Chip Hitware 7/Chip_Hitware_Vol_07.iso/chiphit7/multmedi/95symm/data.2/Program/Symmetrica.exe/string.txt

Text File | 1996-09-10 | 32KB | 648 lines

100    OLE initialization failed.  Make sure that the OLE libraries are the correct version.
128    Quickdraw
129    \nQdraw\nQuickdraw Drawing\nQuickdraw Drawing (*.qdr)\n.qdr\nQuickdraw.Drawing\nQuickdraw Drawing
130    Symmetrica
131    \n\nSymmetrica Drawing\nSymmetrica Drawing (*.syd)\n.syd\nSymmetrica.Drawing\nSymmetrica Drawing
132    \n\nSymmetrica Plot Sheet\nSymmetrica Plot Sheet (*.sps)\n.sps\nSymmetrica.Plot.Sheet\nSymmetrica Plot Sheet
136    \nQSheet\nQuickdraw Plot Sheet\nQuickdraw Plot Sheet (*.qps)\n.qps\nQuickdraw.Plot.Sheet\nQuickdraw Plot Sheet
140    Enter X,Y,Z locations and offsets here.\nLocation Input
141    Off
142    Diameter
143    Length
144    Cut Length
145    Node Label
146    Sill Ht:
147    Start Distance:
148    New containers cannot be created within read-only containers.
149    The new container directory could not be created.
150    The tree object is read-only and cannot be deleted.
151    The tree object is defined in a Tree Data File and cannot be deleted. The entry can only be deleted by removing the associated Tree Data File. The name of the associated Tree Data File follows.
152    Please specify a name for this pipe style. The name is used to identify and sort styles in the Pipe Styles list.
153    Please specify a diameter for this pipe style.
154    Please specify a type for this pipe style.
155    Please specify a line width for this pipe style. The line width describes how thick the pipe line will appear on paper, in points.
156    Warning! The color you have selected for this pipe style matches the background drawing color. Pipes drawn using this style will not be visible.
157    Attribute
158    Benchmark
159    A
160    Ellipse
161    Coverage Cell
162    Line Dimension
163    Group
164    Hide Area
165    Line
166    Main
167    Snaps
168    Input
169    Global Properties
170    Tools
171    Actions
172    Pipe Properties
173    Operations
174    View Tools
175    View
176    <No Change>
177    1/1024 Inch
178    00' 0.00",00' 0.00",00' 0.00"
179    1234567890
180    00' 0.00",00' 0.00",00' 0.00"
181    Cross Main
182    Branch Line
183    Riser Nipple
184    Feed Main
185    Arm-Over
186    Sprig
187    Drop
188    Underground
189    Feed Riser
190    Miscellaneous
191    Length:
192    °
193    Point
194    Polyline
195    GPM
196    Upright
197    Pendent
198    Sidewall
199    Other
200    File could not be opened.
201    Version:
202    Default Sprinkler
203    Default Symbol
204    #
205    Solid
206    Sprinkler
207    Stretch Box
208    Symbol
209    Could not create tree window.
210    Could not create tree control.
211    Text
212    Arc
213    R
214    S
215    T
216    V
217    ░
218    ▒
219    «
220    ⌐
221    ╝
222    ╜
223    ╛
224    Software\Sigma Solutions International, Inc.\Quickdraw\
225    Software\Software Engineering, Inc.\Symmetrica\
226    There was an error while attempting to create the following key in the registry.
227    M
228    ?
229    +
230    -
231    *
232    /
233    rot
234    (
235    =
236    E
237    Error
300    [file]
301    [page]
302    [pages]
303    [date]
304    [date:day]
305    [date:month]
306    [date:year]
307    [date:dayofweek]
308    [date:monthname]
309    [date:monthabbr]
310    [time]
311    [time:hour]
312    [time:minute]
313    [time:second]
314    [time:ampm]
315    [time:hour24]
316    [date:dayofweekabbr]
317    *
400    File Name
401    Page Number
402    Number of Pages
403    Date
404    Day of Month
405    Month (01-12)
406    Year
407    Day of Week
408    Month Name
409    Month Abbreviation
410    Time
411    Hour (01-12)
412    Minute
413    Second
414    AM/PM Indicator
415    Hour (00-23)
416    Day of Week Abbreviation
417    *
500    View
1000    Locate the first end of the pipe.
1002    Locate the second end of the pipe.
1004    Locate the first end of the continuous pipe.
1005    Locate the next point of the continuous pipe.
1007    Locate the first point of the running line.
1009    Locate the next point of the running line.
1011    Locate the first point of the line segment.
1013    Locate the second point of the line segment.
1015    Select a location for the sprinkler head.
1023    Locate the start of the line crossing selection.
1025    Locate the end of the line crossing selection.
1039    Sets the drawing color in default properties elements.\nDefault Element Color
1073    Aa Bb Cc 123\nThe quick brown fox jumps over the lazy dog.
1081    Roll the view to the left.\nRoll Left
1082    Pitch the view up.\nPitch Up
1083    Roll the view to the right.\nRoll Right
1084    Rotate the view to the left around the true Z axis.\nRotate Left
1086    Rotate the view to the right around the true Z axis.\nRotate Right
1087    Yaw the view to the left.\nYaw Left
1088    Pitch the view down.\nPitch Down
1089    Yaw the view to the right.\nYaw Right
1091    Sets the line weight in default properties elements.\nDefault Line Weight
1100    Sets the layer in default properties elements.\nDefault Layer
1206    Sets default properties elements to use the layer color instead of the element color.\nUse Layer Color by Default
1207    Calculator
1209    Sets the pipe type in default properties elements.\nDefault Pipe Type
1210    Sets the pipe diameter in default properties elements.\nDefault Pipe Diameter
1211    There was an error reading the Plot Sheet file. Please verify the path to the file.
32771    Zoom to selected objects.
32772    Set the view to the selected area.
32773    Zoom in at the mouse location
32774    Zoom out at the mouse location.
32775    Snap selected objects to nearest other objects.
32776    Round selected elements.\nRound
32777    Specify the exact offset to move the selection.
32778    Specify the exact offset to copy the selection.
32779    Show or hide the drawing tools toolbar.\nTools Toolbar
32780    Adds a single Pipe to the drawing.\nPipe
32782    Adds a series of Pipe sections.\nContinuous Pipe
32783    Adds a sprinkler head to a pipe.\nSprinkler Head
32785    Adds a wall to the drawing.\nWall
32786    Adds a series of walls.\nRunning Wall
32787    Adds a door opening to a wall.\nDoor Opening
32788    Fills a walled area with ceiling tiles.\nCeiling Tile Grid
32789    Replaces a ceiling tile with a diffuser.\nDiffuser
32790    Replaces a ceiling tile with a light.\nLight
32791    Adds a single line segment to the drawing.\nLine Segment
32792    Adds a series of line segments.\nRunning Line
32793    Adds text box.\nText
32794    Restore selection cursor.\nSelect
32796    Scale the view so that all of the drawing fits in the window.\nZoom All
32797    Increase view magnification.\nZoom In
32798    Decrease view magnification.\nZoom Out
32799    Redraw the drawing window\nRedraw
32800    Turns the grid lines on and off.\nVisible Grid
32801    Edits properties of the current selection.\nProperties
32802    Add a Main.\nMain
32803    Add a series of Mains\nContinuous Main
32804    The cursor will snap to an insertion point of the nearest object.\nLocation Snap
32805    Selects all drawing elements.\nSelect All
32806    The selection is joined into a group.\nGroup The Selection
32807    Splits selected groups into component elements.\nSplit Groups
32808    Snap selection to object center.\nCenter Snap
32809    Snap selection perpendicular to an object.\nPerpendicular Snap
32810    Select elements that intersect a line segment.\nCrossing Selection
32811    Toggles the selection state of all drawing elements.
32812    Moves the benchmark to a new location.\nMove Benchmark
32813    Locate the new position for the benchmark.
32814    Selects elements intersected by the edges of a box.
32815    Locate the start of the rectangular crossing selection.
32816    Locate the end of the rectangular crossing selection.
32817    Removes the selection from all elements.
32818    The cursor will snap to the center of the nearest object.\nCenter Snap
32819    The cursor will snap perpendicular to the nearest object.\nPerpendicular Snap
32820    Turns off cursor snapping.\nFree-hand
32821    The cursor will snap to an even 45 degree interval from the reference.\nOrtho Snap
32822    Show or hide the snaps toolbar.\nSnaps Toolbar
32823    Show or hide the input toolbar.\nInput Toolbar
32824    Enter copy offset or locate it with the cursor.
32826    Enter move offset or locate it with the cursor.
32827    Adds a region that hides pipes and fittings.\nHide Area
32828    Locate the first corner of the area to hide.
32829    Locate the opposite corner of the area to hide.
32830    Zoom to a rectangular area of the view.\nZoom Rectangle
32831    Locate the start of the rectangular zoom area.
32832    Locate the opposite corner of the area to zoom.
32835    Adds a rectangle of lines.\nRectangle
32836    Locate the first corner of the rectangle.
32837    Locate the opposite corner of the rectangle.
32838    Set default properties for mains.
32839    Set default properties for pipes.
32840    Set default properties for sprinkler heads.
32841    Set default properties for walls.
32842    Set default properties for door openings.
32843    Set default properties for ceiling tile grids.
32844    Set default properties for diffusers.
32845    Set default properties for lights.
32846    Set default properties for line segments.
32847    Set default properties for text.
32848    Set default properties for hide areas.
32849    Add all benchmarks to the selection.
32850    Add all mains to the selection.
32851    Add all pipes to the selection.
32852    Add all sprinklers to the selection.
32853    Set default properties for the benchmark.
32854    Add all walls to the selection.
32855    Add all wall openings to the selection.
32856    Add all ceiling tile grids to the selection.
32857    Add all diffusers to the selection.
32858    Add all lights to the selection.
32859    Add all line segments to the selection.
32860    Add all text to the selection.
32861    Add all hide areas to the selection.
32862    Add all groups to the selection.
32863    Create a grid of pipes and sprinkler heads.
32864    Adds a coverage cell to the drawing.\nCoverage Cell
32865    Adds a coverage cell.\nCoverage Cell
32866    Set default properties for coverage cell.
32867    Locate the first corner of the coverage cell.
32868    Locate the opposite corner of the coverage cell.
32869    Add all coverage cells to the selection.
32870    Set default properties for groups.
32871    Adds a series of pipes, with sprinklers placed where appropriate.\nAuto Pipe/Sprinkler
32872    Locate the first end of the pipe.
32873    Locate the sprinkler head and the next end of the pipe.
32874    Split selected coverage cells into component elements.\nSplit Coverage Cells
32875    Restores the previous view.\nLast View
32876    Locate the first corner of the text box.
32877    Locate the opposite corner of the text box.
32878    View the drawing from the top.\nPlan View
32879    View the drawing in an isometric rotation.\nIsometric View
32881    Redraw the active view window.
32882    Show or hide the view setting tools.\nView Tools
32883    View the front side of the drawing.\nFront View
32885    View the right side of the drawing.\nRight Side View
32887    View the back side of the drawing.\nBack View
32888    View the left side of the drawing.\nLeft Side View
32889    Set default properties for dimensioning.
32890    Adds a line dimension to the drawing.\nDimension
32891    Adds a line dimension.\nDimension
32892    Locate the first end of the distance to dimension.
32893    Locate the other end of the distance to dimension.
32894    Locate the position of the dimension line.
32896    Locate the first corner of the area to dimension.
32897    Locate the opposite corner of the area to dimension.
32898    Locate the position of the dimension line.
32900    Adds a series of dimension lines to all elements in an area.\nRunning Dimension
32901    Import a drawing from AutoCAD.\nImport
32902    Export a drawing to AutoCAD.\nExport
32903    Displays a dialog for managing drawing layers.\nLayers...
32904    Creates a symbol out of the selection.\nCreate A Symbol...
32905    Adds an arc to the drawing.\nArc
32906    Locate the center of the arc.
32907    Locate the start of the arc.
32908    Locate the end of the arc.
32909    Adds a circle to the drawing.\nCircle
32910    Locate the center point of the circle.
32911    Locate a point on the perimeter of the circle.
32912    Set default properties for arcs.
32913    Set default properties for ellipses.
32914    Adds a polyline to the drawing.\nPolyline
32915    Set default properties for polylines.
32916    Locate the beginning of the polyline.
32917    Locate the next vertex of the polyline.
32918    Split selected polylines into component elements.\nSplit Polylines
32919    Change the page printing options\nPage Setup
32922    Makes a grid of duplicates of the selection.\nArray...
32923    Update product licensing information.
32925    Setup drawing and viewing options.\nDrawing Settings
32927    Turns the benchmark on and off.\nBenchmark
32928    Toggles the behaviour that causes the benchmark to follow your work.\nAuto Benchmark
32929    Turn cursor input rounding on and off.\nRounding
32930    Show or hide the view toolbar.\nView Toolbar
32931    Display properties for the selection.\nProperties
32932    Delete the selection.\nDelete
32933    Creates a plain box in the tree.\nBox
32934    Creates a filing cabinet in the tree.\nFiling Cabinet
32935    Creates a box for couplings in the parts tree.\nCoupling Box
32936    Creates a box for crosses in the parts tree.\nCross Box
32937    Creates a box for custom fittings in the parts tree.\nCustom Fitting Box
32938    Creates a box for 11╝░ elbows in the parts tree.\n11╝ Degree Elbow Box
32939    Creates a box for 22╜░ elbows in the parts tree.\n11╝ Degree Elbow Box
32940    Creates a box for 45░ elbows in the parts tree.\n45 Degree Elbow Box
32941    Creates a box for 90░ elbows in the parts tree.\n90 Degree Elbow Box
32942    Creates a box for flow devices in the parts tree.\nFlow Device Box
32943    Creates a box for hangers in the parts tree.\nHanger Box
32944    Creates a box for joint adapters in the parts tree.\nJoint Adapter Box
32945    Creates a locker in the tree.\nLocker
32946    Creates a box for riser nipples in the parts tree.\nRiser Nipple Box
32947    Creates a bundle for pipes in the parts tree.\nPipe Bundle
32948    Creates a box for pumps in the parts tree.\nPump Box
32949    Creates a safe in the tree.\nSafe
32950    Creates shelves in the tree.\nShelves
32951    Creates a box for sprinklers in the parts tree.\nSprinkler Box
32952    Creates a tool box in the tree.\nTool Box
32953    Creates a box for tees in the parts tree.\nTee Box
32954    Creates a truck in the tree.\nTruck
32955    Creates a box for valves in the parts tree.\nValve Box
32956    Creates a warehouse in the tree.\nWarehouse
32958    Creates a box for caps in the parts tree.\nCap Box
32961    Split selected symbols into component elements.\nSplit Symbols
32963    Provides a means to reclaim system resources.\nClean House
32964    Apply text labels to all selected pipes.\nLabel Pipes...
32965    Apply pipe labels to all selected nodes.\nLabel Nodes...
32966    Show or hide the global properties toolbar.\nGlobal Properties Toolbar
32967    Posted by the frame in response to the user changing the default layer.
32968    Posted by the frame in response to the user changing the default line weight.
32969    The cursor will snap to intersections on the nearest object.\nIntersection Snap
32970    The cursor will snap to the nearest point on the nearest object.\nNear Snap
32971    Set default properties for pipe labels.
32972    Add all pipe labels to the selection.
32973    Add all arcs to the selection.
32974    Add all ellipses to the selection.
32975    Add all polylines to the selection.
32976    Add all dimensions to the selection.
32977    Add all Branch Lines to the selection.
32978    Add all Cross Mains to the selection.
32979    Add all Riser Nipples to the selection.
32980    Add all Feed Mains to the selection.
32981    Add all Arm-Overs to the selection.
32982    Add all Sprigs to the selection.
32983    Add all Drops to the selection.
32984    Add all Underground pipes to the selection.
32985    Add all Feed Risers to the selection.
32986    Add all miscellaneous pipes to the selection.
32987    Add all pipes to the selection.
32989    Intersections between all selected elements will be repaired.\nCleanup Intersections
32990    Show or hide the operations toolbar.\nOperations Toolbar
32991    Show or hide the actions toolbar.\nActions Toolbar
32992    Select elements that are completely inside a rectangle.\nAll In Rectangle Selection
32993    Select elements that are partially inside a rectangle.\nPartially In Rectangle Selection
32996    Locate the opposite corner of the area to select.
32997    Locate the first corner of the area to select.
32998    Locate the first corner of the area to select.
32999    Locate the opposite corner of the area to select.
33002    Setup the display format of numeric values.\nFormat Setup
33003    Locate the beginning of the wall.
33004    Locate the opposite end of the wall segment.
33005    Locate the beginning of the continuous wall.
33006    Locate the end of the wall segment.
33007    Sets the view to look at the benchmark.\nLook At Benchmark
33008    Locate the wall position for this door.
33009    Set default properties for window openings.
33010    Adds a window opening to a wall.\nWindow Opening
33011    Adds a rectangle of walls.\nWall Rectangle
33012    Locate the wall position for this window.
33013    Locate the first corner of the wall rectangle.
33014    Locate the opposite corner of the wall rectangle.
33015    Adds an instance of a symbol to the drawing.\nSymbol
33016    Adds a point to the drawing.\nPoint
33017    Set default properties for symbols.
33018    Set default properties for points.
33019    Add all symbols to the selection.
33020    Add all points to the selection.
33021    Select a location for the symbol.
33022    Select a location for the point.
33023    Displays a dialog for managing styles of pipes.\nPipe Styles...
33024    Restarts the last used drawing command.\nRestart Command
33025    Show or hide the pipe properties toolbar.\nPipe Properties Toolbar
33026    Remove all benchmarks from the selection.
33027    Remove all coverage cells from the selection.
33028    Remove all sprinklers from the selection.
33029    Remove all arcs from the selection.
33030    Remove all ellipses from the selection.
33031    Remove all line segments from the selection.
33032    Remove all polylines from the selection.
33033    Remove all text from the selection.
33034    Remove all dimensions from the selection.
33035    Remove all hide areas from the selection.
33036    Remove all groups from the selection.
33037    Remove all walls from the selection.
33038    Remove all ceiling tile grids from the selection.
33039    Remove all diffusers from the selection.
33040    Remove all lights from the selection.
33041    Remove all Arm-Overs from the selection.
33042    Remove all Branch Lines from the selection.
33043    Remove all Cross Mains from the selection.
33044    Remove all Drops from the selection.
33045    Remove all Feed Mains from the selection.
33046    Remove all Feed Risers from the selection.
33047    Remove all miscellaneous pipes from the selection.
33048    Remove all Riser Nipples from the selection.
33049    Remove all Sprigs from the selection.
33050    Remove all Underground pipes from the selection.
33051    Remove all pipes from the selection.
33052    Remove all symbols from the selection.
33053    Remove all points from the selection.
33054    Show or hide the calculator input tool.\nCalculator
33057    Selects Degrees for input and display of angle values on the calculator.
33058    Selects Radians for input and display of angle values on the calculator.
33059    Selects Grads for input and display of angle values on the calculator.
33060    Selects Rectangular Coordinates for input and display of vector values on the calculator.
33061    Selects Polar Coordinates for input and display of vector values on the calculator.
33062    Selects Millimeters for the base of unit values on the calculator.
33063    Selects Centimeters for the base of unit values on the calculator.
33064    Selects Kilometers for the base of unit values on the calculator.
33065    Selects Inches for the base of unit values on the calculator.
33066    Selects Feet for the base of unit values on the calculator.
33067    Selects Yards for the base of unit values on the calculator.
33068    Selects Miles for the base of unit values on the calculator.
33069    Selects Meters for the base of unit values on the calculator.
33070    Selects Points for the base of unit values on the calculator.
33096    Enter a point location for the calculator.
33097    Locate the start of the vector for the calculator.
33098    Locate the end of the vector for the calculator.
33111    View/edit plot sheet layout.\nSheet Layout
33112    Setup plotting options.\nPlot Setup
33113    Set default properties for details.
33114    Set default properties for view elements.
33115    Adds a view of another drawing.\nView
33116    Locate the first corner of the view element rectangle.
33117    Locate the opposite corner of the view element rectangle.
33118    Show capabilities of video and printer output devices.\nDevice Capabilities
33446    Properties
33447    Pipe Grid Wizard
33448    The file extension is not recognized. The program is unable to export to the file you have selected.
33449    The file extension is not recognized. The program is unable to import from the file you have selected.
33450    AutoCAD Drawing (*.dwg)|*.dwg|AutoCAD Export (*.dxf)|*.dxf|All Files (*.*)|*.*||
33451    AutoCAD Drawing (*.dwg)|*.dwg|AutoCAD Export (*.dxf)|*.dxf||
33452    The drawing file to import could not be opened.
33453    Importing AutoCAD drawing elements.
33454    Exporting AutoCAD drawing elements
33455    AutoCAD drawing import completed.
33456    AutoCAD drawing export completed.
33457    Warning! Temporary layers are not saved when you select Save or Save As.
33458    The layer name you have chosen is already in use. Each layer must have a unique name.
33459    A layer must have a name. The name must be unique to each layer.
33460    Converting Block to Symbol.
33461    A symbol must have a name. The name must be unique to each symbol.
33462    The symbol name you have chosen is already in use. Press OK to replace the existing symbol with the new data.\n\nNote: This operation cannot be undone.
33463    There was an error positioning to an entity in the drawing to import.
33464    There was an error getting data about an import entity.
33465    OK
33466    Preparing to import AutoCAD drawing.
33467    Preparing to export AutoCAD drawing.
33468    - End of List -
33469    You must enter a vertex location.
33470    An error occurred while preparing to export the drawing.\n\nThe most likely cause is a bad or missing TEMPLATE.DWG file. This is an empty .DWG file which is used to set the initial state of drawing parameters.
33471    Text File (*.txt)|*.txt|All Files (*.*)|*.*||
33472    Converting Symbol to Block.
33473    SENTINEL SuperPro Message. Success.
33474    SENTINEL SuperPro Error! Invalid Packet.
33475    SENTINEL SuperPro Error! Unit not found.
33476    SENTINEL SuperPro Error! Access denied.
33477    SENTINEL SuperPro Error! Invalid memory address.
33478    SENTINEL SuperPro Error! Invalid access code.
33479    SENTINEL SuperPro Error! Port is busy.
33480    SENTINEL SuperPro Error! Write not ready.
33481    SENTINEL SuperPro Error! Invalid function code.
33482    SENTINEL SuperPro Error! No port installed.
33483    SENTINEL SuperPro Error! Already zero.
33484    SENTINEL SuperPro Error! Driver not installed.
33485    SENTINEL SuperPro Error! Communications error.
33486    SENTINEL SuperPro Error! Version not supported.
33487    SENTINEL SuperPro Error! OS environment not supported.
33488    SENTINEL SuperPro Error! Query too long.
33489    SENTINEL SuperPro Error! Driver is busy.
33490    SENTINEL SuperPro Error! Port allocation failure.
33491    SENTINEL SuperPro Error! Port release failure.
33492    SENTINEL SuperPro Error! Acquire port timeout.
33493    SENTINEL SuperPro Error! Signal not supported.
33494    SENTINEL SuperPro Error! Init not called.
33495    SENTINEL SuperPro Error! Driver type not supported.
33496    SENTINEL SuperPro Error! Fail on driver comm.
33497    SENTINEL SuperPro Error! API status unavailable.
33498    SENTINEL SuperPro Error! Invalid status.
33499    SENTINEL SuperPro Error! The hardware key driver reported an error.
33500    The SENTINEL SuperPro key has reached its limit. No new products can be authorized using temporary passwords until the key is reset by the software distributor. You can, however, continue to authorize new products using permanent passwords.
33501    QD
33502    QL
33503    SY
33504    SP
33506    The licensing information you have entered is valid. However, you will have to exit the program and restart in order for the changes to take effect.
33508    Drawing and View Settings
33509    Millimeter
33510    Centimeter
33511    Kilometer
33512    Inch
33513    Foot
33514    Yard
33515    Mile
33516    Meter
33517    Point
33518    mm
33519    cm
33520    km
33521    "
33522    '
33523    yd
33524    Mi
33525    m
33526    pt
33527    There is no data on the clipboard which can be pasted into the drawing.
33528    The number of rows in the array must be at least 1.
33529    The number of columns in the array must be at least 1.
33530    The drag and drop action cannot be completed. The data is not supported by the target of the operation.
33531    The drawing object name you have entered is not valid. The name may not be blank and must only consist of characters that can be used in a file name.
33532    The destination file is a hidden, read only, or system file. The save operation cannot continue.
33533    The destination file is a directory. The save operation cannot continue.
33534    An object with this name already exists. If you continue, the existing object will be lost. This operation cannot be undone.\n\nAre you sure you want to overwrite this object?
33535    The drawing object could not be saved. The most likely causes are an invalid file name or a full disk. Please insure that you only use characters that can be used in a file name when naming drawing objects.
33536    You are about to delete this object from the tree. This action cannot be undone.\n\nAre you sure you want to permanently remove this drawing object from the tree?
33537    You are about to delete this container and all of its contents from the tree. This action cannot be undone.\n\nAre you sure you want to permanently remove this container and all of its contents from the tree?
33538    The drawing object file cannot be deleted. It may be in use by another application or you may not have permission to delete the file.
33539    The drag and drop operation you have attempted is not enabled . You must properly license this software in order to use this feature.
33540    Your system is running low on memory. Redo data has been discarded to reclaim memory to complete the current operation. You should close other documents and other programs to free some system resources. It is highly recommended that you save your work as soon as possible.
33541    Your system is running extremely low on memory! There is not enough memory to complete the current operation. This may have serious side effects. If possible, you should save your work to a new file to avoid corrupting good data.
33542    Your system is running low on memory. Undo data has been discarded to reclaim memory to complete the current operation. You should close other documents and other programs to free some system resources. It is highly recommended that you save your work as soon as possible.
33543    Your system is running low on memory. Symbols that are not used in the drawing have been discarded to reclaim memory to complete the current operation. You should close other documents and other programs to free some system resources. It is highly recommended that you save your work as soon as possible.
33544    The house cleaning operation successfully recovered some system resources. You can also close other documents and programs to make more system resources available.
33545    The house cleaning operation did not recover any system resources. You can also close other documents and programs to make more system resources available.
33546    Your system is running low on memory. Some illogical elements were discarded from the drawing to reclaim memory to complete the current operation. You should close other documents and other programs to free some system resources. It is highly recommended that you save your work as soon as possible.
33547    There is a hardware key present with the following ID number.
33548    No hardware key has been detected.
33549    The key is functioning properly.
33550    The key is not functioning properly. Please contact the distributor of this software for a replacement.
33551    The key is disabled because it was removed while the program was running. Restart the program to re-enable the key.
33552    The hardware key could not be detected. Some product features have been disabled as a result.\n\nInsert the key and restart the program to re-enable protected product features.
33553    Quickdraw Lite
33554    2.2
33555    1.3
33556    Number Format Settings
33557    mm▓
33558    cm▓
33559    km▓
33560    in▓
33561    ft▓
33562    yd▓
33563    mi▓
33564    m▓
33565    pt▓
33566    The container directory cannot be deleted. It may be in use by another application or you may not have permission to delete the directory. It is also possible that the directory is not empty.
33567    Symmetrica"!
33568    Symmetrica"! Pro
57344    Symmetrica
57345    For Help, press F1
57346    Select an object on which to get Help
57600    Create a new document\nNew
57601    Open an existing document\nOpen
57602    Close the active document\nClose
57603    Save the active document\nSave
57604    Save the active document with a new name\nSave As
57605    Change the printing options\nPage Setup
57606    Change the printer and printing options\nPrint Setup
57607    Print the active document\nPrint
57609    Display full pages\nPrint Preview
57610    Update the container to show any changes\nUpdate
57611    Save a copy of the active document with a new name\nSave Copy
57616    Open this document
57617    Open this document
57618    Open this document
57619    Open this document
57620    Open this document
57621    Open this document
57622    Open this document
57623    Open this document
57624    Open this document
57625    Open this document
57632    Erase the selection\nErase
57633    Erase everything\nErase All
57634    Copy the selection and put it on the Clipboard\nCopy
57635    Cut the selection and put it on the Clipboard\nCut
57636    Find the specified text\nFind
57637    Insert Clipboard contents\nPaste
57640    Repeat the last action\nRepeat
57641    Replace specific text with different text\nReplace
57642    Select the entire document\nSelect All
57643    Undo the last action\nUndo
57644    Redo the previously undone action\nRedo
57648    Open another window for the active document\nNew Window
57649    Arrange icons at the bottom of the window\nArrange Icons
57650    Arrange windows so they overlap\nCascade Windows
57651    Arrange windows as non-overlapping tiles\nTile Windows
57652    Arrange windows as non-overlapping tiles\nTile Windows
57653    Split the active window into panes\nSplit
57664    Display program information, version number and copyright\nAbout
57665    Quit the application; prompts to save documents\nExit
57666    List Help topics\nHelp Index
57668    Display instructions about how to use help\nHelp
57669    Display help for clicked on buttons, menus and windows\nHelp
57670    Display help for current task or command\nHelp
57680    Switch to the next window pane\nNext Pane
57681    Switch back to the previous window pane\nPrevious Pane
59136    EXT
59137    CAP
59138    NUM
59139    SCRL
59140    OVR
59141    REC
59392    Show or hide the main toolbar\nMain Toolbar
59393    Show or hide the status bar\nToggle Status Bar
61184    Change the window size
61185    Change the window position
61186    Reduce the window to an icon
61187    Enlarge the window to full size
61188    Switch to the next document window
61189    Switch to the previous document window
61190    Close the active window and prompts to save the documents
61202    Restore the window to normal size
61203    Activate Task List
61215    Activate this window
61445    Close print preview mode\nCancel Preview
61446    Lengths
61447    Diameters
61448    Paper Distances