n\nFormatting diskette\nin drive +:\
41089 Recovering Damaged Track
41090 Checking Allocation
41152 To Copy A Diskette...
41153 Ready For TARGET...
41154 Multiple Copies...
41155 Finished Copying...
41216 Select SOURCE and TARGET drives.\nPlace first diskette to be compared in the SOURCE drive.\nClick 'OK'
41217 \n\nReading data from FIRST diskette to Compare in drive $:\
41218 Place SECOND diskette to Compare in drive +:\\n\nData on this diskette will not be disturbed.
41219 \n\nComparing SECOND diskette to FIRST in drive +:\
41220 The diskette in drive +:\ is identical to the first, and may now be removed.\nTo Compare another diskette click 'OK'.
41221 Successful Diskette Comparison - +:\
41408 To Compare A Diskette...
41409 Ready For Second...
41410 Multiple Compares...
41411 Finished Comparing...
41472 Select TARGET drive.\nPlace diskette to be formatted in the TARGET drive.\nClick 'OK'
41473 \n\nFormatting diskette to in drive +:\
41474 .
41476 The diskette in drive +:\ has been formatted, and may now be removed.\nTo Format another diskette click 'OK'.
41477 Successful Diskette Format - +:\
41664 To Format A Diskette...
41665 Finished Formatting...
41666 Multiple Formats...
41667 Finished Formatting...
41669 Error setting media type parameters for drive ~:\
41670 Fatal Error: Unable to create a new i/o thread.
41672 Error obtaining device handle.
41673 Error obtaining event handle.
41674 Error obtaining drive default type information.\n
41675 Error setting media type parameters for drive ~:\.
53504 The Device i/o subsystem is either extremely busy or deadlocked. Time-outs have expired and i/o calls remain unserviced. DiskFactory32 has cancelled all pending transfers, in hopes of averting a really nasty crash.
53760 Failure was returned by the last call to DeviceIoControl. If this error persists, retrying or ignoring it may severely impact system stability.
53762 Format operation was not successfully completed.\n
53763 Click 'Cancel' to cancel the current operation and re-initialize; click 'Retry' to re-start the current phase; or click 'Retry' to continue\n
53764 User Selected Cancel
53765 NOTE: Copy Operation Failure
53766 NOTE: Compare Operation Failure
53767 NOTE: Format Operation Failure
53768 NOTE: Verify Operation Failure
53769 The operation indicated above failed to complete, and/or errors occured that probably compromised the integrity of the operation.
53770 Tbe I/O thread, under which the operation indicated above was performed, failed to exit properly (wait for exit timeout). The thread will now be terminated, but the system may be negatively impacted, and any open files should be saved before closing this warning.
53771 Last Operation Failed
53772 Last Operation Cancelled
54016 Invalid diskette operation attempted on image.
