home *** CD-ROM | disk | FTP | other *** search
- CYBERIA
-
- Requirements:
- =============
-
- CYBERIA requires a 386/16 or better with at least 4 MB of RAM and about
- 1.5 MB of free hard disk space. A Joystick and Sound Card are highly
- recommended!
-
-
- Installation:
- =============
-
- To install CYBERIA, place the Demo CD in your drive and type:
-
- D: <ENTER>
-
- INSTALL C: <ENTER>
-
- The installation will create the directory -C:\CYBERIA- on your hard drive
- and copy over the necessary program files. After installation, you have
- several options:
-
-
- Calibrate Joystick:
- ===================
-
- Type CALJOY to run the joystick calibration program.
-
-
- Playable Demo:
- ==============
-
- Type CYBERIA to play the demo version of CYBERIA.
-
-
-
- Self-Running Demo:
- ==================
-
- Type DEMO to view the self running demo of CYBERIA.
-
- Note:
- Some machines may have problems with the Transfighter firing
- mechanism during the self running demo. This problem is due to a slight
- difference in some manufacturers CPU chipsets, and is NOT related to your
- machine's configuration. If you encounter such problems, switch to the
- playable version of the Cyberia demo by typing CYBERIA at the DOS prompt.
-
-
- Memory Requirements:
- ====================
-
- CYBERIA requires a 386/16 or better with at least 4 MB of ram. For best
- performance you should disable any memory managers which may be present
- on your system. Examples of memory managers are EMM386 and QEMM. If you
- have problems running CYBERIA, or receive a message stating "Not Enough
- Memory," check your CONFIG.SYS file and remove any memory managers. Make
- sure to reboot your computer afterwards so the changes will go into effect.
-
-
- Sound Problems:
- ===============
-
- This DEMO version of CYBERIA will only play sound on SOUND BLASTER compatible
- sound cards.
-
- If the sound does not work, check the BLASTER environment setting
- in your AUTOEXEC.BAT file. The line should look something like this:
-
- set BLASTER=A220 I5 D1
- / / /
- I/O port_/ / /
- / \
- IRQ#_/ DMA channel
-
- The Demo version of CYBERIA supports all IRQ numbers up to 9 and all I/O base
- addresses; but only supports DMA channel 1.
-
-
- * Thank you for playing the demo version of CYBERIA! *
-
-