1102 Warning: This will format the Memory card inserted in the camera.\nFormatting erases all existing data on the Memory card.\nClick [OK] to start formatting the Memory card or press [Cancel] to exit.
1103 Warning: This will format the Memory card inserted in camera slot %s.\nFormatting erases all existing data on the Memory card.\nClick [OK] to start formatting the Memory card in camera slot %s or press [Cancel] to exit.
1104 AM
1105 PM
1106 Error
1107 Error setting time
1108 The entered date is invalid.
1109 255
1110 Camera Settings
1111 Camera date settings exceeds the valid range (up to the year 2030),\nDate and time will be set to PC settings.
1112 The system time of your PC is out of supported year,\nthe system time can not be set.
1114 Installed
1115 Not Installed
1200 File Settings
1300 Detailed Settings
2000 Exposure Functions 1
2200 Exposure Functions 2
2300 AF Functions 1
2400 AF Functions 2
2500 Drive Functions
2600 ??????
2700 Other Functions 1
2800 Other Functions 2
2900 Combination
2901 C.Fn-%02d-%d
2902 :
2903 Saved in file: %s\n
2904 Current settings: Applied to camera.\n\n
2905 Current settings: Not applied to camera.\n\n
3000 The parameter set is not on the camera.\nClick the [Add Set] button to add a set\nthen specify the parameters.
3001 User-defined tone curve not registered.
3002 Warning
3003 Low
3004 Low
3005 Normal
3006 High
3007 High
3008 Set Deletion Confirmation
3009 This will delete from camera %s.\nOK to proceed?
3010 Error
3011 Error setting parameter sets
3012 Confirmation
3013 A parameter set has not been set on the camera.\nDo you still wish to exit parameter setting?
3014 Warning
3015 The settings to be deleted are set in the personal function.\nDeleting will reset these to the default settings. Do you still wish to delete?
3100 Set1
3101 TCD1
3102 TCD2
3103 TCD3
3200 Set2
3300 Set3
4000 Exposure Functions 1
4001 Program AE
4002 Shutter-Priority AE
4003 Aperture-Priority AE
4004 Depth-of-field AE
4005 Bulb Exposure Mode
4006 Manual Exposure
4007 Evaluative Metering
4008 Partial Metering
4009 Spot Metering
4010 Center-Weighted Average Metering
4011 Cannot use %s
4100 Exposure Functions 2
4101 Error
4102 PFn.5 maximum and minimum values are invalid.\nRestored previous settings.
4200 Exposure Functions 3
4300 AF Functions
4400 Drive Functions
4401 Camera settings dialog
4402 Value is out of range.\nPlease set a value between 2 and 21.
4403 Value is out of range.\nPlease set a value between 2 and 10.
4500 Other Functions 1
4501 Error
4502 Cannot change PFn.25 white balance settings to %s
4503 Error
4504 Cannot change P.Fn.25 parameter settings to %s.
4505 Camera settings dialog
4506 Value is out of range.\nPlease set a value between 0 and 3600.
4550 Other Functions 2
4600 Other Functions 3
4900 Combination
4901 P.Fn-%02d-%d
4902
4903 ,
4904 and
4905
4906
4907
4908
5000 PC1
5001 PC2
5002 PC3
5003 %s: Already set (%s)
5004 %s: Not set
5005 Error
5006 Error reading WBD file.
6000 Error
6001 Error reading TCD data.
7000 ?????????????????
7001 ?????????????????
8000 Format complete.
8001 Finished formatting Memory card.
8002 Formatting failed
8006 Unable to format Memory card.
10000 This dialog can be used to set the parameter settings for the camera's creative zone.\nParameter sets labeled Set1-Set3 can be applied to camera.
10001 Switches between parameter sets.
10002 Adjust the contrast.
10003 Adjusts the sharpness.
10004 Adjust the color saturation.
10005 Loads parameter set file to current set.
10006 Saves the selected parameter set to the computer.
10007 Uploads the current parameter set to the camera.
10008 Close the dialog.
10009 Add new parameter set to the camera.
10010 Delete current tab's set ( also from camera if applied ).
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
