25005 This product and/or its use may be covered by one or more of the following patents: %s Additional patents may be pending. Please refer to www.powerquest.com/legal_notices/en.html for additional information about PowerQuest's patents.
25006 About %s
25007 This product is licensed to:
25008 Warning: This computer program is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under the law.
25009 Windows sockets initialization failed.
25010 0% Complete
25011 0 min
25012 %.1f Bytes
25013 %.1f GB
25014 %.1f KB
25015 %.1f MB
25016 %.2f GB
25017 &About %s...
25018 About DIRun
25019 &About Disk Operations
25020 According to capacity, using &linear scaling
25021 According to capacity, using logarith&mic scaling
25022 &Add...
25023 Additional Passwords
25024 &Add new file to the list Ins
25025 Add Schedule -
25026 After
25027 After deleting partition:
25028 After deleting the partition, do you want to resize other partitions on that drive to fill in the unallocated space?
25029 &All the same size
25030 Animate1
25031 An &existing drive
25032 Apply changes before exiting?
25033 IMPORTANT: Ready to apply requested partitioning operations. To view list of operations, click 'Details' below.
25034 Archive
25035 Attributes:
25036 A map of your system's disks:
25037 A new pa&rtition (which %s will create)
25038 &Setup Wizard
25039 Backup image settings:
25040 Backup Location
25041 Batch file '%s' written successfully.
25042 Before
25043 Before deleting partition:
25046 &Boot Disk Builder
25047 &Browse...
25048 Error changing current dir to %s.
25049 %s already exists. Do you want to replace it?
25050 Select D&estination
25051 Select D&estination
25052 Select D&estination
25053 &Help
25054 &Help
25055 &Help
25056 &Options
25057 &Options
25058 &Options
25059 O&verview
25060 O&verview
25061 O&verview
25062 Select &Drives
25063 Select &Drive
25064 Select &Image File
25065 &Calculate Partition Size...
25066 Calculate Partition Size
25067 &Cancel
25068 Cancel
25069 Cancelling
25070 Cannot copy drives as primaries or logicals.
25071 Cannot copy drive(s)
25072 Cannot copy '%s' to '%s'.
25073 Cannot create '%s'.
25074 Cannot create folder '%s'.
25075 Cannot delete '%s'.
25076 Cannot find unallocated space.
25077 Cannot prepare machine for reboot. Exit code %ld.\n\nYou must run %s from DOS or from the Rescue Diskettes.
25078 Cannot resize drive.
25079 Cannot restore drives as primaries or logicals.
25080 Cannot update '%s'.
25081 Unable to open RTC file %s.
25082 CD/RW Drive
25083 CD Drive
25084 Chec&k for file system errors
25085 Chec&k for file system errors
25086 Cleaning Up...
25087 Click 'Finish' to accept this change to your disk.
25088 Click 'Next' to accept this change to your disk.
25089 Click 'Select Destination' to choose where to store image
25090 Click 'Select Drives' to choose drives to image
25091 Click 'Select Drives' to choose drives to copy
25092 Clone Destination
25093 Clone Options
25094 Close
25095 Close 'Create Image' and open 'Create New Partition' wizard.
25096 Exit program without performing any operations
25097 Create drive
25098 Delete drive
25099 Delete all drive from the selected Hard Disk
25113 Shows currently selected destination, target and copying options
25114 View currently selected image file, drives that will be restored and restore operation settings
25115 Schedule image creation in the future, schedule regular backups, etc...
25116 Set drive active
25117 Select drives to be added to the image file
25118 Drive to copy
25119 Select image file with drives to restore
25120 Compression:
25121 High
25122 Compression Level:
25123 &Compression level
25124 Low
25125 No compression
25126 Confirmation
25127 Are you sure you want to cancel?
25128 Conf&irm password:
25129 Contact &Information
25130 Contains:
25131 &Contents
25132 &Continue
25133 &Copy
25134 Copy Drives
25135 &Copy Drives
25136 Copy drives as:
25137 Copy all drives as logical drives
25138 Copy all drives as primary drives
25139 Click here to go to 'Select D&estination' screen.
25140 Click here to go to 'Select &Drives' screen.
25141 Copy %s
25142 You must select the destination to copy the drive(s) to.
25143 You must select one or more drives to copy.
25144 &Create
25145 Created:
25146 Compression level
25147 &Create a new drive to save the image file to...
25148 Would you like to proceed and create the image?
25149 Click here to go to 'Select D&estination' screen.
25150 Click here to go to 'Select &Drives' screen.
25151 Create Image
25152 Create &Image
25153 Create Image File
25154 Create New &Partition
25155 Create Partition
25156 You must select the destination and file name for your image before you can finish.
25157 You must select one or more drives to include in the image.
25158 Creating image of D:
25159 Currently Scheduled &Tasks
25160 Currently selected settings
25161 Current label:
25162 Current state of disk
25163 This image was created by the Setup Wizard in %s on %s.
25164 BACKUP
25165 &Delete
25166 Delete Drive Wizard
25167 Are you sure you want to delete '%s'?
25168 Are you sure you want to remove the folder '%s' and all its contents?
25169 Dele&te Partition
25170 Deletion of image file source partition is not allowed.
25171 Destination cannot be a copy destination.
25172 The selected Destination Partition contains the\nimage file being restored, and cannot be replaced.\n\nChoose another destination partition.
25173 Destination Options
25174 &Details...
25175 &Details
25176 Discard all operations
25177 &Disk Operations
25178 Disk Operations
25179 Display drives in the disk map:
25180 Don't mount
25181 &Don't show this again
25182 DOS restart options
25183 Drives will be copied with the following options:
25184 Drives will be restored with the following options:
25185 Drive %s is not accessible.\n\nThe device is not ready.
25186 &Drive letter:
25187 Drive Letter Conflict Detected.
25188 Drive Map
25189 Duplicate Disk - Overview
25190 Duplicate Drives - Select Drives
25191 %d Bytes
25192 %d KB
25193 %d MB
25194 %d operations are currently pending.
25195 E&dit...
25196 &Edit Image Filename
25197 Edit Image Filename
25198 &Enter description for this image file:
25199 Enter the new size for the drive:
25200 Error
25201 Unable to analyze your system.
25202 Cannot redistribute free space.
25203 Cannot apply changes without rebooting
25204 Cannot commit changes
25205 Cannot create backup image: source or destination not valid.
25206 Unable to create new directory %s
25207 Cannot create extended partition.
25208 Cannot create image to removable media: source partitions not valid.
25209 Unable to create a logical drive in the selected destination space
25210 Cannot create new partition.
25211 Cannot create new partition: Invalid Operating System
25212 Cannot create new partition: Unable to create logical or primary partition.
25213 Cannot create partition: Errors initializing max and min values.
25214 Cannot create new partition: There is not enough free space on your disk.
25215 Cannot create new partition: There is not enough freespace on your disk. To fix this problem, you may want to try using a higher compression level.
25216 Cannot create a partition with a filesystem type of %s.
25217 Unable to rename file '%s'
25218 Cannot resize extended partition.
25219 Cannot start progress
25220 Error commonui
25221 Error disks
25222 Cannot store the image on the same drive that is being imaged or too small to hold the image.
25223 Cannot rename %s: A file with the name you specified already exists. Specify a different file name.
25224 Error %d.\n%s
25225 Error initializing engine globals
25226 Error initializing engine
25227 Could not delete extended partition on disk %d.
25228 You must select a backup location.
25229 You must select at least one drive to back up.
25230 You must select a partition to backup to.
25231 You must select the removable media to backup to.
25235 Please select a drive to perform an operation on, first
25236 The selected drives will not fit in the unallocated space.
25237 Please select Yes or No.
25238 Cannot start progress dialog
25239 Unable to copy a drive to the selected destination space.
25240 Unable to restore a drive to the selected destination space.
25241 Error
25242 Error volumesets
25243 Resizing or moving an operating system partition\nbeyond the 1024 cylinder boundary may make the\ncomputer unbootable. Due to INT13 BIOS limitations\non some machines, your rescue diskettes may not be\nable to recover from this situation.\n\nSee 'Creating Bootable Partitions' in the user guide for more\ninformation on operating system limitations. Moving all or\npart of an operating system partition above the specified\n'Boot Code Boundary' is not recommend.
25244 Operation will result in too many primary partitions\non destination drive.
25245 Estimated image size:
25246 Estimated Time Remaining:
25247 Evaluation Version
25248 E&xit
25249 Extended Partition
25250 Item selected is not unallocated space.\n\nDisk Images can only be restored into existing unallocated space.\n\n
25251 Filename:
25252 FileOps
25253 Files of &type:
25254 File Folder
25255 File &name:
25256 %s Properties
25257 File Size must be between 10,000,000 and 2,147,483,647 bytes.
25258 &File system colors
25259 File %s is being created.
25260 File %s needs to be opened.
25261 File %s needs to be updated.
25262 File %s not found
25263 %s File
25264 All Files (*.*)
25265 PowerQuest Image Files (*.pqi)
25266 PowerQuest Image Files (.pqi)| *.pqi||
25267 &Finish
25268 Finish
25269 FolderOps
25270 %s Properties
25271 Unable to delete '%s'
25272 Unable to delete folder '%s'
25273 Are you sure you want to delete '%s'?
25274 Are you sure you want to delete the folder '%s' and all its contents?
25275 \%m%d%y.pqi
25276 Operation %d of %d
25277 MyBackup.pqi
25278 %d
25279 %I64d MB
25280 %s
25281 %s (%s:)
25282 Disk %d\n%s
25283 %s (%s)
25284 Disk %d\n%I64d sectors
25285 \par\par\pard\fi-360\li720\tx720\'b7\tab Check for file system errors:\tab\tab\b %s\par\pard\fi-360\li720\b0\'b7\tab Hide source drives after copy:\tab\tab\b %s\par\b0\'b7\tab Skip bad sector checks:\tab\tab\b %s\par\b0\'b7\tab Verify disk writes:\tab\tab\tab\b %s\par\b0\'b7\tab Hide destination drives after copy:\tab\b %s\par\b0\'b7\tab Resize drives to fill entire space:\tab\b %s\par\b0\'b7\tab %s\par
25286 \par\par\pard\fi-360\li720\tx720\'b7\tab Check for file system errors:\tab\tab\b %s\par\pard\fi-360\li720\b0\'b7\tab Hide source drives after copy:\tab\tab\b %s\par\b0\'b7\tab Skip bad sector checks:\tab\tab\b %s\par\b0\'b7\tab Verify disk writes:\tab\tab\tab\b %s\par\b0\'b7\tab Hide destination drives after copy:\tab\b %s\par\b0\'b7\tab Resize drives to fill entire space:\tab\b %s\par\b0\'b7\tab %s\par
25287 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16Drives to copy:\tab\b %s\par\b0\par Destination:\tab\b %s\par\b0\par Options:%s}
25288 Engine error %d
25289 Error #%d
25290 %s\nFile not found.\nPlease verify the correct filename was given.
25291 %ld Files, %ld Folders
25292 %ld KB
25293 %I64d MB
25294 Local Drive
25295 %I64d MB
25296 New Folder
25297 \\.\disk%d.part%d
25298 \par\par\pard\fi-360\li720\tx720\'b7\tab Compression level:\tab\tab\b %s\par\pard\fi-360\li720\b0\'b7\tab Password protected:\tab\b %s\par\b0\'b7\tab Split image into multiple files:\tab\b %s\par\b0\'b7\tab Check for file system error:\tab\b %s\par\b0\'b7\tab Verify disk writes:\tab\tab\b %s\par\b0\'b7\tab Verify image contents:\tab\b %s\par\pard\b0\par
25299 \par\par\pard\fi-360\li720\tx720\'b7\tab Compression level:\tab\tab\b %s\par\pard\fi-360\li720\b0\'b7\tab Password protected:\tab\b %s\par\b0\'b7\tab Split image into multiple files:\tab\b %s\par\b0\'b7\tab Check for file system error:\tab\b %s\par\b0\'b7\tab Verify disk writes:\tab\tab\b %s\par\b0\'b7\tab Verify image contents:\tab\b %s\par\pard\b0\par
25300 Value has to be within %d MB to %d MB range
25301 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16Selected drives:\tab\b %s\par\b0\par Image file location:\tab\b %s\par\b0\par Image options:%s}
25302 %s (%s:)\n%s, %s
25303 %s (%c:)\n%I64d sectors, %s
25304 %d%% Complete
25305 Disk %d
25306 Ready to create an image of drive(s) %s, and write data to disk image file %s
25307 Ready to restore drives %s from image file: %s
25308 \par\par\pard\fi-360\li720\tx720\'b7\tab Resize partition to fill entire space:\tab\b %s\par\pard\fi-360\li720\b0\'b7\tab Check for file system error:\tab\tab\b %s\par\b0\'b7\tab Skip bad sector checks:\tab\tab\b %s\par\b0\'b7\tab Verify disk writes:\tab\tab\tab\b %s\par\b0\'b7\tab Hide drives after restore:\tab\tab\b %s\par\b0\'b7\tab %s\par
25309 \par\par\pard\fi-360\li720\tx720\'b7\tab Resize partition to fill entire space:\tab\b %s\par\pard\fi-360\li720\b0\'b7\tab Check for file system error:\tab\tab\b %s\par\b0\'b7\tab Skip bad sector checks:\tab\tab\b %s\par\b0\'b7\tab Verify disk writes:\tab\tab\tab\b %s\par\b0\'b7\tab Hide drives after restore:\tab\tab\b %s\par\b0\'b7\tab %s\par
25310 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16Restore drives:\tab\b %s\par\b0\par From image file:\tab\b %s\par\b0\par Destination:\tab\b %s\par\b0\par Restore Options:%s}
25311 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16 Restore drives:\tab\b %s\par\b0\parFrom the image file:\tab\b %s\par\b0\parDestination:\tab\b %s\par\b0\par
25312 Yes, split image into %d MB files
25313 Operation (%d of %d)
25314 Unallocated space
25315 Unallocated space - %s
25316 Unallocated space before %s
25317 Unallocated space after %s
25318 Unallocated space in extended partition after %s
25319 Unallocated space after %s and before %s
25320 Free space
25321 Free space:
25322 Full path:
25323 PQ_DIWIN.pqb
25324 DIDefs\
25325 .qid
25326 &Go Back
25327 Go to '&Select Drives' page to change selection
25328 Hard Disk
25329 Unallocated space
25330 Comment
25331 Comment
25332 Creation Date
25333 Description
25334 Disk
25335 Disk
25336 Physical Disks
25337 Size
25338 Drive
25339 Existing drives
25340 Drives
25341 Enabled
25342 File
25343 Folder
25344 Free
25345 Free Space
25346 Available size
25347 Type
25348 &Label
25349 Name
25350 Partition number
25351 Hard Drive
25352 Pri/Log
25353 Name
25354 Size
25355 Status
25356 Total
25357 Type
25358 Free
25359 Used
25360 Used
25361 Used space
25362 Volume
25363 Volumes
25364 Help
25365 &Help
25366 Hidden
25367 \\.\disk%d.part%d
25368 &Hide
25369 &Hide/unhide partition
25370 H&ide destination drives after copy
25371 &Hide partition
25372 Hide so&urce drives after copy
25373 Hi&gh
25374 To calculate recommended size based on the size of an image, click Calculate Partition Size.
25375 Restore as:
25376 &Icons
25377 If the folder does not already exist it will be created.
25378 If you would like %s to help you set up your computer you may run one or both of the following wizards.
25379 &Ignore
25380 Image&Explorer
25381 Image file contains multiple passwords; enter additional password.
25382 Image File:
25383 Image file
25384 &Image filename:
25385 Image filename
25386 Image file cannot be saved to an existing local drive.
25387 Image file co&mment:
25388 &Image file comments:
25389 Image File Comments:
25390 'Image file comment' cannot be longer than %d characters.
25391 Image File Date/Time:
25392 %s Properties
25393 Image is valid.
25394 Image size estimate:
25395 Image Validation
25396 &Index
25397 Information
25398 The Setup Wizard below may need to modify your disk to create a backup location.
25399 Therefore, it is recommended that you do an initial backup to removable media such as CD-R/W.
25400 Initial Backup Wizard
25401 &Initial Backup Wizard
25402 Init failed
25403 Insert the first media of the image set into drive %s.
25404 Insert the last media of the image set into drive %s.
25405 insert media
25406 Insert media %i containing file %s into drive %s.
25407 Insert a new media into drive %s.
25408 Insert a new media %i for file %s into drive %s.
25409 Insert the next media in drive %s.
25410 Insert the media containing file %s into drive %s.
25411 Insufficient space to use as destination.
25412 Invalid destination selected.
25413 Invalid source drive selected.
25414 '%s' is an invalid task name.\n\nA filename cannot contain any of the following characters:\n\ / : * ? < > |
25415 Keep original Primary/Logical designation of the drives
25416 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Arial;}}\n{\colortbl ;\red36\green62\blue130;}\n\viewkind4\uc1\pard\cf1\b\f0\fs20 Confirm creation of new partition\cf0\b0\par\n}
25417 The new partition will be created at the beginning of the unallocated space as a %s, %s partition.
25418 Label Drive
25419 Label Partition %s
25420 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Arial;}}\n{\colortbl ;\red36\green62\blue130;}\n\viewkind4\uc1\pard\cf1\b\f0\fs20 Confirm redistribution of free space\cf0\b0\par\n}
25421 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\b\f0\fs24 Confirm drive resize\b0\fs20\par}
25423 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\b\f0\fs24 Select drive\b0\fs20\par}
25424 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Arial;}}\n{\colortbl ;\red36\green62\blue130;}\n\viewkind4\uc1\pard\cf1\b\f0\fs20 Specify partition size and label\cf0\b0\par\n}
25425 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\b\f0\fs24 Select new size\b0\fs20\par}
25426 Verify disk &writes
25427 Last modified:
25428 Launch &Tutorial
25429 &List
25430 Location:
25431 &Look in:
25432 &Low
25433 Low
25434 Maximum size:
25435 Max size = %d MB
25436 MB
25437 %d MB/min
25438 The media does not contain the correct file.
25439 Passwords you have entered don't match
25440 You may want to consider purchasing a second hard disk, or some type of removable media (such as a CD-R/W) to use as a backup location.
25441 File "%s"" already exists. Do you want to replace it?\nWARNING: Existing data in file will be lost.
25442 One or more of the operations you have made require rebooting to complete.\nIf you click Yes, the computer will reboot to perform the disk operations.
25443 Message Text
25444 Microsoft Task Scheduler must be installed and started to use this feature.
25445 Minimum size:
25446 More than one disk
25447 Multple drives and have removable media
25448 Multple drives and no removable media
25449 'Task Name' cannot be blank.""
25450 &New Folder
25451 New &label:
25452 [New Partition]:\
25453 New size is too large.
25454 New size is too small.
25455 No
25456 N&o
25457 &No
25458 &None
25459 None
25460 NOTE: The image file cannot be saved to a drive included in the image
25461 No Destination Available
25462 No schedule has been associated with this task.
25463 OK
25465 Only C: and have removable media
25466 Only C: and no removable media
25467 Open
25468 &Open
25469 Operations
25470 Operations Pending
25471 Operation 0 of 0
25472 Options
25473 Options
25474 This operation will require about %d CD's.
25475 OtherOps
25476 OutsideOps
25477 Overview
25478 Overview
25479 PartitionMagic LT
25480 Partitions Contained in Image File:
25481 The partition will be deleted before the disk image is restored.\n\nWARNING: Deleting a partition will DESTROY any existing data on that partition.
25482 Partition Operations
25483 P&assword:
25484 Password
25485 &Password:
25486 &Password-protect image file
25487 'Password' and 'Confirm password' do not match.
25488 Password entered is not valid for this image. (Passwords are case-sensitive)
25489 Invalid Password
25490 'Password', must be at least %d characters long.
25491 Password Protected:
25492 Perform operations now
25493 Perform the operations now?
25494 Please close Computer Management before running %s.
25495 Please close Disk Administrator before running %s.
25496 Please select backup location:
25497 Please select the type of system you would like to simulate:
25498 Please uninstall %s and reinstall it on the current Operating System.
25499 &Power down computer when finished.
25500 PowerQuest DriveMagic Copyright ⌐ 2002
25501 Preparing your machine to reboot and run %s.
25502 Progress1
25503 Pro&mpt before running %s.
25504 Properties
25505 &Properties
25506 Because destination is inside an extended partition, resulting drive(s) will be converted to logical drives. Proceed?
25507 Because destination is inside an extended partition, selected drive(s) will be restored as logical drives. Proceed?
25508 Read only
25509 Recommended size
25510 &Redistribute Free Space
25511 Reinsert first media of the image set into drive %s.
25512 Removable &media
25513 &Remove file from the list Del
25514 &Rename
25515 Reschedule -
25516 &Reschedule
25517 Could not resize extended partition on disk %d.
25518 &Resize destination drives to fill the entire unallocated area
25519 Resize Drives
25520 Resize Drive Wizard
25521 No
25522 &Resize restored drives to fill the entire unallocated area
25523 Yes
25524 Resizing or moving an operating system partition\nbeyond the 1024 cylinder boundary may make the\ncomputer unbootable. Due to INT13 BIOS limitations\non some machines, your rescue diskettes may not be\nable to recover from this situation.
25525 &Restart computer when finished.
25526 Hi&de drives after restore
25527 Restore Destination
25528 Restore all drives as logical drives
25529 Restore all drives as primary drives
25530 Click here to go to 'Select D&estination' screen.
25531 Click here to go to 'Select &Image File' screen.
25532 Restore Image
25533 &Restore Image
25534 Original locations.
25535 Restore Source
25536 Below is a description of the changes that will occur.
25537 &Restore to original locations
25538 You must select the destination for your image before you can finish.
25539 You must select the image file and drives you are restoring before you can finish.
25540 RTC file %s is corrupt.
25541 &Save
25542 Save As
25543 Save as &type:
25544 Sa&ve in:
25545 Scaling
25546 &Scaling...
25547 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16Selected drives:\tab\b %s\par\b0\par Image file location:\tab\b %s\par\b0\par Image file comments: \b %s\par\b0}
25548 Schedule
25549 &Schedule...
25550 Scheduled Task
25551 &Search
25552 Security
25553 See 'Creating Bootable Partitions' in the user guide for more\ninformation on operating system limitations. Moving all or\npart of an operating system partition above the specified\n'Boot Code Boundary' is not recommend.
25554 Select Destination
25555 &Select the disk to redistribute free space on:
25556 Select Drives
25557 Select drives to include in the image file:
25558 Select &drives to restore from the selected image file:
25559 &Select image file to restore:
25560 Select &location for the image file:
25561 Select partitions you normally plan to back up:
25562 Select partition to use as your backup &location:
25563 &Select removable media to create the backup image to:
25564 Select source drives to copy:
25565 Select System Setup
25566 &Select the disk where the new partition will be created:
25567 Select the drive to resize:
25568 Select the physical disk containing the drive to be deleted:
25569 Select the physical disk containing the drive to be resized:
25570 Select unallocated space or drive to restore to.
25571 Select unallocated space or drive to copy to.
25572 &Settings
25573 Setup Wizard
25574 %s copies operating system, application, and data files from your computer into an image file, which is stored in the backup location.
25575 This wizard will help you select or create the backup location. To continue, click Next.
25576 This wizard will guide you through the process of selecting or creating a backup location.
25577 &Size:
25578 Size:
25579 CD/R,650 MB
25580 CD/RW,650 MB
25581 Jaz1GB,995 MB
25582 Jaz2GB,1990 MB
25583 Zip100,93 MB
25584 Zip250,236 MB
25585 Si&ze of each file:
25586 &Size (Recommended):
25587 Skip &bad sector checks
25588 Source Options
25589 Spanned:
25590 Specify new partition properties
25591 Split image into &multiple files
25592 State of disk after drive resized
25593 Static
25594 &Support Website
25595 System
25596 %s cannot run on Windows NT/2000/XP Server.
25597 %s can only run on Windows NT Workstation 4.0, Windows 2000 and Windows XP.
25598 '%s' could not be found in the same location it was when the image was created.
25599 '%s' does not exist.
25600 '%s' has been scheduled and will appear in the Windows Scheduled Tasks folder.
25601 '%s' is an invalid filename.\n\nA filename cannot contain any of the following characters:\n\ / : * ? < > |
25602 '%s' is an invalid label.\n\nA label cannot contain any of the following characters:\n* ? [ ] : < > | + = ; \ / " .
25603 %s KB
25604 %s will now create a backup image to the location you selected.
25605 A task with the name '%s', already exists in the Windows Scheduled Tasks folder.
25606 Task &name:
25607 &Technical Support
25608 text
25609 Active
25610 Browse
25611 Browse for default image folder
25612 Cannot modify destination of the restored drives
25613 Click 'Select Destination' to choose where to copy drives
25614 Click 'Select Drives' to choose drives to copy
25615 Use PartitionMagic style color coding for drives display
25616 Click 'Select Destination' to choose where to store image
25617 Click 'Select Drives' to choose drives to image
25618 PQIs
25619 Delete
25620 Delete &all
25621 Description
25622 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fprq2\fcharset0 MS Sans Serif;}{\f1\fswiss\fcharset0 MS Sans Serif;}}{\colortbl ;\red255\green0\blue0;}\viewkind4\uc1\pard\f0\fs16\b Click \cf1 'Finish'\cf0 , if you would like to create the image without scheduling it\b0\f1\par}
25623 drive is being copied
25624 One or more of the volume drive letters are now inaccessible\nuntil Windows restarts.
25625 - Free
25626 - Used
25627 Drive view
25628 Click 'Select Drive' to choose drive to copy
25629 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16You can choose new settings from the menu on the left.\par\par Click \b 'Finish'\b0 button from any window to create image using current settings.\par}
25630 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16You can choose new settings from the menu on the left.\par\par Click \b 'Finish'\b0 from any window to copy drives using current settings.\par}
25631 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16 Do you want to continue and perform the restore operation?\par}
25632 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\b\f0\fs16 The operation you selected requires your computer to reboot.\b0\par\parDo you want to continue and perform the restore operation?\par}
25633 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}\viewkind4\uc1\pard\f0\fs16You can choose new settings from the menu on the left.\par\par Click \b 'Finish'\b0 from any window to restore an image using current settings.\par}
25634 Hide/Unhide
25635 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 MS Sans Serif;}}{\colortbl ;\red255\green0\blue0;}\viewkind4\uc1\pard\f0\fs16\cf1IMPORTANT:\cf0 You have chosen to restore drives to original locations. The drives selected from the image file will overwrite the corresponding drives on your system. Any changes you made to the drives since creating this image will be lost!\par}
25636 insufficient space to use as destination
25637 Label
25638 Local Disk
25639 Logical
25640 Number
25641 &Operations
25642 Deselect 'Restore to original locations' if you would like to choose alternative destinations
25643 Primary
25644 Click on 'Select Image File' to choose the image to restore
25645 Click on 'Select Image File' to choose drives to restore
25646 Click 'Select Destination' to choose where to restore to
25647 drive is being imaged
25648 Select Image File Name
25649 Click 'Select Destination' to choose copy destination
25650 Click on 'Select Destination' to choose where to restore to
25651 Set &active
25652 Show color &legend
25653 No
25654 Unallocated space on disk %d
25655 View drive
25656 There is either insufficient room on available drives, or all drives are included in the image.
25657 The computer needs to reboot so that all your drive letters will be accessible.
25658 The current disk configuration of this machine is\nnot compatible with the disk configuration that was saved.
25659 The directory %s does not exist.\nWould you like to create it?
25660 The following operations are pending:
25661 The image file '%s' was created with an older version of %s.\n'Restore to original locations' cannot be selected.
25662 The image file will be created with the following options:
25663 The label entered was too long.
25664 The program will now reboot your system.
25665 The tutorial will explain the basic concepts of creating and restoring images, and will explain the terms related to these operations. It is intended for novice computer users.
25666 This image is password protected.
25667 This is the demo version of %s.\n\nTo purchase the full version please visit your local software retailer or visit us on the Web at www.powerquest.com.
25668 This is very helpful help screen.
25669 This operation will require about %d - %d CD's.
25670 This version of %s is built for Windows 95/98/Me and cannot run in Windows NT/2000/XP.
25671 This version of %s is built for Windows NT/2000/XP and cannot run in Windows 95/98/Me.
25672 &Tiles
25673 Time Elapsed:
25674 The time has expired on this evaluation version.
25675 Confirm File Delete
25676 Confirm Folder Delete
25677 Overwrite Existing File?
25678 Reboot required
25679 Toggle Image Ops
25680 Total Image Size:
25681 Total MB Copied:
25682 Total Progress
25683 Total used space selected:
25684 To calculate partition size, select drives to image:
25685 Transfer rate:
25686 Trial Version
25687 operations pending
25688 operation pending
25689 Type:
25690 Type of file:
25691 Unable to continue.
25692 Unable to create the directory %s.
25693 Unable to read '%s'.
25694 Unable to restore to original locations.
25695 Unable to save the file.
25696 Unable to write '%s'.
25697 Entire disk is unallocated space.
25698 &Undo last
25699 &Undo Delete
25700 &Unhide
25701 Unknown
25702 Unknown File Type
25703 &Verify
25704 Verifying image file:
25705 Verify disk &writes
25706 Ve&rify image contents
25707 Verify Image File
25708 &Label:
25709 &Wait until shutdown to run %s.
25710 Are you sure you want to delete the selected partition?
25711 Warning
25712 Click on 'Calculate Partition Size' to help you determine the size of the new partition.
25713 This partition crosses the 1024 cylinder boundary and may not be bootable.
25714 There are no existing partitions available to backup to. Either select a different backup location or de-select drives to backup.
25715 You still need to select the drives from the image file to restore
25716 You still need to select the image file you want to restore
25717 If Windows NT is installed on this disk, please note the following. At least part of an existing partition will move above 4GB. On IDE and some SCSI disks, Windows NT will not boot if it is installed on partitions above 4GB. If Windows NT is installed on a partition that is moving beyond 4GB, you may want to cancel this operation.
25718 The partition size must be between %d MB and %d MB.
25719 We recommend closing all other applications while running %s.
25720 We recommend that you make a backup image of your selected partitions before the disk is modified to create the new partition.
25721 Would you like to create a backup image to removable media?
25722 Click %s to accept this change to your disk.
25723 Would you like to create a backup image now?
25724 Images\MyBackup.pqi
25725 Please enter a filename with a .pqi extension.
25726 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Arial;}}\n{\colortbl ;\red36\green62\blue130;}\n\viewkind4\uc1\pard\cf1\b\f0\fs20 Select partitions to back up\cf0\b0\par\n}
25735 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Microsoft Sans Serif;}}\viewkind4\uc1\pard\b\f0\fs24 View tutorial\b0\fs20\par}
25736 We recommend that you make a backup image of your selected partition(s) before the disk is modified.
25737 We recommend that you make a backup image of your hard disk before the disk is modified.
25738 Existing partition %s
25739 Removable media (%s)
25740 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Microsoft Sans Serif;}}\n\viewkind4\uc1\pard\f0\fs16 1. Partition(s) to backup: %s\par\n\par\n2. Backup location:\tab %s\par\n\par\n}
25741 {\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Microsoft Sans Serif;}}\n\viewkind4\uc1\pard\f0\fs16 Partition(s) to backup: %s\par\n\par\nBackup location: %s\par\n\par\nImage filename: %s\par\n\par
25742 Create a new partition on disk %d\par\n\tab\tab Label:\tab\tab %s\par\n\tab\tab Size:\tab\tab %s\par\n\tab\tab File system:\tab %s\par\n\tab\tab Hide partition:\tab %s
25743 3. Create the backup image %s\par\n\par\n}
25744 Create a backup image on %s of partition(s) %s\par\n (Note: This will require approximately %d media.)\par\n\par\n}
25745 Create a backup image on %s of partition(s) %s\par\n (Note: This will require approximately %d media.)\par\n\par
25746 Next
25747 Yes
25748 &Yes
25749 &Yes (Recommended)
25750 You cannot save the image file, '%s', to a CD drive that is not recordable.
25751 You cannot save the image file, '%s', to a partition that is being saved.
25752 You have %d partitioning operations pending. Only Create Image operations can be scheduled.\n\nClick Finish to apply the pending operations now.
25753 You must have Administrator rights to run %s for Windows NT/2000/XP.
25754 You must select an existing drive to back up to.
25755 You must select a media to back up to.
25756 You must shut down other PowerQuest products before running %s.
25757 You must specify a drive for the destination image file.
25758 Create New Folder
25759 Go To Last Folder Visited
25760 Up One Level
25761 HH:MM
25762 Other Options
25763 Version %s build %s
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
