home *** CD-ROM | disk | FTP | other *** search
- Fri May 14 15:15:50 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
- * mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define.
- ("bc2t"): Correct typo.
- ("[ls]wc[023]"): Use T rather than t.
- ("c[0123]"): Define general coprocessor instructions.
-
- Mon May 10 06:02:25 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
-
- * m68k.h: Move split point for gcc compilation more towards
- middle.
-
- Fri Apr 9 13:26:16 1993 Jim Kingdon (kingdon@cygnus.com)
-
- * rs6k.h: Clean up instructions for primary opcode 19 (many were
- simply wrong, ics, rfi, & rfsvc were missing).
- Add "a" to opr_ext for "bb". Doc fix.
-
- Thu Mar 18 13:45:31 1993 Per Bothner (bothner@rtl.cygnus.com)
-
- * i386.h: 486 extensions from John Hassey (hassey@dg-rtp.dg.com).
- * mips.h: Add casts, to suppress warnings about shifting too much.
- * m68k.h: Document the placement code '9'.
-
- Thu Feb 18 02:03:14 1993 John Gilmore (gnu@cygnus.com)
-
- * m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART): Add kludge which
- allows callers to break up the large initialized struct full of
- opcodes into two half-sized ones. This permits GCC to compile
- this module, since it takes exponential space for initializers.
- (numopcodes, endop): Revise to use AND_OTHER_PART in size calcs.
-
- Thu Feb 4 02:06:56 1993 John Gilmore (gnu@cygnus.com)
-
- * a29k.h: Remove RCS crud, update GPL to v2, update copyrights.
- * convex.h: Added, from GDB's convx-opcode.h. Added CONST to all
- initialized structs in it.
-
- Thu Jan 28 21:32:22 1993 John Gilmore (gnu@cygnus.com)
-
- Delta 88 changes inspired by Carl Greco, <cgreco@Creighton.Edu>:
- * m88k.h (PMEM): Avoid previous definition from <sys/param.h>.
- (AND): Change to AND_ to avoid ansidecl.h `AND' conflict.
-
- Sat Jan 23 18:10:49 PST 1993 Ralph Campbell (ralphc@pyramid.com)
-
- * mips.h: document "i" and "j" operands correctly.
-
- Thu Jan 7 15:58:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
-
- * mips.h: Removed endianness dependency.
-
- Sun Jan 3 14:13:35 1993 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * h8300.h: include info on number of cycles per instruction.
-
- Mon Dec 21 21:29:08 1992 Stu Grossman (grossman at cygnus.com)
-
- * hppa.h: Move handy aliases to the front. Fix masks for extract
- and deposit instructions.
-
- Sat Dec 12 16:09:48 1992 Ian Lance Taylor (ian@cygnus.com)
-
- * i386.h: accept shld and shrd both with and without the shift
- count argument, which is always %cl.
-
- Fri Nov 27 17:13:18 1992 Ken Raeburn (raeburn at cygnus.com)
-
- * i386.h (i386_optab_end, i386_regtab_end): Now const.
- (one_byte_segment_defaults, two_byte_segment_defaults,
- i386_prefixtab_end): Ditto.
-
- Mon Nov 23 10:47:25 1992 Ken Raeburn (raeburn@cygnus.com)
-
- * vax.h (bb*): Use "v" (bitfield type), not "a" (address operand)
- for operand 2; from John Carr, jfc@dsg.dec.com.
-
- Wed Nov 4 07:36:49 1992 Ken Raeburn (raeburn@cygnus.com)
-
- * m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions
- always use 16-bit offsets. Makes calculated-size jump tables
- feasible.
-
- Fri Oct 16 22:52:43 1992 Ken Raeburn (raeburn@cygnus.com)
-
- * i386.h: Fix one-operand forms of in* and out* patterns.
-
- Tue Sep 22 14:08:14 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * m68k.h: Added CPU32 support.
-
- Tue Sep 22 00:38:41 1992 John Gilmore (gnu@cygnus.com)
-
- * mips.h (break): Disassemble the argument. Patch from
- jonathan@cs.stanford.edu (Jonathan Stone).
-
- Wed Sep 9 11:25:28 1992 Ian Lance Taylor (ian@cygnus.com)
-
- * m68k.h: merged Motorola and MIT syntax.
-
- Thu Sep 3 09:33:22 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * m68k.h (pmove): make the tests less strict, the 68k book is
- wrong.
-
- Tue Aug 25 23:25:19 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
-
- * m68k.h (m68ec030): Defined as alias for 68030.
- (m68k_opcodes): New type characters "3" for 68030 MMU regs and "t"
- for immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use
- them. Tightened description of "fmovex" to distinguish it from
- some "pmove" encodings. Added "pmove" for 68030 MMU regs, cleaned
- up descriptions that claimed versions were available for chips not
- supporting them. Added "pmovefd".
-
- Mon Aug 24 12:04:51 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * m68k.h: fix where the . goes in divull
-
- Wed Aug 19 11:22:24 1992 Ian Lance Taylor (ian@cygnus.com)
-
- * m68k.h: the cas2 instruction is supposed to be written with
- indirection on the last two operands, which can be either data or
- address registers. Added a new operand type 'r' which accepts
- either register type. Added new cases for cas2l and cas2w which
- use them. Corrected masks for cas2 which failed to recognize use
- of address register.
-
- Fri Aug 14 14:20:38 1992 Per Bothner (bothner@cygnus.com)
-
- * m68k.h: Merged in patches (mostly m68040-specific) from
- Colin Smith <colin@wrs.com>.
-
- * m68k.h: Merged m68kmri.h and m68k.h (using the former as a
- base). Also cleaned up duplicates, re-ordered instructions for
- the sake of dis-assembling (so aliases come after standard names).
- * m68kmri.h: Now just defines some macros, and #includes m68k.h.
-
- Wed Aug 12 16:38:15 1992 Steve Chamberlain (sac@thepub.cygnus.com)
-
- * m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in
- all missing .s
-
- Mon Aug 10 23:22:33 1992 Ken Raeburn (raeburn@cygnus.com)
-
- * sparc.h: Moved tables to BFD library.
-
- * i386.h (i386_optab): Add fildq, fistpq aliases used by gcc.
-
- Sun Jun 28 13:29:03 1992 Fred Fish (fnf@cygnus.com)
-
- * h8300.h: Finish filling in all the holes in the opcode table,
- so that the Lucid C compiler can digest this as well...
-
- Fri Jun 26 21:27:17 1992 John Gilmore (gnu at cygnus.com)
-
- * i386.h: Add setc, setnc, addr16, data16, repz, repnz aliases.
- Fix opcodes on various sizes of fild/fist instructions
- (16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix).
- Use tabs to indent for comments. Fixes suggested by Minh Tran-Le.
-
- Thu Jun 25 16:13:26 1992 Stu Grossman (grossman at cygnus.com)
-
- * h8300.h: Fill in all the holes in the opcode table so that the
- losing HPUX C compiler can digest this...
-
- Thu Jun 11 12:15:25 1992 John Gilmore (gnu at cygnus.com)
-
- * mips.h: Fix decoding of coprocessor instructions, somewhat.
- (Fix by Eric Anderson, 3jean@maas-neotek.arc.nasa.gov.)
-
- Thu May 28 11:17:44 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
-
- * sparc.h: Add new architecture variant sparclite; add its scan
- and divscc opcodes. Define ARCHITECTURES_CONFLICT_P macro.
-
- Tue May 5 14:23:27 1992 Per Bothner (bothner@rtl.cygnus.com)
-
- * mips.h: Add some more opcode synonyms (from Frank Yellin,
- fy@lucid.com).
-
- Thu Apr 16 18:25:26 1992 Per Bothner (bothner@cygnus.com)
-
- * rs6k.h: New version from IBM (Metin).
-
- Thu Apr 9 00:31:19 1992 Per Bothner (bothner@rtl.cygnus.com)
-
- * rs6k.h: Fix incorrect extended opcode for instructions `fm'
- and `fd'. (From metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).)
-
- Tue Apr 7 13:38:47 1992 Stu Grossman (grossman at cygnus.com)
-
- * rs6k.h: Move from ../../gdb/rs6k-opcode.h.
-
- Fri Apr 3 11:30:20 1992 Fred Fish (fnf@cygnus.com)
-
- * m68k.h (one, two): Cast macro args to unsigned to suppress
- complaints from compiler and lint about integer overflow during
- shift.
-
- Sun Mar 29 12:22:08 1992 John Gilmore (gnu at cygnus.com)
-
- * sparc.h (OP): Avoid signed overflow when shifting to high order bit.
-
- Fri Mar 6 00:22:38 1992 John Gilmore (gnu at cygnus.com)
-
- * mips.h: Make bitfield layout depend on the HOST compiler,
- not on the TARGET system.
-
- Fri Feb 21 01:29:51 1992 K. Richard Pixley (rich@cygnus.com)
-
- * i386.h: added inb, inw, outb, outw opcodes, added att syntax for
- scmp, slod, smov, ssca, ssto. Curtesy Minh Tran-Le
- <TRANLE@INTELLICORP.COM>.
-
- Thu Jan 30 07:31:44 1992 Steve Chamberlain (sac at rtl.cygnus.com)
-
- * h8300.h: turned op_type enum into #define list
-
- Thu Jan 30 01:07:24 1992 John Gilmore (gnu at cygnus.com)
-
- * sparc.h: Remove "cypress" architecture. Remove "fitox" and
- similar instructions -- they've been renamed to "fitoq", etc.
- REALLY fix tsubcctv. Fix "fcmpeq" and "fcmpq" which had wrong
- number of arguments.
- * h8300.h: Remove extra ; which produces compiler warning.
-
- Tue Jan 28 22:59:22 1992 Stu Grossman (grossman at cygnus.com)
-
- * sparc.h: fix opcode for tsubcctv.
-
- Tue Jan 7 17:19:39 1992 K. Richard Pixley (rich at cygnus.com)
-
- * sparc.h: fba and cba are now aliases for fb and cb respectively.
-
- Fri Dec 27 10:55:50 1991 Per Bothner (bothner at cygnus.com)
-
- * sparc.h (nop): Made the 'lose' field be even tighter,
- so only a standard 'nop' is disassembled as a nop.
-
- Sun Dec 22 12:18:18 1991 Michael Tiemann (tiemann at cygnus.com)
-
- * sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is
- disassembled as a nop.
-
- Tue Dec 10 00:22:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
-
- * sparc.h: fix a typo.
-
- Sat Nov 30 20:40:51 1991 Steve Chamberlain (sac at rtl.cygnus.com)
-
- * a29k.h, arm.h, h8300.h, i386.h, i860.h, i960.h , m68k.h,
- m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h,
- vax.h, ChangeLog: renamed from ../<foo>-opcode.h
-
-
-
-
-
-