Chip 2003 December

home *** CD-ROM | disk | FTP | other *** search

/ Chip 2003 December / CMCD1203.ISO / Software / Demo / SecureNet / Crysta~1.cab / sscrc.dll.2CDDBB76_75A7_11D5_A847_00B0D0428C0C / string.txt next >

Wrap

Text File | 2000-10-02 | 49.3 KB | 1,398 lines

1645 IDS_TT_QUALITYAXES_MANUAL_LOWBREAK_SLIDER 2000 Choose a chart type... 2001 Data Analyzer 2002 Gallery 2003 Custom 2004 Column 2005 Bar 2006 Line 2007 Area 2008 Pie 2009 Scatter 2010 Bubble 2011 Surface 2012 Histogram 2013 Logic Server Main predicate failure. Unable to perform data anaylsis. 2014 Logic Server problem. Unable to perform data analysis. 2015 Fail to initialize the Excel interface. Unable to work with Excel. 2016 %.1f%% Confidence 2017 BiPolar data checking failure. 2018 3D Bar 2019 3D Cube 2020 3D Cut Corner 2021 3D Diamond 2022 3D Octagon 2023 3D Pyramid 2024 3D Square 2025 3D Row Area 2026 3D Row Line 2027 3D Row Step 2028 3D Column Area 2029 3D Column Line 2030 3D Column Step 2031 3D Honey Comb Surface 2032 3D Model Surface 2033 3D Surface 2034 3D Scatter 2035 Area 2036 Dual Y Area 2037 Bipolar Area 2038 Dual Y Bipolar Area 2039 Stacked Area 2040 Dual Y Stacked Area 2041 Bipolar Stacked Area 2042 Dual Y Bipolar Stacked Area 2043 Unknown Chart type 2044 Percent Area 2045 Stacked Bar 2046 Dual Y Stacked Bar 2047 Bipolar Stacked Bar 2048 Dual Y Bipolar Stacked Bar 2049 Side by Side Bar 2050 Dual Y Side by Side Bar 2051 Bipolar Side by Side Bar 2052 Dual Y Biploar Side by Side Bar 2053 Percent Bar 2054 Line 2055 Dual Y Line 2056 Bipolar Line 2057 Dual Y Bipolar Line 2058 Stacked Line 2059 Dual Y Stacked Line 2060 Bipolar Stacked Line 2061 Dual Y Biploar Stacked Line 2062 Percent Line 2063 Pie 2064 Ring Pie 2065 Multiple Pie 2066 Proportional Multiple Pie 2067 Multiple Ring Pie 2068 Pie Bar 2069 Ring Pie Bar 2070 Histogram 2071 Spectral Map 2072 Polar 2073 Scatter 2074 Dual Y Scatter 2075 Stock Market 2076 Dual Y Stock Market 2077 Contour Plot 2078 Box Plot 2079 Box Plot Table 2080 Save the current gradient as: 2081 Enter the new name: 2082 Enter the new name: 2083 Copy of %s 2084 Custom Wash 2085 MS-Office 2086 Wizard 2087 General 2088 Scales 2089 Labels 2090 Grids 2091 Data Axis 2092 Data2 Axis 2093 X Axis 2094 Show a Zero Plane on the Chart 2095 Major Gridlines 2096 Minor Gridlines 2097 Interval Value: 2098 Count Value: 2099 Numbers 2100 General format cells have no specific number format. 2101 Wash Name: 2102 Use Thousand Separator (%s) 2103 Quadrant Lines 2104 Group Axis 2105 Series Axis 2106 Axis on Left Wall 2107 Axis on Right Wall 2108 Axis on Left 2109 Axis on Right 2110 Axis on Top 2111 Axis on Bottom 2112 Z Axis 2113 Draw Series in Reverse Order 2114 Use Manual Number of Series 2115 Show Zero Plane in the Cube 2116 Don't Show First Series Label 2117 Don't Show Last Series Label 2118 Layout 2119 Data Labels 2120 Look 2121 Display Status 2122 Split Pie 2123 Data2 Options 2124 Waterfall 2125 Automatic 2126 Color by Series 2127 Color by Groups 2128 Exact Color by Height 2129 Color by Increment 2130 Series Axis 2132 Color by Area (Series) 2133 Color by Segment (Group) 2134 Color by Height 2135 Ticks 2136 The input data set is empty. 2137 Above Bubble 2138 Below Bubble 2139 Centered on Bubble 2140 Left of Bubble 2141 Right of Bubble 2142 (Y) Value 2143 (X,Y) Value 2144 Bubble Size 2145 (X,Y, Bubble Size) 2146 Y-Error Bar 2147 X-Axis 2148 Above Marker 2149 Below Marker 2150 Centered on Marker 2151 Left of Marker 2152 Right of Marker 2153 (Y) Value 2154 (X,Y) Value 2155 Color by Line (Series) 2156 Smooth Area 2157 Connect Bubbles with Lines 2158 Please select the series changes should apply to 2159 Error Bars 2160 X - Error Bars 2161 Y - Error Bars 2162 Trendline 2163 Linear (%s) 2164 Logarithmic (%s) 2165 Polynomial (%s) 2166 Power (%s) 2167 Exponential (%s) 2168 Moving Average (%s) 2169 Actual Count 2170 Percent of total 2171 Series Options... 2172 Lighting Presets 2173 Templates 2174 Enter the Lighting Preset Name... 2175 Preset Name: 2176 Default Wash 2177 Preset Name: 2178 Enter the Gradient Preset Name... 2179 3D View Angles 2180 Enter a Preset Name... 2181 Pictures 2182 Rotate 2183 Pan 2184 Walls 2185 Move 2186 IDS_PATTERN0 2187 IDS_PATTERN1 2188 IDS_PATTERN2 2189 IDS_PATTERN3 2190 IDS_PATTERN4 2191 IDS_PATTERN5 2192 IDS_PATTERN6 2193 IDS_PATTERN7 2194 IDS_PATTERN8 2195 IDS_PATTERN9 2196 IDS_PATTERN10 2197 IDS_PATTERN11 2198 IDS_PATTERN12 2199 IDS_PATTERN13 2200 IDS_PATTERN14 2201 IDS_PATTERN15 2202 IDS_PATTERN16 2203 IDS_PATTERN17 2204 IDS_PATTERN18 2205 IDS_PATTERN19 2206 IDS_PATTERN20 2207 IDS_PATTERN21 2208 IDS_PATTERN22 2209 IDS_PATTERN23 2210 IDS_PATTERN24 2211 IDS_PATTERN25 2212 IDS_PATTERN26 2213 IDS_PATTERN27 2214 IDS_PATTERN28 2215 IDS_PATTERN29 2216 IDS_PATTERN30 2217 IDS_PATTERN31 2218 IDS_PATTERN32 2219 IDS_PATTERN33 2220 IDS_PATTERN34 2221 IDS_PATTERN35 2222 IDS_PATTERN36 2223 IDS_PATTERN37 2224 IDS_PATTERN38 2225 IDS_PATTERN39 2226 IDS_PATTERN40 2227 IDS_PATTERN41 2228 IDS_PATTERN42 2229 IDS_PATTERN43 2230 IDS_PATTERN44 2231 IDS_PATTERN45 2232 IDS_PATTERN46 2233 IDS_PATTERN47 2234 IDS_PATTERN48 2235 IDS_PATTERN49 2236 IDS_PATTERN50 2237 IDS_PATTERN51 2238 IDS_PATTERN52 2239 IDS_PATTERN53 2240 IDS_PATTERN54 2241 IDS_PATTERN55 2242 Copy of 2243 %s%s (%d) 2244 Do you want to overwrite %s ? 2245 Enter 3D Viewing Angle Preset Name... 2246 Preset Name: 2249 Use Manual Number of Series 2252 Rectangular Riser 2253 Round Column 2254 Cone / Pyramid 2255 Floating Cube 2256 Floating Sphere 2257 Rectangle 2258 X-Shape 2259 Plus Symbol Thin 2260 Circle 2261 Diamond 2262 Triangle 2263 Plus Symbol Thick 2264 Square 2265 Star 2266 Beveled Box 2267 Reverse Beveled Box 2268 Waterfall 2269 The selection list must not be empty. 2270 Split Value out of range 2271 This beta version has expired, please purchase a release version from Three D Graphics ! 2272 Gradient... 2273 Invalid entry: You have to enter a value between %s and %s 2274 This Chart has negative data or zero. Logarithmic scale can't dislay a chart with negative data. Set the scale minimum and maximum to manual and set them to values greater than zero. 2275 Custom Rows Control 2276 Custom Cols Control 2277 Command Button Control 2278 Custom Static Control 2279 Custom Combo Box Control 2280 Custom Static Control Row 2281 Custom Static Control Col 2282 Custom Scatter Col 2283 Custom Bubble Col 2284 Edit Control 2285 Texture... 2286 Picture... 2287 Pattern... 2288 Number 2289 Lighting Settings 2290 Transparent 2291 Testing tooltips... 2292 Choose a gradient to apply to the selected text 2293 Choose a gradient to apply to the selected areas 2294 Choose a Gradient to apply to the selected lines 2295 Choose a texture to apply to the selected text 2296 Choose a texture to apply to the selected lines 2297 Choose a texture to apply to the selected areas 2304 Support Files 2305 Textures 2306 MS Sans Serif 2307 Analyze Data 2308 Update Data Range 2309 Series 2310 Group 2311 Labels 2312 Top Value 2313 Bottom Value 2314 Top Offset 2315 Bottom Offset 2316 Show Range Objects 2317 Total 2318 SubTotal 2319 Extra 2320 Data 2321 Hide Range Objects 2322 Arrange Icons 2323 Arrange All 2324 Split Value 1 2325 Split Value 2 2326 Split Value 3 2327 Remainder 2328 Show Split Values 2329 Hide Split Values 2330 Point 2331 Not enough memory to perform this operation 2332 Write error--possible disk full condition 2333 File format invalid 2334 Filter dll missing 2335 Unknow error 2336 Gradients 2337 Unable to open the wash file 2338 Invalid wash file 2339 You are about to overwrite existing data. Continue? 2340 Font 2341 Line 2342 Fill 2343 There are more than 400 data points. Preview not available. 2344 Spelling Complete 2345 Width and Height have to be at least 1 inch 2346 Current 2347 Width and Height cannot be more than 11 inches 2348 Scales set to manual 2349 True 3D Line 2350 True 3D Area 2351 Legend 2352 Models 2353 The rendering Software/Hardware openGL has changed. In order for the change to take effect, restart the application. 2354 Update Data Range 2355 Clear Highlighting 2356 Insert 2357 Delete 2358 Bubble with Labels 2359 Scatter with Labels 2360 Labels 2361 Labels 2362 Areas 2363 Bars 2364 Bubbles 2365 Columns 2366 Histogram 2367 Lines 2368 Pies 2369 Scatters 2370 Surface 2371 Waterfall 2372 Normal 2373 Hotel 2374 45 2375 90 2376 180 2377 270 2378 315 2379 Chart dimensions greater than paper size.\nSome clipping will occur.\nDo you want to continue? 2380 Drag Data Range 2381 GRAPH NOT VALID FOR DATA GIVEN 2382 Choose a template to apply... 2383 Chart Template (*.3tf) 2384 Linear 2385 Logarithmic 2386 Polynomial 2387 Exponential 2388 Moving Average 2389 General 2390 Number 2391 Currency 2392 Date 2393 Time 2394 Percent 2395 Fraction 2396 Scientific 2397 Special 2398 Custom 2399 Up to one digit (1/4) 2400 Up to two digits (21/25) 2401 Up to three digits (321/943) 2402 As halves (1/2) 2403 As quarters (1/4) 2404 As eights (4/8) 2405 As tenths (3/10) 2406 As hundreths (30/100) 2407 End cell row and column need to be equal or greater than Start cell row and column. 2408 Save Chart Image as... 2409 Invalid sizes for the file type. 2410 Fail to initialize the Quattro Pro interface. Unable to work with Quattro Pro. 2411 Numeric value needs to be greater than 0 2413 OnClear 2414 Formatting 2415 Amigo 2416 Standard 2417 File 2418 Transparent Color 2419 Special Effect 2420 R = %d, G = %d, B = %d 2421 Pattern: Foreground R = %d, G = %d, B = %d Background R = %d, G = %d, B = %d 2422 Gradient: Start R = %d, G = %d, B = %d End R = %d, G = %d, B = %d 2432 OnUndeleteRangeCells 2433 OnUndeleteRangeTable 2435 OpenGL does not handle properly a change of screen resolution. Therefore, the charts have been switch to none rendered charts. 2436 Visualize Dialog 2437 Transparency 2438 Glow 2439 Suppress 2441 K 2442 M 2443 B 2444 Transparent 2445 Glow 2446 Supressed 2447 Default 2448 Move Series 2449 Series %d 2451 Upper 2452 Middle 2453 Lower 2454 Use Arrow for Left of Axis 2455 Use Arrow for Right of Axis 2456 Quality Axes on the Left Side 2457 Quality Axes on the Right Side 2458 Quality Axes on the Bottom Side 2459 Quality Axes on the Top Side 2460 3DScatter 2461 X-AxisTitle 2462 Y-Axis Title 2463 Z-Axis Title 2464 Y Axis 2466 Series Title: 2467 Error 2468 Overwrite ? 2469 Zip code 2470 Zip code + 4 2471 Phone Number 2472 Social Security Number 3000 Stock 3001 Open 3002 Close 3003 High 3004 Low 5007 Select font to be used with selected text\nFont Name 5008 Select font size to be used with selected text\nFont Size 6112 Could not create Winword instance for Automation 6113 Could not create Spelling and Grammar Dialog 6114 Shows Analyze Data dialog\nAnalize Data 6115 Shows Source Data dialog\nSource Data 10295 OLE initialization failed. Make sure that the OLE libraries are the correct version. 10410 Area chart where the data values draw on top of one another. 10411 Area chart where values draw in a cumulative fashion. 10412 Absolute Area chart with two split axes using different scales. 10413 Stacked Area chart with two split axes using different scales. 10414 Dual Axes area chart. Data is drawn against two different Y axes. 10803 Remove all the Series Names 10807 Range Objects 10808 Split Values 16000 Accept changes and closes dialog 16001 Discard changes and closes dialog 16002 Apply changes without closing the dialog 16003 Bring-up help 16004 Change the start color of the gradient. 16005 Add a new gradient to the preset list. This will also prompt for a name for the new gradient. 16006 Rename the currently selected preset gradient. 16007 Delete the currently selected preset gradient. 16008 Duplicate the currently selected preset gradient. The duplicate will be named "Copy of <name>". 16009 Scan through all of the preset gradients in reverse order, bottom to top. 16010 Scan through all of the preset gradients in forward order, top to bottom. 16011 Change the type of gradient. 16012 Change the X position for this gradient. You can also just drag in the preview 16013 Change the end color of the gradient. 16014 X position of this gradient. You can also just drag in the preview. 16015 Y position of this gradient. You can also just drag in the preview. 16016 Change the angle for this gradient. You can also right-click and drag in the preview area to change this value. 16017 Click and drag here to change the X and Y position of this gradient. Right-click here to change the angle of this gradient. 16018 Select a preset gradient from this list. 16019 This is a preview of the band of colors that are used for this gradient. 16020 Load a new preset gradient from disk. Use this when you want to import Amigo gradients created by other users. 16021 Save a new gradient to disk. Use this to export Amigo gradients for use by other users. 16022 Go back to the previous gradient in the preset list. 16023 Advance to the next gradient in the preset list. 16024 Change the Y position for this gradient. You can also just drag in the preview 16025 Set the selected color area to transparent. 16026 Apply a gradient (smooth color blend) to the selected area. 16027 Apply a texture effect to the selected area. 16028 Apply a clipart picture to the selected area. 16029 Apply a pattern to the selected area. 16030 R1C1 16031 R1C2 16032 R1C3 16033 R1C4 16034 R1C5 16035 R1C6 16036 R1C7 16037 R1C8 16038 R1C9 16039 R1C10 16040 R1C11 16041 R1C12 16042 R1C13 16043 R1C14 16044 R1C15 16045 R1C16 16046 R2C1 16047 R2C2 16048 R2C3 16049 R2C4 16050 R2C5 16051 R2C6 16052 R2C7 16053 R2C8 16054 R2C9 16055 R2C10 16056 R2C11 16057 R2C12 16058 R2C13 16059 R2C14 16060 R2C15 16061 R2C16 16062 R3C1 16063 R3C2 16064 R3C3 16065 R3C4 16066 R3C5 16067 R3C6 16068 R3C7 16069 R3C8 16070 R3C9 16071 R3C10 16072 R3C11 16073 R3C12 16074 R3C13 16075 R3C14 16076 R3C15 16077 R3C16 16078 R4C1 16079 R4C2 16080 R4C3 16081 R4C4 16082 R4C5 16083 R4C6 16084 R4C7 16085 R4C8 16086 R4C9 16087 R4C10 16088 R4C11 16089 R4C12 16090 R4C13 16091 R4C14 16092 R4C15 16093 R4C16 16094 R5C1 16095 R5C2 16096 R5C3 16097 R5C4 16098 R5C5 16099 R5C6 16100 R5C7 16101 R5C8 16102 R5C9 16103 R5C10 16104 R5C11 16105 R5C12 16106 R5C13 16107 R5C14 16108 R5C15 16109 R5C16 16110 R6C1 16111 R6C2 16112 R6C3 16113 R6C4 16114 R6C5 16115 R6C6 16116 R6C7 16117 R6C8 16118 R6C9 16119 R6C10 16120 R6C11 16121 R6C12 16122 R6C13 16123 R6C14 16124 R6C15 16125 R6C16 16126 R7C1 16127 R7C2 16128 R7C3 16129 R7C4 16130 R7C5 16131 R7C6 16132 R7C7 16133 R7C8 16134 R7C9 16135 R7C10 16136 R7C11 16137 R7C12 16138 R7C13 16139 R7C14 16140 R7C15 16141 R7C16 16142 R8C1 16143 R8C2 16144 R8C3 16145 R8C4 16146 R8C5 16147 R8C6 16148 R8C7 16149 R8C8 16150 R8C9 16151 R8C10 16152 R8C11 16153 R8C12 16154 R8C13 16155 R8C14 16156 R8C15 16157 R8C16 16158 R9C1 16159 R9C2 16160 R9C3 16161 R9C4 16162 R9C5 16163 R9C6 16164 R9C7 16165 R9C8 16166 R9C9 16167 R9C10 16168 R9C11 16169 R9C12 16170 R9C13 16171 R9C14 16172 R9C15 16173 R9C16 16182 Unused Color Scheme 16183 Unused Color Scheme 16184 Unused Color Scheme 16185 Unused Color Scheme 16186 Unused Color Scheme 16187 Unused Color Scheme 16188 Unused Color Scheme 16189 Unused Color Scheme 16190 Unused Color Scheme 16191 Unused Color Scheme 16192 Unused Color Scheme 16193 Unused Color Scheme 16194 Unused Color Scheme 16195 Unused Color Scheme 16196 Unused Color Scheme 16197 Unused Color Scheme 16198 Unused Color Scheme 16199 Unused Color Scheme 16200 Unused Color Scheme 16201 Unused Color Scheme 16202 Unused Color Scheme 16203 Unused Color Scheme 16204 Unused Color Scheme 16205 Unused Color Scheme 16206 Right-click this rectangle to edit a custom color. 16207 Right-click this rectangle to edit a custom color. 16208 Right-click this rectangle to edit a custom color. 16209 Right-click this rectangle to edit a custom color. 16210 Right-click this rectangle to edit a custom color. 16211 Right-click this rectangle to edit a custom color. 16212 Right-click this rectangle to edit a custom color. 16213 Right-click this rectangle to edit a custom color. 16214 Right-click this rectangle to edit a custom color. 16215 Right-click this rectangle to edit a custom color. 16216 Right-click this rectangle to edit a custom color. 16217 Right-click this rectangle to edit a custom color. 16218 Right-click this rectangle to edit a custom color. 16219 Right-click this rectangle to edit a custom color. 16220 Right-click this rectangle to edit a custom color. 16221 Right-click this rectangle to edit a custom color. 16222 Right-click this rectangle to edit a custom color. 16223 Right-click this rectangle to edit a custom color. 16224 Right-click this rectangle to edit a custom color. 16225 Right-click this rectangle to edit a custom color. 16226 Right-click this rectangle to edit a custom color. 16227 Right-click this rectangle to edit a custom color. 16228 Right-click this rectangle to edit a custom color. 16229 Right-click this rectangle to edit a custom color. 16230 Right-click this rectangle to edit a custom color. 16231 Right-click this rectangle to edit a custom color. 16232 Right-click this rectangle to edit a custom color. 16233 Right-click this rectangle to edit a custom color. 16234 Right-click this rectangle to edit a custom color. 16235 Right-click this rectangle to edit a custom color. 16236 Right-click this rectangle to edit a custom color. 16237 Right-click this rectangle to edit a custom color. 16238 Select a texture preset from the list. 16239 This area displays a preview of texture as it will tile in the selected area. 16240 Scan through all of the preset gradients in reverse order, bottom to top. 16241 Go back to the previous preset in the list. 16242 Advance to the next texture in the preset list. 16243 Scan through all of the preset gradients in forward order, top to bottom. 16244 Leave this texture as is; do not perform any flipping. 16245 Flip the texture so that each tile is vertically reversed from the previous. 16246 Flip the texture so that each tile is horizontally reversed from the previous. 16247 Flip the texture so that each tile is both vertically and horizontally reversed from the previous. 16248 Arrange the texture so that it tiles in a horizontal bricklayer effect. 16249 Arrange the texture so that it tiles in a vertical bricklayer effect. 16250 Choose from the list of preset textures. 16251 Apply a texture fill to this area. 16275 Turn on rendering for this chart type. 16276 Choose from a list of graph types. 16277 IDS_TT_GALLERY_ADVANCED_PREVIEW 16278 Create an absolute area chart. 16279 Create a stacked area chart. 16280 Create a percent area chart. 16281 Horizontal Area 16282 Vertical Area 16283 Make this chart have two unique axes. You will need to assign data to each axis separately. 16284 Split the dual axes on this chart so that Y1 is on the top, and Y2 is on the bottom. 16285 Press this button to create the new chart. 16286 Smooth area chart 16287 Create a clustered bar chart. 16288 Create a stacked bar chart. 16289 Create a percent bar chart. 16290 Horizontal bar 16291 Column chart 16293 Make this chart have two unique axes. You will need to assign data to each axis separately. 16294 Change the riser shape that this chart will use. 16295 IDS_TT_GALLERY_HILO_HILO 16296 IDS_TT_GALLERY_HILO_OPEN_HILO_CLOSE 16297 IDS_TT_GALLERY_HILO_HILO_VOLUME 16298 IDS_TT_GALLERY_HILO_OPEN_HILO_CLOSE_VOLUME 16299 Create an X-Y pair scatter chart. Each marker must have two unique values to create this chart! 16300 Create an X-Y-Label scatter chart. Each marrker must have 3 unique values - X, Y, and text Label - to create this chart. 16301 Make this chart have two unique axes. You will need to assign data to each axis separately. 16302 Change the riser shapes that this chart will use. 16303 Change the riser shapes that this chart will use. 16304 IDS_TT_GALLERY_3D_XYZ_SCATTER_MARKER_SHAPE 16305 Create a 3D surface chart. 16306 Create a 3D honeycombed surface chart. 16307 Create a 3D surface chart with distinct surface sides. 16308 IDS_TT_GALLERY_LINE_ABSOLUTE 16309 IDS_TT_GALLERY_LINE_STACKED 16310 IDS_TT_GALLERY_LINE_PERCENT 16311 IDS_TT_GALLERY_LINE_HORIZONTAL 16312 IDS_TT_GALLERY_LINE_VERTICAL 16313 IDS_TT_GALLERY_LINE_DUAL_AXES 16314 IDS_TT_GALLERY_LINE_SPLIT_DUAL_AXES 16315 IDS_TT_GALLERY_LINE_MARKERS_ON_LINE 16316 IDS_TT_GALLERY_LINE_SMOOTH_LINES 16317 IDS_TT_GALLERY_LINE_MARKER_SHAPE 16318 Make this a normal pie chart. 16319 Make this a Ring Pie chart. 16320 IDS_TT_GALLERY_PIE_PROPORTIONAL 16321 IDS_TT_GALLERY_RADAR_LINE 16322 IDS_TT_GALLERY_RADAR_AREA 16323 IDS_TT_GALLERY_RADAR_STACKED_AREA 16324 IDS_TT_GALLERY_RADAR_DUAL_AXES 16325 Click this tab to select a custom chart template. 16326 Go back to the previous step in the wizard. 16327 Exit the wizard and create the new chart. 16328 Go forward to the next step in the wizard. 16329 IDS_TT_WIZARD_DA_TITLE_1 16330 IDS_TT_WIZARD_DA_TITLE_2 16331 IDS_TT_WIZARD_DA_TITLE_3 16332 IDS_TT_WIZARD_DA_TITLE_4 16333 IDS_TT_WIZARD_DA_TITLE_5 16334 IDS_TT_WIZARD_DA_TITLE_1 16335 IDS_TT_WIZARD_DA_NAME_1 16336 IDS_TT_WIZARD_DA_NAME_2 16337 IDS_TT_WIZARD_DA_NAME_3 16338 IDS_TT_WIZARD_DA_NAME_4 16339 IDS_TT_WIZARD_DA_NAME_5 16340 IDS_TT_WIZARD_DA_NAME_6 16341 IDS_TT_WIZARD_DA_NUMBER_1 16342 IDS_TT_WIZARD_DA_NUMBER_2 16343 IDS_TT_WIZARD_DA_NUMBER_3 16344 IDS_TT_WIZARD_DA_NUMBER_4 16345 IDS_TT_WIZARD_DA_NUMBER_5 16346 IDS_TT_WIZARD_DA_NUMBER_6 16347 Click on the preview to select this graph type. 16348 Click on the preview to select this graph type. 16349 Click on the preview to select this graph type. 16350 Click on the preview to select this graph type. 16351 Click on the preview to select this graph type. 16352 Click on the preview to select this graph type. 16353 Stop scanning through the list of gradient presets. 16354 Stop scanning through the list of texture presets. 16355 Change the settings for the Y numeric axis of this chart. 16356 Change the settings for the Y2 numeric axis of this chart. 16357 Change the settings for the X numeric axis of this chart. 16358 This area displays an interactive preview of the grid and scale changes you have made. 16359 Change the scale and grids for this axis. 16360 Show the axis and labels on the left side of the chart. 16361 Show the axis and labels on the right side of the chart. 16362 Show the axis and labels on both sides of the chart. 16363 Reverse this axis. The risers will reverse their direction as well. 16364 Display the axis line. This may not be visible if the line is colored to be the same as the underlying chart frame. 16365 Display the zero line. This may not be visible if the line is colored to be the same as the underlying chart frame. 16366 Always include zero in the calculation of this scale. Uncheck this item to use the exact data values. 16367 Draw this scale as logarithmic. In this mode, the scale is always automatic, and the data cannot include zero or negative values. 16368 Use a manual maximum value for this scale. 16369 Enter the maximum value for this scale. 16370 Use a manual minimum value for this scale. 16371 Enter the minimum value for this scale. 16372 Display the labels for this axis. 16373 Select a number format for this axis. 16374 Do not draw the maximum value label for this scale. 16375 Do not draw the minimum value label for this scale. 16376 Draw grid lines for this axis. 16377 Select the type of grids or ticks for this axis. This is greyed out if grid lines are turned off. 16378 Use a manually set interval for grid lines. 16379 Use a manually set interval for grid lines. 16380 Enter the interval value for grid lines on this axis. 16382 Determines whether lines and areas extend all the way to the edge of the frame, or stop in the center of a group. 16383 Negative numbers in the data draw up from the base of the chart. 16384 Negative numbers draw down from a zero line on the chart while positive values draw up from the zero line. 16385 IDS_TT_SCALEGRID_CUSTOM_BASE_EDIT 16386 Select the type of grids or ticks for this axis. This is greyed out if grid lines are turned off. 16387 Enter a custom number format for this axis. 16388 Select a custom number format from a list of predefined formats. 16389 Enter or Select the number of decimal places. 16390 Select a currency symbol. 16391 Select a number from the list. 16392 Choose a type of number format from the list. 16393 An example of how the formatted number will look. 16394 Choose a type of number format. 16395 Display quadrant lines on this chart. 16396 Enter the value for the origin point of the quadrant lines. 16397 Values outside of the scale range will not be drawn. 16398 Values outside the scale range will be drawn, but clipped at the frame's edge. 16399 Values outside the scale range will be drawn, but clipped at the frame's edge. 16400 IDS_TT_SCALEGRID_OUT_OF_RANGE_LABEL 16401 IDS_TT_SCALEGRID_ORD_GENERAL_AUTOMATIC 16402 IDS_TT_SCALEGRID_ORD_GENERAL_CATEGORY 16403 IDS_TT_SCALEGRID_ORD_GENERAL_TIME_SCALE 16404 Show the axis and labels on the bottom of the chart. 16405 Show the axis and labels on both top and bottom of the chart. 16406 Show the axis and lables on the top of this chart. 16407 IDS_TT_SCALEGRID_ORD_GENERAL_AXIS_CROSS_CATEGORY 16408 Display the group axis line. This may not be visible if the line is set to the same color as the underlying frame. 16409 Reverse the order of the groups. This does not change the underlying data. 16410 Use a specified number of group breaks, rather than the full number specified in the data. 16411 Use a manual number of group grid lines. 16412 Enter a specific number of group gridlines. 16413 Check this box if you want to eliminate the display of some of the group labels. 16414 Enter the number of groups to skip. 16415 Stagger the labels for this axis. 16416 Do not show the first label for this axis. 16417 Do not draw the last label for this axis. 16418 Stagger the labels for this axis. 16419 IDS_TT_SCALEGRID_GRID_ON_SURFACES 16420 This area displays an interactive preview of your changes. This preview always shows a un-rendered version of the chart. 16421 Change the options for this part of the chart. 16422 Changes the three-dimensional tilt of the pie. 16423 Changes the three-dimensional depth of the pie. 16424 Rotates the entire pie. 16425 Explodes all slices or a single slice (if selected). 16426 For multiple pies, how many pies to draw per row? 16427 Change the size of the hole for ring pies. This is greyed out unless the pie sub-type is "Ring Pie". 16428 Change the edge style of a rendered pie chart. This is greyed out unless this chart is in Rendered mode. 16429 Show a rendered drop shadow for the pie. This is greyed out unless this chart is in Rendered mode. 16430 Restore all deleted or detached slices to their original location. 16431 Select the type of pie chart. 16432 For multiple pies only: Make each pie proportionally larger or smaller. 16433 Force pies to be perfectly circular. 16434 Label each pie with the group label from the data sheet. 16435 For ring pies, show the total value in the hole in the center. This is greyed out unless the pie sub-type is "Ring Pie". 16436 Display the legend box for this chart. 16437 Display the numeric data values for this chart. 16438 IDS_TT_SHOW_DATA_TABLE 16439 Display the labels for each slice in the pie chart. 16440 Draw lines connected the slice labels to the actual slices. 16441 IDS_TT_SIZE_2NDPLOT_EDIT 16442 Change the gap between sets of bar risers. 16443 Connect the stack elements with lines. 16444 IDS_TT_SPLIT_BASED_ON_COMBO 16445 IDS_TT_2ND_PLOT_STARTAT_COMBO 16446 IDS_TT_2ND_PLOT_HAS_EDIT 16447 IDS_TT_2ND_PLOT_LESS_THAN_LABEL 16448 IDS_TT_2ND_PLOT_LESS_THAN_EDIT 16449 IDS_TT_2ND_PLOT_LESS_THAN_PERCENT 16450 IDS_TT_DRAGDROP_MESSAGE 16451 IDS_TT_3D_SHADING_SURFACE 16452 IDS_TT_WIREFRAME_SURFACE 16453 IDS_TT_CONTOUR 16454 Create a 3D honeycombed surface chart. 16455 Create a true 3D surface chart. 16456 Create a true 3D surface with sides. 16457 Choose a coloring mode for this chart. 16458 IDS_TT_OUT_OF_RANGE_DATA 16459 Display the group axis for this chart. 16460 Display the major group axis gridlines for this chart. 16461 Display the minor group axis gridlines for this chart. 16462 Display the Y numeric axis for this chart. 16463 Display the major grid lines for the Y numeric axis. 16464 Display the minor gridlines for the Y numeric axis. 16465 Display the series axis for this chart. 16466 Display the major series gridlines for this chart. 16467 Display the minor series gridlines for this chart. 16468 IDS_TT_DATA_TABLE 16469 Display error bars on this chart. 16470 Display a legend box for this chart. 16471 IDS_TT_SPECTRUM 16472 IDS_TT_SHOW_DROP_LINES 16473 IDS_TT_SMOOTH_AREAS 16474 Chart will be drawn with a 3D depth effect, although not true 3D. 16475 Make this chart a clustered bar chart. The bars will be arranged into groups. 16476 Make this chart a dual Y chart. You will need to assign series to the Y2 axis. 16477 Make this chart a percent chart. 16478 Split the dual axes of this chart so that Y1 is on the top and Y2 is on the bottom. 16479 Make this chart a stacked chart. 16480 Make this chart a true 3D Line chart. 16481 Choose a format for the data labels on this chart. 16482 Choose a default location for the data labels on this chart. 16483 Display the total for a stack bar at the top of the bar. 16484 IDS_TT_SHOW_LEGEND_KEY_NEXT_LABEL 16485 Swap these series from one axis to the other. 16486 Change the position of the vertical split between the Y1 and Y2 axes. 16487 Edit the position of the vertical split between the Y1 and Y2 axes. 16488 These series are currently on the Y2 axis. 16489 These series are currently on the Y1 axis. 16490 Change the gap width between groups of bars. 16491 Change the gap width between groups of bars. 16492 Change the overlap factor for bars. A negative value will create an overlap; positve values will narrow the actual bars. 16493 Change the overlap factor for bars. A negative value will create an overlap; positve values will narrow the actual bars. 16494 Choose a default riser shape for the bars in this chart. 16495 Enter a value for the overlap factor for bars. A negative value will create an overlap; positve values will narrow the actual bars. 16496 Enter a value for the gap between groups of bars. 16497 Display connecting lines between the stack elements in this chart. 16498 Force all risers in this chart to have a perfectly square aspect ratio. 16499 IDS_TT_RADAR_SMOOTH_LINE_AREA 16500 IDS_TT_RADAR_SHOW_MARKERS 16501 IDS_TT_RADAR_SIZE_SLIDER 16502 IDS_TT_RADAR_SIZE_EDIT 16503 IDS_TT_RADAR_SIZE_SPIN 16504 Choose a default marker shape for the risers in this chart. 16505 This chart should use dual Y axes. You will need to assign some series to the Y2 axes for this chart type. 16506 IDS_TT_RADAR_LINE 16507 IDS_TT_RADAR_AREA 16508 IDS_TT_2D_LINE_CHART_FRAME 16509 Select to change the chart to a dual Y axis chart 16510 IDS_TT_BUBBLE_XYSIZE 16511 IDS_TT_BUBBLE_XYSIZE_LABELS 16512 Connect the markers in each series with a line. 16513 Choose a default marker shape for the points in this chart. 16514 IDS_TT_SCATTER_SHOW_DROP_LINES 16515 Display the markers for each scatter point. 16516 IDS_TT_SCATTER_SIZE_EDIT 16517 IDS_TT_SCATTER_SMOOTH_LINES 16518 IDS_TT_SCATTER_SIZE_SLIDER 16519 Change the relative value of the bubble sizes. 16520 Change the relative value of the bubble sizes. 16521 Change the shape of the bubbles in this series. 16522 Change the relative value of the bubble sizes. 16523 IDS_TT_BUBBLE_AREA_BUBBLES 16524 Connect all of the bubble points in this series with a line. 16525 IDS_TT_BUBBLE_SHOW_DROP_LINES 16526 IDS_TT_BUBBLE_SMOOTH_LINES 16527 IDS_TT_BUBBLE_WIDTH_BUBBLES 16528 IDS_TT_SCATTER_2D_LINE_CHART_FRAME 16529 Create a dual-axes X-Y pair scatter chart. 16530 Create an X-Y pair Scatter chart. Requires two unique values per marker. 16531 Create an X-Y-Label Scatter chart. Requires three values per marker, with the last being a text label. 16532 Change the size of the line markers 16533 Change the size of the line markers 16534 Change the size of the line markers 16535 Change the combo chart type for this series. 16536 IDS_TT_LINE_SHOW_DROP_LINE 16537 IDS_TT_LINE_SHOW_HIGHLOW_LINE 16538 Draw markers on the lines for this chart. 16539 IDS_TT_LINE_SHOW_UPDOWN_BAR 16540 IDS_TT_LINE_SMOOTH_LINE 16541 Make this chart a horizontal histogram, similar to a Bar chart. 16542 Make this chart a vertical histogram, similar to a Column chart. 16543 Change the split position for the dual axes break on this chart. 16544 Select a combo chart type for this series. 16545 IDS_TT_SMOOTH_LINE 16546 Show markers on this charts. 16547 Change the relative size for the markers in this chart. 16548 Change the relative size for the markers in this chart. 16549 Change the relative size for the markers in this chart. 16550 Choose a new marker shape for the selected series. 16551 IDS_TT_WIREFRAME 16552 Change the detach distance for the selected slice(s). 16553 Change the detach distance for the selected slice(s). 16554 Change the detach distance for the selected slice(s). 16555 Delete the selected slice(s) from the pie. 16556 Restore all detached and deleted slices to the pie. 16557 Draw a line connecting the points in the order in which they were entered. 16558 Show error bars on this series. 16559 Choose which type of error bar to draw. 16560 An error bar with a single value for all series and both top and bottom. 16561 An error with a percentage factor of error for this series. 16562 An error bar with a standard deviation value for this series. 16563 An error bar with a standard error value for this series. 16564 IDS_TT_ERRORBAR_CUSTOM 16565 Enter a new value for this part of the error bar. 16566 Enter a value for the upper part of the error bar. 16567 Enter a value for the lower part of the error bar. 16568 Choose which type of trendline to draw on this series. 16569 Enter the value for polynomial order for this trendline. 16570 Enter the number of periods for this trendline. 16571 IDS_TT_TRENDLINE_MANUAL_INTERCEPT 16572 IDS_TT_TRENDLINE_MANUAL_INTERCEPT_EDIT 16573 Display the equation for this trendline on the chart. 16574 Display the RSquare value for this trendline on the chart. 16575 IDS_TT_TRENDLINE_SERIES_NAME 16576 IDS_TT_TRENDLINE_CUSTOM 16577 IDS_TT_TRENDLINE_CUSTOM_EDIT 16578 Create a true 3D Area chart. 16579 This chart will draw using advanced Rendering. This will look better, but may take longer to draw. 16580 Create a true 3D Column chart. 16581 Create a Pie chart. 16582 Create a ring pie chart. 16583 Show each value in the stack as a cumulative value. 16584 Show this label as a percentage value. 16585 Choose a lighting preset. 16586 Expand this dialog to show the advanced options for editing presets. 16587 Click and drag here to move the X and Y positions of the light. Right-click and drag to move the light in the Z direction. 16588 Select the preset from the list. 16589 Scan in reverse through the list of presets, bottom to top. 16590 Advance to the next preset in the list. 16591 Scan forward through all the presets in the list, top to bottom. 16592 Stop scanning through the list of presets. 16593 Create a new preset. This will prompt for a name. 16594 Rename the current preset. 16595 Delete the current preset. 16596 Duplicate the current preset. 16597 Save the preset. 16598 Hide the advanced options and show only the presets. 16599 Make this gradient a straight left-right or up-down blend. 16600 Make this gradient a circular blend. 16601 Make this gradient a rectangular blend. 16602 Enter a new value for the horizontal offset for this gradient. 16603 Enter a new value for the vertical offset for this gradient. 16604 Change the value of the X offset for this gradient. 16605 Change the value of the Y offset for this gradient. 16606 Enter a new value for the X angle for this gradient. 16607 Enter a new value for the Y angle for this gradient. 16608 Change the settings for this light. 16609 Rotate the 3D cube in the X direction. 16610 Rotate the 3D cube in the Y direction. 16611 Rotate the 3D cube in the Z direction. 16612 Move the 3D cube along its X axis. 16613 Move the 3D cube along its Y axis. 16614 Move the 3D cube along its Z axis. 16615 Distort the perspective (camera view) of the 3D cube. 16616 Move the 3D cube left or right. 16617 Move the 3D cube up or down. 16618 Zoom the 3D cube closer or further away. 16619 Change the length of the 3D cube in the X direction. 16620 Change the length of the 3D cube in the Y direction. 16621 Change the length of the 3D cube in the Z direction. 16622 Link all three 3D cube length settings together. 16623 Change the thickness of the wall in the X direction. 16624 Change the thickness of the wall in the Y direction. 16625 Change the thickness of the wall in the Z direction. 16626 Link all three wall thickness settings together. 16627 Click and drag to change the X and Y view parameters. Right-click and drag to change the Z parameters. 16628 Choose a preset from the list. 16629 Change the amount of ambient light cast on this chart. 16630 Change the reflective radiosity for this chart. 16631 Change the shininess factor for this chart. 16632 Change the background glow for the chart. 16633 Change the X position of this light. 16634 Change the Y position of this light. 16635 Change the Z position of this light. 16636 Turn this light on. 16637 Change the color of this light. 16638 Select the clip art vendor to use. 16639 Choose which category of pictures to use. 16640 Scale the pictures to match the scale and grid units for a "Pictograph". 16641 Click this button to select a picture from another location. 16642 Flip the picture from top to bottom. 16643 Leave this picture as is; do not perform any flipping. 16644 Flip the picture from left to right. 16645 Flip this picture both left to right and top to bottom. 16646 Amigo 16647 Microsoft 16648 Choose a pattern to apply to the selected area. 16649 Choose a background color for the pattern. 16650 Choose a foreground color for the pattern. 16651 This area shows a preview of the currently selected pattern. 16652 The name of the currently selected pattern. 16653 IDS_TT_DROP_SHADOW_PREVIEW 16654 IDS_TT_DROP_SHADOW_COLOR 16655 IDS_TT_DROP_SHADOW_OFFSET_X 16656 IDS_TT_DROP_SHADOW_OFFSET_Y 16657 IDS_TT_DROP_SHADOW_ONOFF 16658 IDS_TT_WATERFALL_VERTICAL 16659 IDS_TT_WATERFALL_HORIZONTAL 16660 Change the formatting for the selected area of the chart. 16661 All font sizes are absolute, regardless of chart scaling. Exact font sizes will be used. 16662 All font sizes will be relative to the scaled size of the chart. Exact point sizes will not be matched. 16663 Open the data sheet automatically whenever editing an Amigo chart inside of PowerPoint. 16664 Use the Data Analyzer when creating a new chart. 16665 Use anti-aliasing for Rendered charts. This can slow down drawing a great deal, but results in smoother charts. 16666 Use software emulation for OpenGL rendering. Can be slower, but is guaranteed to work on all video cards. 16667 Use the video card's hardware for OpenGL rendering. Can be fast, but depending on video drivers, it may be unpredictable. 16668 By default, create all new charts in Rendered mode. 16669 Draw a 3D footer for this chart. This is greyed out unless the chart is in Rendered mode. 16670 Draw a 3D margin for this chart. This is greyed out unless the chart is in Rendered mode. 16671 IDS_TT_SCALEGRID_QUADRANT_CROSS_AT_EDIT 16672 Display a total value for each stack in the chart. 16673 Select a box style for this legend. 16674 Where the legend should appear on the chart. 16675 Place the legend markers above the legend text. 16676 Place the legend markers below the legend text. 16677 Center the legend text directly over the legend markers. 16678 Place the legend markers to the left of the legend text. 16679 Place the legend markers to the right of the legend text. 16680 Use the absolute data values for the stacked data labels. 16681 Display a shadow underneath the pie. 16682 Draw the numerical values for each pie slice. 16683 Values will be drawn on top of each pie slice. 16684 Values will be drawn just outside of each pie slice. 16685 Draw the text (group) labels for each pie slice. 16686 Text labels will be drawn on top of each pie slice. 16687 Text labels will be drawn just outside of each pie slice. 16688 Adjust the rounding factor for rendered charts. 16689 Change the orientation of the legend text and markers. 16690 Instead of a legend, show series labels next to the actual series. 16691 Choose how you want the markers and text to appear within the legend box. 16692 Instead of series labels, show an actual legend box. 16693 Select a starting color from the color palette. 16694 Select a ending color from the color palette. 16695 Justify labels 16696 Could not change chart type: no enough data\nor inapropiate for new chart type. 16697 Data Manager - 16698 Select the Excel sheet which contains the chart data. 16699 Enter the start cell for your chart data range. 16700 Enter the end cell for your chart data range. 16701 The chart will create series based on the rows in the data range. 16702 The chart will create series based on the columns in the data range. 16703 First character in range needs to be a letter. 16704 Maximum range allowed by EXCEL is IV\nwhich is equal to 256 colums. 16705 Numeric value needs to be greater than 0\nand less than 65536 for rows or 256 for columns 16706 Please, use R1C1 format for the cell range. 16710 Change the oversampling factor (Speed vs. Quality) for OLE embedded charts. 16711 Change the oversampling factor (Speed vs. Quality) for OLE embedded charts. 16712 Enter a value for the oversampling factor (Speed vs. Quality) for OLE embedded charts. 16713 Remove the selected custom number format 16714 Select an abbreviation for large numbers 16715 When checked, wall colors are linked to color of floor 16716 Move the selected Series to the Top 16717 Move the selected Series to the Bottom 16718 Move the selected Series to its Initial Position 16719 Query for a preset name and save the preset. 16720 IDS_TT_QUALITYAXES_Y1 16721 IDS_TT_QUALITYAXES_Y2 16722 IDS_TT_QUALITYAXES_X 16723 IDS_TT_QUALITYAXES_PREVIEW 16724 IDS_TT_QUALITYAXES_TAB 16725 IDS_TT_QUALITYAXES_LEFTSIDE 16726 IDS_TT_QUALITYAXES_RIGHTSIDE 16727 IDS_TT_QUALITYAXES_BOTHSIDE 16728 IDS_TT_QUALITYAXES_DESCENDING 16729 IDS_TT_QUALITYAXES_SHOW_AXISLINE 16730 IDS_TT_QUALITYAXES_DYNAMIC_RESIZE 16731 IDS_TT_QUALITYAXES_SHOWAXIS 16732 IDS_TT_QUALITYAXES_AUTOBLEND 16733 IDS_TT_QUALITYAXES_ARROW_TOP 16734 IDS_TT_QUALITYAXES_ARROW_BOTTOM 16735 IDS_TT_QUALITYAXES_GRIDLINES 16736 IDS_TT_QUALITYAXES_POSITION_SLIDER 16737 IDS_TT_QUALITYAXES_POSITION_EDIT 16738 IDS_TT_QUALITYAXES_POSITION_SPIN 16739 IDS_TT_QUALITYAXES_MAXSCALE_CHECK 16740 IDS_TT_QUALITYAXES_MAXSCALE_EDIT 16741 IDS_TT_QUALITYAXES_MANUAL_HIGHBREAK_CHECK 16742 IDS_TT_QUALITYAXES_MANUAL_HIGHBREAK_SLIDER 16743 IDS_TT_QUALITYAXES_MANUAL_HIGHBREAK_EDIT 16744 IDS_TT_QUALITYAXES_MANUAL_LOWBREAK_CHECK 16746 IDS_TT_QUALITYAXES_MANUAL_LOWBREAK_EDIT 16747 IDS_TT_QUALITYAXES_MINSCALE_CHECK 16748 IDS_TT_QUALITYAXES_MINSCALE_EDIT 16749 IDS_TT_QUALITYAXES_SHOW_SEGMENT_ON_CHART 16750 IDS_TT_QUALITYAXES_LABEL_SEGMENT_EDIT 16751 IDS_TT_QUALITYAXES_LABEL_SEGMENT_CHECK 16752 IDS_TT_QUALITYAXES_LABEL_SEGMENT_COLOR 16753 IDS_TT_QUALITYAXES_LABEL_ALIGN_CENTER 16754 IDS_TT_QUALITYAXES_LABEL_ALIGN_INSIDE 16755 IDS_TT_QUALITYAXES_LABEL_ALIGN_OUTSIDE 16757 IDS_TT_QUALITYAXES_LABEL_POS_CENTER 16758 IDS_TT_QUALITYAXES_LABEL_POS_RIGHT 16759 IDS_TT_QUALITYAXES_LABEL_POS_LEFT 16760 IDS_TT_GALLERY_STOCK_WALL_STREET 16761 IDS_TT_GALLERY_STOCK_CANDLE 16762 IDS_TT_GALLERY_STOCK_HILO 16763 IDS_TT_GALLERY_STOCK_HILOOPEN 16764 IDS_TT_GALLERY_STOCK_HILOCLOSE 16765 IDS_TT_GALLERY_STOCK_DUALY 16766 IDC_SHOW_52WEEK_HIGH_LINE 16767 IDC_SHOW_52WEEK_LOW_LINE2 16768 IDC_GAP_CANDLE_STYLE 16769 IDS_TT_GALLERY_STOCK_WALL_STREET 16770 IDS_TT_HILO_STYLE 16771 IDS_TT_HILOOPEN_STYLE 16772 IDS_TT_HILOCLOSE_STYLE 16773 IDS_TT_OPENHILOCLOSE_STYLE 16774 IDC_TT_HEIGHT_OVERLAP_SLIDER 16775 IDC_TT_SHOW_CLOSE_TICK 16776 IDC_TT_LENGTH_OVERLAP_SLIDER 16777 IDC_TT_GAP_WIDTH_LABEL 16779 IDS_TT_TO_FLOOR 16780 IDS_TT_TO_LEFT_WALL 16781 IDS_TT_TO_RIGHT_WALL 16782 IDS_TT_TO_NEIGHBOR 16783 IDS_TT_MARKERSIZE_SLIDER 16784 IDS_TT_MARKERSIZE_EDIT 16785 IDS_TT_3DSCATTER_XYZ_WITH_LABELS 16786 IDS_TT_3DSCATTER_XYZ 16787 Use a separator for thousands 16788 Display the right wall 16789 Display the left wall 16790 Display the floor 16791 Labels will be drawn on the sides. 20054 Normal\nItalic\nBold\nBold Italic\nNot Bold\nNot Italic 20055 8\n9\n10\n11\n12\n14\n16\n18\n20\n22\n24\n28\n36\n48\n56\n72 20056 Attribute 20057 Value 20058 Normal\nRaised\nInset\nnone 20059 No Border. 20060 No Edit\nFixed Year\nFixed Month\nFixed Day\nFixed Hour\nFixed Minute\nFixed Second 20061 No Validation 0\nTime 1\nDate 2\nDate and Time 3\n 20062 Time 0\nShortDate 1\nLongDate 2\nCustom 3 20063 0\n45\n90\n135\n180\n225\n270\n315\n 20064 ($1)\n-$1\n$-1\n$1-\n(1$)\n-1$\n1-$\n1$-\n-1 $\n-$ 1\n$ 1-\n 20065 $1\n1$\n$ 1\n1 $\n(1$)\n 20066 Default\nScientific\nFixed\nGeneral\nDollars\nComma\nHex\nLogic\nDD-MMM-YY\nDD-MMM\nMMM-YY\nMM/DD/YY\nHidden\nHH:MM:SS\nPercent\nText\nDD.MM.YYYY\nYYYY-MM-DD\nMM/DD/YY HH:MM\nUser1\nUser2\nUser3\nUser4\n 20071 Header 20073 Footer 20074 Record 20075 Processing... 20076 Done. 20077 Press ESC to cancel 20078 Left Aligned 20079 Centered 20080 Right Aligned 20081 Do you want to abort the operation? 20082 Operation is too large for the undo buffer. Do you want to continue? 20124 Enter 20125 Error 20126 No ellipse\nDotted....\nPound### 20128 Dao bitmap control 20129 Tab %u 20130 Checkbox with modify state 20131 3D Checkbox with modify state 20132 Dao object preview control 20133 Binary 20134 The binary data is not valid. 20135 OG Error: Returned hr: %x\n 20136 Radio Buttons, 3d-Effect and active state 20137 Radio Buttons, with active state 20138 Insert 20139 Redoing %1 ... 20140 Undoing %1 ... 20141 Generating undo information ... 20142 Storing cells .... 20143 Restoring cells ... 20144 Cells. 20145 Removing rows ... 20146 Removing columns ... 20147 Copying text format ... 20148 Copying internal format ... 20149 Range too big. 20150 Cut Data. 20151 Cutting data ... 20152 Pasting data from clipboard... 20153 Pasting is not possible for multi-area selections. 20154 Paste. 20155 Replacing values ... 20156 Replace All 20157 Searching values ... 20158 Change Row Heights 20159 Change Column Widths 20160 Change Default Row Height 20161 Change Default Column Width 20162 Move Rows 20163 Move Columns 20164 Insert Rows 20165 Insert Columns 20166 Cover Cells 20167 Cells 20168 Freeze Columns 20169 Freeze Rows 20170 Hide Rows 20171 Hide Columns 20172 Resizing Rows 20173 Resizing Columns 20174 Current Cell 20175 Clipboard size is different from selected range 20176 '%1' is not a valid date! 20177 Date '%1' out of range (it is either before 1970 or after 2037)! 20178 Copy 20179 Move 20180 Clear Cells 20181 Sort Rows 20182 Sort Columns 20183 Not enough memory 20184 Canceled 20185 Styles Map Changes 20186 Property Settings 20187 Base Style 20188 Set Range Name 20189 Delete Range Name 20203 The copy operation failed 20204 The cut operation failed 20205 Objective Grid Insert Object 20206 You have already spawned a viewer. Please use this for editing 20207 Failed to invoke insert object dialog. 20526 You must select a shortcut before clicking Remove. 20527 You must select a macro before clicking Create. 20528 Reset All will set all shortcuts back to their defaults. Any shortcuts you have created will be forgotten. Are you sure you want to do this? 20529 (Unassigned) 20530 That key combination is reserved and may not be reassigned. 20531 New (Insert) 20532 Delete (Delete) 20533 Move Up (Alt+Up Arrow) 20534 Move Down (Alt+Down Arrow) 20535 Press the Ctrl key to prevent docking. 20536 &Reset 20537 &Delete 20538 Customize 20617 Enter 20618 Error 20619 Menu bar 20621 [Design] 20622 TabStop 20623 Visible 20624 noclose 20625 Select Directory 20626 Select File 20627 .%if 20635 T 20636 C 20637 CE 20638 <- 20639 % 20640 7 20641 8 20642 9 20643 / 20644 4 20645 5 20646 6 20647 * 20648 1 20649 2 20650 3 20651 - 20652 0 20653 + 20654 0 20655 Hide docked window 20656 ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz 20657 Expand docked window 20658 Contract docked window 20659 About 20660 &Windows... 20661 SECSplashWnd 20662 SECSplashWndParent 20663 Did you know... 20664 &Workspaces... 20665 Workspace Manager 20666 Invalid workspace name. 20667 Workspace '%s' already exists. Please enter a unique workspace name. 20668 Invalid workspace name. 20669 Workspace '%s' already exists. Please enter a unique workspace name. 20670 Save new workspace '%s'?\n 20671 Workspaces 20672 <None> 20673 You must select an item for this operation 20674 ToolBar%d 20675 SECCryptoFile cannot be opened in both Output Feedback (OFB) mode and CFile::modeReadWrite. 20676 Overview Window 20677 Alt + 20678 (No description available) 20679 No Preview... 20680 Select Program 20681 Programs|*.exe;*.pif;*.com;*.bat|All files (*.*)|*.*|| 20682 Select Initial Directory 20683 (new tool) 20684 The menu text cannot be blank 20685 (none) 20686 Open Workspace 20687 Workspaces 20688 All Files 20689 Save Workspace 20690 Invalid workspace. Operation has been cancelled. 23100 &Other... 23101 Rotate90: Error, unsupported format.