home *** CD-ROM | disk | FTP | other *** search
Text File | 1994-11-16 | 49.5 KB | 1,114 lines |
- Faximum Client/Server Fax Software
- Sun Solaris Version
- Release 1.0 - EAP RC21 - 16 November 1994
- README File (%E%)
-
- COPYRIGHT 1994 Faximum Software Inc. All Rights Reserved.
-
- Faximum Software Inc.
- 1497 Marine Drive, Suite 300, West Vancouver, BC, Canada, V7T 1B8
-
- Phone: 1 (604) 925-3600
- Support: 1 (604) 922-7311
- Fax: 1 (604) 926-8182
- E-Mail: info@faximum.com
- support@faximum.com
-
- ==============================================================================
- Note: This software and related documentation is covered by a licence and may
- only be used under the terms of that licence. A copy of the licence may be
- found at the end of this file. Installation of this software is evidence that
- you have read and agree to be bound by the terms of this licence. If you do
- not agree with the licence then do not install the software and return the
- software to your vendor or to Faximum Software Inc. within 30 days of purchase
- for a full refund of your purchase price.
- ==============================================================================
-
- An Overview of This README File
- -------------------------------
-
- I. Preparing to Install the Software
- II. Installing the Software
- III. Configuring the Software
- IV. Removing the Software
- V. Resolving Problems and Contacting Technical Support
- VI. Known Problems with this Release
-
- Appendices
- A. The Software Licence
- B. The Software Registration Form
-
- A Special Note Regarding the Sun Solaris Version
- ------------------------------------------------
-
- This version of the Sun Solaris version is the version which has been
- shipped to Sun Microsystems for evaluation as their SunFax product. As a
- result you will see references to SunFax within this version.
-
- SunFax is a trademark of Sun Microsystems and when Faximum releases its own
- version of this product all references to SunFax will be replaced by Faximum.
-
- Please note also that certain advanced features of Faximum's normal fax
- product line (including the WP macro, line printer intercept, and others)
- are not a part of SunFax. They will be part of Faximum's Solaris product.
-
- Please note that the help files in this Early Availability Product are still
- being finished and some of the information may be incomplete. Please do not
- hesitate to contact Faximum Technical Support should you have any questions.
- We apologise for any inconvenience caused by these deficiencies and are working
- to remedy them.
-
- ==============================================================================
- I. Preparing to Install the Software
- ---------------------------------------
-
-
- 1. Verify that your system is running a supported version of the operation
- system and that the modem you plan to use is recommended for use with
- Faximum. (See the information below.)
-
-
- 2. Select the server machine.
-
- Select one of the machines on your network which is to act as the fax
- server for your network. The fax server machine is the one that will
- be connected to the fax modems.
-
- Faximum Client/Server is designed to allow multiple client machines
- access the fax services of one or more fax servers. You are permitted
- to install the client software on as many systems as you wish as long
- as (a) they are connected to a network with access to the machine that
- acts as the fax server and (b) the fax server machine has a properly
- licensed copy of the software installed.
-
-
- 3. Make sure you have sufficient disk space on the server and client
- machines to install the software.
-
- Note that currently the software must be installed in the
- /opt directory. (i.e. /opt/FAXserver amnd /opt/FAXclient).
- While the next release will permit installation in any directory
- this release must be installed in /opt. If this is a problem,
- create a symbolic link from /opt to the desired installation
- directory.
-
- The server package requires about 3.5 of space.
-
- The client package requires about 6Mb of space.
- The client package also requires the CDE Motif shared library be installed.
- If you are running Solaris 2.3, you will need to install the SUNWmfsmc
- package (included on the media provided with Faximum).
- If you are running Solaris 2.4, you will need to install the SUNWmfrun
- package (included on your Solaris 2.4 media).
-
-
-
- 4. Complete the registration form (attached to the end of this file).
-
- ***** IMPORTANT INFORMATION *****
-
- Note that in order to complete the configuration of the Faximum
- Client/Server software you will need to obtain a coded serial number
- and activation key from Faximum to enable your software. The
- registration form is also your request for an activation key.
- Faximum will respond within two business days with the necessary codes.
-
- Note that in order to complete the form you will need to know the system
- ID for the server machine. You may obtain this by typing in the command
- 'sysdef -h' on the server machine.
-
- ------------------------------------------------------------------------------
- Supported Hardware and Operating Systems
- ........................................
-
- This version of the Faximum Client/Server Fax software is designed to work
- with any Sparc compatible system running Sun Solaris 2.3.
-
- Note that while faxes may be submitted from character terminals, the Faximum
- Server requires access to a graphics console or X terminal in order to
- administer the product.
-
- While this software will probably run on Solaris systems prior to 2.3, it has
- not been tested on such systems and users are recommended to contact Faximum
- Technical Support prior to installing this software on pre-2.3 systems.
-
- ------------------------------------------------------------------------------
- Supported Fax Modems
- ....................
-
- In general, the Faximum Client/Server Fax software has been designed to work
- with any Class 2 or 2.0 (EIA-592) external fax modem.
-
- If you are uncertain whether your modem is Class 2 or 2.0, send the following
- command to the modem:
- AT+FCLASS=?
-
- If the response contains the digit 2 then it will probably work (at least to
- some degree) with the Faximum Client/Server software.
-
- Note that with Class 2 and 2.0 modems much of the low-level fax protocol is
- handled by the firmware in the modem. This means that problems sending or
- receiving faxes may be caused by the modem's firmware and not by Faximum's
- software. If such problems are reported to Faximum Technical Support and
- are determined to be modem problems then the user will be asked to contact
- the modem manufacturer for assistance.
-
- The modems listed below have all been used with some degree of success with
- Faximum. The modems listed in the first group have been found to be markedly
- superior in operation to those in the second group.
-
- Recommended Fax Modems:
- all MultiTech fax modems
- all Telebit fax modems
- all ZyXel fax modems
-
- Compatible Fax Modems:
- Computer Peripherals fax modems
- Intel FaxModems (but not SatisFAXtion modems)
- Practical Peripherals fax modems
- Supra
- US Robotics modems with Class 2 fax support
- most Rockwell-based modems
-
- Note that at the time this file was written Hayes does not support Class 2
- fax operation with any of their modems.
-
- Faximum Software sells MultiTech 14,400 Data/Fax modems. Please contact
- us for current pricing (the price as of August 1994 was US$199).
-
- ==============================================================================
- II. Installing the Software
- -----------------------------
-
- 1. If you are installing the software from tape:
-
- Extract the files from the solaris directory on tape into a temporary
- directory on the system that is to become the fax server machine.
- For example:
-
- cd /tmp
- tar xvf /dev/rmt/0 solaris
-
- This will create a sub-directory called solaris containing the following
- files:
- README
- faxserver.tar
- faxclient.tar
-
- The README file contains a copy of these installation instructions.
-
- If you have retrieved this software by FTP, uncompress the tar file
- and use tar to extract these three files:
-
- uncompress faximum.solaris.tar.Z
- tar xvf faximum.solaris.tar
-
- 2. As root, untar the server files:
-
- # tar xvf faxserver.tar
- x FAXserver/, 0 bytes, 0 tape blocks
- x FAXserver/pkgmap, 7218 bytes, 15 tape blocks
- x FAXserver/pkginfo, 284 bytes, 1 tape blocks
- x FAXserver/reloc/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/asciitiff, 169676 bytes, 332 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/dpstiff, 122812 bytes, 240 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/rastiff, 25036 bytes, 49 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffcat, 7540 bytes, 15 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffcompress, 8380 bytes, 17 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffcut, 8956 bytes, 18 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffhp, 28132 bytes, 55 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffls, 12580 bytes, 25 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffps, 27804 bytes, 55 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffras, 12236 bytes, 24 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffsplit, 7804 bytes, 16 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tiffstdres, 7868 bytes, 16 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/bin/tifftiff, 23044 bytes, 46 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/convert/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/convert/ascii, 1500 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/convert/ps, 1105 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/convert/sunraster, 932 bytes, 2 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/convert/tiff, 1015 bytes, 2 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/coversheet/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/coversheet/coversheet, 1272 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/coversheet/retry, 1363 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/account.dat, 169 bytes, 1 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/account.idx, 2048 bytes, 4 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/action.dat, 573 bytes, 2 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/action.idx, 2048 bytes, 4 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/class.dat, 138 bytes, 1 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/class.idx, 2560 bytes, 5 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/dialrule.dat, 970 bytes, 2 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/dialrule.idx, 2560 bytes, 5 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/dialrulels.dat, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/dialrulels.idx, 1536 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/dispatch.dat, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/dispatch.idx, 2048 bytes, 4 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/permission.dat, 231 bytes, 1 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/permission.idx, 2048 bytes, 4 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/permlist.dat, 234 bytes, 1 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/permlist.idx, 1536 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/printer.dat, 1155 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/printer.idx, 2560 bytes, 5 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/style.dat, 2571 bytes, 6 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/style.idx, 2560 bytes, 5 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/tariff.dat, 1082 bytes, 3 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/tariff.idx, 2048 bytes, 4 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/user.dat, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/database/user.idx, 2048 bytes, 4 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/dev/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/dev/pcmcia, 331 bytes, 1 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/fs/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/fs/config, 790 bytes, 2 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/fs/faxfs, 301036 bytes, 588 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/fs/fs-errors, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/dcheck, 58812 bytes, 115 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/dispatch, 179492 bytes, 351 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/faxcico, 236588 bytes, 463 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/faxlisten, 65884 bytes, 129 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/faxsched, 64900 bytes, 127 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/keycheck, 22012 bytes, 43 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/libtiff-f.so.1, 112404 bytes, 220 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/mfax, 218772 bytes, 428 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/modemtab, 401 bytes, 1 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/newaccount, 64100 bytes, 126 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/newcovers, 16570 bytes, 33 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/newstyles, 71332 bytes, 140 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/server, 274172 bytes, 536 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/lib/sunfax.daily, 2838 bytes, 6 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/ps/, 0 bytes, 0 tape blocks
- x FAXserver/reloc/$DESTDIR/FAXserver/ps/standard.ps, 6375 bytes, 13 tape blocks
- x FAXserver/root/, 0 bytes, 0 tape blocks
- x FAXserver/root/etc/, 0 bytes, 0 tape blocks
- x FAXserver/root/etc/inet/, 0 bytes, 0 tape blocks
- x FAXserver/root/etc/inet/inetd.conf, 387 bytes, 1 tape blocks
- x FAXserver/root/etc/inet/services, 275 bytes, 1 tape blocks
- x FAXserver/root/etc/rc2.d/, 0 bytes, 0 tape blocks
- x FAXserver/root/etc/rc2.d/S99sunfax, 2909 bytes, 6 tape blocks
- x FAXserver/root/etc/sunfax.conf, 1595 bytes, 4 tape blocks
- x FAXserver/root/usr/, 0 bytes, 0 tape blocks
- x FAXserver/root/usr/lib/, 0 bytes, 0 tape blocks
- x FAXserver/root/usr/lib/locale/, 0 bytes, 0 tape blocks
- x FAXserver/root/usr/lib/locale/C/, 0 bytes, 0 tape blocks
- x FAXserver/root/usr/lib/locale/C/LC_MESSAGES/, 0 bytes, 0 tape blocks
- x FAXserver/root/usr/lib/locale/C/LC_MESSAGES/faxserver.cat, 21331 bytes, 42 tape blocks
- x FAXserver/root/var/, 0 bytes, 0 tape blocks
- x FAXserver/root/var/spool/, 0 bytes, 0 tape blocks
- x FAXserver/root/var/spool/cron/, 0 bytes, 0 tape blocks
- x FAXserver/root/var/spool/cron/crontabs/, 0 bytes, 0 tape blocks
- x FAXserver/root/var/spool/cron/crontabs/root, 77 bytes, 1 tape blocks
- x FAXserver/root/var/spool/fax/, 0 bytes, 0 tape blocks
- x FAXserver/root/var/spool/fax/acct, 0 bytes, 0 tape blocks
- x FAXserver/root/var/spool/fax/log, 0 bytes, 0 tape blocks
- x FAXserver/install/, 0 bytes, 0 tape blocks
- x FAXserver/install/copyright, 2739 bytes, 6 tape blocks
- x FAXserver/install/i.cron, 690 bytes, 2 tape blocks
- x FAXserver/install/postinstall, 119 bytes, 1 tape blocks
- x FAXserver/install/postremove, 167 bytes, 1 tape blocks
- x FAXserver/install/preremove, 216 bytes, 1 tape blocks
- x FAXserver/install/r.cron, 575 bytes, 2 tape blocks
- x FAXserver/install/request, 489 bytes, 1 tape blocks
-
- Note that the list of files and their sizes may differ from these
- examples.
-
- 3. Install the server software by running the pkgadd utility. When asked
- where to install the software, press Enter (or Return) to accept the
- default (/opt). As mentioned earlier, installation in other directories
- is not yet supported. For example:
-
- # pkgadd -d .
-
- The following packages are available:
- 1 FAXclient SunFax client package
- (sparc) 1.0
- 2 FAXserver SunFax server package
- (sparc) 1.0
-
- Select package(s) you wish to process (or 'all' to process
- all packages). (default: all) [?,??,q]: 2
-
- Processing package instance <FAXserver> from </usr/spool/pkg>
-
- SunFax server package
- (sparc) 1.0
- Copyright 1994 Sun Microsystems, Inc. All Rights Reserved
- Printed in the United States of America.
- 2550 Garcia Avenue, Mountain View, California, 94043-1100 U.S.A.
-
- The copyright in portions of this product are owned by Faximum
- Software, Inc. and by Hewlett-Packard Company and are used herein by
- permission.
-
- This product and related documentation is protected by copyright and
- distributed under licenses restricting its use, copying, distribution
- and decompilation. No part of this product or related documentation
- may be reproduced in any form by any means without prior written
- authorization of Sun and its licensors, if any.
-
- Portions of this product may be derived from the UNIX(R) and Berkeley 4.3
- BSD systems, licensed from UNIX Systems Laboratories, Inc. and the
- University of California, respectively. Third party font software in this
- product is protected by copyright and licensed from Sun's Font Suppliers.
-
- RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government
- is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the
- Rights in Technical Data and Computer Software clause at DFARS 252.227-7013
- and FAR 52.227-19.
-
- The OPEN LOOK(R) and Sun(R) Graphical User Interfaces were developed by
- Sun Microsystems, Inc. for its users and licensees. Sun acknowledges the
- pioneering efforts of Xerox(R) in researching and developing the concept of
- visual or graphical user interfaces for the computer industry. Sun holds
- a non-exclusive license from Xerox to the Xerox Graphical User Interface,
- which license also covers Sun's licensees who implement OPEN LOOK GUIs and
- otherwise comply with Sun's written license agreements.
-
- The X Window System is a product of the Massachusetts Institute of Technology.
-
- Sun, Sun Microsystems, the Sun Logo, Solaris, SunOS, ONC, NFS, OpenWindows,
- DeskSet, AnswerBook, SunLink, SunView, SunDiag, NeWS, OpenBoot, OpenFonts,
- SunInstall, SunNet, ToolTalk, X11/NeWS and XView are trademarks or registered
- trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of Novell,
- Inc. in the United States and other countries. X/Open Company, Ltd. is the
- exclusive licensor of such trademark. PostScript is a trademark of Adobe
- Systems, Inc. which may be registered in some jurisdictions. All other
- product names mentioned herein are the trademarks of their respective owners.
-
- All SPARC trademarks, including the SCD Compliant Logo, are trademarks or
- registered trademarks of SPARC International, Inc. SPARCstation, SPARCserver,
- SPARCengine, SPARCworks and SPARCompiler are licensed exclusively to Sun
- Microsystems, Inc. Products bearing SPARC trademarks are based upon an
- architecture developed by Sun Microsystems, Inc.
- Using </opt> as the package base directory.
-
- Where should this package be installed [?,q] <CR>
- Checking for /opt/FAXserver
- Setting CLASSES To "none build noupdate" in file "/tmp/installa000cw/respa000cw"
- ## Processing package information.
- ## Processing system information.
- ## Verifying disk space requirements.
- ## Checking for conflicts with packages already installed.
- ## Checking for setuid/setgid programs.
-
- The following files are being installed with setuid and/or setgid
- permissions or are overwriting files which are currently
- setuid/setgid:
- /opt/FAXserver/lib/faxcico <setuid daemon>
- /opt/FAXserver/lib/faxcico <setgid uucp>
- /opt/FAXserver/lib/faxlisten <setgid uucp>
- /opt/FAXserver/lib/mfax <setuid daemon>
- /opt/FAXserver/lib/mfax <setgid uucp>
-
- Do you want to install these setuid/setgid files [y,n,?,q] y
- This package contains scripts which will be executed with super-user
- permission during the process of installing this package.
-
- Do you want to continue with the installation of this package [y,n,?] y
- Installing SunFax server package as <FAXserver>
-
- ## Installing part 1 of 1.
- /etc/rc2.d/S99sunfax
- /opt/FAXserver/bin/asciitiff
- /opt/FAXserver/bin/dpstiff
- /opt/FAXserver/bin/rastiff
- /opt/FAXserver/bin/tiffcat
- /opt/FAXserver/bin/tiffcompress
- /opt/FAXserver/bin/tiffcut
- /opt/FAXserver/bin/tiffhp
- /opt/FAXserver/bin/tiffls
- /opt/FAXserver/bin/tiffps
- /opt/FAXserver/bin/tiffras
- /opt/FAXserver/bin/tiffsplit
- /opt/FAXserver/bin/tiffstdres
- /opt/FAXserver/bin/tifftiff
- /opt/FAXserver/convert/ascii
- /opt/FAXserver/convert/ps
- /opt/FAXserver/convert/sunraster
- /opt/FAXserver/convert/tiff
- /opt/FAXserver/fs/faxfs
- /opt/FAXserver/fs/fs-errors
- /opt/FAXserver/lib/dcheck
- /opt/FAXserver/lib/dispatch
- /opt/FAXserver/lib/faxcico
- /opt/FAXserver/lib/faxlisten
- /opt/FAXserver/lib/faxsched
- /opt/FAXserver/lib/keycheck
- /opt/FAXserver/lib/libtiff-f.so <symbolic link>
- /opt/FAXserver/lib/libtiff-f.so.1
- /opt/FAXserver/lib/mfax
- /opt/FAXserver/lib/modemtab
- /opt/FAXserver/lib/newaccount
- /opt/FAXserver/lib/newcovers
- /opt/FAXserver/lib/newstyles
- /opt/FAXserver/lib/server
- /opt/FAXserver/lib/sunfax.daily
- /opt/FAXserver/ps/standard.ps
- /usr/lib/locale/C/LC_MESSAGES/faxserver.cat
- [ verifying class <none> ]
- /etc/init.d/sunfax <linked pathname>
- /opt/FAXserver/lib/newaction <linked pathname>
- /opt/FAXserver/lib/newclass <linked pathname>
- /opt/FAXserver/lib/newdialrule <linked pathname>
- /opt/FAXserver/lib/newdialrulelst <linked pathname>
- /opt/FAXserver/lib/newdispatch <linked pathname>
- /opt/FAXserver/lib/newpermission <linked pathname>
- /opt/FAXserver/lib/newpermlist <linked pathname>
- /opt/FAXserver/lib/newprinter <linked pathname>
- /opt/FAXserver/lib/newstyle <linked pathname>
- /opt/FAXserver/lib/newtariff <linked pathname>
- /opt/FAXserver/lib/newuser <linked pathname>
- Modifying /etc/inet/inetd.conf
- Modifying /etc/inet/services
- Modifying /etc/sunfax.conf
- Modifying /opt/FAXserver/fs/config
- [ verifying class <build> ]
- /opt/FAXserver/coversheet/coversheet
- /opt/FAXserver/coversheet/retry
- /opt/FAXserver/database/account.dat
- /opt/FAXserver/database/account.idx
- /opt/FAXserver/database/action.dat
- /opt/FAXserver/database/action.idx
- /opt/FAXserver/database/class.dat
- /opt/FAXserver/database/class.idx
- /opt/FAXserver/database/dialrule.dat
- /opt/FAXserver/database/dialrule.idx
- /opt/FAXserver/database/dialrulels.dat
- /opt/FAXserver/database/dialrulels.idx
- /opt/FAXserver/database/dispatch.dat
- /opt/FAXserver/database/dispatch.idx
- /opt/FAXserver/database/permission.dat
- /opt/FAXserver/database/permission.idx
- /opt/FAXserver/database/permlist.dat
- /opt/FAXserver/database/permlist.idx
- /opt/FAXserver/database/printer.dat
- /opt/FAXserver/database/printer.idx
- /opt/FAXserver/database/style.dat
- /opt/FAXserver/database/style.idx
- /opt/FAXserver/database/tariff.dat
- /opt/FAXserver/database/tariff.idx
- /opt/FAXserver/database/user.dat
- /opt/FAXserver/database/user.idx
- /opt/FAXserver/dev/pcmcia
- /var/spool/fax/acct
- /var/spool/fax/log
- [ verifying class <noupdate> ]
- ## Executing postinstall script.
- Changing /var/spool/locks to 775
-
- Installation of <FAXserver> was successful.
-
- The following packages are available:
- 1 FAXclient SunFax client package
- (sparc) 1.0
- 2 FAXserver SunFax server package
- (sparc) 1.0
-
- Select package(s) you wish to process (or 'all' to process
- all packages). (default: all) [?,??,q]: q
-
-
- 4. To install the client software, copy the faxclient.tar file to
- the client system and unpack it:
-
- # tar xvf faxclient.tar
- x FAXclient/, 0 bytes, 0 tape blocks
- x FAXclient/pkgmap, 3831 bytes, 8 tape blocks
- x FAXclient/pkginfo, 284 bytes, 1 tape blocks
- x FAXclient/reloc/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/bin/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/bin/fax, 2984476 bytes, 5830 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/bin/tiffps, 27804 bytes, 55 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/bin/tiffras, 12236 bytes, 24 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Courier-Bold.afm, 12416 bytes, 25 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Courier-BoldOblique.afm, 12414 bytes, 25 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Courier-Oblique.afm, 12394 bytes, 25 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Courier.afm, 12340 bytes, 25 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Helvetica-Bold.afm, 14505 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Helvetica-BoldOblique.afm, 14566 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Helvetica-Oblique.afm, 14544 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Helvetica.afm, 14562 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-Bold.afm, 14552 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-BoldItalic.afm, 14704 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-Italic.afm, 14659 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-Roman.afm, 14565 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Symbol.afm, 9486 bytes, 19 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Times-Bold.afm, 14776 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Times-BoldItalic.afm, 14696 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Times-Italic.afm, 14786 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/FontMetrics/AFM/Times-Roman.afm, 14652 bytes, 29 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/PSstd.fonts, 3507 bytes, 7 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/Xprinter.prolog, 2036 bytes, 4 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/Xp/rgb.txt, 16992 bytes, 34 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/fax.hlp, 744158 bytes, 1454 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/help/hoh.hlp, 86576 bytes, 170 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/lib/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/lib/hyperhelp, 2441324 bytes, 4769 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/lib/libtiff-f.so.1, 112404 bytes, 220 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/lib/submitfax, 151996 bytes, 297 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/lp/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/lp/model, 2763 bytes, 6 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/printers/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/printers/Default, 697 bytes, 2 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/ps/, 0 bytes, 0 tape blocks
- x FAXclient/reloc/$DESTDIR/FAXclient/ps/standard.ps, 6375 bytes, 13 tape blocks
- x FAXclient/root/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/lib/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/lib/locale/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/lib/locale/C/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/lib/locale/C/LC_MESSAGES/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/lib/locale/C/LC_MESSAGES/faxclient.cat, 54307 bytes, 107 tape blocks
- x FAXclient/root/usr/openwin/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/openwin/lib/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/openwin/lib/app-defaults/, 0 bytes, 0 tape blocks
- x FAXclient/root/usr/openwin/lib/app-defaults/Fax, 11096 bytes, 22 tape blocks
- x FAXclient/root/usr/openwin/lib/app-defaults/HyperHelp, 3892 bytes, 8 tape blocks
- x FAXclient/install/, 0 bytes, 0 tape blocks
- x FAXclient/install/copyright, 2739 bytes, 6 tape blocks
- x FAXclient/install/request, 498 bytes, 1 tape blocks
-
- Note that the list of files and their sizes may differ from these
- examples.
-
-
- 5. Install the client software by running the pkgadd utility When asked
- where to install the software, press Enter (or Return) to accept the
- default (/opt). As mentioned earlier, installation in other directories
- is not yet supported. For example:
-
- # pkgadd -d .
-
- The following packages are available:
- 1 FAXclient SunFax client package
- (sparc) 1.0
- 2 FAXserver SunFax server package
- (sparc) 1.0
-
- Select package(s) you wish to process (or 'all' to process
- all packages). (default: all) [?,??,q]: 1
-
- Processing package instance <FAXclient> from </usr/spool/pkg>
-
- SunFax client package
- (sparc) 1.0
- Copyright 1994 Sun Microsystems, Inc. All Rights Reserved
- Printed in the United States of America.
- 2550 Garcia Avenue, Mountain View, California, 94043-1100 U.S.A.
-
- The copyright in portions of this product are owned by Faximum
- Software, Inc. and by Hewlett-Packard Company and are used herein by
- permission.
-
- This product and related documentation is protected by copyright and
- distributed under licenses restricting its use, copying, distribution
- and decompilation. No part of this product or related documentation
- may be reproduced in any form by any means without prior written
- authorization of Sun and its licensors, if any.
-
- Portions of this product may be derived from the UNIX(R) and Berkeley 4.3
- BSD systems, licensed from UNIX Systems Laboratories, Inc. and the
- University of California, respectively. Third party font software in this
- product is protected by copyright and licensed from Sun's Font Suppliers.
-
- RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government
- is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the
- Rights in Technical Data and Computer Software clause at DFARS 252.227-7013
- and FAR 52.227-19.
-
- The OPEN LOOK(R) and Sun(R) Graphical User Interfaces were developed by
- Sun Microsystems, Inc. for its users and licensees. Sun acknowledges the
- pioneering efforts of Xerox(R) in researching and developing the concept of
- visual or graphical user interfaces for the computer industry. Sun holds
- a non-exclusive license from Xerox to the Xerox Graphical User Interface,
- which license also covers Sun's licensees who implement OPEN LOOK GUIs and
- otherwise comply with Sun's written license agreements.
-
- The X Window System is a product of the Massachusetts Institute of Technology.
-
- Sun, Sun Microsystems, the Sun Logo, Solaris, SunOS, ONC, NFS, OpenWindows,
- DeskSet, AnswerBook, SunLink, SunView, SunDiag, NeWS, OpenBoot, OpenFonts,
- SunInstall, SunNet, ToolTalk, X11/NeWS and XView are trademarks or registered
- trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of Novell,
- Inc. in the United States and other countries. X/Open Company, Ltd. is the
- exclusive licensor of such trademark. PostScript is a trademark of Adobe
- Systems, Inc. which may be registered in some jurisdictions. All other
- product names mentioned herein are the trademarks of their respective owners.
-
- All SPARC trademarks, including the SCD Compliant Logo, are trademarks or
- registered trademarks of SPARC International, Inc. SPARCstation, SPARCserver,
- SPARCengine, SPARCworks and SPARCompiler are licensed exclusively to Sun
- Microsystems, Inc. Products bearing SPARC trademarks are based upon an
- architecture developed by Sun Microsystems, Inc.
- Using </opt> as the package base directory.
-
- Where should this package be installed [?,q] <CR>
- Checking for /opt/FAXclient
- Setting CLASSES To "none build cron noupdate" in file "/tmp/installa000co/respa000co"
- ## Processing package information.
- ## Processing system information.
- ## Verifying disk space requirements.
- ## Checking for conflicts with packages already installed.
- ## Checking for setuid/setgid programs.
-
- Installing SunFax client package as <FAXclient>
-
- ## Installing part 1 of 1.
- /opt/FAXclient/bin/fax
- /opt/FAXclient/bin/tiffps
- /opt/FAXclient/bin/tiffras
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Courier-Bold.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Courier-BoldOblique.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Courier-Oblique.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Courier.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Helvetica-Bold.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Helvetica-BoldOblique.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Helvetica-Oblique.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Helvetica.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-Bold.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-BoldItalic.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-Italic.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/NewCenturySchlbk-Roman.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Symbol.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Times-Bold.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Times-BoldItalic.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Times-Italic.afm
- /opt/FAXclient/help/Xp/FontMetrics/AFM/Times-Roman.afm
- /opt/FAXclient/help/Xp/PSstd.fonts
- /opt/FAXclient/help/Xp/Xprinter.prolog
- /opt/FAXclient/help/Xp/rgb.txt
- /opt/FAXclient/help/fax.hlp
- /opt/FAXclient/help/hoh.hlp
- /opt/FAXclient/lib/hyperhelp
- /opt/FAXclient/lib/libtiff-f.so <symbolic link>
- /opt/FAXclient/lib/libtiff-f.so.1
- /opt/FAXclient/lib/submitfax
- /opt/FAXclient/lp/model
- /opt/FAXclient/printers/Default
- /opt/FAXclient/ps/standard.ps
- /usr/lib/locale/C/LC_MESSAGES/faxclient.cat
- [ verifying class <none> ]
- /usr/openwin/lib/app-defaults/Fax
- /usr/openwin/lib/app-defaults/HyperHelp
- [ verifying class <noupdate> ]
-
- Installation of <FAXclient> was successful.
-
- The following packages are available:
- 1 FAXclient SunFax client package
- (sparc) 1.0
- 2 FAXserver SunFax server package
- (sparc) 1.0
-
- Select package(s) you wish to process (or 'all' to process
- all packages). (default: all) [?,??,q]: q
-
-
- 6. Copy the faxclient.tar file to other HP-UX machines that you wish to
- act as clients and repeat the above two steps to install the Faximum
- client software.
-
- ==============================================================================
- III. Configuring the Software
- ------------------------------
-
- ------------------------------------------------------------------------------
- Server Configuration
- ....................
-
- Note that in order to complete the configuration of the Faximum server
- software you will need a serial number and activation key from Faximum
- Software. As mentioned in Section I earlier, these are obtained by
- completing the registration form and sending it to Faximum Software.
-
- As part of the configuration process you will need to edit several text
- files. You may use any text editor you are familiar with such as vi,
- emacs, or HP's vuepad.
-
- 1. Edit the file /etc/sunfax.conf and change the lines that begin:
- key =
- serial =
- to match those shown on the form sent to you by Faximum Software.
-
-
- 2. Edit the file /opt/FAXserver/dev/pcmcia and change the line
- that begins:
- device =
- to reference the serial communications port that you will be
- connecting the modem to.
-
- You must disable this port for normal logins or else the system
- login processes will conflict with the Faximum Server software.
-
-
- Also edit the line that begins:
- tsi =
- so that it contains your fax phone number. For example:
- tsi = "1 604 926 8182"
- (Use only digits, spaces, and the + symbol.)
-
-
- Also edit the line that begins:
- class2-type =
- so that it reads:
- class2-type = auto
-
- Note that the Faximum server ships with a set of default cover sheets.
- While these are sufficient for testing the product, you ought to define
- new cover sheets that properly identify your company. You can do this
- by running the foolowing program:
- /opt/FAXserver/lib/newcovers
- and answering the appropriate questions.
-
-
- ------------------------------------------------------------------------------
- Client Configuration
- ....................
-
- If you are installing the client on a machine other than the machine the
- server is installed on, you will need to do the following.
-
-
- 1. Edit the file /usr/openwin/lib/app-defaults/Fax and change the line
- that reads:
- fax.server: localhost
- to reference the system that will be acting as the fax server. For
- example:
- fax.server: manet.company.com
-
- 2. Or, if you prefer, you can define (in the /etc/hosts) an alias for the
- fax server. For example:
- 133.45.67.23 manet.company.com faxhost
-
- and change the definition of fax.server: in app-defaults/FAX
- to reference faxhost instead of localhost
-
- 3. Edit the file /opt/FAXclient/lp/model and change the line that reads:
- FAXHOST=localhost
- to define FAXHOST as either faxhost or the actual name of the fax server.
-
- 4. Note that if you are planning to use the submitfax tool it will try to
- connect to 'faxhost' unless another host name is specified either by
- using the FAXHOST environment variable or by using the -h flag
- (i.e. submitfax -h server.name)
-
- ***** IMPORTANT NOTE *****
-
- If you are running NIS or NIS+ then you will need to copy the changes made to the
- /etc/hosts and /etc/services to the NIS/NIS+ master. The change to the /etc/services
- file can be found on the last line.
-
- ------------------------------------------------------------------------------
- Starting the Fax Daemons
- ........................
-
- After you have configured the software, you must start the background
- processes which schedule the faxes and control the modem.
-
- This will be done automatically when you reboot your system. You can also
- do this manually by running:
- /etc/init.d/sunfax start
-
- Should you wish to terminate the fax daemons, type:
- /etc/init.d/sunfax stop
-
- ------------------------------------------------------------------------------
- Starting the Fax Client
- .......................
-
- To run the Faximum Client software, type:
- /opt/FAXclient/bin/fax
-
- To make this easier, you may wish to:
- (a) put /opt/FAXclient/bin in the search path of those who wish to use
- the Faximum Client software; or
- (b) copy /opt/FAXclient/bin/fax to a directory that is already in your
- users' search path (perhaps /usr/local/bin, or /usr/bin).
-
-
- ------------------------------------------------------------------------------
- Accessing Help
- ..............
-
- All of the documentation for the Faximum Client/Server product is stored
- on-line. This can be accessed through the Faximum Client software by selecting
- the Help menu. It can also be accessed directly by running the
- HyperHelp viewer:
-
- LD_LIBRARY_PATH=/usr/openwin/lib /opt/FAXclient/lib/hyperhelp /opt/FAXclient/help/fax.hlp
-
-
-
- ===========================================================================
- IV. Removing the Software
- ---------------------------
-
- To remove the server software:
-
- 1. Stop the Faximum daemons by typing (as root):
- /etc/init.d/sunfax stop
-
- 2. Type the following (as root):
- pkgrm FAXserver
-
- To remove the client software:
- pkgrm FAXclient
-
-
- ==============================================================================
- V. Resolving Problems and Contacting Technical Support
- ---------------------------------------------------------
-
- Faximum Technical Support may be reached by phone at +1 (604) 922-7311
- between the hours of 8:30am and 1pm Pacific Time.
-
- ==============================================================================
- VI. Known Problems with this Release
- --------------------------------------
-
- Please note that while this software has been extensively tested within
- Faximum's engineering labs and has been used by several Beta test sites,
- the software is sufficiently new that problems may be expected to arise
- from time to time.
-
- In order to minimise the disruption caused by such problems, Faximum Software
- will extend special support to all EAP (Early Availability Product) customers.
-
- When calling during normal support hours (see above), please identify yourself
- as an Solaris EAP customer. Should you need support after normal support hours,
- please call the main Faximum number, (604) 925-3600, identify yourself as
- an Solaris EAP customer, and ask for special technical support.
-
- With the current EAP release (RC13) there is one known defect that may cause
- problems while using the Faximum Client. During any single session, the client
- software is prone to exit abruptly if asked to preview an outgoing fax or
- view an incoming fax more than once. This problem sometimes also occurs when
- in other parts of the product. We are working on this problem and hope
- to have a fix available shortly. If you are able to reproduce this problem
- reliably we should very much appreciate learning the details.
-
- We also acknowledge that significant work remains to finish the on-line help.
-
- Please also note that the WordPerfect fax macro is not available with this
- release.
-
- Comments and suggestions regarding the software are always welcome. Please
- send your comments to support@Faximum.com or fax them to (604) 926-8182.
-
-
- ==============================================================================
- Appendices
- A. The Software Licence
- --------------------------
-
- Faximum Software Inc. ("Faximum")
-
- Software Licence Agreement
-
- Before opening the software diskette package, you ought to read carefully all
- of the terms and conditions of this Licence Agreement. Installing the software
- indicates your acceptance of the terms and conditions of this Licence
- Agreement. If you do not agree with any of the terms and conditions of this
- Licence Agreement, you must promptly return the software along with the manuals
- and other parts of the software package to the location where you obtained same
- and your money will be refunded. If the location where you obtained the
- software package refuses to refund your money then you must contact Faximum
- for your refund.
-
- The terms and conditions of this Agreement apply to the Faximum Software
- including any copy. The term "Faximum Software" means programs and related
- documentation supplied herewith.
-
- 1 GRANT OF LICENCE
- 1.1 Faximum hereby grants you a personal, non-transferable, and
- non-exclusive right to use the Faximum Software within Canada and the
- United States (the "Territory") subject to the terms and conditions
- herein contained.
-
- 2 LIMITATIONS ON USE
- 2.1 You may only use the Faximum Software in a single computer system and
- the copy of the Faximum Software provided herewith may only be
- installed on one machine.
- 2.2 If you wish to install the Faximum Software on another machine, you
- must either remove the Faximum Software from the machine on which it
- has previously been installed or you must purchase an additional copy
- of Faximum Software for each additional machine.
- 2.3 You agree to obtain prior written approval from Faximum for
- multi-processor usage.
- 2.4 You may make two (2) copies of the Faximum Software solely for your
- own archival back-up purposes. All such copies must be labelled with
- the same copyright notice and proprietary markings which appear on the
- original Faximum Software media. If you obtained the software
- electronically, yhen the copies must be labelled "Copyright 1994
- Faximum Software Inc."
-
- 3 Non Permitted Uses
- 3.1 You may not electronically transfer the Faximum Software except as
- herein permitted.
- 3.2 You may not reverse engineer, disassemble, reverse translate, or in
- any way derive from the Faximum Software any source code form.
- 3.3 You may not tamper or otherwise attempt to change the serial number or
- other identifying information stored within the Faximum Software or
- divulge to others your Faximum Software activation key.
- 3.4 You may not use the Faximum Software except within the Territory.
-
- 4 TERM
- 4.1 This Licence Agreement is effective until terminated.
- 4.2 You may terminate this Licence Agreement by destroying the Faximum
- Software and all copies thereof.
- 4.3 This Licence Agreement will terminate if you fail to comply with any
- term or condition of this Agreement.
- 4.4 Upon notification from Faximum that this Agreement has terminated, you
- will destroy all copies of the Faximum Software and you will certify
- to Faximum Software in writing that you have done so.
- 4.5 Upon termination, there will be no refund of any monies or other
- consideration paid by you.
-
- 5 LIMITED WARRANTY
- 5.1 YOU ACKNOWLEDGE AND AGREE THAT FAXIMUM SOFTWARE IS PROVIDED TO YOU
- "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
- INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR
- FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE WAIVED BY YOU.
- 5.2 YOU ACKNOWLEDGE AND AGREE THAT FAXIMUM DOES NOT WARRANT THAT THE
- FUNCTIONS OF THE FAXIMUM SOFTWARE WILL BE ERROR-FREE OR UNINTERRUPTED.
- 5.3 YOU ASSUME THE RISK OF ANY AND ALL DAMAGE OR LOSS FROM USE OR INABILITY
- TO USE THE FAXIMUM SOFTWARE.
- 5.4 THE WARRANTIES HEREIN CONTAINED EXTEND ONLY TO YOU AND SHALL NOT BE
- APPLICABLE TO ANY OTHER PERSON OR ENTITY.
-
- 6 LIMITATION OF REMEDIES
- 6.1 YOU ACKNOWLEDGE AND AGREE THAT YOUR SOLE AND EXCLUSIVE REMEDY AGAINST
- FAXIMUM, ITS AFFILIATES, CONTRACTORS, SUPPLIERS, AND AGENTS FOR LOSS
- OR DAMAGE ARISING DIRECTLY OR INDIRECTLY FROM THE MANUFACTURE, SALE,
- OR SUPPLY OF THE FAXIMUM SOFTWARE OR ANY DEFECT OR FAILURE THEREOF
- REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT, OR
- OTHERWISE (INCLUDING WITHOUT LIMITATION, NEGLIGENCE, AND STRICT
- LIABILITY), SHALL BE REPLACEMENT OF THE FAXIMUM SOFTWARE, PROVIDED
- THAT THE FAXIMUM SOFTWARE IS RETURNED TO FAXIMUM WITH A COPY OF YOUR
- SALES RECEIPT.
- 6.2 NEITHER FAXIMUM NOR ITS AFFILIATES, CONTRACTORS, SUPPLIERS, OR AGENTS
- SHALL BE LIABLE FOR ANY INDIRECT, INCIDENTAL, OF CONSEQUENTIAL DAMAGES
- (INCLUDING LOST PROFITS) SUSTAINED OR INCURRED BY YOU OR ANY OTHER
- PERSON IN CONNECTION WITH THE USE, OPERATION, OR INABILITY TO USE THE
- FAXIMUM SOFTWARE.
- 6.3 NO SUPPLIER, REPRESENTATIVE, OR AGENT OF FAXIMUM IS ENTITLED TO OFFER
- TO YOU ANY REPRESENTATIONS, WARRANTIES, OR INDEMNITIES WHICH ARE NOT
- EXPRESSLY CONTAINED IN THIS LICENCE AGREEMENT; THE LIABILITY OF FAXIMUM
- SHALL BE LIMITED AS STATED ABOVE NOTWITHSTANDING THAT FAXIMUM OR ANY
- AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF
- DAMAGES OR POTENTIAL FOR DAMAGES.
-
- 7 MISCELLANEOUS
- 7.1 This Licence Agreement shall be governed by and construed in accordance
- with the laws of the Province of British Columbia (Canada).
- 7.2 You agree that any disputes with respect to the Faximum Software or
- this Licence Agreement shall be brought in the courts of the Province
- of British Columbia.
- 7.3 If any provision hereof shall be deemed by any court to be invalid,
- legality and enforceability of the remaining provisions hereof shall
- not be affected or impaired.
- 7.4 This Agreement enures to the benefit of and shall be binding upon you,
- your successors, heirs, and assigns and Faximum Software, its
- successors, and assigns.
- 7.5 All provisions of this Licence are also intended for the benefit of
- Faximum, and its suppliers who can enforce this Agreement without
- requiring your prior consent.
- 7.6 Some jurisdictions do not allow the exclusion of implied warranties;
- if so, only those limitations of warranty which are specifically
- prohibited by law notwithstanding contractual provisions to the
- contrary will not apply to you.
-
- 8 ACKNOWLEDGEMENT
- 8.1 BY INSTALLING THE SOFTWARE PACKAGE YOU ACKNOWLEDGE THAT YOU HAVE READ
- THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND
- CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT SUPERSEDES ALL PRIOR
- AGREEMENTS AND UNDERSTANDINGS BETWEEN YOU AND FAXIMUM RELATING TO THE
- FAXIMUM SOFTWARE AND IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE
- TERMS AND CONDITIONS OF YOUR AGREEMENT WITH FAXIMUM.
-
-
- RESTRICTED RIGHTS LEGEND
-
- Use, duplication, or disclosure by the U.S. Government is subject to
- restrictions as set forth in subparagraph (c) (1) (ii) of the Rights
- in Technical Data and Computer Software clause in DFARS 252.227-7013.
- Rights for non-DOD U.S. Government Departments and Agencies are as set
- forth in FAR 52.227-19(c) (1,2).
-
- Faximum Software Inc.
- 1497 Marine Drive, Suite 300
- West Vancouver, BC, Canada, V7T 1B8
-
- ==============================================================================
- B. The Software Registration Form
- ------------------------------------
-
- You must complete this form and send it to Faximum Software in order to
- register your product and obtain the activation key necessary to install
- the software.
-
- FAX to: 1 (604) 926-8182
- E-Mail to: support@faximum.com
-
- Your Name & Title:
-
- Company Name:
-
- Mailing Address:
-
- City, State, and Code:
-
- Phone Number:
-
- Fax Number:
-
- How did you learn about Faximum?
-
- From whom did you purchase this product?
-
- Faximum Serial Number:
-
- Faximum Release Number (from media):
-
- UNIX Operating System Supplier and Release:
-
- Computer System Manufacturer and Model:
-
- Computer Systems Hardware ID:
- (i.e. output from the sysdef -h command)
-
- Fax Modem Manufacturer and Model:
-
- Multi-Port Card Manufacturer and Model:
-
- What media type do you prefer for updates?
- (i.e. 5.25" or 3.5" floppy, 4mm DAT, 8mm tape, cartridge tape):
-
- Can you obtain updates by anonymous FTP? (Yes/No)
-
- Can you obtain updated by anonymous UUCP? (Yes/No)
-
- What is your Internet e-mail address (if you have one):
-
- Comments and Suggestions:
-
-
-
- I have read the software license form and agree to its terms
- and conditions. (Please add your name and the date.)
-
- Name:
- Date:
-
- ==============================================================================
-