3 Are you sure you want to permanently delete the setting "%s"?
4 %s KB
5 Bilinear
6 8-tap anisotropic
7 Please enter a name for this setting.
8 More Direct3D
10 Best image quality
11 High image quality
12 Blend
13 High Performance
14 Best Performance
15 %s MB
16 PCI
17 AGP
18 %u MHz
21 <Unavailable>
40 Not present
41 Unknown
42 NTSC
43 PAL
44 SECAM
45 HDTV
46 %s%%
47 %s%s
65 Off
66 Low
67 Medium
68 High
69 Max
70 Off
71 Low
72 Moderate
73 High
75 Auto-select
76 Always off
77 Always on
78 AGP (PCI mode)
80 Chrontel
81 Chrontel 7000 Family
82 Chrontel 7003
83 Chrontel 7004
84 Chrontel 7005
85 Chrontel 7006
86 Chrontel 7007
87 Chrontel 7008
88 Conexant
89 Conexant Bt868
90 Conexant Bt869
91 Conexant CX25870
92 Conexant CX25871
93 Philips
94 Philips 7100 Family
95 Philips 7102
96 Philips 7103
97 Philips 7108
98 Philips 7109
99 Philips 7108B
100 NVIDIA Integrated
124 Chrontel 7009
125 Chrontel 7010
126 Integrated (MV)
127 Integrated
128 Chrontel 7011
129 Chrontel 7012
130 Red
131 Green
132 Blue
133 All channels
135 Use block transfer
136 Use page flip
137 Auto-select
138 &Contrast
140 Philips 7108A
141 Philips 7109A
142 Philips 7104
143 Philips 7105
144 Conexant CX25872
145 Conexant CX25873
146 Conexant CX25874
147 Conexant CX25875
150 Your flat panel display has a maximum resolution of %u x %u.
151 Windows will now switch your desktop to the selected settings. This may take several seconds. If Windows does not reappear correctly, wait 15 seconds and your original settings will be restored.
152 The screen has been reset to its default position.
153 Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best. It is recommended you set your Screen Resolution to %ux%u.
200 (Combination) N/PAL
201 B/PAL
202 D/PAL
203 I/PAL
204 M(Japan)/NTSC
205 M/NTSC
206 M/PAL
207 N/PAL
208 G/PAL
209 H/PAL
210 K1/PAL
211 B,D,G,H,I/PAL
212 [PAL only]
213 SECAM
214 HDTV
215 HDTV 480i
219 HDTV 1080p
300 Country/Region
301 Format
302 Windows will now set your hardware to match the settings you have specified. The screen may blank for several seconds during this process.\n\nTo avoid potential problems with the hardware, do not turn off your computer during this process!
303 Description
304 Filename
305 Version
306 HDTV 720i
400 Auto-select
401 Composite Video-Out
402 S-Video-Out
403 Direct3D Settings
404 OpenGL Settings
405 Overlay Controls
406 NVRotate
407 nView Display Mode
408 3D Antialiasing Settings
409 Desktop Utilities
410 AGP Settings
411 Performance & Quality Settings
412 Additional Information
413 Refresh Rate Overrides
414 Device Selection
415 Color Correction
416 Flat Panel Display
417 Clock Frequencies
418 TV Output
420 Off
421 2
422 3
423 4
424 5
440 3D Antialiasing Settings
441 Accuview Antialiasing Settings
500 Intel x86 Compatible
501 Intel Pentium(r)
502 Intel PentiumPro(r)
503 Intel Celeron(tm) or Xeon(tm)
504 Intel Celeron(tm)-A
505 Intel Pentium(r) II
506 Intel Pentium(r) III
507 Intel Pentium(r) 4
508 Intel Itanium(r)
509 AMD K5
510 AMD K6
511 AMD K6-2
512 AMD K6-3
513 AMD Athlon(tm)
514 AMD Duron(tm)
515 Cyrix MediaGX
516 Cyrix 6x86 Family
517 Cyrix MII Family
518 IDT WinChip C6
519 IDT WinChip 2
520 with MMX(tm)
521 with 3DNow!(tm)
522 with SSE
523 with SSE2
600 No DirectX installed
601 DirectX 1
602 DirectX 2
603 DirectX 3
604 DirectX 5
605 DirectX 6
606 DirectX 6.1
607 DirectX 7
610 DirectX 8.0
615 DirectX 8.1
616 DirectX 8.2
617 DirectX 9.0 or better
650 Unknown version of DirectX installed
1000 NVIDIA (Unknown)
1001 RIVA TNT
1002 Vanta
1003 TNT2 Model 64
1004 RIVA TNT2
1005 RIVA TNT2 Pro
1006 TNT2 Ultra
1007 GeForce 256
1008 GeForce DDR
1009 Quadro
1010 Aladdin TNT2
1011 GeForce2 MX/MX 400
1012 GeForce2 MX 100/200
1013 Quadro2 MXR/EX
1014 GeForce2 GTS
1015 GeForce2 Ultra
1016 GeForce2 Ti
1017 Quadro2 Pro
1018 GeForce2 Go
1020 GeForce3
1021 GeForce2 MX 100/200
1022 GeForce2 MX 100
1023 GeForce2 MX 200
1024 GeForce2 MX 400
1025 GeForce2 Integrated GPU
1026 Quadro DCC
1027 GeForce3 Ti 200
1028 GeForce3 Ti 500
1029 NV17
1030 NV17-1
1031 NV17-2
1032 NV17-3
1033 GeForce4 440 Go
1034 GeForce4 420 Go
1035 NV17M
1036 GeForce4 420 Go 32M
1037 GeForce4 440 Go 64M
1070 Fixed
1071 Grow Only
1072 Dynamic
1073 NVIDIA nForce
1074 220D SDRAM
1075 420D SDRAM
1076 220D DDR-RAM
1077 420D DDR-RAM
1078 with Dolby(r) Digital
1079 220
1080 420
1081 SDRAM
1082 DDR
1090 Additional OpenGL Properties
1091 Use shutter glasses
1092 Use vertical interlace monitor
1093 Use nView Clone mode
1094 Use on-board DIN connector
1095 Use on-board DIN connector on DAC 1
1096 Use blue-line-code for StereoGraphics(R) products
1100 Color indexed overlays (8 bpp)
1101 RGB overlays (RGB555 format)
1102 Color indexed (8bpp) and RGB555 format
1114 The Full Screen Video Mirror feature requires the nView mode to be set to Clone or Extended Desktop.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1115 Full Screen Video Mirror
1116 The Full Screen Video Mirror feature requires the nView mode to be set to Clone.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1117 Custo&m OpenGL Applications Setting:
1118 Application Settings
1900 Stereo Game Configuration
1901 Game &Name:
1902 Stereo Value Rating:
1903 Stereo Compatibility Rating:
1904 Rating Key: 1 (Excellent) - 5 (Poor)
1905 Co&mments:
1906 A&dvanced Settings...
1907 Configure &Hot Keys...
1908 Help
1909 Close
1910 Advanced Game Configuration
1911 Game Name:
1912 Config Values
1913 Demo
1914 ID Key:
1915 Change...
1916 Clear
1917 Full Game
1918 ID Key:
1919 Change...
1920 Clear
1921 OK
1922 Cancel
1923 &Apply
2000 NVIDIA (Unknown)
2001 RIVA TNT
2002 RIVA TNT2
2003 Vanta
2004 Vanta LT
2005 TNT2 Model 64
2006 RIVA TNT2 Pro
2007 TNT2 Ultra
2008 Aladdin TNT2
2009 GeForce 256
2010 GeForce DDR
2011 Quadro
2012 GeForce2 MX
2013 GeForce2 MX 100
2014 GeForce2 MX 200
2015 GeForce2 MX 100/200
2016 GeForce2 MX 400
2017 GeForce2 MX/MX 400
2018 GeForce2 Go
2019 Quadro2 MXR
2020 Quadro2 EX
2021 Quadro2 MXR/EX
2022 GeForce2 Integrated GPU
2023 GeForce2 GTS
2024 GeForce2 Ultra
2025 GeForce2 Ti
2026 GeForce2 Pro
2027 Quadro2 Pro
2028 Quadro2 Pro
2029 Quadro2 Go
2030 GeForce3
2031 GeForce3 Ti 200
2032 GeForce3 Ti 500
2033 Quadro DCC
2034 NV17
2035 NV17M
2036 GeForce4 440 Go
2037 GeForce4 420 Go
2038 GeForce4 420 Go 32M
2039 GeForce4 440 Go 64M
2040 GeForce4 MX 460
2041 GeForce4 MX 440
2042 GeForce4 MX 420
2043 Quadro4 500/550 XGL
2044 Quadro4 200 NVS
2045 Quadro4 400 NVS
2046 Quadro4 550 XGL
2047 GeForce4 Ti 4600
2048 GeForce4 Ti 4400
2049 GeForce4 Ti 4200
2050 Quadro4 900 XGL
2051 Quadro4 750 XGL
2052 Quadro4 700 XGL
2053 Quadro4 200/400 NVS
2054 Quadro4 500 GoGL
2055 GeForce4 MX 440 with AGP8X
2056 GeForce4 MX 440SE with AGP8X
2057 GeForce4 Ti 4200 with AGP8X
2130 Stereo Properties
2131 Stereo &Enable Mode
2132 Enabled
2133 Enabled by Hot Key
2134 Disabled
2135 Stereo T&ype
2136 Page Flipped
2137 Anaglyph
2138 S&tereo Separation
2139 Beginner
2140 Advanced
2141 25%
2142 Stereo &Gamma Setting
2143 1.0
2144 Stereo &Viewer...
2145 &Medical Test Image...
2146 Advanced Stereo Properties
2147 Hot Key Setup
2148 Laser Sight
2149 &On for Configured Games
2150 O&ff for All Games
2151 LaserSight
2152 100%
2153 &Transparency
2154 &Browse...
2158 Anaglyph Stereo...
2159 Separation
2160 Gamma
2161 Anaglyph
2162 Left Eye
2163 Right Eye
2164 Filter Color Setup
2168 Stereo Setup & Test
2169 &Bit Depth
2170 16 bits per pixel
2171 32 bits per pixel
2172 &Monitor Size
2173 19.0"
2174 &Resolution
2175 1600x1200
2176 S&tereo Refresh Rate
2177 120 Hz
2178 Misc. Options
2179 Always &use Stereo Refresh Rate
2180 &Save Setting
2181 S&et Rate For All Resolutions
2182 Re&vert To Saved
2183 &Launch Test Application...
2184 Game Configuration Hot Keys
2185 &Enable In-Game Configuration
2191 Convergence
2192 Screen Depth
2193 Backplane
2194 Settings and Config
5001 (Empty)
5002 NVIDIA Settings Properties
5003 About
5004 Adjust Display Properties
5005 Custom Direct3D Settings
5006 Custom Color Settings
5007 NVIDIA Settings
5008 Restore Driver Defaults
5009 Restore Hardware Defaults
5010 Unable to start the applet. Please ensure that the software has been properly installed on your system.
5011 NVIDIA Settings
5012 NVIDIA Settings Properties
5013 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start a Direct3D application.
5014 The default Direct3D settings have been restored.
5015 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start an OpenGL application.
5016 The default OpenGL ICD settings have been restored.
5017 Custom OpenGL Settings
5018 Display %u
5019 Unable to find the file NVDESK32.DLL. The Desktop Manager features will be unavailable.
5020 Dynamic link failure in NVDESK32.DLL. The Desktop Manager features will be unavailable.
5021 Program Files
5022 Select an Application
5023 The hot key you have selected is a single key without a CTRL, SHIFT, or ALT key used in combination. Only function keys can be assigned as single-key hot keys.\n\nPlease select a different hot key for this action.
5024 The hot key you have selected is a single key with the SHIFT key as a modifier. You may use a SHIFT+Single-Key combination only if the Single-Key is a function key.\n\nPlease select a different hot key for this action.
5025 The hot key you selected is already in use.\n\nPlease select a different hot key for this action.
5026 nView Desktop Manager
5028 The Desktop Manager is currently enabled, but the system must be\nrestarted to enable all Desktop Manager functionality.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5029 The Desktop Manager is currently disabled, but it will remain in your\ncomputer's memory until the system is restarted.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5031 The settings "%s" have been successfully applied.
5032 The default color settings have been restored.
5040 Desktop Manager Enabled
5042 Desktop Manager Disabled
5044 Desktop Manager Properties
5060 nView Properties
5061 nView Desktops
5062 nView
5063 Enable nView
5064 Disable nView
5065 Open nView control panel
5066 nView Profiles
5070 Rotation Settings
5071 Rotation Enabled
5072 Rotation Disabled
5073 Rotate 0 degrees
5074 Rotate 90 degrees
5075 Rotate 180 degrees
5076 Rotate 270 degrees
5077 The rotation cannot be applied with the current resolution.
5078 Apply color settings to all rotation angles
5079 Applying rotation failed because an active application is blocking the rotation. Please close the application and try again.
5090 Wizard Error - There was a problem accessing your registry -
8002 Color Correction
8006 Device Selection
8014 Vertical flicker
8015 Horizontal flicker
8016 Horizontal luminance flicker
8017 Horizontal chrominance filter
8018 Dynamic flicker filter
8030 Overlay Settings
8037 Disable
8038 Primary display
8039 Secondary display
8040 Auto-select
8041 Track overlay aspect
8042 Source aspect
8043 Full screen
8044 TV 4:3
8045 Anamorphic 16:9
8046 Video Overlay
8047 Video Mirror
8048 Both
8056 Changing your video viewing preference will cause the displays to go blank momentarily on your system\nDo you wish to continue?
8057 Run an application that plays video using Software Overlay to see the effect.
8073 Error initialising Personal Cinema setup.
8074 Click OK to enable Personal Cinema TV Viewing and Video Capture feature.
8079 320 x 200\n400 x 300\n480 x 360\n512 x 384\n640 x 400\n640 x 480\n800 x 600\n848 x 480\n1024 x 768\n1152 x 864\n1280 x 720\n1280 x 768\n1280 x 960\n1280 x 1024\n1360 x 768\n1600 x 900\n1600 x 1024\n1600 x 1200\n1920 x 1080\n1920 x 1200\n1920 x 1440\n2048 x 1536\n
12001 Adjust Z-buffer depth to rendering depth if unequal
12002 Enable alternate depth buffering technique
12003 Display logo when running Direct3D applications
12004 Use DirectX 5 compatibility mode
12005 Force trilinear filtering
12006 6XS
12007 8XS
12008 4XS
12009 (Direct3D only)
12010 8X
12011 16X
12050 Please note that full scene antialiasing and the use of a unified depth buffer or window flipping are mutually exclusive.\n\nIf you wish to enable the unified depth buffer or window flipping, full scene antialiasing will be automatically disabled in the driver.
13000 Enable buffer region extension
13001 Allow the dual planes extension to use local video memory
13002 Use fast linear-mipmap-linear filtering
13003 Enable anisotropic filtering
13004 Enable alternate depth buffering technique
13005 Disable support for enhanced CPU instruction sets
13013 Enable gamma correction for antialiased lines
13100 Always off
13101 Off by default
13102 On by default
13200 Use desktop color depth
13201 Always use 16 bpp
13202 Always use 32 bpp
13210 3D Antialiasing Settings
13211 Save Settings
13212 TV Output
13213 TV Controls
13214 Color Correction
13216 Flat Panel Display
13217 Change TV Format
13218 Device Selection
13219 Direct3D Settings
13220 More Direct3D
13221 OpenGL Settings
13222 OpenGL Stereo
13223 Hardware Options
13224 Restart Required
13225 Clock Frequencies
13226 Testing new settings
13227 nView Display Mode
13228 Monitor Settings
13229 Confirm Display Settings
13230 Warning
13231 Control Panel Exit Required...
13232 System settings change
13233 Device Configuration
13234 Desktop Utilities
13235 Display Timing
13236 Overlay Color Control
13237 Overlay Controls
13238 Full Screen Video Mirror Control
13239 PowerMizer
13240 NVIDIA nForce
13241 NVRotate
13242 Options
13243 About Taskbar Utility
14000 Display driver
14001 DirectDraw driver
14002 OpenGL installable client driver
14003 Resource Manager kernel
14004 Resource Manager 16 bit client interface
14005 Resource Manager 32 bit client interface
14006 VGA virtualization and PnP services VDD
14007 Driver display mode library
14008 Display Properties extension
14009 Taskbar utility library
14010 Display management hook library
14011 Stereo Display Properties Extension
14012 Stereo Resource File
14013 Stereo Test Program
14014 Stereo Image Viewer
14115 PnP services VDD for secondary devices
14116 Display driver miniport
14117 Display management UI library
14118 Display driver helper service
14120 Desktop management hook library
14121 Shell namespace extension library
14122 Desktop management control panel applet
14600 Gfx Driver for 3D Studio MAX
14601 ELSA POWERdraft for AutoCAD 2000
14602 QuadroView Application
14610 Localized resource library
14611 Localized help file
14612 Control Panel Skins library
15000 /
15001 /page/drivers.html
15002 /page/products.html
15003 /page/Newsandevents.html
15004 /page/demos.html
15010 NVIDIA Logo
15011 Monitor with Graphics Board (Blue)
15012 Monitor with Graphics Board (Red)
15110 NVIDIA
15300 CRT
15302 LCD
15304 DFP
15306 Digital Monitor
15308 Analog Monitor
15310 Digital Flat Panel
15312 Analog Flat Panel
15314 Flat Panel Display
15316 Laptop LCD
15318 Laptop Display
15320 Laptop Flat Panel
15322 Laptop Digital Flat Panel
15324 Tablet LCD
15326 Tablet Display
15328 Tablet Flat Panel
15330 Tablet Digital Flat Panel
15332 TV
15334 HDTV
16000 Your hardware settings cannot be applied until you have tested them.\n\nSet the desired clock frequencies and then choose the 'Test New Settings' button to ensure that the hardware can support your selections.
16001 Your graphics hardware will now be tested at the new clock settings for several seconds.\n\nIf your computer stops responding during this time, turn your computer off and then back on.\nYour previous settings will be automatically restored.
16002 You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
16004 %u x %u pixels
16005 %u Hz
16007 Analog Display
16008 Digital Display
16009 TV
16010 A custom setting with this name already exists.\n\n Do you wish to overwrite it with the current setting?
16011 Windows was unable to change your display settings.\n\nPlease close the Display Properties, re-enter and try again.
16020 Device Settings
16021 Device Adjustments
17001 Default Monitor
17002 Plug and Play Monitor
17010 Display Properties
17011 Settings
17012 Reverting in %d seconds
17018 %d by %d pixels
17019 %d Hertz
17020 Windows will now apply your new display settings. This will take a few seconds, during which time your screen may flicker.\n\nIf your new settings are not applied correctly, your original display settings will be automatically restored in 15 seconds.
17021 Display Settings
17022 Custo&m OpenGL settings:
17026 First
17027 Second
17028 Third
17029 Fourth
17030 Fifth
17031 Sixth
17032 Seventh
17033 Eighth
17035 Analo&g Display:
17036 &Digital Display:
17037 &TV:
17038 Analo&g Display
17039 &Digital Display
17040 &TV
17041 TV Encoder Type:
17042 TV Codec Type:
17051 1x
17052 2x
17053 4x
17054 8x
17055 Use these control to select the degree of antialiasing to be used in OpenGL applications.
18079 Select the resolution that you want to use for games.
18080 Select the stereo refresh rate to use when stereo is enabled and the game is played at the resolution indicated by the Resolution slide bar.
18081 Test the display capability of your system at the selected resolution, bit depth, and refresh rate.
18082 The stereo refresh rate setting will be used when a game is played at the adjusted resolution and bit depth settings.
18083 Click to revert the panel settings to the last saved settings.
18084 The set stereo refresh rate will be applied to games played at all resolutions, at this color bit depth.
18085 Select the color bit depth that you want to use for games.
18086 Name of the executable or associated file used to identify this game/demo
18087 Take the current game configurations from the configured game version, and apply them to a new game. Select the new game from the file folder window.
18088 Undo the association of the game configuration to the new game.
18089 Adjust gamma value for Stereo mode.
18090 nView is enabled and currently set to clone mode, please disable clone mode in order to run stereo.
18091 Stereo Enable Error
18092 Enable/Disable fast refresh rate switching
18094 3D laser sight for first-person shooter games. The sight appears on the center of screen with proper visual depth.
18095 Input desired hotkey for selected action.
18097 Select desired action from the list
18098 Press 'Apply' button to save your settings.
18099 Press 'Restore Defaults' button to to restore default key binding.
19000 &Brightness
19001 &Contrast
19002 &Saturation
19003 &Flicker Filter
19004 The NVIDIA System Sentinel is reporting that the NVIDIA-powered graphics card is not receiving sufficient power.
19005 To protect your hardware from potential damage or causing a potential system lockup, the graphics processor has lowered its performance to a level that allows continued safe operations.
19006 The NVIDIA System Sentinel is reporting that your NVIDIA-powered graphics card is operating at an elevated temperature.
19007 To protect your system from overheating and causing a potential lockup, the GPU has lowered its performance to a level that allows continued safe operations. You may notice a performance difference in some applications.
19008 The NVIDIA System Sentinel has changed the operating characteristics of your NVIDIA-powered graphics card.
19009 To protect your computer from erratic functionality or a potential lockup, the GPU has lowered its performance to a level that allows continued safe operations. You may notice a performance difference in some applications. Any number of factors may have contributed to this adjustment. The connection between your graphics card and motherboard may be unreliable, possibly due to temperature. Poorly shielded computer cases can also cause problems.
19010 %d
19011 Performance indicator
19012 Power indicator
19013 Heat indicator
19017 Page-Flipped stereo.
19018 Anaglyphic stereo (use red-blue glasses to view).
19019 Stereo Compatibility Settings
19020 If checked, AA will be forced off when Stereo is active
19021 If checked, Software Vertex Shaders will be used when Stereo is active
19022 If checked, Hardware Transformation and Lighting will be turned off when Stereo is active
19100 Toggle Stereo Default On
19101 Save Image
19102 Increase Separation
19103 Decrease Separation
19104 Increase Gamma
19105 Decrease Gamma
19106 Toggle Stereo Default On
19107 Cycle Frustum Adjustment
19108 Increase Screen Depth
19109 Decrease Screen Depth
19110 Increase Backplane
19111 Decrease Backplane
19112 Write Configuration
19113 Delete Configuration
19114 Increase Convergence
19115 Decrease Convergence
19116 Toggle Auto Convergence
19117 Restore Default Convergence
19118 Suggest Settings
19119 Unsuggest Settings
19120 Force &anti-aliasing always off in Stereo
19121 Force software &Vertex Shaders in Stereo
19122 Force HW &TnL off (DirectX only)
19123 Restore &Defaults
19124 Note: Stereo rendering requires both front and back buffers to be duplicated in memory potentially taking up a significant amount of memory. For example, for 800x600x32 this would add ~2Mb and for 1024x768x32 it would be over 3Mb additional. You can reduce the amount of memory required by reducing either the resolution or the pixel depth.
19125 Separation
19126 Gamma
19127 Convergence
19128 Screen Depth
19129 Backplane
19130 Settings and Config
19134 DDC VGA glasses (IO Display)
19135 Direct 3-Pin DIN VESA Connect
19136 White line code glasses
19137 Blue line code glasses
19138 Vertical Interleaved (SeeReal)
19139 Horizontal Interleaved (VREX)
19140 Vertical Interleaved
19141 Horizontal Interleaved
19142 Anaglyph (Red/Blue Glasses)
19143 Sharp 3D Display
19144 Dual VGA Output (Dep3D)
25000 Allow applications to control the antialiasing mode
25001 Manually select the antialiasing mode
25002 Off (no antialiasing)
25003 2X
25004 Quincunx Antialiasing(tm)
25005 4X
25006 4X, 9-tap Gaussian
25007 4XS (Direct3D only)
25008 Use these sliders to select the degree of antialiasing to be used in Direct3D and OpenGL applications.
25009 &Texture sharpening
25010 Save the current settings as
25011 OK
25012 Cancel
25013 Screen positioning
25014 Up
25015 Left
25016 Right
25017 Down
25018 &Reset
25019 &Contrast
25020 &Saturation
25021 Off
25022 &Flicker filter:
25023 Note: Various settings have been disabled because protected content is being displayed.
25025 Additional &properties...
25026 NVIDIA on the &Internet >>
25027 Processor:
25028 %s
25029 Bus:
25030 BIOS:
25031 Memory:
25032 IRQ:
25033 TV type:
25034 System information
25035 System processor:
25036 CPU
25037 Total physical memory:
25038 %s KB
25039 Free physical memory:
25040 %s KB
25041 DirectX version:
25042 Unknown version of DirectX installed
25043 Driver version information
25044 Graph
25045 &Digital Vibrance:
25046 Medium
25047 Active colo&r channel:
25048 &Brightness
25049 &Contrast
25050 &Gamma:
25051 1.00
25052 Custo&m color settings:
25053 &Save As...
25054 &Delete
25055 &Apply settings to all rotation angles
25056 Restore &hardware defaults
25057 Centering
25058 Click the icons on the desktop image to adjust the screen to the desired position.
25059 Note:\nOn certain displays, the screen may go blank momentarily during adjustment.
25060 Default
25061 Digital flat panel options
25062 These options allow you to determine how lower resolutions are displayed on your flat panel.
25063 Use &display adapter scaling
25064 Use ¢ered output
25065 Use &monitor scaling
25066 Your flat panel display has a maximum resolution of ...
25067 &Regional settings
25068 The proper TV format is based on your locale. Select your locale from the list below.
25069 &Make this format the power-up default
25070 Select the output device on which to display Windows:
25071 A&nalog display
25072 &Digital display
25073 &TV
25074 Format:
25075 Change &format...
25076 Video &output format:
25077 Device adj&ustments...
25078 0
25079 0
25080 0
25081 &Check here if you have a TV connected but it remains unselectable.
25082 &Performance and compatibility options
25083 &Texture anisotropic setting :
25084 0
25085 x
25086 Mipmap detail &level:
25087 PCI texture memory size
25088 &Use up to
25089 MB of system memory for textures in PCI mode.
25090 &Custom direct3D settings:
25091 More direct&3D...
25092 &Texel alignment
25093 This slider lets you position the texel origin between the upper-left corner and the center of the texel.
25094 Value:
25095 7
25096 Upper-left corner
25097 Center
25098 Vertical sync
25099 Vertical sync &mode:
25100 Render &no more than
25101 frame(s) ahead.
25102 &Performance and compatibility options
25103 Default &color depth (for textures):
25104 &Buffer-flipping mode:
25105 &Vertical sync:
25106 Anisotropic &filtering:
25107 &Use up to
25108 MB of system memory for textures in PCI mode.
25109 Custo&m OpenGL applications setting:
25110 Enable &overlay in OpenGL
25111 Enable &stereo in OpenGL
25112 Stereo display &mode:
25113 S&wap eyes (L becomes R, R becomes L)
25114 Current AGP settings
25115 Mainboard chipset:
25116 Intel 440BX
25117 AGP rate:
25118 PCI mode
25119 Aperture size:
25120 256 MB
25121 Side-band addressing:
25122 Enabled/disabled
25123 &Manually select your AGP rate
25124 Note: Selecting the highest AGP rate ensures only that the highest rate supported by your mainboard chipset will be used.
25125 AGP &rate
25126 PCI mode
25127 Depth of request &queue
25128 Auto-select
25129 Specify:
25130 Enable AGP &fast writes
25131 Enable &write combining
25132 Enable &2D command buffer caching
25133 The display mode setting has exceeded the capabilities of the graphics hardware.\n\nPlease select a lower resolution, color depth, or refresh rate for one of your displays. Click OK to continue.
25134 &Don't show me this message again
25135 &Details...
25136 The changes made to the display properties require that the system be restarted for the new settings to take effect.
25137 Before restarting, save any open documents and close all applications.
25138 I &will restart my computer later
25139 Note: Increasing the hardware clock frequencies beyond the manufacturer's recommended settings may cause system instability and possibly damage the hardware.\nUse caution when adjusting these settings.
25140 Allo&w clock frequency adjustments
25141 &Core clock frequency:
25142 &Memory clock frequency:
25143 &Test settings
25144 A&utomatically apply these settings at startup
25145 Restart now
25146 To ensure the proper operation of the clock frequency controls, your graphics hardware configuration must be examined before any adjustments can be made. This requires restarting your computer.
25147 Before continuing, save any open documents and close all applications. If you are using a third-party overclocking utility, disable it before restarting.
25148 Click 'Restart Now' to continue, or click 'Cancel' to return without restarting.
25149 After Windows has been restarted, return to the Clock Frequencies page to make the desired adjustments to the core and memory clock frequencies.
25150 Please wait...
25151 You have chosen to automatically set a clock speed at startup which varies from the hardware manufacturer's default settings.
25152 If these settings prevent Windows from starting properly or cause the system to become unstable, you can bypass the automatic clock setting and force the default hardware values by pressing and holding the CTRL key during startup.
25153 Note: To bypass the automatic clock setting on a computer connected to a network, hold down the CTRL key immediately after logging on to Windows.
25154 &Don't show this message again
25155 nView allows you to connect separate displays to a single graphics card.
25156 nView Modes
25157 &Standard (nView disabled)
25158 &Clone
25159 &Horizontal Span
25160 &Vertical Span
25161 &Display:
25162 &Make this the primary display
25163 Chip Type Text
25164 Detect dis&plays
25165 D&evice settings >>
25166 &Force detection of a monitor on the secondary connector
25167 Disable a&uto-panning on secondary device (viewport lock)
25173 &Hide modes that this monitor cannot display
25174 Unchecking this box allows you to set your display to modes that this monitor cannot display correctly. This may lead to an unusable display and/or damaged hardware.
25175 &Yes
25176 &No
25177 Your desktop has been reconfigured. Do you want to keep these settings?
25178 Reverting in 15 seconds.
25179 You have selected a non-optimal screen resolution setting for your LCD display panel. Selecting this resolution may result in fuzzy text and pictures.
25180 Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best. It is recommended you set your Screen Resolution to %ux%u.
25181 The control panel has applied changes to which other pages on the property sheet may be sensitive. To ensure proper operation, the Display Settings property sheet will now be closed.
25182 Click OK to have the setting modified, or click Cancel to return with your original settings restored.
25183 Note that this change is required in order for the mode that you have selected to work correctly, and can be done automatically by following the instructions below.
25184 &Screen resolution:
25185 res
25186 &Refresh rate:
25187 &Apply
25188 &Display the NVIDIA Settings icon in the taskbar
25189 Select taskbar &icon:
25190 The Desktop Manager provides enhanced nView multi-display functionality and helps you organize your applications for use with multiple displays and desktops.
25192 &Enable Desktop Manager
25193 Desktop Manager &configuration...
25194 Enable Dualview (Treat multiple outputs on an NVIDIA GPU-based card as separate display devices).
25195 &Timing modes
25196 Select the proper timing mode for your display:
25197 Auto-detect (Windows determines the proper mode.)
25198 General Timing Formula (GTF)
25199 Discrete Monitor Timings (DMT)
25201 &Brightness:
25202 100%
25203 &Contrast:
25204 100%
25205 &Hue:
25206 0░
25207 &Saturation:
25208 100%
25209 Enable video &overlay zoom
25210 Select screen region to zoom
25211 Top left
25212 Top right
25213 Center
25214 Bottom left
25215 Bottom right
25216 &Zoom control
25217 Out
25218 In
25219 &Check here if you are having problems with your TV tuner
25220 &Video Mirror Settings...
25221 Full screen device
25222 Disable
25223 Primary display
25224 Secondary display
25225 Auto-select
25226 Aspect &Ratio
25227 Track overlay aspect
25228 Source aspect
25229 Full screen
25230 TV 4:3
25231 Anamorphic 16:9
25232 Enable video &mirror zoom
25233 &Track overlay zoom.
25234 Allo&w driver to select the full screen mode
25235 Tr&ack overlay rotation
25236 Use these sliders to adjust your PowerMizer settings
25237 Maximum power savings
25238 Maximum performance
25239 Frame buffer settings
25240 Frame buffer &mode:
25241 Frame buffer size:
25242 8 MB
25243 Frame buffer management strategy:
25244 Conservative
25245 Aggressive
25246 &Enable rotation support
25247 Landscape (0 degree rotation)
25248 Portrait (90 degree rotation)
25249 Inverted landscape (180 degree rotation)
25250 Inverted portrait (270 degree rotation)
25251 <-
25252 ->
25253 Mouse buttons
25254 Display the NVIDIA Settings menu when clicking...
25255 The &primary mouse button
25256 The &secondary mouse button
25257 &Either the primary or the secondary button
25258 Confirmation
25259 By default, NVIDIA Settings displays a confirmation message when a custom 3D setting is applied.
25260 &Do not display confirmation messages.
25261 3D menus
25262 Display &menus with a 3D appearance.
25263 Copyright (c) 1998-2003 NVIDIA Corporation
25264 Total physical memory available:
25265 Free physical memory:
25266 NVIDIA taskbar utility
25267 Windows needs to be restarted before the Desktop Manager can be launched. A restart is required only the first time that Desktop Manager is lauched after the software is installed.
25268 Before continuing, save any open documents and close all applications.
25269 Click 'Restart Now' to continue, or click 'Cancel' to return without restarting.
25270 The control panel must change the state of the 'Hide modes that this monitor cannot display' setting on the Monitor page of this display adapter.
25271 &Restore defaults
25272 The NVIDIA Settings taskbar utility lets you conveniently access various features and presets you've configured in the Display Properties directly from the Windows taskbar.
25273 Desktop color controls
25274 Enable TV Viewing and Video Capture
25275 Restore non-personal cinema setting
25276 Video viewing preference
25277 On TV
25278 On CRT
25279 Screen size
25280 Aspect ratio
25281 Full screen video mirroring controls
25282 The Personal Cinema device is not attached. Please click OK to enable your Personal Cinema device and to switch your primary display setting.
25283 Frame buffer location:
25284 For fastest start-up time
25285 For fastest graphics performance
25286 You must restart your computer before the new settings will take effect.
25290 Capabilities
25291 NVIDIA GPU :
25292 Actual :
25293 AGP &rate
25294 &Fast writes
25295 &Sideband addressing
25296 Enable &2D command buffer caching
25297 &Depth of request queue
25298 Auto-select
25299 Specify:
25300 &Test configuration
25301 SBA
25302 FW
25303 AGP disabled
25304 AGP %dX
25305 AGP %d.%d
25306 %s chipset :
25307 Max request queue depth: %d
25308 disabled
25309 Intel
25310 VIA
25311 AMD
25312 RCC
25313 Micron
25314 NVIDIA
25315 Unknown
25316 VESA BIOS information
25317 Vendor:
25318 Product:
25319 Version:
25320 System memory
25321 Available physical memory:
25322 Available virtual memory:
25323 Default
25324 Maximum performance
25325 &Apply to desktop
25326 &Save As...
25327 &Delete
25328 &Restore Defaults
25331 Balanced
25333 &Texture quality
25334 Low
25335 Default
25336 High
25337 Antia&liasing
25338 Off
25339 2X
25340 Quincunx
25341 4X
25342 4X,9-tap Gaussian
25343 A&nisotropic filtering
25344 Off
25345 1X
25346 2X
25347 4X
25348 8X
25349 AGP Settings
25350 Additional Information
25351 Performance & Quality Settings
25352 System Performance
25353 Multi-display &hardware acceleration:
25355 Refresh Rate Overrides
25356 Applications &control refresh rate
25357 &Override refresh rates
25370 Temperature Settings
25371 GPU core temperature:
25372 Core slowdown threshold
25373 &Degrees:
25374 Ambient temperature:
25375 Scale
25376 &Fahrenheit
25377 &Celsius
25378 Enable heat indicator &warning when threshold exceeded
25379 Display core temperature in system &tray area
25380 &Log settings
25381 Temperature level
25390 Force fan on
25391 Apply settings at &startup.
25392 Adapter information
25401 Balanced
25402 Current power source:
25403 Current power level:
25404 Current battery charge
25407 Battery
25408 AC outlet
25409 Maximum power savings
25410 Maximum performance
25420 Image sharpening
25423 PowerMizer setting only affects 3D performance when running on battery.
25424 The gamma ramp has been changed outside of the control panel. Any modification here will erase those changes.
25425 Stereo
25426 Overlay
25427 Exported pixel &types:
25430 Force high-res Z-Buffer
25431 Prune texture format list
25432 Reduce pixel and vertex shader support
25433 Prune mode list
25434 Flush after blit
25435 Enforce blit wait flag
25436 Prune OGL extension string
25437 Legacy OGL support
25438 Troubleshooting
25439 Send troubleshooting report to NVIDIA
25450 About NVIDIA settings...
25451 Exit
25460 Single-Display mode
25461 Multi-Display Compatibility mode
25462 Compatibility (GCD architecture) mode
25463 Multi-Display Performance mode
25464 Performance (GCD architecture) mode
25465 nView Clone/Span mode
25500 Custom resolutions
25501 A&dd
25502 &Modify
25503 &Test
25504 &Remove
25505 Allow &panning
25506 &X
25507 &Y
25508 &Refresh
25509 &Color
25510 Standard modes:
25511 Custom modes:
25512 Device modes:
25513 Custom resolutions && virtual screens
25520 Custom resolutions
25521 Ignore &Color
25522 Ignore &Refresh
25523 &Screen resolution
25524 Less
25525 More
25526 %u by %u pixels
25527 &Color quality
25528 Highest (32 bit)
25529 Medium (16 bit)
25530 Lowest (8 bit)
25531 Custom Resolutions
25532 Custom resolutions and refresh rates
25533 Last attempted mode:
25534 Auto-Correct
25535 Change Resolutions
25550 Optimize TV for full screen video
25551 Full screen video options
25552 Full screen video
25560 Fixed aspect ratio timing
25600 ClearView allows you to enable multiple displays. Select a particular device combination and select the preferred display that is most in use.
25601 ClearView modes
25602 Select &display configuration
25603 Preferred display follows mouse
25604 &Preferred display
25605 Preferred display &refresh
25606 1x
25607 2x
25608 3x
25609 ClearView
25620 HDTV 480p
25621 HDTV 720p
25622 HDTV 1080i
25623 Component YPrPb
25630 &Test new settings
25631 Auto-&detect
25632 &Optimize clock
25633 Auto-&clocking
25634 Set&tings
25635 Standard (2D)
25636 Performance (3D)
25637 Disable hardware overlay
25638 Use fixed aspect ratio scaling
25640 &Set pan-scan resolution
25641 &Monitor native support
25642 &Override application
25650 Image settings
25651 Antialiasing settings
25652 Anisotropic filtering
25653 Application-controlled
25654 Best quality
25655 Best performance
25656 Override application settings
25660 &Image settings
25661 Application
25662 Quality
25663 Performance
25671 Mode:
25672 Display pair:
25673 Single display
25674 Clone
25675 Horizontal Span
25676 Vertical Span
25677 The test failed to run at the selected clock frequencies. Please lower your settings and try again.
25678 An error has occurred in running clock frequency test. Your computer needs to be restarted.
25679 Enable &doublescan for lower resolution modes
25680 %u GHz
25681 VMR 7 support
25682 Timestamp
25683 Event ID
25684 Event
25685 Treat this system as &server
25686 &Leading edge
25687 Re&fresh rate (Hz):
25688 &Falling edge
25689 Sync &delay (us):
25690 Frame synchronization options
25691 House sync
25692 Incoming rate (approx):
25693 &Outgoing sync interval:
25694 Sync and connection status
25695 Sync ready
25697 Timing
25698 Stereo sync
25699 In
25700 Out
25701 House sync
25702 &Test link
25703 Frame Synchronization
25704 Framelock board connection problem
25705 Either an Ethernet LAN cable is connected to the framelock board or the linked computer is not turned on. Either disconnect the Ethernet LAN cable or turn on the linked computer for proper operation.
25707 Composite Auto-Detect
25708 TTL
25709 Composite Bi-level
25710 Composite Tri-level
25711 Treat this system as &client
25712 Frame synchronization refresh rate mismatch
25713 The frame synchronization device is requesting a refresh rate of %d Hz. The nearest available refresh rate supported by the active graphics card and display combination is %d Hz.
25714 Detect
25715 (display not synchronized)
25716 (using internal timing)
25717 (display synchronized)
25800 To remedy the problem, ensure that your NVIDIA graphics card in your system has the supplemental power connector attached. This connection is required and your system may be damaged if it is not in place. Please refer to your owner's manual for complete inspection instructions. Also, the power supply in your computer must be able to supply ample power to power all of the attached peripherals in addition to this extra connection.
25801 To remedy the problem, ensure that the NVIDIA graphics card in your system has ample space between it and other add-in cards in your system. Improper ventilation in you computers housing can contribute substantially to the system's overall temperature, causing various temperature-sensitive subsystems to function erratically or even fail.
25802 To remedy the problem, ensure that all parts of the system are properly ventilated, and the power supply has ample power to supply all connected equipment. Also, various motherboard BIOS settings may need adjustment for proper operation of the graphics card interface.
25810 Problem report
25811 &Troubleshoot
25820 Troubleshooting
25830 Full Screen Video
25831 Dualview
25832 &Hide modes that this monitor cannot support
25833 Display custom modes only
25834 &Identify
25835 None
25836 Current display
25838 HiRes desktop scaling
25839 from %d x %d to %d x %d
25840 Load the current settings from
25841 Load settings
25842 &VMR 7 Support
25843 Full screen video options
25844 Projected blending apply
25845 Projected blending may take several seconds to start because the nView services are currently disabled and will need to be automatically restarted in order to enable projected blending.
25846 A session of NVIDIA control settings is already running!
25847 NVIDIA Control Settings
25848 Unable to create critical resource
25849 Use centered output
25850 Optimize for DVD
25851 Optimize for desktop
25852 Custom (default)
25853 Optimize TV
25854 Presets
25855 Saturation
25856 Brightness
25857 Contrast
25858 Flicker filter
25859 Click 'Override refresh rates' to select refresh rate overrides to be used in applications.
25860 Default
25861 Hertz
25862 &Initialize link
25863 Chrontel 7000 family
25864 Philips 7100 family
25865 NVIDIA integrated
25866 Integrated (MV)
25867 Integrated
25868 Cyrix 6x86 family
25869 Cyrix MII family
25870 Overdrive
25871 Overscan shift
25900 Desktop Overlap and Edge Blending
25901 Enable &desktop overlap
25902 Overlapped size horizontal
25903 Overlapped size vertical
25904 pixels
25905 Enable projected &blending
25906 &Horizontal
25907 &Vertical
25908 Horizontal roll off
25909 Vertical roll off
25910 Horizontal luma
25911 Vertical luma
25912 E&xport profile
25913 &Import profile
25914 Export profile
25915 Import profile
26010 &In the future, do not show this message.
26011 You have chosen to override application controls for anisotropic filtering.\n\nOverriding this setting is intended ONLY for applications that do not expose anisotropic settings.\n
26012 You have chosen to override application controls for antialiasing.\n\nOverriding this setting is intended ONLY for applications that do not expose antialiasing settings.\n
26013 Application-controlled
26014 Off
26015 2x
26016 4x
26017 8x
26018 4xG
26019 2xQ
26020 4x9T
26021 4xS
26022 6x
26023 16x
26024 High performance
26025 Performance
26026 Quality
26030 Hz
26031 &Properties...
26032 Enter custom resolution values here. To enter a refresh rate that does not appear in the list, you may type it in.
26033 The custom resolution property shows all available display settings for the selected resolution.
26034 &Only show custom modes
26035 Custom resolution settings
26036 Screen refresh rate:
26037 Width:
26038 Height:
26039 All available
26040 Standard refresh rates
26041 The custom resolution input is invalid.
26042 The custom resolution has been added. successfully.
26043 The custom resolution cannot be added.
26044 The custom resolution has been removed. successfully.
26045 The custom resolution cannot be removed.
26046 %d Hertz
26047 %d bit
26048 Color quality:
26049 Monitor settings
26050 My connected TV does not appear in this list.
26051 Signal format:
26052 Connection:
26053 Select the output device on which to display Windows:
26054 Changing to this HDTV format may cause the Windows Start button to appear outside of the visible desktop. Overscan shift will track the mouse cursor and move the visible desktop as you move the mouse cursor.\n\nDo you want to use the Overscan shift feature?
26055 Changing to this HDTV format may cause the Windows Start button to appear outside of the visible desktop. Underscan will scale down the Windows desktop, allowing you to see the full desktop.\n\nDo you want to use the underscan feature?\n\nNOTE: Enabling Underscan will change (reduce) your Windows screen resolution to %dx%d.
26056 HDTV Overscan Configuration
26057 Use underscan to show the entire Windows desktop.
26058 Use 'Overscan shift' to show the entire Windows Desktop as you move your mouse cursor.
26059 Keep the native HDTV resolution
26060 Changing to this HDTV format may cause the Windows Start button to appear off-screen.
26061 Your attempt to change current nView display mode\nsettings failed - Error Code %d
26062 Coordinated Video Timings (CVT) Standard
26063 Remember my preference for the selected format
26064 Enabling underscan will reduce your Windows screen resolution from %dx%d to %dx%d.
26065 The choice you have selected will reduce your screen resolution from %dx%d to %dx%d. Do you want to fine-tune this resolution?
26066 Always use this setting
26067 Capability
26068 GPU
26069 Chipset
26070 OS
26071 Optimal
26072 AGP version
26073 Max AGP rate
26074 Max request queue depth
26075 Fast writes
26076 Sideband addressing
26077 Yes
26078 No
26079 Other settings
26080 Your optimal AGP configuration is determined by the capabilities of your operating system, GPU, and motherboard chipset.\n\nYou can choose to override the optimal configuration settings below.
26081 The test failed to run with the selected configuration. Your AGP configuration was reset to the default.
26082 The test passed with the selected configuration.\n To apply your AGP settings, click Apply
26083 Screen Menus
26084 Remove infrequently used screens by dragging them from the NVIDIA screen menu to the list below. Restore screens to the menu by dragging them individually, or click Restore Defaults.
26085 To begin, check the Enable Screen Menu Editing check box. To return to normal navigation mode, uncheck the check box.
26086 E&nable screen menu editing
26087 (No screens have been removed from the screen menu.)
26088 \nAccelerated Graphics Port (AGP) configuration problem was encountered.
26089 \nTo protect your system from data loss and potential lockup, Accelerated Graphics Port (AGP) configuration was set to the default. You may notice a performance difference in some applications.
26116 Load color correction curves from ICC profile filename:
26117 ICC color correction profiles (*.icm;*.icc)|*.icm;*.icc|All Files (*.*)|*.*||
26118 This will discard the color correction settings you specified using the previous method. Continue?
26119 &Do not prompt me again
26120 &Undo
26121 &Redo
26122 Cu&t
26123 &Copy
26124 &Paste
26125 &Delete
26126 Select A&ll
26127 What's this?
26130 &Insert Point
26131 &Delete Point
26132 &Delete Points
26133 Cha&nnel
26134 RGB
26135 &Red
26136 &Green
26137 &Blue
26138 Grid Si&ze
26139 Show only physical panning resolutions
26140 Physical resolution
26141 Frame queue limit
26142 Not available
26150 Install Dualview (Advanced)
26151 The Windows 2000 Dualview device will now\nbe installed. You must restart your computer.\nPlease close all open applications and click\n OK to continue.
26152 Please select your application here :
26154 Incoming sync ty&pe:
26155 Sync to field 1
26156 Auto
26157 Auto (%.2f)
26158 House sync
26165 Maximum system memory for PCI mode textures:
26166 MB
26167 &Display adapter scaling
26168 &Centered output
26169 &Monitor scaling
26170 &Fixed aspect ratio scaling
26171 To conserve battery power, SmartDimmer allows you to control the brightness of your display while it is active or idle.
26172 Enable SmartDimmer (while using battery only)
26173 Brightness while active:
26174 Min
26175 Max
26176 Brightness while idle:
26177 Current brightness
26178 SmartDimmer
26179 An attempt to detect your connected displays has been made. If you do not observe positive results, you are advised to restart you system. If you continue to observe a problem, please contact Customer Support for further assistance
26180 Overlay zoom controls
26181 Overlay color controls
26182 Full screen video zoom controls
26183 Full screen video controls
26184 Screen Adjustment
26185 TV Settings
27174 Full Screen Video
27328 The test failed to run with the selected configuration. Your AGP configuration was reset to the previous value.
