home *** CD-ROM | disk | FTP | other *** search
-
- ================================================
- TROUBLE-SHOOTING FOR INSTALLING MAGIC DESK MENU
- ================================================
-
- I. I have installed MAGIC DESK menu, but there are no icons on the
- menu and I cannot launch any program.
-
- Possible Answers:
-
- 1. You may have chosen the wrong hard drive/ CD-ROM combination.
- Simply re-run the installation routine.
-
- 2. You have chosen the right hard drive/ CD-ROM combination, but
- your hard disk is NOT set at root level when you run the installation.
- So MAGIC DESK was installed as a subdirectory of another program.
- To correct, exit from the default directory of your hard disk to
- the root directory, then re-run the installation menu and choose
- the correct hard disk/ CD-ROM combination to re-install MAGIC DESK.
-
-
-
- ===============================
- BACK-UP INSTALLATION ROUTINES
- ===============================
-
- If for any reason that you could not install the MAGIC DESK menu
- through our regular installation procedures, you can use the
- following steps to manually installing the menu programs.
-
- We have the installation files of 36 different hard disk and CD-ROM
- combinations in the INSTALL directory of the CD-ROM. To figure out
- which files is for your hardware, use the follow examples:
-
- CDRDDR.EXE Means hard drive "C" with CD-ROM "D"
- DDREDR.EXE "D" "E"
- GDRIDR.EXE "G" "I"
-
- The first letter of the file name refers to the hard disk letter
- that you want MAGIC DESK to copy to; the fourth letter refers to
- the CD-ROM drive letter.
-
- ==========================================
- NON-AUTOMATIC INSTALLATION OF MAGIC DESK:
- ==========================================
-
- 1. Log into the ROOT level of your hard disk (e.g. C) and type
- MD SVI_MG <ENTER>
- 2. Then log into the new directory by typing
- CD SVI_MG <ENTER>
- 3. Copy the installation files for your hardware combination;
- for examples:
- * if you have hard disk "C" and CD-ROM "D", type:
- COPY D:\INSTALL\CDRDDR.EXE <ENTER>
- * if you have hard disk "D" and CD-ROM "E", type:
- COPY E:\INSTALL\DDREDR.EXE <ENTER>
- 4. Then uncompress the installation files, this will take about
- 2-3 minutes. Simple type the name of installation file.
- e.g.: CDRDDR <ENTER>
- 5. You may delete the compressed installation file if you want
- to save disk space (e.g. CDRDDR.EXE)
- 6. Type "GO" to run MAGIC DESK.
-
- (C)opyright 1995, Software Values International
- (C)opyright 1995, Maple Media, Inc.
-
-