home *** CD-ROM | disk | FTP | other *** search
/ Source Code 1994 March / Source_Code_CD-ROM_Walnut_Creek_March_1994.iso / compsrcs / misc / volume31 / plotfoil / part02 < prev    next >
Encoding:
Text File  |  1992-07-13  |  40.1 KB  |  1,742 lines
  1. Newsgroups: comp.sources.misc
  2. From: sham@cs.arizona.edu ("Shamim Zvonko Mohamed")
  3. Subject:  v31i029: plotfoil - Plot curves (airfoils) using PostScript, Part02/03
  4. Message-ID: <1992Jul13.210117.8392@sparky.imd.sterling.com>
  5. X-Md4-Signature: d1f2e59f4248c6242798c9b828bed150
  6. Date: Mon, 13 Jul 1992 21:01:17 GMT
  7. Approved: kent@sparky.imd.sterling.com
  8.  
  9. Submitted-by: sham@cs.arizona.edu ("Shamim Zvonko Mohamed")
  10. Posting-number: Volume 31, Issue 29
  11. Archive-name: plotfoil/part02
  12. Environment: UNIX,VMS,DOS,SGI,Sun,PC
  13.  
  14. #! /bin/sh
  15. # This is a shell archive.  Remove anything before this line, then unpack
  16. # it by saving it into a file and typing "sh file".  To overwrite existing
  17. # files, type "sh file -c".  You can also feed this as standard input via
  18. # unshar, or by typing "sh <file", e.g..  If this archive is complete, you
  19. # will see the following message at the end:
  20. #        "End of archive 2 (of 3)."
  21. # Contents:  plotfoil plotfoil/airfoils plotfoil/airfoils/Aquila
  22. #   plotfoil/airfoils/Clark-Y plotfoil/airfoils/Clark-YH
  23. #   plotfoil/airfoils/DF-101 plotfoil/airfoils/DF-102
  24. #   plotfoil/airfoils/FX-60-100 plotfoil/airfoils/FX-63-137
  25. #   plotfoil/airfoils/HQ-2-9 plotfoil/airfoils/Hobie-SMO
  26. #   plotfoil/airfoils/J5012 plotfoil/airfoils/MB-253515
  27. #   plotfoil/airfoils/Miley plotfoil/airfoils/RG-15
  28. #   plotfoil/airfoils/Spica plotfoil/airfoils/clarkYH.bad
  29. #   plotfoil/airfoils/clarkYH.bad1 plotfoil/airfoils/clarkYH.bad2
  30. #   plotfoil/airfoils/eppler-193 plotfoil/airfoils/eppler-205
  31. #   plotfoil/airfoils/eppler-214 plotfoil/airfoils/eppler-374
  32. #   plotfoil/airfoils/eppler-387 plotfoil/airfoils/naca-winglets
  33. #   plotfoil/airfoils/naca0009 plotfoil/airfoils/naca23012
  34. #   plotfoil/airfoils/naca4412 plotfoil/airfoils/naca6409
  35. # Wrapped by sham@gilamonster on Thu Jul  9 14:53:23 1992
  36. PATH=/bin:/usr/bin:/usr/ucb ; export PATH
  37. if test ! -d 'plotfoil' ; then
  38.     echo shar: Creating directory \"'plotfoil'\"
  39.     mkdir 'plotfoil'
  40. fi
  41. if test ! -d 'plotfoil/airfoils' ; then
  42.     echo shar: Creating directory \"'plotfoil/airfoils'\"
  43.     mkdir 'plotfoil/airfoils'
  44. fi
  45. if test -f 'plotfoil/airfoils/Aquila' -a "${1}" != "-c" ; then 
  46.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/Aquila'\"
  47. else
  48. echo shar: Extracting \"'plotfoil/airfoils/Aquila'\" \(1251 characters\)
  49. sed "s/^X//" >'plotfoil/airfoils/Aquila' <<'END_OF_FILE'
  50. AQUILA 9.3% smoothed
  51. X1.00000   0.0
  52. X0.99667   0.00057
  53. X0.99333   0.00114
  54. X0.99000   0.00171
  55. X0.98667   0.00228
  56. X0.98000   0.00340
  57. X0.92667   0.01240
  58. X0.87333   0.02150
  59. X0.82000   0.03065
  60. X0.76000   0.04077
  61. X0.70667   0.04945
  62. X0.65333   0.05768
  63. X0.60000   0.06530
  64. X0.54667   0.07214
  65. X0.49333   0.07799
  66. X0.44000   0.08263
  67. X0.39333   0.08551
  68. X0.34667   0.08710
  69. X0.31333   0.08735
  70. X0.27333   0.08655
  71. X0.23333   0.08438
  72. X0.19333   0.08055
  73. X0.16000   0.07577
  74. X0.12667   0.06914
  75. X0.09333   0.06012
  76. X0.06000   0.04786
  77. X0.04667   0.04171
  78. X0.03333   0.03454
  79. X0.02667   0.03045
  80. X0.02000   0.02587
  81. X0.01333   0.02052
  82. X0.01000   0.01739
  83. X0.00667   0.01377
  84. X0.00333   0.00929
  85. X0.0       0.0
  86. X0.00333  -0.00572
  87. X0.00667  -0.00725
  88. X0.01000  -0.00810
  89. X0.01333  -0.00862
  90. X0.02000  -0.00917
  91. X0.02667  -0.00940
  92. X0.03333  -0.00947
  93. X0.04667  -0.00939
  94. X0.06000  -0.00920
  95. X0.09333  -0.00866
  96. X0.12667  -0.00821
  97. X0.16000  -0.00787
  98. X0.19333  -0.00758
  99. X0.23333  -0.00724
  100. X0.27333  -0.00688
  101. X0.31333  -0.00650
  102. X0.34667  -0.00618
  103. X0.39333  -0.00574
  104. X0.44000  -0.00530
  105. X0.49333  -0.00480
  106. X0.54667  -0.00430
  107. X0.60000  -0.00380
  108. X0.65333  -0.00330
  109. X0.70667  -0.00279
  110. X0.76000  -0.00229
  111. X0.82000  -0.00173
  112. X0.87333  -0.00122
  113. X0.92667  -0.00070
  114. X0.98000  -0.00019
  115. X0.98667  -0.00013
  116. X0.99000  -0.00009
  117. X0.99333  -0.00006
  118. X0.99667  -0.00003
  119. X1.00000   0.0
  120. END_OF_FILE
  121. if test 1251 -ne `wc -c <'plotfoil/airfoils/Aquila'`; then
  122.     echo shar: \"'plotfoil/airfoils/Aquila'\" unpacked with wrong size!
  123. fi
  124. # end of 'plotfoil/airfoils/Aquila'
  125. fi
  126. if test -f 'plotfoil/airfoils/Clark-Y' -a "${1}" != "-c" ; then 
  127.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/Clark-Y'\"
  128. else
  129. echo shar: Extracting \"'plotfoil/airfoils/Clark-Y'\" \(1188 characters\)
  130. sed "s/^X//" >'plotfoil/airfoils/Clark-Y' <<'END_OF_FILE'
  131. CLARK-Y 11.7% smoothed
  132. X1.00000  0.0
  133. X0.99572  0.00115
  134. X0.98296  0.00448
  135. X0.96194  0.00972
  136. X0.93301  0.01656
  137. X0.89668  0.02475
  138. X0.85355  0.03400
  139. X0.80438  0.04394
  140. X0.75000  0.05412
  141. X0.69134  0.06405
  142. X0.62941  0.07319
  143. X0.56526  0.08105
  144. X0.50000  0.08719
  145. X0.43474  0.09128
  146. X0.37059  0.09312
  147. X0.33928  0.09318
  148. X0.30866  0.09266
  149. X0.27886  0.09158
  150. X0.25000  0.08996
  151. X0.22221  0.08774
  152. X0.19562  0.08483
  153. X0.17033  0.08113
  154. X0.14645  0.07660
  155. X0.12408  0.07134
  156. X0.10332  0.06552
  157. X0.08427  0.05939
  158. X0.06699  0.05313
  159. X0.05156  0.04677
  160. X0.03806  0.04027
  161. X0.02653  0.03352
  162. X0.01704  0.02652
  163. X0.00961  0.01943
  164. X0.00428  0.01254
  165. X0.00107  0.00616
  166. X0.0      0.00047
  167. X0.00107 -0.00453
  168. X0.00428 -0.00898
  169. X0.00961 -0.01296
  170. X0.01704 -0.01651
  171. X0.02653 -0.01959
  172. X0.03806 -0.02214
  173. X0.05156 -0.02414
  174. X0.06699 -0.02567
  175. X0.08427 -0.02680
  176. X0.10332 -0.02763
  177. X0.12408 -0.02816
  178. X0.14645 -0.02839
  179. X0.17033 -0.02832
  180. X0.19562 -0.02795
  181. X0.22221 -0.02734
  182. X0.25000 -0.02653
  183. X0.27886 -0.02559
  184. X0.30866 -0.02458
  185. X0.33928 -0.02351
  186. X0.37059 -0.02242
  187. X0.43474 -0.02018
  188. X0.50000 -0.01792
  189. X0.56526 -0.01566
  190. X0.62941 -0.01345
  191. X0.69134 -0.01131
  192. X0.75000 -0.00928
  193. X0.80438 -0.00741
  194. X0.85355 -0.00575
  195. X0.89668 -0.00429
  196. X0.93301 -0.00302
  197. X0.96194 -0.00190
  198. X0.98296 -0.00094
  199. X0.99572 -0.00025
  200. X1.00000  0.0
  201. END_OF_FILE
  202. if test 1188 -ne `wc -c <'plotfoil/airfoils/Clark-Y'`; then
  203.     echo shar: \"'plotfoil/airfoils/Clark-Y'\" unpacked with wrong size!
  204. fi
  205. # end of 'plotfoil/airfoils/Clark-Y'
  206. fi
  207. if test -f 'plotfoil/airfoils/Clark-YH' -a "${1}" != "-c" ; then 
  208.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/Clark-YH'\"
  209. else
  210. echo shar: Extracting \"'plotfoil/airfoils/Clark-YH'\" \(368 characters\)
  211. sed "s/^X//" >'plotfoil/airfoils/Clark-YH' <<'END_OF_FILE'
  212. X2 Clark YH
  213. X0.0000 0.0350 0.0350
  214. X0.0125 0.0545 0.0193
  215. X0.0250 0.0650 0.0147
  216. X0.0500 0.0790 0.0093
  217. X0.0750 0.0885 0.0063
  218. X0.1000 0.0960 0.0042
  219. X0.1500 0.1068 0.0015
  220. X0.2000 0.1136 0.0003
  221. X0.3000 0.1170 0.0000
  222. X0.4000 0.1140 0.0000
  223. X0.5000 0.1051 0.0000
  224. X0.6000 0.0915 0.0000
  225. X0.7000 0.0742 0.0006
  226. X0.8000 0.0562 0.0038
  227. X0.9000 0.0384 0.0102
  228. X0.9500 0.0293 0.0140
  229. X1.0000 0.0185 0.0185
  230. END_OF_FILE
  231. if test 368 -ne `wc -c <'plotfoil/airfoils/Clark-YH'`; then
  232.     echo shar: \"'plotfoil/airfoils/Clark-YH'\" unpacked with wrong size!
  233. fi
  234. # end of 'plotfoil/airfoils/Clark-YH'
  235. fi
  236. if test -f 'plotfoil/airfoils/DF-101' -a "${1}" != "-c" ; then 
  237.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/DF-101'\"
  238. else
  239. echo shar: Extracting \"'plotfoil/airfoils/DF-101'\" \(1044 characters\)
  240. sed "s/^X//" >'plotfoil/airfoils/DF-101' <<'END_OF_FILE'
  241. DF101
  242. X1.00000  0.00000
  243. X0.99680  0.00043
  244. X0.98727  0.00187
  245. X0.97163  0.00435
  246. X0.95030  0.00793
  247. X0.92375  0.01258
  248. X0.89245  0.01818
  249. X0.85697  0.02450
  250. X0.81783  0.03123
  251. X0.77558  0.03809
  252. X0.73072  0.04484
  253. X0.68375  0.05129
  254. X0.63525  0.05731
  255. X0.58567  0.06279
  256. X0.53552  0.06757
  257. X0.48520  0.07149
  258. X0.43513  0.07436
  259. X0.38578  0.07605
  260. X0.33765  0.07652
  261. X0.29125  0.07580
  262. X0.24708  0.07397
  263. X0.20557  0.07109
  264. X0.16715  0.06717
  265. X0.13208  0.06211
  266. X0.10063  0.05581
  267. X0.07308  0.04827
  268. X0.04975  0.03970
  269. X0.03082  0.03046
  270. X0.01637  0.02109
  271. X0.00647  0.01226
  272. X0.00107  0.00454
  273. X-0.00010 -0.00089
  274. X0.00478 -0.00767
  275. X0.01512 -0.01350
  276. X0.02987 -0.01893
  277. X0.04877 -0.02398
  278. X0.07192 -0.02849
  279. X0.09940 -0.03216
  280. X0.13128 -0.03475
  281. X0.16755 -0.03611
  282. X0.20782 -0.03629
  283. X0.25158 -0.03547
  284. X0.29833 -0.03397
  285. X0.34758 -0.03205
  286. X0.39883 -0.02988
  287. X0.45162 -0.02751
  288. X0.50533 -0.02496
  289. X0.55933 -0.02226
  290. X0.61295 -0.01953
  291. X0.66543 -0.01689
  292. X0.71618 -0.01444
  293. X0.76453 -0.01218
  294. X0.80990 -0.01004
  295. X0.85165 -0.00793
  296. X0.88918 -0.00585
  297. X0.92195 -0.00391
  298. X0.94943 -0.00229
  299. X0.97128 -0.00114
  300. X0.98715 -0.00046
  301. X0.99677 -0.00015
  302. X1.00002 -0.00007
  303. END_OF_FILE
  304. if test 1044 -ne `wc -c <'plotfoil/airfoils/DF-101'`; then
  305.     echo shar: \"'plotfoil/airfoils/DF-101'\" unpacked with wrong size!
  306. fi
  307. # end of 'plotfoil/airfoils/DF-101'
  308. fi
  309. if test -f 'plotfoil/airfoils/DF-102' -a "${1}" != "-c" ; then 
  310.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/DF-102'\"
  311. else
  312. echo shar: Extracting \"'plotfoil/airfoils/DF-102'\" \(1043 characters\)
  313. sed "s/^X//" >'plotfoil/airfoils/DF-102' <<'END_OF_FILE'
  314. DF102
  315. X1.00000  0.00000
  316. X0.99680  0.00043
  317. X0.98727  0.00187
  318. X0.97164  0.00435
  319. X0.95030  0.00793
  320. X0.92376  0.01258
  321. X0.89246  0.01818
  322. X0.85698  0.02450
  323. X0.81785  0.03123
  324. X0.77561  0.03809
  325. X0.73074  0.04484
  326. X0.68378  0.05129
  327. X0.63529  0.05731
  328. X0.58571  0.06279
  329. X0.53556  0.06757
  330. X0.48525  0.07149
  331. X0.43519  0.07436
  332. X0.38584  0.07605
  333. X0.33772  0.07652
  334. X0.29132  0.07580
  335. X0.24716  0.07397
  336. X0.20565  0.07144
  337. X0.16723  0.06830
  338. X0.13217  0.06431
  339. X0.10072  0.05920
  340. X0.07318  0.05270
  341. X0.04985  0.04470
  342. X0.03091  0.03506
  343. X0.01647  0.02449
  344. X0.00657  0.01426
  345. X0.00117  0.00554
  346. X0.00000 -0.00089
  347. X0.00488 -0.00767
  348. X0.01522 -0.01350
  349. X0.02996 -0.01893
  350. X0.04886 -0.02398
  351. X0.07201 -0.02849
  352. X0.09949 -0.03216
  353. X0.13137 -0.03475
  354. X0.16763 -0.03611
  355. X0.20790 -0.03629
  356. X0.25166 -0.03547
  357. X0.29840 -0.03397
  358. X0.34765 -0.03205
  359. X0.39889 -0.02988
  360. X0.45167 -0.02751
  361. X0.50538 -0.02496
  362. X0.55938 -0.02226
  363. X0.61299 -0.01953
  364. X0.66547 -0.01689
  365. X0.71621 -0.01444
  366. X0.76456 -0.01218
  367. X0.80992 -0.01004
  368. X0.85166 -0.00793
  369. X0.88919 -0.00585
  370. X0.92196 -0.00391
  371. X0.94944 -0.00229
  372. X0.97129 -0.00114
  373. X0.98715 -0.00046
  374. X0.99677 -0.00015
  375. X1.00000 -0.00007
  376. END_OF_FILE
  377. if test 1043 -ne `wc -c <'plotfoil/airfoils/DF-102'`; then
  378.     echo shar: \"'plotfoil/airfoils/DF-102'\" unpacked with wrong size!
  379. fi
  380. # end of 'plotfoil/airfoils/DF-102'
  381. fi
  382. if test -f 'plotfoil/airfoils/FX-60-100' -a "${1}" != "-c" ; then 
  383.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/FX-60-100'\"
  384. else
  385. echo shar: Extracting \"'plotfoil/airfoils/FX-60-100'\" \(1189 characters\)
  386. sed "s/^X//" >'plotfoil/airfoils/FX-60-100' <<'END_OF_FILE'
  387. XFX60-100 10.0% smoothed
  388. X1.00000  0.0
  389. X0.99572  0.00087
  390. X0.98296  0.00344
  391. X0.96194  0.00765
  392. X0.93301  0.01342
  393. X0.89668  0.02056
  394. X0.85355  0.02875
  395. X0.80438  0.03754
  396. X0.75000  0.04643
  397. X0.69134  0.05491
  398. X0.62941  0.06255
  399. X0.56526  0.06902
  400. X0.50000  0.07402
  401. X0.43474  0.07735
  402. X0.37059  0.07880
  403. X0.33928  0.07876
  404. X0.30866  0.07819
  405. X0.27886  0.07708
  406. X0.25000  0.07543
  407. X0.22221  0.07326
  408. X0.19562  0.07059
  409. X0.17033  0.06743
  410. X0.14645  0.06383
  411. X0.12408  0.05982
  412. X0.10332  0.05545
  413. X0.08427  0.05078
  414. X0.06699  0.04584
  415. X0.05156  0.04064
  416. X0.03806  0.03517
  417. X0.02653  0.02937
  418. X0.01704  0.02331
  419. X0.00961  0.01715
  420. X0.00428  0.01123
  421. X0.00107  0.00589
  422. X0.0      0.00142
  423. X0.00107 -0.00216
  424. X0.00428 -0.00503
  425. X0.00961 -0.00751
  426. X0.01704 -0.00991
  427. X0.02653 -0.01235
  428. X0.03806 -0.01482
  429. X0.05156 -0.01719
  430. X0.06699 -0.01933
  431. X0.08427 -0.02115
  432. X0.10332 -0.02265
  433. X0.12408 -0.02381
  434. X0.14645 -0.02464
  435. X0.17033 -0.02510
  436. X0.19562 -0.02518
  437. X0.22221 -0.02483
  438. X0.25000 -0.02402
  439. X0.27886 -0.02273
  440. X0.30866 -0.02096
  441. X0.33928 -0.01874
  442. X0.37059 -0.01617
  443. X0.43474 -0.01029
  444. X0.50000 -0.00404
  445. X0.56526  0.00192
  446. X0.62941  0.00702
  447. X0.69134  0.01081
  448. X0.75000  0.01305
  449. X0.80438  0.01367
  450. X0.85355  0.01281
  451. X0.89668  0.01080
  452. X0.93301  0.00808
  453. X0.96194  0.00514
  454. X0.98296  0.00250
  455. X0.99572  0.00066
  456. X1.00000  0.0
  457. END_OF_FILE
  458. if test 1189 -ne `wc -c <'plotfoil/airfoils/FX-60-100'`; then
  459.     echo shar: \"'plotfoil/airfoils/FX-60-100'\" unpacked with wrong size!
  460. fi
  461. # end of 'plotfoil/airfoils/FX-60-100'
  462. fi
  463. if test -f 'plotfoil/airfoils/FX-63-137' -a "${1}" != "-c" ; then 
  464.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/FX-63-137'\"
  465. else
  466. echo shar: Extracting \"'plotfoil/airfoils/FX-63-137'\" \(1336 characters\)
  467. sed "s/^X//" >'plotfoil/airfoils/FX-63-137' <<'END_OF_FILE'
  468. XFX 63-137 13.7% smoothed
  469. X1.000000  0.000000
  470. X0.995720  0.002261
  471. X0.982960  0.008222
  472. X0.961940  0.016421
  473. X0.933010  0.025814
  474. X0.896680  0.036153
  475. X0.853550  0.047568
  476. X0.804380  0.060006
  477. X0.750000  0.073047
  478. X0.691340  0.085959
  479. X0.629410  0.097879
  480. X0.565260  0.107990
  481. X0.500000  0.115624
  482. X0.434740  0.120314
  483. X0.370590  0.121797
  484. X0.339280  0.121303
  485. X0.308660  0.119983
  486. X0.278860  0.117849
  487. X0.250000  0.114919
  488. X0.222210  0.111224
  489. X0.195620  0.106801
  490. X0.170330  0.101685
  491. X0.146450  0.095912
  492. X0.124080  0.089547
  493. X0.103320  0.082700
  494. X0.084270  0.075518
  495. X0.066990  0.068116
  496. X0.051560  0.060520
  497. X0.038060  0.052636
  498. X0.026530  0.044302
  499. X0.017040  0.035484
  500. X0.009610  0.026362
  501. X0.004280  0.017421
  502. X0.001070  0.009265
  503. X0.000000  0.002411
  504. X0.001070  -.002958
  505. X0.004280  -.007021
  506. X0.009610  -.010156
  507. X0.017040  -.012751
  508. X0.026530  -.015034
  509. X0.038060  -.017064
  510. X0.051560  -.018791
  511. X0.066990  -.020178
  512. X0.084270  -.021230
  513. X0.103320  -.021987
  514. X0.124080  -.022482
  515. X0.146450  -.022718
  516. X0.170330  -.022668
  517. X0.195620  -.022297
  518. X0.222210  -.021567
  519. X0.250000  -.020431
  520. X0.278860  -.018838
  521. X0.308660  -.016752
  522. X0.339280  -.014179
  523. X0.370590  -.011176
  524. X0.434740  -.004210
  525. X0.500000  0.003409
  526. X0.565260  0.010919
  527. X0.629410  0.017605
  528. X0.691340  0.022871
  529. X0.750000  0.026291
  530. X0.804380  0.027582
  531. X0.853550  0.026608
  532. X0.896680  0.023429
  533. X0.933010  0.018408
  534. X0.961940  0.012286
  535. X0.982960  0.006230
  536. X0.995720  0.001696
  537. X1.000000  0.000000
  538. END_OF_FILE
  539. if test 1336 -ne `wc -c <'plotfoil/airfoils/FX-63-137'`; then
  540.     echo shar: \"'plotfoil/airfoils/FX-63-137'\" unpacked with wrong size!
  541. fi
  542. # end of 'plotfoil/airfoils/FX-63-137'
  543. fi
  544. if test -f 'plotfoil/airfoils/HQ-2-9' -a "${1}" != "-c" ; then 
  545.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/HQ-2-9'\"
  546. else
  547. echo shar: Extracting \"'plotfoil/airfoils/HQ-2-9'\" \(677 characters\)
  548. sed "s/^X//" >'plotfoil/airfoils/HQ-2-9' <<'END_OF_FILE'
  549. HQ-2.0/9  9.0%   smoothed
  550. X1.00000  0.0
  551. X0.95000  0.00710
  552. X0.90000  0.01490
  553. X0.85000  0.02230
  554. X0.80000  0.02950
  555. X0.70000  0.04280
  556. X0.60000  0.05360
  557. X0.50000  0.06060
  558. X0.40000  0.06370
  559. X0.35000  0.06390
  560. X0.30000  0.06300
  561. X0.25000  0.06090
  562. X0.20000  0.05760
  563. X0.15000  0.05240
  564. X0.10000  0.04450
  565. X0.05000  0.03190
  566. X0.02500  0.02240
  567. X0.01250  0.01560
  568. X0.00500  0.00950
  569. X0.0      0.0
  570. X0.00500 -0.00510
  571. X0.01250 -0.00870
  572. X0.02500 -0.01220
  573. X0.05000 -0.01630
  574. X0.10000 -0.02070
  575. X0.15000 -0.02320
  576. X0.20000 -0.02480
  577. X0.25000 -0.02570
  578. X0.30000 -0.02610
  579. X0.35000 -0.02580
  580. X0.40000 -0.02480
  581. X0.50000 -0.02080
  582. X0.60000 -0.01490
  583. X0.70000 -0.00760
  584. X0.80000 -0.00170
  585. X0.85000  0.00010
  586. X0.90000  0.00110
  587. X0.95000  0.00110
  588. X1.00000  0.0
  589. END_OF_FILE
  590. if test 677 -ne `wc -c <'plotfoil/airfoils/HQ-2-9'`; then
  591.     echo shar: \"'plotfoil/airfoils/HQ-2-9'\" unpacked with wrong size!
  592. fi
  593. # end of 'plotfoil/airfoils/HQ-2-9'
  594. fi
  595. if test -f 'plotfoil/airfoils/Hobie-SMO' -a "${1}" != "-c" ; then 
  596.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/Hobie-SMO'\"
  597. else
  598. echo shar: Extracting \"'plotfoil/airfoils/Hobie-SMO'\" \(1208 characters\)
  599. sed "s/^X//" >'plotfoil/airfoils/Hobie-SMO' <<'END_OF_FILE'
  600. Hobie SMO1
  601. X1.000000  0.000000
  602. X0.990000  0.002053
  603. X0.980000  0.004078
  604. X0.960000  0.007974
  605. X0.940000  0.011659
  606. X0.920000  0.015198
  607. X0.900000  0.018669
  608. X0.850000  0.027245
  609. X0.800000  0.035700
  610. X0.750000  0.043857
  611. X0.700000  0.051475
  612. X0.650000  0.058338
  613. X0.600000  0.064316
  614. X0.550000  0.069370
  615. X0.500000  0.073500
  616. X0.450000  0.076653
  617. X0.400000  0.078665
  618. X0.350000  0.079310
  619. X0.300000  0.078344
  620. X0.250000  0.075513
  621. X0.200000  0.070502
  622. X0.150000  0.062804
  623. X0.100000  0.051441
  624. X0.087500  0.047813
  625. X0.075000  0.043774
  626. X0.062500  0.039263
  627. X0.050000  0.034268
  628. X0.037500  0.028799
  629. X0.025000  0.022800
  630. X0.012500  0.015881
  631. X0.006200  0.011507
  632. X0.000000  0.002521
  633. X0.006200 -0.005129
  634. X0.012500 -0.008062
  635. X0.025000 -0.011871
  636. X0.037500 -0.014436
  637. X0.050000 -0.016200
  638. X0.062500 -0.017315
  639. X0.075000 -0.017900
  640. X0.087500 -0.018107
  641. X0.100000 -0.018073
  642. X0.150000 -0.016552
  643. X0.200000 -0.013729
  644. X0.250000 -0.010230
  645. X0.300000 -0.006493
  646. X0.350000 -0.002879
  647. X0.400000  0.000342
  648. X0.450000  0.003034
  649. X0.500000  0.005186
  650. X0.550000  0.006847
  651. X0.600000  0.008054
  652. X0.650000  0.008802
  653. X0.700000  0.009060
  654. X0.750000  0.008800
  655. X0.800000  0.008008
  656. X0.850000  0.006681
  657. X0.900000  0.004839
  658. X0.920000  0.003970
  659. X0.940000  0.003037
  660. X0.960000  0.002050
  661. X0.980000  0.001026
  662. X0.990000  0.000510
  663. X1.000000  0.000000
  664. END_OF_FILE
  665. if test 1208 -ne `wc -c <'plotfoil/airfoils/Hobie-SMO'`; then
  666.     echo shar: \"'plotfoil/airfoils/Hobie-SMO'\" unpacked with wrong size!
  667. fi
  668. # end of 'plotfoil/airfoils/Hobie-SMO'
  669. fi
  670. if test -f 'plotfoil/airfoils/J5012' -a "${1}" != "-c" ; then 
  671.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/J5012'\"
  672. else
  673. echo shar: Extracting \"'plotfoil/airfoils/J5012'\" \(1110 characters\)
  674. sed "s/^X//" >'plotfoil/airfoils/J5012' <<'END_OF_FILE'
  675. J5012   12%
  676. X1.00000   0.00000
  677. X0.99726   0.00043
  678. X0.98907   0.00169
  679. X0.97553   0.00377
  680. X0.95677   0.00659
  681. X0.93301   0.01009
  682. X0.90451   0.01416
  683. X0.87157   0.01870
  684. X0.83457   0.02357
  685. X0.79389   0.02864
  686. X0.75000   0.03377
  687. X0.70337   0.03880
  688. X0.65451   0.04359
  689. X0.60396   0.04800
  690. X0.55226   0.05189
  691. X0.50000   0.05514
  692. X0.44774   0.05763
  693. X0.39604   0.05928
  694. X0.34549   0.06000
  695. X0.29663   0.05975
  696. X0.25000   0.05849
  697. X0.20611   0.05621
  698. X0.16544   0.05294
  699. X0.12843   0.04871
  700. X0.09549   0.04359
  701. X0.06699   0.03766
  702. X0.04323   0.03102
  703. X0.02447   0.02380
  704. X0.01093   0.01612
  705. X0.00274   0.00814
  706. X0.00000   0.00000
  707. X0.00274  -0.00814
  708. X0.01093  -0.01612
  709. X0.02447  -0.02380
  710. X0.04323  -0.03102
  711. X0.06699  -0.03766
  712. X0.09549  -0.04359
  713. X0.12843  -0.04871
  714. X0.16543  -0.05294
  715. X0.20611  -0.05621
  716. X0.25000  -0.05849
  717. X0.29663  -0.05975
  718. X0.34549  -0.06000
  719. X0.39604  -0.05928
  720. X0.44774  -0.05763
  721. X0.50000  -0.05514
  722. X0.55226  -0.05189
  723. X0.60396  -0.04800
  724. X0.65451  -0.04359
  725. X0.70337  -0.03880
  726. X0.75000  -0.03377
  727. X0.79389  -0.02864
  728. X0.83456  -0.02357
  729. X0.87157  -0.01870
  730. X0.90451  -0.01416
  731. X0.93301  -0.01009
  732. X0.95677  -0.00659
  733. X0.97553  -0.00377
  734. X0.98907  -0.00169
  735. X0.99726  -0.00043
  736. X1.00000   0.00000
  737. END_OF_FILE
  738. if test 1110 -ne `wc -c <'plotfoil/airfoils/J5012'`; then
  739.     echo shar: \"'plotfoil/airfoils/J5012'\" unpacked with wrong size!
  740. fi
  741. # end of 'plotfoil/airfoils/J5012'
  742. fi
  743. if test -f 'plotfoil/airfoils/MB-253515' -a "${1}" != "-c" ; then 
  744.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/MB-253515'\"
  745. else
  746. echo shar: Extracting \"'plotfoil/airfoils/MB-253515'\" \(1155 characters\)
  747. sed "s/^X//" >'plotfoil/airfoils/MB-253515' <<'END_OF_FILE'
  748. MB253515 15.0% smoothed
  749. X1.00000  0.0
  750. X0.95000  0.01032
  751. X0.90000  0.02033
  752. X0.85000  0.03052
  753. X0.80000  0.04079
  754. X0.75000  0.05095
  755. X0.70000  0.06078
  756. X0.65000  0.07005
  757. X0.60000  0.07849
  758. X0.55000  0.08582
  759. X0.50000  0.09174
  760. X0.45000  0.09602
  761. X0.42500  0.09748
  762. X0.40000  0.09847
  763. X0.37500  0.09898
  764. X0.35000  0.09904
  765. X0.32500  0.09868
  766. X0.30000  0.09788
  767. X0.27500  0.09660
  768. X0.25000  0.09473
  769. X0.22500  0.09211
  770. X0.20000  0.08861
  771. X0.17500  0.08410
  772. X0.15000  0.07844
  773. X0.12500  0.07146
  774. X0.10000  0.06296
  775. X0.08750  0.05807
  776. X0.07500  0.05274
  777. X0.06250  0.04696
  778. X0.05000  0.04072
  779. X0.03750  0.03393
  780. X0.02500  0.02636
  781. X0.01000  0.01521
  782. X0.0     -0.00041
  783. X0.01000 -0.01223
  784. X0.02500 -0.01809
  785. X0.03750 -0.02159
  786. X0.05000 -0.02461
  787. X0.06250 -0.02739
  788. X0.07500 -0.03001
  789. X0.08750 -0.03246
  790. X0.10000 -0.03472
  791. X0.12500 -0.03861
  792. X0.15000 -0.04175
  793. X0.17500 -0.04425
  794. X0.20000 -0.04622
  795. X0.22500 -0.04776
  796. X0.25000 -0.04892
  797. X0.27500 -0.04974
  798. X0.30000 -0.05026
  799. X0.32500 -0.05052
  800. X0.35000 -0.05054
  801. X0.37500 -0.05035
  802. X0.40000 -0.04997
  803. X0.42500 -0.04941
  804. X0.45000 -0.04866
  805. X0.50000 -0.04660
  806. X0.55000 -0.04383
  807. X0.60000 -0.04036
  808. X0.65000 -0.03628
  809. X0.70000 -0.03169
  810. X0.75000 -0.02669
  811. X0.80000 -0.02144
  812. X0.85000 -0.01606
  813. X0.90000 -0.01070
  814. X0.95000 -0.00544
  815. X1.00000  0.0
  816. END_OF_FILE
  817. if test 1155 -ne `wc -c <'plotfoil/airfoils/MB-253515'`; then
  818.     echo shar: \"'plotfoil/airfoils/MB-253515'\" unpacked with wrong size!
  819. fi
  820. # end of 'plotfoil/airfoils/MB-253515'
  821. fi
  822. if test -f 'plotfoil/airfoils/Miley' -a "${1}" != "-c" ; then 
  823.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/Miley'\"
  824. else
  825. echo shar: Extracting \"'plotfoil/airfoils/Miley'\" \(1105 characters\)
  826. sed "s/^X//" >'plotfoil/airfoils/Miley' <<'END_OF_FILE'
  827. MILEY M06-13-128
  828. X1.00000  0.00000
  829. X0.99896  0.00015
  830. X0.99152  0.00088
  831. X0.97756  0.00198
  832. X0.95718  0.00370
  833. X0.93068  0.00631
  834. X0.89849  0.01002
  835. X0.86112  0.01499
  836. X0.81923  0.02139
  837. X0.77354  0.02930
  838. X0.72493  0.03878
  839. X0.67434  0.04980
  840. X0.62288  0.06225
  841. X0.57180  0.07584
  842. X0.52265  0.09002
  843. X0.47756  0.10309
  844. X0.43510  0.11094
  845. X0.39263  0.11489
  846. X0.35032  0.11617
  847. X0.30873  0.11531
  848. X0.26838  0.11256
  849. X0.22975  0.10814
  850. X0.19328  0.10220
  851. X0.15942  0.09487
  852. X0.12857  0.08605
  853. X0.10057  0.07583
  854. X0.07558  0.06460
  855. X0.05382  0.05305
  856. X0.03551  0.04122
  857. X0.02083  0.02960
  858. X0.00994  0.01862
  859. X0.00296  0.00878
  860. X0.00098  0.00452
  861. X0.00005  0.00087
  862. X0.00030  -.00183
  863. X0.00233  -.00372
  864. X0.01203  -.00669
  865. X0.02803  -.00901
  866. X0.04987  -.01077
  867. X0.07718  -.01203
  868. X0.10959  -.01287
  869. X0.14667  -.01333
  870. X0.18796  -.01349
  871. X0.23296  -.01339
  872. X0.28111  -.01308
  873. X0.33185  -.01260
  874. X0.38456  -.01200
  875. X0.43862  -.01129
  876. X0.49338  -.01053
  877. X0.54820  -.00972
  878. X0.60242  -.00890
  879. X0.65541  -.00809
  880. X0.70652  -.00729
  881. X0.75516  -.00652
  882. X0.80073  -.00577
  883. X0.84269  -.00506
  884. X0.88053  -.00437
  885. X0.91379  -.00370
  886. X0.94205  -.00302
  887. X0.96496  -.00228
  888. X0.98232  -.00147
  889. X0.99393  -.00073
  890. X0.99942  -.00014
  891. X1.00000  0.00000
  892. END_OF_FILE
  893. if test 1105 -ne `wc -c <'plotfoil/airfoils/Miley'`; then
  894.     echo shar: \"'plotfoil/airfoils/Miley'\" unpacked with wrong size!
  895. fi
  896. # end of 'plotfoil/airfoils/Miley'
  897. fi
  898. if test -f 'plotfoil/airfoils/RG-15' -a "${1}" != "-c" ; then 
  899.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/RG-15'\"
  900. else
  901. echo shar: Extracting \"'plotfoil/airfoils/RG-15'\" \(1053 characters\)
  902. sed "s/^X//" >'plotfoil/airfoils/RG-15' <<'END_OF_FILE'
  903. RG-15 8.9%
  904. X1.00000  0.0
  905. X0.99671  0.00054
  906. X0.98726  0.00229
  907. X0.97237  0.00514
  908. X0.95248  0.00865
  909. X0.92764  0.01254
  910. X0.89810  0.01685
  911. X0.86427  0.02152
  912. X0.82660  0.02644
  913. X0.78557  0.03149
  914. X0.74165  0.03654
  915. X0.69537  0.04146
  916. X0.64723  0.04612
  917. X0.59778  0.05039
  918. X0.54753  0.05414
  919. X0.49702  0.05727
  920. X0.44676  0.05966
  921. X0.39727  0.06123
  922. X0.34902  0.06190
  923. X0.30248  0.06162
  924. X0.25809  0.06036
  925. X0.21624  0.05810
  926. X0.17730  0.05486
  927. X0.14161  0.05068
  928. X0.10945  0.04564
  929. X0.08108  0.03985
  930. X0.05673  0.03343
  931. X0.03658  0.02654
  932. X0.02076  0.01935
  933. X0.00932  0.01214
  934. X0.00235  0.00526
  935. X0.0      0.0
  936. X0.00002 -0.00048
  937. X0.00336 -0.00534
  938. X0.01247 -0.01006
  939. X0.02670 -0.01436
  940. X0.04596 -0.01811
  941. X0.07010 -0.02123
  942. X0.09896 -0.02372
  943. X0.13224 -0.02559
  944. X0.16963 -0.02688
  945. X0.21073 -0.02762
  946. X0.25509 -0.02785
  947. X0.30221 -0.02762
  948. X0.35156 -0.02696
  949. X0.40257 -0.02590
  950. X0.45463 -0.02446
  951. X0.50713 -0.02262
  952. X0.55944 -0.02025
  953. X0.61128 -0.01717
  954. X0.66244 -0.01366
  955. X0.71237 -0.01015
  956. X0.76037 -0.00691
  957. X0.80575 -0.00413
  958. X0.84779 -0.00192
  959. X0.88583 -0.00034
  960. X0.91925  0.00062
  961. X0.94748  0.00101
  962. X0.97003  0.00097
  963. X0.98652  0.00064
  964. X0.99660  0.00021
  965. X1.00000  0.0
  966. END_OF_FILE
  967. if test 1053 -ne `wc -c <'plotfoil/airfoils/RG-15'`; then
  968.     echo shar: \"'plotfoil/airfoils/RG-15'\" unpacked with wrong size!
  969. fi
  970. # end of 'plotfoil/airfoils/RG-15'
  971. fi
  972. if test -f 'plotfoil/airfoils/Spica' -a "${1}" != "-c" ; then 
  973.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/Spica'\"
  974. else
  975. echo shar: Extracting \"'plotfoil/airfoils/Spica'\" \(844 characters\)
  976. sed "s/^X//" >'plotfoil/airfoils/Spica' <<'END_OF_FILE'
  977. SPICA  11.73% smoothed
  978. X1.00000  0.0
  979. X0.95000  0.01195
  980. X0.90000  0.02270
  981. X0.85000  0.03275
  982. X0.80000  0.04260
  983. X0.75000  0.05238
  984. X0.70000  0.06190
  985. X0.65000  0.07107
  986. X0.60000  0.07970
  987. X0.55000  0.08773
  988. X0.50000  0.09490
  989. X0.45000  0.10053
  990. X0.40000  0.10415
  991. X0.35000  0.10583
  992. X0.30000  0.10530
  993. X0.25000  0.10242
  994. X0.20000  0.09690
  995. X0.15000  0.08805
  996. X0.10000  0.07400
  997. X0.08000  0.06634
  998. X0.06000  0.05704
  999. X0.04000  0.04560
  1000. X0.02000  0.03042
  1001. X0.01000  0.02053
  1002. X0.0      0.0
  1003. X0.01000 -0.01280
  1004. X0.02000 -0.01510
  1005. X0.04000 -0.01632
  1006. X0.06000 -0.01590
  1007. X0.08000 -0.01564
  1008. X0.10000 -0.01530
  1009. X0.15000 -0.01445
  1010. X0.20000 -0.01360
  1011. X0.25000 -0.01275
  1012. X0.30000 -0.01190
  1013. X0.35000 -0.01105
  1014. X0.40000 -0.01020
  1015. X0.45000 -0.00935
  1016. X0.50000 -0.00850
  1017. X0.55000 -0.00765
  1018. X0.60000 -0.00680
  1019. X0.65000 -0.00595
  1020. X0.70000 -0.00510
  1021. X0.75000 -0.00425
  1022. X0.80000 -0.00340
  1023. X0.85000 -0.00255
  1024. X0.90000 -0.00170
  1025. X0.95000 -0.00085
  1026. X1.00000  0.0
  1027. END_OF_FILE
  1028. if test 844 -ne `wc -c <'plotfoil/airfoils/Spica'`; then
  1029.     echo shar: \"'plotfoil/airfoils/Spica'\" unpacked with wrong size!
  1030. fi
  1031. # end of 'plotfoil/airfoils/Spica'
  1032. fi
  1033. if test -f 'plotfoil/airfoils/clarkYH.bad' -a "${1}" != "-c" ; then 
  1034.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/clarkYH.bad'\"
  1035. else
  1036. echo shar: Extracting \"'plotfoil/airfoils/clarkYH.bad'\" \(368 characters\)
  1037. sed "s/^X//" >'plotfoil/airfoils/clarkYH.bad' <<'END_OF_FILE'
  1038. X2 Clark YH
  1039. X0.0000 0.0350 0.0350
  1040. X0.0125 0.0545 0.0193
  1041. X0.0250 0.0650 0.0147
  1042. X0.0500 0.0790 0.0093
  1043. X0.0750 0.0885 0.0063
  1044. X0.1000 0.0960 0.0042
  1045. X0.1500 0.1068 0.0015
  1046. X0.2000 0.1136 0.0003
  1047. X0.3000 0.1170 0.0000
  1048. X0.4000 0.1140 0.0000
  1049. X0.5000 0.1051 0.0000
  1050. X0.6000 0.0915 0.0000
  1051. X0.7000 0.0742 0.0006
  1052. X0.8000 0.0562 0.0038
  1053. X0.9000 0.0384 0.0102
  1054. X0.9500 0.0293 0.0140
  1055. X1.0000 0.0185 0.0185
  1056. END_OF_FILE
  1057. if test 368 -ne `wc -c <'plotfoil/airfoils/clarkYH.bad'`; then
  1058.     echo shar: \"'plotfoil/airfoils/clarkYH.bad'\" unpacked with wrong size!
  1059. fi
  1060. # end of 'plotfoil/airfoils/clarkYH.bad'
  1061. fi
  1062. if test -f 'plotfoil/airfoils/clarkYH.bad1' -a "${1}" != "-c" ; then 
  1063.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/clarkYH.bad1'\"
  1064. else
  1065. echo shar: Extracting \"'plotfoil/airfoils/clarkYH.bad1'\" \(326 characters\)
  1066. sed "s/^X//" >'plotfoil/airfoils/clarkYH.bad1' <<'END_OF_FILE'
  1067. X2 Clark YH
  1068. X0.0000 0.0350 0.0350
  1069. X0.0125 0.0545 0.0193
  1070. X0.0250 0.0650 0.0147
  1071. X0.0500 0.0790 0.0093
  1072. X0.0750 0.0885 0.0063
  1073. X0.1000 0.0960 0.0042
  1074. X0.1500 0.1068 0.0015
  1075. X0.2000 0.1136 0.0003
  1076. X0.3000 0.1170 0.0000
  1077. X0.4000 0.1140 0.0000
  1078. X0.5000 0.1051 0.0000
  1079. X0.6000 0.0915 0.0000
  1080. X0.7000 0.0742 0.0006
  1081. X0.8000 0.0562 0.0038
  1082. X0.9000 0.0384 0.0102
  1083. END_OF_FILE
  1084. if test 326 -ne `wc -c <'plotfoil/airfoils/clarkYH.bad1'`; then
  1085.     echo shar: \"'plotfoil/airfoils/clarkYH.bad1'\" unpacked with wrong size!
  1086. fi
  1087. # end of 'plotfoil/airfoils/clarkYH.bad1'
  1088. fi
  1089. if test -f 'plotfoil/airfoils/clarkYH.bad2' -a "${1}" != "-c" ; then 
  1090.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/clarkYH.bad2'\"
  1091. else
  1092. echo shar: Extracting \"'plotfoil/airfoils/clarkYH.bad2'\" \(255 characters\)
  1093. sed "s/^X//" >'plotfoil/airfoils/clarkYH.bad2' <<'END_OF_FILE'
  1094. X2 Clark YH
  1095. X0.0000 0.0350 0.0350
  1096. X0.0125 0.0545 0.0193
  1097. X0.0250 0.0650 0.0147
  1098. X0.0500 0.0790 0.0093
  1099. X0.0750 0.0885 0.0063
  1100. X0.1000 0.0960 0.0042
  1101. X0.1500 0.1068 0.0015
  1102. X0.2000 0.1136 0.0003
  1103. X0.3000 0.1170 0.0000
  1104. X0.4000 0.1140 0.0000
  1105. X0.5000 0.1051 0.0000
  1106. X0.6000 0.091
  1107. END_OF_FILE
  1108. if test 255 -ne `wc -c <'plotfoil/airfoils/clarkYH.bad2'`; then
  1109.     echo shar: \"'plotfoil/airfoils/clarkYH.bad2'\" unpacked with wrong size!
  1110. fi
  1111. # end of 'plotfoil/airfoils/clarkYH.bad2'
  1112. fi
  1113. if test -f 'plotfoil/airfoils/eppler-193' -a "${1}" != "-c" ; then 
  1114.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/eppler-193'\"
  1115. else
  1116. echo shar: Extracting \"'plotfoil/airfoils/eppler-193'\" \(1062 characters\)
  1117. sed "s/^X//" >'plotfoil/airfoils/eppler-193' <<'END_OF_FILE'
  1118. Profil 193  Dicke 10.22%
  1119. X1.00000  0.00000
  1120. X0.99661  0.00051
  1121. X0.98674  0.00220
  1122. X0.97108  0.00522
  1123. X0.95023  0.00932
  1124. X0.92452  0.01415
  1125. X0.89414  0.01957
  1126. X0.85945  0.02558
  1127. X0.82096  0.03215
  1128. X0.77923  0.03914
  1129. X0.73484  0.04643
  1130. X0.68839  0.05382
  1131. X0.64052  0.06112
  1132. X0.59187  0.06808
  1133. X0.54306  0.07437
  1134. X0.49458  0.07955
  1135. X0.44673  0.08333
  1136. X0.39979  0.08552
  1137. X0.35403  0.08604
  1138. X0.30968  0.08488
  1139. X0.26696  0.08214
  1140. X0.22620  0.07807
  1141. X0.18781  0.07285
  1142. X0.15218  0.06664
  1143. X0.11968  0.05958
  1144. X0.09061  0.05183
  1145. X0.06525  0.04354
  1146. X0.04383  0.03489
  1147. X0.02652  0.02610
  1148. X0.01344  0.01741
  1149. X0.00465  0.00917
  1150. X0.00026  0.00192
  1151. X0.00129 -0.00373
  1152. X0.00819 -0.00837
  1153. X0.02044 -0.01250
  1154. X0.03791 -0.01586
  1155. X0.06049 -0.01839
  1156. X0.08801 -0.02008
  1157. X0.12026 -0.02097
  1158. X0.15697 -0.02110
  1159. X0.19778 -0.02059
  1160. X0.24227 -0.01954
  1161. X0.28998 -0.01806
  1162. X0.34035 -0.01627
  1163. X0.39280 -0.01429
  1164. X0.44672 -0.01223
  1165. X0.50145 -0.01018
  1166. X0.55630 -0.00823
  1167. X0.61059 -0.00644
  1168. X0.66364 -0.00485
  1169. X0.71479 -0.00350
  1170. X0.76339 -0.00239
  1171. X0.80882 -0.00153
  1172. X0.85050 -0.00090
  1173. X0.88788 -0.00048
  1174. X0.92048 -0.00018
  1175. X0.94794  0.00010
  1176. X0.97003  0.00033
  1177. X0.98640  0.00034
  1178. X0.99655  0.00014
  1179. X1.00000  0.00000
  1180. END_OF_FILE
  1181. if test 1062 -ne `wc -c <'plotfoil/airfoils/eppler-193'`; then
  1182.     echo shar: \"'plotfoil/airfoils/eppler-193'\" unpacked with wrong size!
  1183. fi
  1184. # end of 'plotfoil/airfoils/eppler-193'
  1185. fi
  1186. if test -f 'plotfoil/airfoils/eppler-205' -a "${1}" != "-c" ; then 
  1187.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/eppler-205'\"
  1188. else
  1189. echo shar: Extracting \"'plotfoil/airfoils/eppler-205'\" \(1017 characters\)
  1190. sed "s/^X//" >'plotfoil/airfoils/eppler-205' <<'END_OF_FILE'
  1191. X1 Eppler-205
  1192. X1.00000 0.00000
  1193. X0.99655 0.00039
  1194. X0.98649 0.00174
  1195. X0.97049 0.00427
  1196. X0.94916 0.00778
  1197. X0.92285 0.01196
  1198. X0.89175 0.01668
  1199. X0.85624 0.02199
  1200. X0.81684 0.02786
  1201. X0.77412 0.03419
  1202. X0.72866 0.04088
  1203. X0.68108 0.04777
  1204. X0.63204 0.05470
  1205. X0.58218 0.06147
  1206. X0.53217 0.06782
  1207. X0.48265 0.07342
  1208. X0.43410 0.07785
  1209. X0.38680 0.08081
  1210. X0.34101 0.08214
  1211. X0.29699 0.08177
  1212. X0.25496 0.07970
  1213. X0.21508 0.07606
  1214. X0.17764 0.07111
  1215. X0.14302 0.06507
  1216. X0.11157 0.05811
  1217. X0.08360 0.05040
  1218. X0.05937 0.04211
  1219. X0.03909 0.03344
  1220. X0.02292 0.02461
  1221. X0.01097 0.01589
  1222. X0.00331 0.00766
  1223. X0.00002 0.00055
  1224. X0.00233 -0.00506
  1225. X0.01065 -0.00988
  1226. X0.02419 -0.01420
  1227. X0.04291 -0.01776
  1228. X0.06669 -0.02053
  1229. X0.09534 -0.02252
  1230. X0.12864 -0.02378
  1231. X0.16627 -0.02436
  1232. X0.20783 -0.02435
  1233. X0.25290 -0.02384
  1234. X0.30097 -0.02292
  1235. X0.35149 -0.02168
  1236. X0.40388 -0.02021
  1237. X0.45751 -0.01859
  1238. X0.51174 -0.01689
  1239. X0.56591 -0.01516
  1240. X0.61938 -0.01345
  1241. X0.67149 -0.01180
  1242. X0.72160 -0.01023
  1243. X0.76911 -0.00876
  1244. X0.81343 -0.00740
  1245. X0.85400 -0.00614
  1246. X0.89034 -0.00489
  1247. X0.92195 -0.00380
  1248. X0.94860 -0.00252
  1249. X0.97017 -0.00125
  1250. X0.98635 -0.00036
  1251. X0.99651 -0.00003
  1252. X1.00000 0.00000
  1253. END_OF_FILE
  1254. if test 1017 -ne `wc -c <'plotfoil/airfoils/eppler-205'`; then
  1255.     echo shar: \"'plotfoil/airfoils/eppler-205'\" unpacked with wrong size!
  1256. fi
  1257. # end of 'plotfoil/airfoils/eppler-205'
  1258. fi
  1259. if test -f 'plotfoil/airfoils/eppler-214' -a "${1}" != "-c" ; then 
  1260.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/eppler-214'\"
  1261. else
  1262. echo shar: Extracting \"'plotfoil/airfoils/eppler-214'\" \(1061 characters\)
  1263. sed "s/^X//" >'plotfoil/airfoils/eppler-214' <<'END_OF_FILE'
  1264. Profil 214  Dicke 11.1%
  1265. X1.00000  0.00000
  1266. X0.99669  0.00104
  1267. X0.98737  0.00422
  1268. X0.97312  0.00916
  1269. X0.95431  0.01501
  1270. X0.93081  0.02139
  1271. X0.90279  0.02833
  1272. X0.87072  0.03576
  1273. X0.83508  0.04344
  1274. X0.79626  0.05105
  1275. X0.75457  0.05841
  1276. X0.71040  0.06544
  1277. X0.66430  0.07207
  1278. X0.61682  0.07813
  1279. X0.56852  0.08344
  1280. X0.51991  0.08776
  1281. X0.47142  0.09093
  1282. X0.42346  0.09281
  1283. X0.37645  0.09332
  1284. X0.33076  0.09241
  1285. X0.28674  0.09008
  1286. X0.24474  0.08639
  1287. X0.20510  0.08142
  1288. X0.16816  0.07532
  1289. X0.13424  0.06822
  1290. X0.10365  0.06028
  1291. X0.07665  0.05168
  1292. X0.05349  0.04258
  1293. X0.03434  0.03321
  1294. X0.01934  0.02379
  1295. X0.00856  0.01465
  1296. X0.00210  0.00619
  1297. X0.00005 -0.00086
  1298. X0.00360 -0.00632
  1299. X0.01326 -0.01087
  1300. X0.02830 -0.01475
  1301. X0.04858 -0.01784
  1302. X0.07390 -0.02011
  1303. X0.10406 -0.02161
  1304. X0.13874 -0.02236
  1305. X0.17759 -0.02245
  1306. X0.22017 -0.02193
  1307. X0.26599 -0.02086
  1308. X0.31449 -0.01928
  1309. X0.36508 -0.01721
  1310. X0.41714 -0.01453
  1311. X0.47030 -0.01100
  1312. X0.52450 -0.00678
  1313. X0.57932 -0.00245
  1314. X0.63400  0.00155
  1315. X0.68770  0.00495
  1316. X0.73959  0.00756
  1317. X0.78883  0.00923
  1318. X0.83461  0.00994
  1319. X0.87612  0.00970
  1320. X0.91265  0.00862
  1321. X0.94352  0.00684
  1322. X0.96809  0.00461
  1323. X0.98582  0.00235
  1324. X0.99646  0.00065
  1325. X1.00000  0.00000
  1326. END_OF_FILE
  1327. if test 1061 -ne `wc -c <'plotfoil/airfoils/eppler-214'`; then
  1328.     echo shar: \"'plotfoil/airfoils/eppler-214'\" unpacked with wrong size!
  1329. fi
  1330. # end of 'plotfoil/airfoils/eppler-214'
  1331. fi
  1332. if test -f 'plotfoil/airfoils/eppler-374' -a "${1}" != "-c" ; then 
  1333.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/eppler-374'\"
  1334. else
  1335. echo shar: Extracting \"'plotfoil/airfoils/eppler-374'\" \(1062 characters\)
  1336. sed "s/^X//" >'plotfoil/airfoils/eppler-374' <<'END_OF_FILE'
  1337. Profil 374  Dicke 10.92%
  1338. X1.00000  0.00000
  1339. X0.99640  0.00045
  1340. X0.98610  0.00204
  1341. X0.97000  0.00485
  1342. X0.94864  0.00846
  1343. X0.92214  0.01264
  1344. X0.89078  0.01747
  1345. X0.85508  0.02297
  1346. X0.81560  0.02905
  1347. X0.77293  0.03560
  1348. X0.72769  0.04246
  1349. X0.68053  0.04944
  1350. X0.63210  0.05629
  1351. X0.58309  0.06269
  1352. X0.53398  0.06821
  1353. X0.48511  0.07252
  1354. X0.43682  0.07544
  1355. X0.38939  0.07685
  1356. X0.34312  0.07670
  1357. X0.29824  0.07507
  1358. X0.25510  0.07217
  1359. X0.21415  0.06817
  1360. X0.17583  0.06319
  1361. X0.14053  0.05734
  1362. X0.10860  0.05073
  1363. X0.08036  0.04351
  1364. X0.05605  0.03581
  1365. X0.03589  0.02781
  1366. X0.02004  0.01973
  1367. X0.00862  0.01186
  1368. X0.00178  0.00459
  1369. X0.00014 -0.00121
  1370. X0.00437 -0.00622
  1371. X0.01427 -0.01130
  1372. X0.02935 -0.01600
  1373. X0.04949 -0.02015
  1374. X0.07454 -0.02369
  1375. X0.10428 -0.02660
  1376. X0.13845 -0.02890
  1377. X0.17669 -0.03060
  1378. X0.21861 -0.03175
  1379. X0.26374 -0.03238
  1380. X0.31158 -0.03255
  1381. X0.36159 -0.03228
  1382. X0.41320 -0.03163
  1383. X0.46580 -0.03064
  1384. X0.51877 -0.02931
  1385. X0.57150 -0.02767
  1386. X0.62336 -0.02569
  1387. X0.67382 -0.02333
  1388. X0.72243 -0.02059
  1389. X0.76873 -0.01760
  1390. X0.81228 -0.01450
  1391. X0.85254 -0.01153
  1392. X0.88892 -0.00882
  1393. X0.92085 -0.00643
  1394. X0.94783 -0.00432
  1395. X0.96958 -0.00241
  1396. X0.98594 -0.00091
  1397. X0.99637 -0.00016
  1398. X1.00000  0.00000
  1399. END_OF_FILE
  1400. if test 1062 -ne `wc -c <'plotfoil/airfoils/eppler-374'`; then
  1401.     echo shar: \"'plotfoil/airfoils/eppler-374'\" unpacked with wrong size!
  1402. fi
  1403. # end of 'plotfoil/airfoils/eppler-374'
  1404. fi
  1405. if test -f 'plotfoil/airfoils/eppler-387' -a "${1}" != "-c" ; then 
  1406.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/eppler-387'\"
  1407. else
  1408. echo shar: Extracting \"'plotfoil/airfoils/eppler-387'\" \(1061 characters\)
  1409. sed "s/^X//" >'plotfoil/airfoils/eppler-387' <<'END_OF_FILE'
  1410. Profil 387  Dicke 9.06%
  1411. X1.00000  0.00000
  1412. X0.99677  0.00043
  1413. X0.98729  0.00180
  1414. X0.97198  0.00423
  1415. X0.95128  0.00763
  1416. X0.92554  0.01184
  1417. X0.89510  0.01679
  1418. X0.86035  0.02242
  1419. X0.82183  0.02866
  1420. X0.78007  0.03540
  1421. X0.73567  0.04249
  1422. X0.68922  0.04975
  1423. X0.64136  0.05696
  1424. X0.59272  0.06390
  1425. X0.54394  0.07020
  1426. X0.49549  0.07546
  1427. X0.44767  0.07936
  1428. X0.40077  0.08173
  1429. X0.35505  0.08247
  1430. X0.31078  0.08156
  1431. X0.26813  0.07908
  1432. X0.22742  0.07529
  1433. X0.18906  0.07037
  1434. X0.15345  0.06448
  1435. X0.12094  0.05775
  1436. X0.09185  0.05033
  1437. X0.06643  0.04238
  1438. X0.04493  0.03408
  1439. X0.02748  0.02562
  1440. X0.01423  0.01726
  1441. X0.00519  0.00931
  1442. X0.00044  0.00234
  1443. X0.00091 -0.00286
  1444. X0.00717 -0.00682
  1445. X0.01890 -0.01017
  1446. X0.03596 -0.01265
  1447. X0.05827 -0.01425
  1448. X0.08569 -0.01500
  1449. X0.11800 -0.01502
  1450. X0.15490 -0.01441
  1451. X0.19599 -0.01329
  1452. X0.24083 -0.01177
  1453. X0.28892 -0.00998
  1454. X0.33968 -0.00804
  1455. X0.39252 -0.00605
  1456. X0.44679 -0.00410
  1457. X0.50182 -0.00228
  1458. X0.55694 -0.00065
  1459. X0.61147  0.00074
  1460. X0.66472  0.00186
  1461. X0.71602  0.00268
  1462. X0.76475  0.00320
  1463. X0.81027  0.00342
  1464. X0.85202  0.00337
  1465. X0.88944  0.00307
  1466. X0.92205  0.00258
  1467. X0.94942  0.00196
  1468. X0.97118  0.00132
  1469. X0.98705  0.00071
  1470. X0.99674  0.00021
  1471. X1.00000  0.00000
  1472. END_OF_FILE
  1473. if test 1061 -ne `wc -c <'plotfoil/airfoils/eppler-387'`; then
  1474.     echo shar: \"'plotfoil/airfoils/eppler-387'\" unpacked with wrong size!
  1475. fi
  1476. # end of 'plotfoil/airfoils/eppler-387'
  1477. fi
  1478. if test -f 'plotfoil/airfoils/naca-winglets' -a "${1}" != "-c" ; then 
  1479.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/naca-winglets'\"
  1480. else
  1481. echo shar: Extracting \"'plotfoil/airfoils/naca-winglets'\" \(423 characters\)
  1482. sed "s/^X//" >'plotfoil/airfoils/naca-winglets' <<'END_OF_FILE'
  1483. X2 NACA Winglet
  1484. X0.0000  0.0000   0.0000
  1485. X0.0125  0.0179  -0.0060
  1486. X0.0250  0.0249  -0.0077
  1487. X0.0375  0.0296  -0.0090
  1488. X0.0500  0.0333  -0.0100
  1489. X0.0750  0.0389  -0.0118
  1490. X0.1000  0.0433  -0.0132
  1491. X0.1500  0.0499  -0.0154
  1492. X0.2000  0.0547  -0.0167
  1493. X0.3000  0.0605  -0.0176
  1494. X0.4000  0.0628  -0.0168
  1495. X0.5000  0.0618  -0.0144
  1496. X0.6000  0.0572  -0.0090
  1497. X0.7000  0.0481  -0.0015
  1498. X0.8000  0.0349   0.0049
  1499. X0.9000  0.0184   0.0059
  1500. X1.0000  0.0000   0.0000
  1501. END_OF_FILE
  1502. if test 423 -ne `wc -c <'plotfoil/airfoils/naca-winglets'`; then
  1503.     echo shar: \"'plotfoil/airfoils/naca-winglets'\" unpacked with wrong size!
  1504. fi
  1505. # end of 'plotfoil/airfoils/naca-winglets'
  1506. fi
  1507. if test -f 'plotfoil/airfoils/naca0009' -a "${1}" != "-c" ; then 
  1508.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/naca0009'\"
  1509. else
  1510. echo shar: Extracting \"'plotfoil/airfoils/naca0009'\" \(1185 characters\)
  1511. sed "s/^X//" >'plotfoil/airfoils/naca0009' <<'END_OF_FILE'
  1512. NACA-0009 9.0% smoothed
  1513. X1.00000  0.0
  1514. X0.99572  0.00057
  1515. X0.98296  0.00218
  1516. X0.96194  0.00463
  1517. X0.93301  0.00770
  1518. X0.89668  0.01127
  1519. X0.85355  0.01522
  1520. X0.80438  0.01945
  1521. X0.75000  0.02384
  1522. X0.69134  0.02823
  1523. X0.62941  0.03247
  1524. X0.56526  0.03638
  1525. X0.50000  0.03978
  1526. X0.43474  0.04248
  1527. X0.37059  0.04431
  1528. X0.33928  0.04484
  1529. X0.30866  0.04509
  1530. X0.27886  0.04504
  1531. X0.25000  0.04466
  1532. X0.22221  0.04397
  1533. X0.19562  0.04295
  1534. X0.17033  0.04161
  1535. X0.14645  0.03994
  1536. X0.12408  0.03795
  1537. X0.10332  0.03564
  1538. X0.08427  0.03305
  1539. X0.06699  0.03023
  1540. X0.05156  0.02720
  1541. X0.03806  0.02395
  1542. X0.02653  0.02039
  1543. X0.01704  0.01646
  1544. X0.00961  0.01214
  1545. X0.00428  0.00767
  1546. X0.00107  0.00349
  1547. X0.0      0.0
  1548. X0.00107 -0.00349
  1549. X0.00428 -0.00767
  1550. X0.00961 -0.01214
  1551. X0.01704 -0.01646
  1552. X0.02653 -0.02039
  1553. X0.03806 -0.02395
  1554. X0.05156 -0.02720
  1555. X0.06699 -0.03023
  1556. X0.08427 -0.03305
  1557. X0.10332 -0.03564
  1558. X0.12408 -0.03795
  1559. X0.14645 -0.03994
  1560. X0.17033 -0.04161
  1561. X0.19562 -0.04295
  1562. X0.22221 -0.04397
  1563. X0.25000 -0.04466
  1564. X0.27886 -0.04504
  1565. X0.30866 -0.04509
  1566. X0.33928 -0.04484
  1567. X0.37059 -0.04431
  1568. X0.43474 -0.04248
  1569. X0.50000 -0.03978
  1570. X0.56526 -0.03638
  1571. X0.62941 -0.03247
  1572. X0.69134 -0.02823
  1573. X0.75000 -0.02384
  1574. X0.80438 -0.01945
  1575. X0.85355 -0.01522
  1576. X0.89668 -0.01127
  1577. X0.93301 -0.00770
  1578. X0.96194 -0.00463
  1579. X0.98296 -0.00218
  1580. X0.99572 -0.00057
  1581. X1.00000  0.0
  1582. END_OF_FILE
  1583. if test 1185 -ne `wc -c <'plotfoil/airfoils/naca0009'`; then
  1584.     echo shar: \"'plotfoil/airfoils/naca0009'\" unpacked with wrong size!
  1585. fi
  1586. # end of 'plotfoil/airfoils/naca0009'
  1587. fi
  1588. if test -f 'plotfoil/airfoils/naca23012' -a "${1}" != "-c" ; then 
  1589.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/naca23012'\"
  1590. else
  1591. echo shar: Extracting \"'plotfoil/airfoils/naca23012'\" \(365 characters\)
  1592. sed "s/^X//" >'plotfoil/airfoils/naca23012' <<'END_OF_FILE'
  1593. X2 NACA 23012
  1594. X0.0000 0.0000  0.0000
  1595. X0.0125 0.0267 -0.0123
  1596. X0.025  0.0361 -0.0171
  1597. X0.050  0.0491 -0.0226
  1598. X0.075  0.0580 -0.0261
  1599. X0.100  0.0643 -0.0292
  1600. X0.200  0.0750 -0.0397
  1601. X0.300  0.0755 -0.0446
  1602. X0.400  0.0714 -0.0448
  1603. X0.500  0.0641 -0.0417
  1604. X0.600  0.0547 -0.0367
  1605. X0.700  0.0436 -0.0300
  1606. X0.800  0.0308 -0.0216
  1607. X0.900  0.0168 -0.0123
  1608. X0.950  0.0092 -0.0070
  1609. X1.000  0.0000  0.0000
  1610. END_OF_FILE
  1611. if test 365 -ne `wc -c <'plotfoil/airfoils/naca23012'`; then
  1612.     echo shar: \"'plotfoil/airfoils/naca23012'\" unpacked with wrong size!
  1613. fi
  1614. # end of 'plotfoil/airfoils/naca23012'
  1615. fi
  1616. if test -f 'plotfoil/airfoils/naca4412' -a "${1}" != "-c" ; then 
  1617.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/naca4412'\"
  1618. else
  1619. echo shar: Extracting \"'plotfoil/airfoils/naca4412'\" \(408 characters\)
  1620. sed "s/^X//" >'plotfoil/airfoils/naca4412' <<'END_OF_FILE'
  1621. X2 NACA 4412
  1622. X0.0000 0.0000  0.0000
  1623. X0.0125 0.0244 -0.0143
  1624. X0.0250 0.0339 -0.0195
  1625. X0.0500 0.0473 -0.0249
  1626. X0.0750 0.0576 -0.0274
  1627. X0.1000 0.0659 -0.0286
  1628. X0.1500 0.0789 -0.0288
  1629. X0.2000 0.0880 -0.0274
  1630. X0.2500 0.0941 -0.0250
  1631. X0.3000 0.0976 -0.0226
  1632. X0.4000 0.0980 -0.0180
  1633. X0.5000 0.0919 -0.0140
  1634. X0.6000 0.0814 -0.0100
  1635. X0.7000 0.0669 -0.0065
  1636. X0.8000 0.0489 -0.0039
  1637. X0.9000 0.0271 -0.0022
  1638. X0.9500 0.0147 -0.0016
  1639. X1.0000 0.0000  0.0000
  1640. END_OF_FILE
  1641. if test 408 -ne `wc -c <'plotfoil/airfoils/naca4412'`; then
  1642.     echo shar: \"'plotfoil/airfoils/naca4412'\" unpacked with wrong size!
  1643. fi
  1644. # end of 'plotfoil/airfoils/naca4412'
  1645. fi
  1646. if test -f 'plotfoil/airfoils/naca6409' -a "${1}" != "-c" ; then 
  1647.   echo shar: Will not clobber existing file \"'plotfoil/airfoils/naca6409'\"
  1648. else
  1649. echo shar: Extracting \"'plotfoil/airfoils/naca6409'\" \(1049 characters\)
  1650. sed "s/^X//" >'plotfoil/airfoils/naca6409' <<'END_OF_FILE'
  1651. NACA6409 9%
  1652. X1.00000  0.00000
  1653. X0.99732  0.00084
  1654. X0.98930  0.00333
  1655. X0.97603  0.00737
  1656. X0.95760  0.01284
  1657. X0.93423  0.01954
  1658. X0.90615  0.02724
  1659. X0.87357  0.03571
  1660. X0.83690  0.04464
  1661. X0.79647  0.05378
  1662. X0.75272  0.06283
  1663. X0.70608  0.07153
  1664. X0.65710  0.07961
  1665. X0.60627  0.08684
  1666. X0.55413  0.09302
  1667. X0.50132  0.09796
  1668. X0.44840  0.10152
  1669. X0.39590  0.10360
  1670. X0.34367  0.10352
  1671. X0.29315  0.10086
  1672. X0.24502  0.09584
  1673. X0.19988  0.08874
  1674. X0.15830  0.07992
  1675. X0.12080  0.06982
  1676. X0.08780  0.05889
  1677. X0.05968  0.04762
  1678. X0.03677  0.03646
  1679. X0.01920  0.02581
  1680. X0.00720  0.01603
  1681. X0.00080  0.00737
  1682. X0.00000  0.00000
  1683. X0.00467 -0.00573
  1684. X0.01467 -0.00956
  1685. X0.02973 -0.01157
  1686. X0.04970 -0.01192
  1687. X0.07428 -0.01080
  1688. X0.10317 -0.00844
  1689. X0.13607 -0.00513
  1690. X0.17257 -0.00119
  1691. X0.21235  0.00307
  1692. X0.25498  0.00729
  1693. X0.30012  0.01112
  1694. X0.34730  0.01425
  1695. X0.39618  0.01639
  1696. X0.44707  0.01772
  1697. X0.49868  0.01871
  1698. X0.55040  0.01925
  1699. X0.60167  0.01929
  1700. X0.65193  0.01880
  1701. X0.70065  0.01780
  1702. X0.74728  0.01634
  1703. X0.79130  0.01451
  1704. X0.83223  0.01241
  1705. X0.86957  0.01017
  1706. X0.90288  0.00791
  1707. X0.93180  0.00576
  1708. X0.95593  0.00383
  1709. X0.97503  0.00221
  1710. X0.98883  0.00101
  1711. X0.99722  0.00025
  1712. X1.00000  0.00000
  1713. END_OF_FILE
  1714. if test 1049 -ne `wc -c <'plotfoil/airfoils/naca6409'`; then
  1715.     echo shar: \"'plotfoil/airfoils/naca6409'\" unpacked with wrong size!
  1716. fi
  1717. # end of 'plotfoil/airfoils/naca6409'
  1718. fi
  1719. echo shar: End of archive 2 \(of 3\).
  1720. cp /dev/null ark2isdone
  1721. MISSING=""
  1722. for I in 1 2 3 ; do
  1723.     if test ! -f ark${I}isdone ; then
  1724.     MISSING="${MISSING} ${I}"
  1725.     fi
  1726. done
  1727. if test "${MISSING}" = "" ; then
  1728.     echo You have unpacked all 3 archives.
  1729.     rm -f ark[1-9]isdone
  1730. else
  1731.     echo You still need to unpack the following archives:
  1732.     echo "        " ${MISSING}
  1733. fi
  1734. ##  End of shell archive.
  1735. exit 0
  1736.  
  1737. -- 
  1738.   Shamim Mohamed / {uunet,noao,cmcl2..}!arizona!shamim / shamim@cs.arizona.edu
  1739.  Member of the League for Programming Freedom - write to league@prep.ai.mit.edu
  1740.  
  1741. exit 0 # Just in case...
  1742.