home *** CD-ROM | disk | FTP | other *** search
-
- (A)NSI Color - on/off
-
- This command, when enabled, will allow color on those
- systems properly configured. There are three requirements
- for this. First, the caller must have set his communication
- parameters to 8 bits, no parity. Secondly, he must be
- running a program that supports it: Qmodem, Procomm, and
- Pibterm are three that do. (Most require that ANSI.SYS be
- installed on the home system, by putting the line
- DEVICE=ANSI.SYS in the CONFIG.SYS file.) Thirdly, of
- course, he must have a color monitor.
-