15742 Canon 101.6 x 152.4 mm (SheetSize 120.0 x 216.0 mm)
15743 17 x 22 431.8 x 558.5 mm
15744 Custom...
15745 Env. #4 105.0 x 235.0 mm
15746 Env. #6 98.0 x 190.0 mm
15747 Comm. Env. #10 104.6 x 241.3 mm
15748 DL Env. 110.0 x 220.0 mm
15751 Letter
15752 Letter L
15753 17 x 11
15755 Legal
15756 Legal L
15757 A2
15758 A3
15759 A3 L
15760 A4
15761 A4 L
15762 A5
15763 A5 L
15764 B3
15765 B4
15766 B4 L
15767 B5
15768 B5 L
15769 11 x 17
15771 Fanfold 10 x 11
15772 Fanfold 15 x 11
15773 Fanfold 10 x 12
15774 Fanfold 15 x 12
15775 US Fanfold
15776 Postcard
15777 Postcard L
15778 Env. #4
15779 Env. #6
15780 Comm. Env. #10
15781 DL Env.
15782 13.5 x 17
15783 17 x 13.5
15784 Fanfold 8.5 x 11
15785 Fanfold 8.5 x 12
15786 Fanfold 9.5 x 11
15787 Fanfold 12 x 8.5
15788 Fanfold 14.5 x 11
15789 Letter+
15790 A4+
15791 A3+
15792 Canon 101.6 x 152.4 mm
15793 17 x 22
15794 L size
15795 2L size
15796 4 x 6
15801 High
15802 Standard
15803 Draft
15804 Custom
15805 Super Economy
15806 High Speed
15901 ON
15902 OFF
15903 On
15904 Off
15951 BJ Status Monitor is missing.\nReinstall the BJ Printer Driver and try again.
15952 Cannot start Port Monitor.
15953 Selected printer cannot be used.\nRestart your computer to use this printer.
15954 Selected printer cannot be used.\nReinstall the latest BJ Printer Driver and try again.
16001 Start detecting the type of BJ Cartridge installed in your printer?
16002 %s BJ Cartridge detected.\nThis matches your current BJ Cartridge setting.
16003 %s BJ Cartridge detected.\nDo you want your driver setting match to the cartridge type?
16004 Scanner Cartridge detected.\nYou cannot print with this cartridge.
16005 BJ Cartridge cannot be detected while the print queue is paused.
16006 The current BJ Cartridge cannot be used.\nInstall another BJ Cartridge in your printer.
16007 Could not detect BJ Cartridge.\nMake sure the printer is properly connected and powered on, then try again.\nIf it still cannot be detected, see the user's manual.
16008 Cartridge Detection
16011 Media Type: %s cannot be used with the selected BJ Cartridge.\nSelect the type of media you intend to use.
16012 Borderless printing cannot be done when Media Type: %s is selected.\nSelect the type of media you intend to use.
16021 Do you want to change the Paper Source setting to %s, which is optimum for the selected Media Type.
16024 Paper Source: %s is not available for the selected Media Type.\nPaper Source setting has been changed to %s.
16025 Manual feeding is not possible when the paper length is less than A5 (210 mm/8.3 in).\nSelect Auto Sheet Feeder in the case.
16031 Colour Printing
16032 Mono Printing
16041 in (%s-%s)
16042 mm (%s-%s)
16043 %s mm
16044 %s in
16051 Super Ec&onomy
16052 &High Speed
16061 Print Advisor will help you achieve appropriate print settings.
16201 The selected paper size is not supported by your printer.\nFit-to-Page Printing will be selected as Printing Type.
16202 Page Size has been changed.
16204 The selected Page Size cannot be used in Banner Printing mode.
16206 Cannot do banner printing at the current page size.
16212 You have selected Banner Printing.\nFor best results, click Help for banner printing instructions.
16213 OK
16214 &Help
16215 You have selected Borderless Printing.\nThe document to be printed is enlarged so that it slightly extends off the paper.\nPrint quality may deteriorate or the sheet may be stained at the top and bottom depending on the type of the media used.
16232 %d-Page Print
16241 Set the paper size as follows:\nWidth from %s to %s mm (%s to %s in)\nHeight from %s to %s mm (%s to %s in)
16251 (Scaled Print)
16252 Same as Page Size
16253 Auto
16261 Custom... %d%c%01d x %d%c%01d mm
16262 Custom... %d%c%02d x %d%c%02d in
16263 %s %d%c%01d x %d%c%01d mm
16264 %s %d%c%02d x %d%c%02d in
16271 &Print all pages
16272 &Delete all pages
16273 &Help
16300 Actual-size
16301 ->
16302 Scaling:
16303 %d%%
16304 Auto
16310 This is not a valid print range.\nEnter page numbers and/or page ranges\nseparated by commas. For example, 1,3,5-12
16311 No pages are selected for printing.\nClick the Preview screen and select the pages for printing.
16320 The booklet stapling margin range is from %s to %s inches.
16321 The booklet stapling margin range is from %s to %s mm.
16351 The right end is recommended. The amount of extension is least at the left end.
16401 Effects:
16402 Ph&oto Optimizer PRO
16500 Stamp:
16501 Background:
16502 Stamp
16503 Place stamp over text
16504 Stamp first page only
16505 Background
16506 Background first page only
16507 None
16510 Open Stamp setting dialogue and save as new Stamp.
16511 Open Background setting dialogue and save as new Background.
16601 Current Settings
16602 Default Settings
16603 Parameter
16604 Setting
16607 Current Settings displayed. Click Add to Profiles... to add these print settings to Printing Profiles.
16608 Default Settings displayed. Click Retrieve from Profiles to retrieve this Printing Profile.
16611 This entry cannot be restored once deleted.\nDo you want to delete entry '%s'?
16612 The current driver settings will be changed to the settings associated with entry '%s'.\nDo you want to change the settings?
16613 You cannot save more than 30 entries. Delete an existing entry before adding a new one.
16614 Entry '%s' could not be retrieved.
16615 Entry '%s' could not be added.
16616 Entry '%s' could not be deleted.
16617 Entry '%s' already exists.\nDo you want to overwrite it?
16618 Enter a string for Name.
16619 '%s' has been added to Printing Profiles.
16621 BJ Cartridge
16622 Media Type
16623 Paper Source
16624 Print Quality
16625 Halftoning
16626 Greyscale Printing
16627 Colour Adjustment
16628 Matching
16629 Brightness
16630 Print Type
16631 Enable ICM
16632 Orientation
16635 Page Size
16636 Printer Paper Size
16638 Page Border
16639 Copies
16640 Collate
16641 Reverse Order
16642 Image Optimizer
16643 Photo Optimizer
16644 Apply Throughout Page
16645 Photo Optimizer PRO
16646 Duplex Printing
16647 Staple Side
16648 Long-side stapling
16649 Short-side stapling
16651 Scaling
16652 Quality
16653 Vivid Photo
16661 Diffusion
16662 Dither
16663 Auto
16664 Cyan
16665 Magenta
16666 Yellow
16667 Black
16668 Intensity
16671 Auto
16672 Manual
16781 Portrait
16782 Landscape
16783 Simulate Illustration
16784 Monochrome Effects
16785 Sepia
16786 Blue
16787 Pink
16788 Green
16789 Select Colour (%d)
16790 Entry '%s' is reserved by driver.
16791 Auto Tone Control
16801 Cleaning
16802 Deep Cleaning
16803 Cleaning by Tank
16804 Roller Cleaning
16805 Nozzle Check
16806 Demo Sheet
16807 Change BJ Cartridge
16808 Change Ink Tank
16809 Power Off
16810 Auto Power
16811 Print Head Alignment
16812 Custom Settings
16813 Thick Paper Adjustment
16814 Ink Counter Reset
16815 Low Ink Warning Setting
16816 Quiet Mode
16817 Bottom Plate Cleaning (temp)
16821 Executes print head cleaning.
16822 Executes print head deep cleaning.
16823 Cleans the print head after ink tank has been changed.
16824 Executes print roller cleaning.
16825 Prints a nozzle check pattern.
16826 Prints printer demonstration sheet.
16827 Lets you replace BJ Cartridge.
16828 Lets you replace ink tank.
16829 Turns printer off.
16830 Opens auto power dialogue box.
16831 Executes print head alignment.
16832 Executes custom setting.
16833 Move the print head to the centre of the printer to adjust paper thickness.
16834 Reset ink counter whenever you have replaced any ink tank with new one.
16835 Opens the Low Ink Warning Setting dialogue box.
16836 Opens the Quiet Mode dialogue box.
16837 Executes Bottom Plate Cleaning. (temp)
16840 Starts BJ Status Monitor.
16841 P&hoto BJ Cartridge Detection
16842 Se&t Printer to ECP mode
16843 Pause &Page
16844 Pause &Scan
16845 &Automatically align heads after replacing BJ Cartridge
16846 Align heads &manually
16847 &Cleaning after Cartridge Replacement
16848 &Economy Cleaning
16849 &Ink Out Detection
16850 P&revent inter-sheet ink transfer
16851 Select Quality for maintenance
16852 Re&duce streaks in black sections when printing on plain paper
16861 Enable
16862 Disable
16863 1 minute
16864 %d minutes
16871 Change BJ Cartridge
16872 Change Ink Tank
16873 Thick Paper Adjustment
16891 Maintenance
16901 Do not start another operation until current one has finished.
16902 Write settings to printer?
16911 Do you want to clean the paper feed rollers?\nLoad the special cleaning sheet in the sheet feeder to do this.
16912 Cleaning paper feed rollers.\n\nYou will need the special Cleaning Plate and two sheets of plain paper.\nFirst wet the cleaning area of the Cleaning Plate. Wipe away any moisture in other areas on the front and back.\nPlace the Cleaning Plate in the Auto Feeder so that the cleaning area is toward you.\nDuring cleaning, the paper feed rollers will be activated 20 times. The process will take about a minute.\n\nDo you want to start roller cleaning?
16913 To remove any moisture left on the paper feed rollers,\nkeep the Cleaning Plate in place and insert the first sheet of plain paper into the Auto Feeder.
16914 With the Cleaning Plate still in place,\ninsert the second sheet of plain paper into the Auto Feeder to remove any remaining moisture.
16915 Feed roller cleaning is complete.\nRemove the Cleaning Plate.
16921 Start printing nozzle check pattern? Load some paper in the Auto Sheet Feeder to proceed with printing.
16922 Start demonstration print? Load some paper in the Auto Sheet Feeder to proceed with printing.
16923 Start printing nozzle check pattern? Load some paper in the printer to proceed with printing.
16924 Start demonstration print? Load some paper in the printer to proceed with printing.
16931 Change BJ Cartridge?
16932 You are attempting to replace the BJ Cartridge on a remote printer.\nTo complete the operation you need to have access to this printer.\nDo you want to continue?
16933 Change ink tank?
16934 You are attempting to replace the ink tank on a remote printer.\nTo complete the operation you need to have access to this printer.\nDo you want to continue?
16935 1. Wait for cartridge to centre itself.\n2. Release cartridge by raising cartridge lock lever on side.\n3. Replace cartridge and lock it by lowering cartridge lock lever.\n4. Press CARTRIDGE button (as indicated by arrow).\n5. Wait for POWER lamp to stop blinking.
16936 1. Wait for cartridge to move to replace position.\n2. Replace cartridge.\n3. Press REPLACE button (as indicated by arrow).\n4. Wait for POWER lamp to stop blinking.
16937 1. Wait for cartridge to move to replace position.\n2. Replace ink tank.\n3. Press REPLACE button (as indicated by arrow).\n4. Wait for POWER lamp to stop blinking.
16938 1. Wait for cartridge to centre itself\n2. Replace cartridge.\n3. Press CARTRIDGE button as shown.\n4. Wait for POWER lamp to stop blinking.
16939 1. Wait for cartridge to move to replace position.\n2. Release cartridge by lowering cartridge lock lever on side.\n3. Replace cartridge and lock it by raising cartridge lock lever.\n4. Press CARTRIDGE button (as indicated by arrow).\n5. Wait for ON LINE Indicator to stop blinking.
16941 Turn printer off?
16951 Did the pattern print successfully?\n\nIf nothing was printed, or if the pattern is noticeably faint or patchy, click No and try again.
16952 Make sure the printer power is on, the cable is connected properly, and the printer is online, then try again.
16953 Print head alignment is complete.\n\nTo verify the number entered, execute Nozzle Check on the Maintenance tab.
16954 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nFor optimum printing, carry out this operation after replacing a BJ Cartridge.\n\nSince alignment involves printing, make sure the printer is ready (cable connected and printer power on), and load a sheet of paper in the sheet feeder. Both standard and high resolution alignment will be done.\n\nStart print head alignment?
16955 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nFor optimum printing, carry out this operation after replacing a BJ Cartridge.\n\nSince alignment involves printing, make sure the printer is ready (cable connected and printer power on), and load a sheet of paper in the sheet feeder. Both standard and high-speed printing mode alignment will be done.\n\nStart print head alignment?
16956 This will align the print heads to correct any error in their installation position.\n\nReady the printer (connect the cable and turn the power on) and load one sheet of paper in the sheet feeder, since alignment entails printing. Standard-resolution and high-resolution alignment will be carried out.\n\nTo carry out automatic head alignment, click Cancel, uncheck Align heads manually in the Custom Settings dialogue box, and click Send.\n\nDo you want to carry out alignment?
16957 Do you want to carry out automatic head alignment?\n\nReady the printer (connect the cable and turn the power on) and load a sheet of paper normally in the sheet feeder, since alignment entails printing.\n\nTo carry out manual head alignment, click Cancel, check Align heads manually in the Custom Settings dialogue box, and click Send.
16958 Aligning for high resolution consecutively.\n\nLoad a new sheet of paper or reuse the same one, and click OK.\nThe high resolution pattern will be printed.
16959 Aligning for high speed consecutively.\n\nLoad a new sheet of paper or reuse the same one, and click OK.\nThe high-speed pattern will be printed.
16960 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nAlignment entails printing, so do the following.\nReady the printer (connect the cable and turn the power on), move the printer's paper thickness lever up, and load a sheet of high resolution paper in the sheet feeder.\n\nDo you want to make any adjustment?
16961 Print head alignment is now complete.
16962 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nFor optimum printing, carry out this operation after replacing a BJ Cartridge.\n\nSince alignment involves printing, make sure the printer is ready (cable connected and printer power on), and load a sheet of paper.\n\nStart print head alignment?
16963 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nAlignment entails printing, so do the following.\nReady the printer (connect the cable and turn the power on), move the printer's paper thickness lever up, and load a sheet of plain paper in the sheet feeder.\n\nDo you want to make any adjustment?
16964 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nSince alignment involves printing, make sure the printer is ready (cable connected and printer power on), move the printer's paper thickness lever left, and load a sheet of paper in the sheet feeder. Head alignment patterns will be printed.\n\nStart print head alignment?
16965 Additional head alignment patterns will be printed.\n\nLoad another sheet of paper and click OK.
16966 Print head alignment is complete.\nTo finish the alignment, click Cancel.\n\nIf streaks appear on the printing side, you can prevent them from appearing by aligning the print head.\nTo proceed to this alignment, insert a sheet of paper into the sheet feeder and click OK.
16967 Starting Print Head Alignment to compensate for print head installation positioning error.\n\nAlignment entails printing, so do the following.\nReady the printer (connect the cable and turn the power on), move the printer's paper thickness lever left, and load a sheet of plain paper in the sheet feeder.\n\nDo you want to make any adjustment?
16971 Adjust printer for paper thickness?
16972 Open the printer cover. The print head should now be positioned in the centre of the printer.\nAdjust the paper thickness lever located just above the print head. When printing with thick paper, move the lever to the left. See upper graphic at left.\nWhen printing with normal or thin paper, move the lever to the right. See lower graphic at left.\nClick OK button when done to move the print head back to it's original position.
16981 You cannot reset the ink counter because the printer is set not to display a low ink warning.\n\nTo enable display of a low ink warning, click the Low Ink Warning Setting button on the Maintenance tab. Read your printer manual before carrying out this operation.
16991 Do you want to execute Bottom Plate Cleaning?\n\nLoad the special cleaning sheet in the sheet feeder to do this. (temp)
17000 Welcome to Print Advisor. Print Advisor\nwill help you select appropriate driver settings.\nSelecting the correct BJ Cartridge and Media Type is very\nimportant. What kind of printing do you want to do?
17001 Welcome to Print Advisor. Print Advisor\nwill help you select appropriate driver settings.\nSelecting the correct Media Type is very important.\nWhat kind of printing do you want to do?
17002 Print a top-quality photo
17003 Print tables and charts
17004 Print a composite document
17005 Fast-print all-black text
17011 You should use the following media to\n%s.
17021 You should use the following BJ Cartridge to\n%1\non %2.
17031 You have selected the following Media Type and\nBJ Cartridge. Print Advisor will apply appropriate\nsettings to achieve the kind of printing you want.
17032 Important: To get the correct printout, the selected media\nand BJ Cartridge must actually be loaded in your printer.\n\nPlease make sure of this before you start printing.
17033 You have selected the following Media Type.\nPrint Advisor will apply appropriate settings to\nachieve the kind of printing you want.
17034 Important: To get the correct printout, the selected media\nmust actually be loaded in your printer.\n\nPlease make sure of this before you start printing.
17041 Colour (BC-05)
17042 Black (BC-02)
17043 Photo (BC-06)
17044 Colour (BC-21e)
17045 Black (BC-20)
17046 Photo (BC-22e)
17047 Black/Colour (BC-60/BC-61)
17048 Black/Photo (BC-60/BC-62)
17049 Black/Colour (BC-60/BC-61)
17050 Black/Photo (BC-60/BC-62e)
17051 Black/Colour (BC-80/BC-81)
17052 Photo/Colour (BC-82/BC-81)
17053 Black/Colour (BC-30/BC-31)
17054 Photo/Colour (BC-32/BC-31)
17055 Colour (BC-11e)
17056 Black (BC-10)
17057 Photo (BC-12e)
17058 Photo (BC-50)
17059 Black (BC-30)
17060 Colour (BC-33)
17061 Photo (BC-34)
17062 Black (BC-30e)
17063 Colour (BC-33e)
17064 Photo (BC-34e)
17065 Black/Colour (BC-30e/BC-31e)
17066 Photo/Colour (BC-32e/BC-31e)
17201 The selected Quality setting increases the volume of print data and so increases the printing time.\nSelecting this setting is recommended only if setting %s will not give the desired image quality.\nDepending on the image data, the selected setting may improve the image quality.\n\nClick Yes to print with the selected Quality setting or No to print with setting %s.
17401 None
17402 Auto
17403 Photo
17404 Graphic
17501 Stamp Settings: [%s]
17502 Regular
17503 Bold
17504 Italic
17505 Bold Italic
17507 Square
17508 Circle
17509 Round border
17510 Centre
17511 Top Left
17512 Top Right
17513 Bottom Left
17514 Bottom Right
17515 Custom
17521 &Save
17522 &Save overwrite
17531 Some of the settings for stamp '%s' have been changed.\nSaving will overwrite the original settings.\nDo you still want to save?
17532 Stamp '%s' has not been saved. Do you want to save it?
17533 A stamp named '%s' already exists.\nSaving will overwrite it.\nDo you still want to save?
17534 Do you want to save the stamp defined by the current settings?
17535 This will delete the stamp permanently.\nDo you still want to delete stamp '%s'?
17536 Stamp '%s' could not be saved.
17537 Stamp '%s' could not be deleted.
17538 Stamp '%s' were deleted.\nThe Stamp setting will be set to OFF.
17539 The limit of 100 saved stamps has been reached.\nDelete one of the stamps to make room for the new one.
17540 Size setting range is 1 to 255.
17541 X- and Y-Position setting range is -100 to 100.
17542 Orientation setting range is -180 to 180.
17543 If you delete Stamp, you will not be able to set Stamp until new settings are saved.\nDo you want to delete it?
17544 The stamp '%s' image file is not BMP format. Click the Define Stamp button and check the image file selection.
17545 The stamp '%s' image file cannot be found. Click the Define Stamp button and check the image file selection.
17546 Correct font not selected.
17547 Cannot save a title that contains only spaces.
17548 Spaces before and after titles will be deleted.
17549 The stamp '%s' image file not found.\nThe Stamp setting will be set to OFF and printing will be continued.
17550 The stamp '%s' image file is not BMP format.\nThe Stamp setting will be set to OFF and printing will be continued.
17566 Internal Use Only;000,000,255;0;Arial;72;FALSE;FALSE;0;45
17567 ;
17568 ;
17569 ;
17570 ;
17571 ;
17572 ;
17573 ;
17574 ;
17575 ;
17576 ;
17577 ;
17578 ;
17579 ;
17580 ;
17581 6
17582 Arial
17583 RECYCLEMARK
17601 Version
17602 File
17603 Microsoft Windows XP and Windows 2000\nCanon BJ Printer Driver\nVersion %sGB\nCopyright CANON INC. 2000-2001\nAll Rights Reserved.
17604 Microsoft Windows 2000\nCanon BJ Printer Driver\nVersion %sGB\nCopyright CANON INC. 2000-2001\nCopyright Canon Business Machines, Inc. 2001\nAll Rights Reserved.
17605 Microsoft Windows NT 4.0\nCanon BJ Printer Driver\nVersion %sGB\nCopyright CANON INC. 1999-2001\nAll Rights Reserved.
17606 Microsoft Windows NT 4.0\nCanon BJ Printer Driver\nVersion %sGB\nCopyright CANON INC. 1999-2001\nCopyright Canon Business Machines, Inc. 2001\nAll Rights Reserved.
17607 Microsoft Windows 2000\nCanon MP Printer Driver\nVersion %sGB\nCopyright CANON INC. 2000-2001\nAll Rights Reserved.
17608 Microsoft Windows NT 4.0\nCanon MP Printer Driver\nVersion %sGB\nCopyright CANON INC. 2000-2001\nAll Rights Reserved.
17701 Background Settings: [%s]
17702 Not Saved
17705 Fill page
17706 Fit to paper size
17707 Fit to paper size (scaling)
17708 Centre
17709 Top Left
17710 Top Right
17711 Bottom Left
17712 Bottom Right
17713 Custom
17714 Bitmap Files (*.bmp)
17720 The selected image file '%s' does not exist. Please check the file name.
17721 The selected image file '%s' is not a BMP file. Please select a BMP file.
17722 This background '%s' has some modified settings.\nIf it is saved, the old background cannot be restored.\nDo you want to save this background?
17723 This background '%s' has not been saved.\nDo you want to save it?
17725 The background '%s' has already been saved.\nIf this background is saved, the old one cannot be restored.\nDo you want to replace the old background with this background?
17726 Do you want to save this background with the current settings?
17727 Once a background is deleted, it cannot be restored.\nDo you want to delete this background '%s'?
17728 Background '%s' could not be saved.
17729 Background '%s' could not be deleted.
17730 Background '%s' were deleted.\nThe Background setting will be set to OFF.
17731 The limit of 100 saved backgrounds has been reached.\nDelete one of the backgrounds to make room for the new one.
17733 X- and Y-Position setting range is -100 to 100.
17734 If you delete Background, you will not be able to set Background until new settings are saved.\nDo you want to delete it?
17735 Image files larger than 15MB cannot be used.\nPlease select another image file.
17736 The background '%s' image file is not BMP format. Click the Select Background button and check the image file selection.
17737 The background '%s' image file cannot be found. Click the Select Background button and check the image file selection.
17738 The background '%s' image file not found.\nThe Background setting will be set to OFF and printing will be continued.
17739 The background '%s' image file is not BMP format.\nThe Background setting will be set to OFF and printing will be continued.
17740 &Save
17741 &Save overwrite
17750 Sample 1
17751 Sample 2
17810 This printer requires print head alignment.\nClick Print Head Alignment on the Maintenance tab to start alignment.
