Source Code 1994 March/Source_Code_CD-ROM_Walnut_Creek_March_1994.iso/compsrcs/misc/volume29/jpeg/part17

Text File | 1992-03-27 | 53.8 KB | 1,543 lines

Newsgroups: comp.sources.misc
From: [e-mail] (Independent JPEG Group)
Subject:  v29i017:  jpeg - JPEG image compression, Part17/18
Message-ID: <[e-mail]>
X-Md4-Signature: 5b5d61f034203cb46524dcff2236363e
Date: Wed, 25 Mar 1992 14:55:00 GMT
Approved: [e-mail]

Submitted-by: [e-mail] (Independent JPEG Group)
Posting-number: Volume 29, Issue 17
Archive-name: jpeg/part17
Environment: UNIX, VMS, MS-DOS, Mac, Amiga, Cray

#! /bin/sh
# into a shell via "sh file" or similar.  To overwrite existing files,
# type "sh file -c".
# The tool that generated this appeared in the comp.sources.unix newsgroup;
# send mail to [e-mail] if you want that tool.
# Contents:  cjpeg.1 jcmaster.c jcmcu.c jdmaster.c jmemdos.h jmemsys.h
#   jwrppm.c makcjpeg.cf makcjpeg.lst makdjpeg.lst makefile.mc6
#   makefile.pwc
# Wrapped by kent@sparky on Mon Mar 23 16:02:57 1992
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
echo If this archive is complete, you will see the following message:
echo '          "shar: End of archive 17 (of 18)."'
if test -f 'cjpeg.1' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'cjpeg.1'\"
else
  echo shar: Extracting \"'cjpeg.1'\" \(4126 characters\)
  sed "s/^X//" >'cjpeg.1' <<'END_OF_FILE'
X.TH CJPEG 1 "28 February 1992"
X.SH NAME
Xcjpeg \- compress an image file to a JPEG file
X.SH SYNOPSIS
X.B cjpeg
X[
X.BI \-Q " quality"
X]
X[
X.B \-oTIad
X]
X[
X.BI \-m " memory"
X]
X[
X.I filename
X]
X.LP
X.SH DESCRIPTION
X.LP
X.B cjpeg
Xcompresses the named image file, or the standard input if no file is
Xnamed, and produces a JPEG/JFIF file on the standard output.
XThe currently supported image file formats are: PPM (PBMPLUS color
Xformat), PGM (PBMPLUS gray-scale format), GIF, Targa, and RLE (Utah Raster
XToolkit format).  (RLE is supported only if the URT library is available.)
X.SH OPTIONS
X.TP
X.BI \-Q " quality"
XScale quantization tables to adjust image quality.  Quality is 0 (worst) to
X100 (best); default is 75.  (See below for more info.)
X.TP
X.B \-o
XPerform optimization of entropy encoding parameters.  Without this, default
Xencoding parameters are used.
X.B \-o
Xusually makes the JPEG file a little smaller, but
X.B cjpeg
Xruns somewhat slower and needs much more memory.  Image quality and speed of
Xdecompression are unaffected by
X.BR \-o .
X.TP
X.B \-T
XInput file is Targa format.  Targa files that contain an "identification"
Xfield will not be automatically recognized by
X.BR cjpeg ;
Xfor such files you must specify
X.B \-T
Xto force
X.B cjpeg
Xto treat the input as Targa format.
X.TP
X.B \-I
XGenerate noninterleaved JPEG file (not yet supported).
X.TP
X.B \-a
XUse arithmetic coding rather than Huffman coding (not currently
Xsupported for legal reasons).
X.TP
X.B \-d
XEnable debug printout.  More
X.BR \-d 's
Xgive more output.  Also, version information is printed at startup.
X.TP
X.BI \-m " memory"
XSet limit for amount of memory to use in processing large images.  Value is
Xin thousands of bytes, or millions of bytes if "M" is attached to the
Xnumber.  For example,
X.B \-m 4m
Xselects 4000000 bytes.  If more space is needed, temporary files will be used.
X.PP
XThe
X.B \-Q
Xswitch lets you trade off compressed file size against quality of the
Xreconstructed image: the higher the
X.B \-Q
Xsetting, the larger the JPEG file, and the closer the output image will be to
Xthe original input.  Normally you want to use the lowest
X.B \-Q
Xsetting (smallest file) that decompresses into something visually
Xindistinguishable from the original image.  For this purpose the
X.B \-Q
Xsetting should be between 50 and 95; the default of 75 is often about right.
XIf you see defects at
X.B \-Q
X75, then go up 5 or 10 counts at a time until you are happy with the output
Ximage.  (The optimal setting will vary from one image to another.)
X.PP
X.B \-Q
X100 will generate a quantization table of all 1's, eliminating loss in the
Xquantization step (but there is still information loss in subsampling, as well
Xas roundoff error).  This setting is mainly of interest for experimental
Xpurposes.
X.B \-Q
Xvalues above about 95 are
X.B not
Xrecommended for normal use; the compressed file size goes up dramatically for
Xhardly any gain in output image quality.
X.PP
XIn the other direction,
X.B \-Q
Xvalues below 50 will produce very small files of low image quality.  Settings
Xaround 5 to 10 might be useful in preparing an index of a large image library,
Xfor example.  Try
X.B \-Q
X2 (or so) for some amusing Cubist effects.  (Note:
X.B \-Q
Xvalues below about 25 generate 2-byte quantization tables, which are
Xconsidered optional in the JPEG standard.
X.B cjpeg
Xemits a warning message when you give such a
X.B \-Q
Xvalue, because some commercial JPEG programs may be unable to decode the
Xresulting file.)
X.SH EXAMPLES
X.LP
XThis example compresses the PPM file foo.ppm with a quality factor of
X60 and saves the output as foo.jpg:
X.IP
X.B cjpeg \-Q
X.I 60 foo.ppm
X.B >
X.I foo.jpg
X.SH SEE ALSO
X.BR djpeg (1)
X.br
X.BR ppm (5),
X.BR pgm (5)
X.br
XWallace, Gregory K.  "The JPEG Still Picture Compression Standard",
XCommunications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
X.SH AUTHOR
XIndependent JPEG Group
X.SH BUGS
XArithmetic coding and interleaved output not yet supported.
X.PP
XNot all variants of Targa file format are supported.
X.PP
XThe
X.B -T
Xswitch is not a bug, it's a feature.  (It would be a bug if the Targa format
Xdesigners had not been clueless.)
X.PP
XNot as fast as we'd like.
END_OF_FILE
  if test 4126 -ne `wc -c <'cjpeg.1'`; then
    echo shar: \"'cjpeg.1'\" unpacked with wrong size!
  fi
  # end of 'cjpeg.1'
fi
if test -f 'jcmaster.c' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'jcmaster.c'\"
else
  echo shar: Extracting \"'jcmaster.c'\" \(4201 characters\)
  sed "s/^X//" >'jcmaster.c' <<'END_OF_FILE'
X/*
X * jcmaster.c
X *
X * Copyright (C) 1991, 1992, Thomas G. Lane.
X * This file is part of the Independent JPEG Group's software.
X * For conditions of distribution and use, see the accompanying README file.
X *
X * This file contains the main control for the JPEG compressor.
X * The system-dependent (user interface) code should call jpeg_compress()
X * after doing appropriate setup of the compress_info_struct parameter.
X */
X
X#include "jinclude.h"
X
X
XMETHODDEF void
Xc_per_scan_method_selection (compress_info_ptr cinfo)
X/* Central point for per-scan method selection */
X{
X  /* Edge expansion */
X  jselexpand(cinfo);
X  /* Subsampling of pixels */
X  jselsubsample(cinfo);
X  /* MCU extraction */
X  jselcmcu(cinfo);
X}
X
X
XLOCAL void
Xc_initial_method_selection (compress_info_ptr cinfo)
X/* Central point for initial method selection */
X{
X  /* Input image reading method selection is already done. */
X  /* So is output file header formatting (both are done by user interface). */
X
X  /* Gamma and color space conversion */
X  jselccolor(cinfo);
X  /* Entropy encoding: either Huffman or arithmetic coding. */
X#ifdef ARITH_CODING_SUPPORTED
X  jselcarithmetic(cinfo);
X#else
X  cinfo->arith_code = FALSE;    /* force Huffman mode */
X#endif
X  jselchuffman(cinfo);
X  /* Pipeline control */
X  jselcpipeline(cinfo);
X  /* Overall control (that's me!) */
X  cinfo->methods->c_per_scan_method_selection = c_per_scan_method_selection;
X}
X
X
XLOCAL void
Xinitial_setup (compress_info_ptr cinfo)
X/* Do computations that are needed before initial method selection */
X{
X  short ci;
X  jpeg_component_info *compptr;
X
X  /* Compute maximum sampling factors; check factor validity */
X  cinfo->max_h_samp_factor = 1;
X  cinfo->max_v_samp_factor = 1;
X  for (ci = 0; ci < cinfo->num_components; ci++) {
X    compptr = &cinfo->comp_info[ci];
X    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
X    compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
X      ERREXIT(cinfo->emethods, "Bogus sampling factors");
X    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
X                   compptr->h_samp_factor);
X    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
X                   compptr->v_samp_factor);
X
X  }
X
X  /* Compute logical subsampled dimensions of components */
X  for (ci = 0; ci < cinfo->num_components; ci++) {
X    compptr = &cinfo->comp_info[ci];
X    compptr->true_comp_width = (cinfo->image_width * compptr->h_samp_factor
X                + cinfo->max_h_samp_factor - 1)
X                / cinfo->max_h_samp_factor;
X    compptr->true_comp_height = (cinfo->image_height * compptr->v_samp_factor
X                 + cinfo->max_v_samp_factor - 1)
X                 / cinfo->max_v_samp_factor;
X  }
X}
X
X
X/*
X * This is the main entry point to the JPEG compressor.
X */
X
X
XGLOBAL void
Xjpeg_compress (compress_info_ptr cinfo)
X{
X  /* Init pass counts to 0 --- total_passes is adjusted in method selection */
X  cinfo->total_passes = 0;
X  cinfo->completed_passes = 0;
X
X  /* Read the input file header: determine image size & component count.
X   * NOTE: the user interface must have initialized the input_init method
X   * pointer (eg, by calling jselrppm) before calling me.
X   * The other file reading methods (get_input_row etc.) were probably
X   * set at the same time, but could be set up by input_init itself,
X   * or by c_ui_method_selection.
X   */
X  (*cinfo->methods->input_init) (cinfo);
X
X  /* Give UI a chance to adjust compression parameters and select */
X  /* output file format based on results of input_init. */
X  (*cinfo->methods->c_ui_method_selection) (cinfo);
X
X  /* Now select methods for compression steps. */
X  initial_setup(cinfo);
X  c_initial_method_selection(cinfo);
X
X  /* Initialize the output file & other modules as needed */
X  /* (entropy_encoder is inited by pipeline controller) */
X
X  (*cinfo->methods->colorin_init) (cinfo);
X  (*cinfo->methods->write_file_header) (cinfo);
X
X  /* And let the pipeline controller do the rest. */
X  (*cinfo->methods->c_pipeline_controller) (cinfo);
X
X  /* Finish output file, release working storage, etc */
X  (*cinfo->methods->write_file_trailer) (cinfo);
X  (*cinfo->methods->colorin_term) (cinfo);
X  (*cinfo->methods->input_term) (cinfo);
X
X  (*cinfo->emethods->free_all) ();
X
X  /* My, that was easy, wasn't it? */
X}
END_OF_FILE
  if test 4201 -ne `wc -c <'jcmaster.c'`; then
    echo shar: \"'jcmaster.c'\" unpacked with wrong size!
  fi
  # end of 'jcmaster.c'
fi
if test -f 'jcmcu.c' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'jcmcu.c'\"
else
  echo shar: Extracting \"'jcmcu.c'\" \(5804 characters\)
  sed "s/^X//" >'jcmcu.c' <<'END_OF_FILE'
X/*
X * jcmcu.c
X *
X * Copyright (C) 1991, 1992, Thomas G. Lane.
X * This file is part of the Independent JPEG Group's software.
X * For conditions of distribution and use, see the accompanying README file.
X *
X * This file contains MCU extraction routines and quantization scaling.
X * These routines are invoked via the extract_MCUs and
X * extract_init/term methods.
X */
X
X#include "jinclude.h"
X
X
X/*
X * If this file is compiled with -DDCT_ERR_STATS, it will reverse-DCT each
X * block and sum the total errors across the whole picture.  This provides
X * a convenient method of using real picture data to test the roundoff error
X * of a DCT algorithm.  DCT_ERR_STATS should *not* be defined for a production
X * compression program, since compression is much slower with it defined.
X * Also note that jrevdct.o must be linked into the compressor when this
X * switch is defined.
X */
X
X#ifdef DCT_ERR_STATS
Xstatic int dcterrorsum;        /* these hold the error statistics */
Xstatic int dcterrormax;
Xstatic int dctcoefcount;    /* This will probably overflow on a 16-bit-int machine */
X#endif
X
X
X/* ZAG[i] is the natural-order position of the i'th element of zigzag order. */
X
Xstatic const short ZAG[DCTSIZE2] = {
X  0,  1,  8, 16,  9,  2,  3, 10,
X 17, 24, 32, 25, 18, 11,  4,  5,
X 12, 19, 26, 33, 40, 48, 41, 34,
X 27, 20, 13,  6,  7, 14, 21, 28,
X 35, 42, 49, 56, 57, 50, 43, 36,
X 29, 22, 15, 23, 30, 37, 44, 51,
X 58, 59, 52, 45, 38, 31, 39, 46,
X 53, 60, 61, 54, 47, 55, 62, 63
X};
X
X
XLOCAL void
Xextract_block (JSAMPARRAY input_data, int start_row, long start_col,
X           JBLOCK output_data, QUANT_TBL_PTR quanttbl)
X/* Extract one 8x8 block from the specified location in the sample array; */
X/* perform forward DCT, quantization scaling, and zigzag reordering on it. */
X{
X  /* This routine is heavily used, so it's worth coding it tightly. */
X  DCTBLOCK block;
X#ifdef DCT_ERR_STATS
X  DCTBLOCK svblock;        /* saves input data for comparison */
X#endif
X
X  { register JSAMPROW elemptr;
X    register DCTELEM *localblkptr = block;
X#if DCTSIZE != 8
X    register short elemc;
X#endif
X    register short elemr;
X
X    for (elemr = DCTSIZE; elemr > 0; elemr--) {
X      elemptr = input_data[start_row++] + start_col;
X#if DCTSIZE == 8        /* unroll the inner loop */
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X#else
X      for (elemc = DCTSIZE; elemc > 0; elemc--) {
X    *localblkptr++ = (DCTELEM) GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
X      }
X#endif
X    }
X  }
X
X#ifdef DCT_ERR_STATS
X  memcpy((void *) svblock, (void *) block, SIZEOF(DCTBLOCK));
X#endif
X
X  j_fwd_dct(block);
X
X  { register JCOEF temp;
X    register short i;
X
X    for (i = 0; i < DCTSIZE2; i++) {
X      temp = (JCOEF) block[ZAG[i]];
X      /* divide by *quanttbl, ensuring proper rounding */
X      if (temp < 0) {
X    temp = -temp;
X    temp += *quanttbl>>1;
X    temp /= *quanttbl;
X    temp = -temp;
X      } else {
X    temp += *quanttbl>>1;
X    temp /= *quanttbl;
X      }
X      *output_data++ = temp;
X      quanttbl++;
X    }
X  }
X
X#ifdef DCT_ERR_STATS
X  j_rev_dct(block);
X
X  { register int diff;
X    register short i;
X
X    for (i = 0; i < DCTSIZE2; i++) {
X      diff = block[i] - svblock[i];
X      if (diff < 0) diff = -diff;
X      dcterrorsum += diff;
X      if (dcterrormax < diff) dcterrormax = diff;
X    }
X    dctcoefcount += DCTSIZE2;
X  }
X#endif
X}
X
X
X/*
X * Extract samples in MCU order, process & hand off to output_method.
X * The input is always exactly N MCU rows worth of data.
X */
X
XMETHODDEF void
Xextract_MCUs (compress_info_ptr cinfo,
X          JSAMPIMAGE image_data,
X          int num_mcu_rows,
X          MCU_output_method_ptr output_method)
X{
X  JBLOCK MCU_data[MAX_BLOCKS_IN_MCU];
X  int mcurow;
X  long mcuindex;
X  short blkn, ci, xpos, ypos;
X  jpeg_component_info * compptr;
X  QUANT_TBL_PTR quant_ptr;
X
X  for (mcurow = 0; mcurow < num_mcu_rows; mcurow++) {
X    for (mcuindex = 0; mcuindex < cinfo->MCUs_per_row; mcuindex++) {
X      /* Extract data from the image array, DCT it, and quantize it */
X      blkn = 0;
X      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
X    compptr = cinfo->cur_comp_info[ci];
X    quant_ptr = cinfo->quant_tbl_ptrs[compptr->quant_tbl_no];
X    for (ypos = 0; ypos < compptr->MCU_height; ypos++) {
X      for (xpos = 0; xpos < compptr->MCU_width; xpos++) {
X        extract_block(image_data[ci],
X              (mcurow * compptr->MCU_height + ypos)*DCTSIZE,
X              (mcuindex * compptr->MCU_width + xpos)*DCTSIZE,
X              MCU_data[blkn], quant_ptr);
X        blkn++;
X      }
X    }
X      }
X      /* Send the MCU whereever the pipeline controller wants it to go */
X      (*output_method) (cinfo, MCU_data);
X    }
X  }
X}
X
X
X/*
X * Initialize for processing a scan.
X */
X
XMETHODDEF void
Xextract_init (compress_info_ptr cinfo)
X{
X  /* no work for now */
X#ifdef DCT_ERR_STATS
X  dcterrorsum = dcterrormax = dctcoefcount = 0;
X#endif
X}
X
X
X/*
X * Clean up after a scan.
X */
X
XMETHODDEF void
Xextract_term (compress_info_ptr cinfo)
X{
X  /* no work for now */
X#ifdef DCT_ERR_STATS
X  TRACEMS3(cinfo->emethods, 0, "DCT roundoff errors = %d/%d,  max = %d",
X       dcterrorsum, dctcoefcount, dcterrormax);
X#endif
X}
X
X
X
X/*
X * The method selection routine for MCU extraction.
X */
X
XGLOBAL void
Xjselcmcu (compress_info_ptr cinfo)
X{
X  /* just one implementation for now */
X  cinfo->methods->extract_init = extract_init;
X  cinfo->methods->extract_MCUs = extract_MCUs;
X  cinfo->methods->extract_term = extract_term;
X}
END_OF_FILE
  if test 5804 -ne `wc -c <'jcmcu.c'`; then
    echo shar: \"'jcmcu.c'\" unpacked with wrong size!
  fi
  # end of 'jcmcu.c'
fi
if test -f 'jdmaster.c' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'jdmaster.c'\"
else
  echo shar: Extracting \"'jdmaster.c'\" \(5627 characters\)
  sed "s/^X//" >'jdmaster.c' <<'END_OF_FILE'
X/*
X * jdmaster.c
X *
X * Copyright (C) 1991, 1992, Thomas G. Lane.
X * This file is part of the Independent JPEG Group's software.
X * For conditions of distribution and use, see the accompanying README file.
X *
X * This file contains the main control for the JPEG decompressor.
X * The system-dependent (user interface) code should call jpeg_decompress()
X * after doing appropriate setup of the decompress_info_struct parameter.
X */
X
X#include "jinclude.h"
X
X
XMETHODDEF void
Xd_per_scan_method_selection (decompress_info_ptr cinfo)
X/* Central point for per-scan method selection */
X{
X  /* MCU disassembly */
X  jseldmcu(cinfo);
X  /* Un-subsampling of pixels */
X  jselunsubsample(cinfo);
X}
X
X
XLOCAL void
Xd_initial_method_selection (decompress_info_ptr cinfo)
X/* Central point for initial method selection (after reading file header) */
X{
X  /* JPEG file scanning method selection is already done. */
X  /* So is output file format selection (both are done by user interface). */
X
X  /* Entropy decoding: either Huffman or arithmetic coding. */
X#ifdef ARITH_CODING_SUPPORTED
X  jseldarithmetic(cinfo);
X#else
X  if (cinfo->arith_code) {
X    ERREXIT(cinfo->emethods, "Arithmetic coding not supported");
X  }
X#endif
X  jseldhuffman(cinfo);
X  /* Cross-block smoothing */
X#ifdef BLOCK_SMOOTHING_SUPPORTED
X  jselbsmooth(cinfo);
X#else
X  cinfo->do_block_smoothing = FALSE;
X#endif
X  /* Gamma and color space conversion */
X  jseldcolor(cinfo);
X
X  /* Color quantization selection rules */
X#ifdef QUANT_1PASS_SUPPORTED
X#ifdef QUANT_2PASS_SUPPORTED
X  /* We have both, check for conditions in which 1-pass should be used */
X  if (cinfo->num_components != 3 || cinfo->jpeg_color_space != CS_YCbCr)
X    cinfo->two_pass_quantize = FALSE; /* 2-pass only handles YCbCr input */
X  if (cinfo->out_color_space == CS_GRAYSCALE)
X    cinfo->two_pass_quantize = FALSE; /* Should use 1-pass for grayscale out */
X#else /* not QUANT_2PASS_SUPPORTED */
X  cinfo->two_pass_quantize = FALSE; /* only have 1-pass */
X#endif
X#else /* not QUANT_1PASS_SUPPORTED */
X#ifdef QUANT_2PASS_SUPPORTED
X  cinfo->two_pass_quantize = TRUE; /* only have 2-pass */
X#else /* not QUANT_2PASS_SUPPORTED */
X  if (cinfo->quantize_colors) {
X    ERREXIT(cinfo->emethods, "Color quantization was not compiled");
X  }
X#endif
X#endif
X
X#ifdef QUANT_1PASS_SUPPORTED
X  jsel1quantize(cinfo);
X#endif
X#ifdef QUANT_2PASS_SUPPORTED
X  jsel2quantize(cinfo);
X#endif
X
X  /* Pipeline control */
X  jseldpipeline(cinfo);
X  /* Overall control (that's me!) */
X  cinfo->methods->d_per_scan_method_selection = d_per_scan_method_selection;
X}
X
X
XLOCAL void
Xinitial_setup (decompress_info_ptr cinfo)
X/* Do computations that are needed before initial method selection */
X{
X  short ci;
X  jpeg_component_info *compptr;
X
X  /* Compute maximum sampling factors; check factor validity */
X  cinfo->max_h_samp_factor = 1;
X  cinfo->max_v_samp_factor = 1;
X  for (ci = 0; ci < cinfo->num_components; ci++) {
X    compptr = &cinfo->comp_info[ci];
X    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
X    compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
X      ERREXIT(cinfo->emethods, "Bogus sampling factors");
X    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
X                   compptr->h_samp_factor);
X    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
X                   compptr->v_samp_factor);
X
X  }
X
X  /* Compute logical subsampled dimensions of components */
X  for (ci = 0; ci < cinfo->num_components; ci++) {
X    compptr = &cinfo->comp_info[ci];
X    compptr->true_comp_width = (cinfo->image_width * compptr->h_samp_factor
X                + cinfo->max_h_samp_factor - 1)
X                / cinfo->max_h_samp_factor;
X    compptr->true_comp_height = (cinfo->image_height * compptr->v_samp_factor
X                 + cinfo->max_v_samp_factor - 1)
X                 / cinfo->max_v_samp_factor;
X  }
X}
X
X
X/*
X * This is the main entry point to the JPEG decompressor.
X */
X
X
XGLOBAL void
Xjpeg_decompress (decompress_info_ptr cinfo)
X{
X  /* Init pass counts to 0 --- total_passes is adjusted in method selection */
X  cinfo->total_passes = 0;
X  cinfo->completed_passes = 0;
X
X  /* Read the JPEG file header markers; everything up through the first SOS
X   * marker is read now.  NOTE: the user interface must have initialized the
X   * read_file_header method pointer (eg, by calling jselrjfif or jselrtiff).
X   * The other file reading methods (read_scan_header etc.) were probably
X   * set at the same time, but could be set up by read_file_header itself.
X   */
X  (*cinfo->methods->read_file_header) (cinfo);
X  if (! ((*cinfo->methods->read_scan_header) (cinfo)))
X    ERREXIT(cinfo->emethods, "Empty JPEG file");
X
X  /* Give UI a chance to adjust decompression parameters and select */
X  /* output file format based on info from file header. */
X  (*cinfo->methods->d_ui_method_selection) (cinfo);
X
X  /* Now select methods for decompression steps. */
X  initial_setup(cinfo);
X  d_initial_method_selection(cinfo);
X
X  /* Initialize the output file & other modules as needed */
X  /* (modules needing per-scan init are called by pipeline controller) */
X
X  (*cinfo->methods->output_init) (cinfo);
X  (*cinfo->methods->colorout_init) (cinfo);
X  if (cinfo->quantize_colors)
X    (*cinfo->methods->color_quant_init) (cinfo);
X
X  /* And let the pipeline controller do the rest. */
X  (*cinfo->methods->d_pipeline_controller) (cinfo);
X
X  /* Finish output file, release working storage, etc */
X  if (cinfo->quantize_colors)
X    (*cinfo->methods->color_quant_term) (cinfo);
X  (*cinfo->methods->colorout_term) (cinfo);
X  (*cinfo->methods->output_term) (cinfo);
X  (*cinfo->methods->read_file_trailer) (cinfo);
X
X  (*cinfo->emethods->free_all) ();
X
X  /* My, that was easy, wasn't it? */
X}
END_OF_FILE
  if test 5627 -ne `wc -c <'jdmaster.c'`; then
    echo shar: \"'jdmaster.c'\" unpacked with wrong size!
  fi
  # end of 'jdmaster.c'
fi
if test -f 'jmemdos.h' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'jmemdos.h'\"
else
  echo shar: Extracting \"'jmemdos.h'\" \(5657 characters\)
  sed "s/^X//" >'jmemdos.h' <<'END_OF_FILE'
X/*
X * jmemdos.h  (jmemsys.h)
X *
X * Copyright (C) 1992, Thomas G. Lane.
X * This file is part of the Independent JPEG Group's software.
X * For conditions of distribution and use, see the accompanying README file.
X *
X * This include file defines the interface between the system-independent
X * and system-dependent portions of the JPEG memory manager.  (The system-
X * independent portion is jmemmgr.c; there are several different versions
X * of the system-dependent portion, and of this file for that matter.)
X *
X * This version is suitable for MS-DOS (80x86) implementations.
X */
X
X
X/*
X * These two functions are used to allocate and release small chunks of
X * memory (typically the total amount requested through jget_small is
X * no more than 20Kb or so).  Behavior should be the same as for the
X * standard library functions malloc and free; in particular, jget_small
X * returns NULL on failure.  On most systems, these ARE malloc and free.
X * On an 80x86 machine using small-data memory model, these manage near heap.
X */
X
XEXTERN void * jget_small PP((size_t sizeofobject));
XEXTERN void jfree_small PP((void * object));
X
X/*
X * These two functions are used to allocate and release large chunks of
X * memory (up to the total free space designated by jmem_available).
X * The interface is the same as above, except that on an 80x86 machine,
X * far pointers are used.  On other systems these ARE the same as above.
X */
X
X#ifdef NEED_FAR_POINTERS    /* typically not needed except on 80x86 */
XEXTERN void FAR * jget_large PP((size_t sizeofobject));
XEXTERN void jfree_large PP((void FAR * object));
X#else
X#define jget_large(sizeofobject)    jget_small(sizeofobject)
X#define jfree_large(object)        jfree_small(object)
X#endif
X
X/*
X * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may
X * be requested in a single call on jget_large (and jget_small for that
X * matter, but that case should never come into play).  This macro is needed
X * to model the 64Kb-segment-size limit of far addressing on 80x86 machines.
X * On machines with flat address spaces, any large constant may be used here.
X */
X
X#define MAX_ALLOC_CHUNK        65400L
X
X/*
X * This routine computes the total space available for allocation by
X * jget_large.  If more space than this is needed, backing store will be used.
X * NOTE: any memory already allocated must not be counted.
X *
X * There is a minimum space requirement, corresponding to the minimum
X * feasible buffer sizes; jmemmgr.c will request that much space even if
X * jmem_available returns zero.  The maximum space needed, enough to hold
X * all working storage in memory, is also passed in case it is useful.
X *
X * It is OK for jmem_available to underestimate the space available (that'll
X * just lead to more backing-store access than is really necessary).
X * However, an overestimate will lead to failure.  Hence it's wise to subtract
X * a slop factor from the true available space, especially if jget_small space
X * comes from the same pool.  5% should be enough.
X *
X * On machines with lots of virtual memory, any large constant may be returned.
X * Conversely, zero may be returned to always use the minimum amount of memory.
X */
X
XEXTERN long jmem_available PP((long min_bytes_needed, long max_bytes_needed));
X
X
X/*
X * This structure holds whatever state is needed to access a single
X * backing-store object.  The read/write/close method pointers are called
X * by jmemmgr.c to manipulate the backing-store object; all other fields
X * are private to the system-dependent backing store routines.
X */
X
X#define TEMP_NAME_LENGTH   64    /* max length of a temporary file's name */
X
Xtypedef unsigned short XMSH;    /* type of extended-memory handles */
Xtypedef unsigned short EMSH;    /* type of expanded-memory handles */
X
Xtypedef union {
X    short file_handle;    /* DOS file handle if it's a temp file */
X    XMSH xms_handle;    /* handle if it's a chunk of XMS */
X    EMSH ems_handle;    /* handle if it's a chunk of EMS */
X      } handle_union;
X
Xtypedef struct backing_store_struct * backing_store_ptr;
X
Xtypedef struct backing_store_struct {
X    /* Methods for reading/writing/closing this backing-store object */
X    METHOD(void, read_backing_store, (backing_store_ptr info,
X                      void FAR * buffer_address,
X                      long file_offset, long byte_count));
X    METHOD(void, write_backing_store, (backing_store_ptr info,
X                       void FAR * buffer_address,
X                       long file_offset, long byte_count));
X    METHOD(void, close_backing_store, (backing_store_ptr info));
X    /* Private fields for system-dependent backing-store management */
X    /* For the MS-DOS environment, we need: */
X    handle_union handle;    /* reference to backing-store storage object */
X    char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
X      } backing_store_info;
X
X/*
X * Initial opening of a backing-store object.  This must fill in the
X * read/write/close pointers in the object.  The read/write routines
X * may take an error exit if the specified maximum file size is exceeded.
X * (If jmem_available always returns a large value, this routine can just
X * take an error exit.)
X */
X
XEXTERN void jopen_backing_store PP((backing_store_ptr info,
X                    long total_bytes_needed));
X
X
X/*
X * These routines take care of any system-dependent initialization and
X * cleanup required.  The system methods struct address should be saved
X * by jmem_init in case an error exit must be taken.  jmem_term may assume
X * that all requested memory has been freed and that all opened backing-
X * store objects have been closed.
X * NB: jmem_term may be called more than once, and must behave reasonably
X * if that happens.
X */
X
XEXTERN void jmem_init PP((external_methods_ptr emethods));
XEXTERN void jmem_term PP((void));
END_OF_FILE
  if test 5657 -ne `wc -c <'jmemdos.h'`; then
    echo shar: \"'jmemdos.h'\" unpacked with wrong size!
  fi
  # end of 'jmemdos.h'
fi
if test -f 'jmemsys.h' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'jmemsys.h'\"
else
  echo shar: Extracting \"'jmemsys.h'\" \(5401 characters\)
  sed "s/^X//" >'jmemsys.h' <<'END_OF_FILE'
X/*
X * jmemsys.h
X *
X * Copyright (C) 1992, Thomas G. Lane.
X * This file is part of the Independent JPEG Group's software.
X * For conditions of distribution and use, see the accompanying README file.
X *
X * This include file defines the interface between the system-independent
X * and system-dependent portions of the JPEG memory manager.  (The system-
X * independent portion is jmemmgr.c; there are several different versions
X * of the system-dependent portion, and of this file for that matter.)
X *
X * This is a "generic" skeleton that may need to be modified for particular
X * systems.  It should be usable as-is on the majority of non-MSDOS machines.
X */
X
X
X/*
X * These two functions are used to allocate and release small chunks of
X * memory (typically the total amount requested through jget_small is
X * no more than 20Kb or so).  Behavior should be the same as for the
X * standard library functions malloc and free; in particular, jget_small
X * returns NULL on failure.  On most systems, these ARE malloc and free.
X * On an 80x86 machine using small-data memory model, these manage near heap.
X */
X
XEXTERN void * jget_small PP((size_t sizeofobject));
XEXTERN void jfree_small PP((void * object));
X
X/*
X * These two functions are used to allocate and release large chunks of
X * memory (up to the total free space designated by jmem_available).
X * The interface is the same as above, except that on an 80x86 machine,
X * far pointers are used.  On other systems these ARE the same as above.
X */
X
X#ifdef NEED_FAR_POINTERS    /* typically not needed except on 80x86 */
XEXTERN void FAR * jget_large PP((size_t sizeofobject));
XEXTERN void jfree_large PP((void FAR * object));
X#else
X#define jget_large(sizeofobject)    jget_small(sizeofobject)
X#define jfree_large(object)        jfree_small(object)
X#endif
X
X/*
X * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may
X * be requested in a single call on jget_large (and jget_small for that
X * matter, but that case should never come into play).  This macro is needed
X * to model the 64Kb-segment-size limit of far addressing on 80x86 machines.
X * On machines with flat address spaces, any large constant may be used here.
X */
X
X#define MAX_ALLOC_CHUNK        1000000000L
X
X/*
X * This routine computes the total space available for allocation by
X * jget_large.  If more space than this is needed, backing store will be used.
X * NOTE: any memory already allocated must not be counted.
X *
X * There is a minimum space requirement, corresponding to the minimum
X * feasible buffer sizes; jmemmgr.c will request that much space even if
X * jmem_available returns zero.  The maximum space needed, enough to hold
X * all working storage in memory, is also passed in case it is useful.
X *
X * It is OK for jmem_available to underestimate the space available (that'll
X * just lead to more backing-store access than is really necessary).
X * However, an overestimate will lead to failure.  Hence it's wise to subtract
X * a slop factor from the true available space, especially if jget_small space
X * comes from the same pool.  5% should be enough.
X *
X * On machines with lots of virtual memory, any large constant may be returned.
X * Conversely, zero may be returned to always use the minimum amount of memory.
X */
X
XEXTERN long jmem_available PP((long min_bytes_needed, long max_bytes_needed));
X
X
X/*
X * This structure holds whatever state is needed to access a single
X * backing-store object.  The read/write/close method pointers are called
X * by jmemmgr.c to manipulate the backing-store object; all other fields
X * are private to the system-dependent backing store routines.
X */
X
X#define TEMP_NAME_LENGTH   64    /* max length of a temporary file's name */
X
Xtypedef struct backing_store_struct * backing_store_ptr;
X
Xtypedef struct backing_store_struct {
X    /* Methods for reading/writing/closing this backing-store object */
X    METHOD(void, read_backing_store, (backing_store_ptr info,
X                      void FAR * buffer_address,
X                      long file_offset, long byte_count));
X    METHOD(void, write_backing_store, (backing_store_ptr info,
X                       void FAR * buffer_address,
X                       long file_offset, long byte_count));
X    METHOD(void, close_backing_store, (backing_store_ptr info));
X    /* Private fields for system-dependent backing-store management */
X    /* For a typical implementation with temp files, we might need: */
X    FILE * temp_file;    /* stdio reference to temp file */
X    char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */
X      } backing_store_info;
X
X/*
X * Initial opening of a backing-store object.  This must fill in the
X * read/write/close pointers in the object.  The read/write routines
X * may take an error exit if the specified maximum file size is exceeded.
X * (If jmem_available always returns a large value, this routine can just
X * take an error exit.)
X */
X
XEXTERN void jopen_backing_store PP((backing_store_ptr info,
X                    long total_bytes_needed));
X
X
X/*
X * These routines take care of any system-dependent initialization and
X * cleanup required.  The system methods struct address should be saved
X * by jmem_init in case an error exit must be taken.  jmem_term may assume
X * that all requested memory has been freed and that all opened backing-
X * store objects have been closed.
X * NB: jmem_term may be called more than once, and must behave reasonably
X * if that happens.
X */
X
XEXTERN void jmem_init PP((external_methods_ptr emethods));
XEXTERN void jmem_term PP((void));
END_OF_FILE
  if test 5401 -ne `wc -c <'jmemsys.h'`; then
    echo shar: \"'jmemsys.h'\" unpacked with wrong size!
  fi
  # end of 'jmemsys.h'
fi
if test -f 'jwrppm.c' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'jwrppm.c'\"
else
  echo shar: Extracting \"'jwrppm.c'\" \(4269 characters\)
  sed "s/^X//" >'jwrppm.c' <<'END_OF_FILE'
X/*
X * jwrppm.c
X *
X * Copyright (C) 1991, 1992, Thomas G. Lane.
X * This file is part of the Independent JPEG Group's software.
X * For conditions of distribution and use, see the accompanying README file.
X *
X * This file contains routines to write output images in PPM format.
X * The PBMPLUS library is required (well, it will be in the real version).
X *
X * These routines may need modification for non-Unix environments or
X * specialized applications.  As they stand, they assume output to
X * an ordinary stdio stream.
X *
X * These routines are invoked via the methods put_pixel_rows, put_color_map,
X * and output_init/term.
X */
X
X#include "jinclude.h"
X
X#ifdef PPM_SUPPORTED
X
X
X/*
X * Haven't yet got around to making this work with text-format output,
X * hence cannot handle pixels wider than 8 bits.
X */
X
X#ifndef EIGHT_BIT_SAMPLES
X  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
X#endif
X
X
X/*
X * Write the file header.
X */
X
XMETHODDEF void
Xoutput_init (decompress_info_ptr cinfo)
X{
X  if (cinfo->out_color_space == CS_GRAYSCALE) {
X    /* emit header for raw PGM format */
X    fprintf(cinfo->output_file, "P5\n%ld %ld\n%d\n",
X        cinfo->image_width, cinfo->image_height, 255);
X  } else if (cinfo->out_color_space == CS_RGB) {
X    /* emit header for raw PPM format */
X    fprintf(cinfo->output_file, "P6\n%ld %ld\n%d\n",
X        cinfo->image_width, cinfo->image_height, 255);
X  } else {
X    ERREXIT(cinfo->emethods, "PPM output must be grayscale or RGB");
X  }
X}
X
X
X/*
X * Write some pixel data.
X */
X
XMETHODDEF void
Xput_pixel_rows (decompress_info_ptr cinfo, int num_rows,
X        JSAMPIMAGE pixel_data)
X{
X  register FILE * outfile = cinfo->output_file;
X  register JSAMPROW ptr0, ptr1, ptr2;
X  register long col;
X  register long width = cinfo->image_width;
X  register int row;
X
X  if (cinfo->out_color_space == CS_GRAYSCALE) {
X    for (row = 0; row < num_rows; row++) {
X      ptr0 = pixel_data[0][row];
X      for (col = width; col > 0; col--) {
X    putc(GETJSAMPLE(*ptr0), outfile);
X    ptr0++;
X      }
X    }
X  } else {
X    for (row = 0; row < num_rows; row++) {
X      ptr0 = pixel_data[0][row];
X      ptr1 = pixel_data[1][row];
X      ptr2 = pixel_data[2][row];
X      for (col = width; col > 0; col--) {
X    putc(GETJSAMPLE(*ptr0), outfile);
X    ptr0++;
X    putc(GETJSAMPLE(*ptr1), outfile);
X    ptr1++;
X    putc(GETJSAMPLE(*ptr2), outfile);
X    ptr2++;
X      }
X    }
X  }
X}
X
X
X/*
X * Write some pixel data when color quantization is in effect.
X */
X
XMETHODDEF void
Xput_demapped_rows (decompress_info_ptr cinfo, int num_rows,
X           JSAMPIMAGE pixel_data)
X{
X  register FILE * outfile = cinfo->output_file;
X  register JSAMPARRAY color_map = cinfo->colormap;
X  register JSAMPROW ptr;
X  register long col;
X  long width = cinfo->image_width;
X  int row;
X
X  if (cinfo->out_color_space == CS_GRAYSCALE) {
X    for (row = 0; row < num_rows; row++) {
X      ptr = pixel_data[0][row];
X      for (col = width; col > 0; col--) {
X    putc(GETJSAMPLE(color_map[0][GETJSAMPLE(*ptr)]), outfile);
X    ptr++;
X      }
X    }
X  } else {
X    for (row = 0; row < num_rows; row++) {
X      ptr = pixel_data[0][row];
X      for (col = width; col > 0; col--) {
X    register int pixval = GETJSAMPLE(*ptr);
X
X    putc(GETJSAMPLE(color_map[0][pixval]), outfile);
X    putc(GETJSAMPLE(color_map[1][pixval]), outfile);
X    putc(GETJSAMPLE(color_map[2][pixval]), outfile);
X    ptr++;
X      }
X    }
X  }
X}
X
X
X/*
X * Write the color map.
X * For PPM output, we just demap the output data!
X */
X
XMETHODDEF void
Xput_color_map (decompress_info_ptr cinfo, int num_colors, JSAMPARRAY colormap)
X{
X  cinfo->methods->put_pixel_rows = put_demapped_rows;
X}
X
X
X/*
X * Finish up at the end of the file.
X */
X
XMETHODDEF void
Xoutput_term (decompress_info_ptr cinfo)
X{
X  /* No work except to make sure we wrote the output file OK */
X  fflush(cinfo->output_file);
X  if (ferror(cinfo->output_file))
X    ERREXIT(cinfo->emethods, "Output file write error");
X}
X
X
X/*
X * The method selection routine for PPM format output.
X * This should be called from d_ui_method_selection if PPM output is wanted.
X */
X
XGLOBAL void
Xjselwppm (decompress_info_ptr cinfo)
X{
X  cinfo->methods->output_init = output_init;
X  cinfo->methods->put_color_map = put_color_map;
X  cinfo->methods->put_pixel_rows = put_pixel_rows;
X  cinfo->methods->output_term = output_term;
X}
X
X#endif /* PPM_SUPPORTED */
END_OF_FILE
  if test 4269 -ne `wc -c <'jwrppm.c'`; then
    echo shar: \"'jwrppm.c'\" unpacked with wrong size!
  fi
  # end of 'jwrppm.c'
fi
if test -f 'makcjpeg.cf' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'makcjpeg.cf'\"
else
  echo shar: Extracting \"'makcjpeg.cf'\" \(276 characters\)
  sed "s/^X//" >'makcjpeg.cf' <<'END_OF_FILE'
XL jcmain.mix jcmaster.mix jcdeflts.mix jcarith.mix jccolor.mix jcexpand.mix
XL jchuff.mix jcmcu.mix jcpipe.mix jcsample.mix jfwddct.mix jwrjfif.mix
XL jrdgif.mix jrdppm.mix jrdrle.mix jrdtarga.mix jutils.mix jerror.mix
XL jmemmgr.mix jmemsys.mix jmemdosa.mix
Xfa;
Xb cjpeg,8K,48K,
END_OF_FILE
  if test 276 -ne `wc -c <'makcjpeg.cf'`; then
    echo shar: \"'makcjpeg.cf'\" unpacked with wrong size!
  fi
  # end of 'makcjpeg.cf'
fi
if test -f 'makcjpeg.lst' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'makcjpeg.lst'\"
else
  echo shar: Extracting \"'makcjpeg.lst'\" \(248 characters\)
  sed "s/^X//" >'makcjpeg.lst' <<'END_OF_FILE'
Xjcmain.obj jcmaster.obj jcdeflts.obj jcarith.obj jccolor.obj jcexpand.obj
Xjchuff.obj jcmcu.obj jcpipe.obj jcsample.obj jfwddct.obj jwrjfif.obj
Xjrdgif.obj jrdppm.obj jrdrle.obj jrdtarga.obj jutils.obj jerror.obj
Xjmemmgr.obj jmemsys.obj jmemdosa.obj
END_OF_FILE
  if test 248 -ne `wc -c <'makcjpeg.lst'`; then
    echo shar: \"'makcjpeg.lst'\" unpacked with wrong size!
  fi
  # end of 'makcjpeg.lst'
fi
if test -f 'makdjpeg.lst' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'makdjpeg.lst'\"
else
  echo shar: Extracting \"'makdjpeg.lst'\" \(272 characters\)
  sed "s/^X//" >'makdjpeg.lst' <<'END_OF_FILE'
Xjdmain.obj jdmaster.obj jddeflts.obj jbsmooth.obj jdarith.obj jdcolor.obj
Xjdhuff.obj jdmcu.obj jdpipe.obj jdsample.obj jquant1.obj jquant2.obj
Xjrevdct.obj jrdjfif.obj jwrgif.obj jwrppm.obj jwrrle.obj jwrtarga.obj
Xjutils.obj jerror.obj jmemmgr.obj jmemsys.obj jmemdosa.obj
END_OF_FILE
  if test 272 -ne `wc -c <'makdjpeg.lst'`; then
    echo shar: \"'makdjpeg.lst'\" unpacked with wrong size!
  fi
  # end of 'makdjpeg.lst'
fi
if test -f 'makefile.mc6' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'makefile.mc6'\"
else
  echo shar: Extracting \"'makefile.mc6'\" \(5933 characters\)
  sed "s/^X//" >'makefile.mc6' <<'END_OF_FILE'
X# Makefile for Independent JPEG Group's software
X
X# This makefile is for Microsoft C for MS-DOS, version 6.x (use NMAKE).
X# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd.
X
X# Read SETUP instructions before saying "make" !!
X
X# compiler flags. -D gives a #define to the sources:
X#       -O              default optimisation
X#       -W3             warning level 3
X#       -Za             ANSI conformance, defines __STDC__ but undefines far
X#                       and near, so we DON'T use it.
X#       -DHAVE_STDC     indicate we do have all the ANSI language features
X#       -DINCLUDES_ARE_ANSI    and all the ANSI include files.
X#       -DMSDOS         we are on an MSDOS machine
X#       -DMEM_STATS     enable memory usage statistics (optional)
X#       -c              compile, don't link (implicit in inference rules)
X# You might also want to add -G2 if you have an 80286, etc.
X
XCFLAGS = -c -O -W3 -DHAVE_STDC -DINCLUDES_ARE_ANSI -DMSDOS
X
X
X# source files (independently compilable files)
XSOURCES= jbsmooth.c jcarith.c jccolor.c jcdeflts.c jcexpand.c jchuff.c \
X        jcmain.c jcmaster.c jcmcu.c jcpipe.c jcsample.c jdarith.c jdcolor.c \
X        jddeflts.c jdhuff.c jdmain.c jdmaster.c jdmcu.c jdpipe.c jdsample.c \
X        jerror.c jquant1.c jquant2.c jfwddct.c jrevdct.c jutils.c jmemmgr.c \
X        jrdjfif.c jrdgif.c jrdppm.c jrdrle.c jrdtarga.c jwrjfif.c jwrgif.c \
X        jwrppm.c jwrrle.c jwrtarga.c
X# virtual source files (not present in distribution file)
XVIRTSOURCES= jmemsys.c
X# system-dependent implementations of source files
XSYSDEPFILES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemdos.h \
X        jmemdosa.asm
X# files included by source files
XINCLUDES= jinclude.h jconfig.h jpegdata.h jversion.h jmemsys.h egetopt.c
X# documentation, test, and support files
XDOCS= README SETUP USAGE CHANGELOG cjpeg.1 djpeg.1 architecture codingrules
XMAKEFILES= makefile.ansi makefile.unix makefile.manx makefile.sas \
X        makefile.mc5 makefile.mc6 makcjpeg.lnk makdjpeg.lnk makefile.bcc \
X        makcjpeg.lst makdjpeg.lst makefile.pwc makcjpeg.cf makdjpeg.cf \
X        makljpeg.cf makefile.mms makefile.vms makvms.opt
XOTHERFILES= ansi2knr.c ckconfig.c example.c
XTESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg
XDISTFILES= $(DOCS) $(MAKEFILES) $(SOURCES) $(SYSDEPFILES) $(INCLUDES) \
X        $(OTHERFILES) $(TESTFILES)
X# objectfiles common to cjpeg and djpeg
XCOMOBJECTS= jutils.obj jerror.obj jmemmgr.obj jmemsys.obj jmemdosa.obj
X# compression objectfiles
XCLIBOBJECTS= jcmaster.obj jcdeflts.obj jcarith.obj jccolor.obj jcexpand.obj \
X        jchuff.obj jcmcu.obj jcpipe.obj jcsample.obj jfwddct.obj \
X        jwrjfif.obj jrdgif.obj jrdppm.obj jrdrle.obj jrdtarga.obj
XCOBJECTS= jcmain.obj $(CLIBOBJECTS) $(COMOBJECTS)
X# decompression objectfiles
XDLIBOBJECTS= jdmaster.obj jddeflts.obj jbsmooth.obj jdarith.obj jdcolor.obj \
X        jdhuff.obj jdmcu.obj jdpipe.obj jdsample.obj jquant1.obj \
X        jquant2.obj jrevdct.obj jrdjfif.obj jwrgif.obj jwrppm.obj \
X        jwrrle.obj jwrtarga.obj
XDOBJECTS= jdmain.obj $(DLIBOBJECTS) $(COMOBJECTS)
X# These objectfiles are included in libjpeg.lib
XLIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
X
X
Xall: cjpeg.exe djpeg.exe
X
X# default rules in nmake will use cflags and compile the list below
X
Xjbsmooth.obj : jbsmooth.c jinclude.h jconfig.h jpegdata.h
Xjcarith.obj : jcarith.c jinclude.h jconfig.h jpegdata.h
Xjccolor.obj : jccolor.c jinclude.h jconfig.h jpegdata.h
Xjcdeflts.obj : jcdeflts.c jinclude.h jconfig.h jpegdata.h
Xjcexpand.obj : jcexpand.c jinclude.h jconfig.h jpegdata.h
Xjchuff.obj : jchuff.c jinclude.h jconfig.h jpegdata.h
Xjcmain.obj : jcmain.c jinclude.h jconfig.h jpegdata.h jversion.h egetopt.c
Xjcmaster.obj : jcmaster.c jinclude.h jconfig.h jpegdata.h
Xjcmcu.obj : jcmcu.c jinclude.h jconfig.h jpegdata.h
Xjcpipe.obj : jcpipe.c jinclude.h jconfig.h jpegdata.h
Xjcsample.obj : jcsample.c jinclude.h jconfig.h jpegdata.h
Xjdarith.obj : jdarith.c jinclude.h jconfig.h jpegdata.h
Xjdcolor.obj : jdcolor.c jinclude.h jconfig.h jpegdata.h
Xjddeflts.obj : jddeflts.c jinclude.h jconfig.h jpegdata.h
Xjdhuff.obj : jdhuff.c jinclude.h jconfig.h jpegdata.h
Xjdmain.obj : jdmain.c jinclude.h jconfig.h jpegdata.h jversion.h egetopt.c
Xjdmaster.obj : jdmaster.c jinclude.h jconfig.h jpegdata.h
Xjdmcu.obj : jdmcu.c jinclude.h jconfig.h jpegdata.h
Xjdpipe.obj : jdpipe.c jinclude.h jconfig.h jpegdata.h
Xjdsample.obj : jdsample.c jinclude.h jconfig.h jpegdata.h
Xjerror.obj : jerror.c jinclude.h jconfig.h jpegdata.h
Xjquant1.obj : jquant1.c jinclude.h jconfig.h jpegdata.h
Xjquant2.obj : jquant2.c jinclude.h jconfig.h jpegdata.h
Xjfwddct.obj : jfwddct.c jinclude.h jconfig.h jpegdata.h
Xjrevdct.obj : jrevdct.c jinclude.h jconfig.h jpegdata.h
Xjutils.obj : jutils.c jinclude.h jconfig.h jpegdata.h
Xjmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpegdata.h jmemsys.h
Xjrdjfif.obj : jrdjfif.c jinclude.h jconfig.h jpegdata.h
Xjrdgif.obj : jrdgif.c jinclude.h jconfig.h jpegdata.h
Xjrdppm.obj : jrdppm.c jinclude.h jconfig.h jpegdata.h
Xjrdrle.obj : jrdrle.c jinclude.h jconfig.h jpegdata.h
Xjrdtarga.obj : jrdtarga.c jinclude.h jconfig.h jpegdata.h
Xjwrjfif.obj : jwrjfif.c jinclude.h jconfig.h jpegdata.h
Xjwrgif.obj : jwrgif.c jinclude.h jconfig.h jpegdata.h
Xjwrppm.obj : jwrppm.c jinclude.h jconfig.h jpegdata.h
Xjwrrle.obj : jwrrle.c jinclude.h jconfig.h jpegdata.h
Xjwrtarga.obj : jwrtarga.c jinclude.h jconfig.h jpegdata.h
Xjmemsys.obj : jmemsys.c jinclude.h jconfig.h jpegdata.h jmemsys.h
X
Xjmemdosa.obj : jmemdosa.asm
X    masm /mx $*;
X
X
X# use linker response files because file list > 128 chars
X
Xcjpeg.exe: $(COBJECTS)
X        link /STACK:8192 @makcjpeg.lnk
X
Xdjpeg.exe: $(DOBJECTS)
X        link /STACK:8192 @makdjpeg.lnk
X
Xtest:
X        del testout.*
X        djpeg testorig.jpg testout.ppm
X        djpeg -G testorig.jpg testout.gif
X        cjpeg testimg.ppm testout.jpg
X        fc testimg.ppm testout.ppm
X        fc testimg.gif testout.gif
X        fc testimg.jpg testout.jpg
END_OF_FILE
  if test 5933 -ne `wc -c <'makefile.mc6'`; then
    echo shar: \"'makefile.mc6'\" unpacked with wrong size!
  fi
  # end of 'makefile.mc6'
fi
if test -f 'makefile.pwc' -a "${1}" != "-c" ; then
  echo shar: Will not clobber existing file \"'makefile.pwc'\"
else
  echo shar: Extracting \"'makefile.pwc'\" \(5907 characters\)
  sed "s/^X//" >'makefile.pwc' <<'END_OF_FILE'
X# Makefile for Independent JPEG Group's software
X
X# This makefile is for Mix Software's Power C, v2.1.1
X# and Dan Grayson's pd make 2.14 under MS-DOS.
X# This file assumes that you have Microsoft's MASM or a compatible assembler
X# to handle the jmemdosa.asm file.  If not, you will need to use jmemname.c
X# and go to a large-data memory model.
X# Thanks to Bob Hardy for this version.
X
X# Read SETUP instructions before saying "make" !!
X
X# The name of your C compiler:
XCC=pc
X
X# You may need to adjust these cc options:
XMODEL=m
XCFLAGS= -dMSDOS -m$(MODEL)
X# In particular:
X#   Add -dMEM_STATS to enable gathering of memory usage statistics.
X
X# Link-time cc options:
XLDFLAGS=
XLDLIBS=
X
X# miscellaneous OS-dependent stuff
X# linker
XLN=pcl
X# file deletion command
XRM=del
X# library (.mix) file creation command
XAR=merge
X
X
X# source files (independently compilable files)
XSOURCES= jbsmooth.c jcarith.c jccolor.c jcdeflts.c jcexpand.c jchuff.c jcmain.c jcmaster.c jcmcu.c jcpipe.c jcsample.c jdarith.c jdcolor.c jddeflts.c jdhuff.c jdmain.c jdmaster.c jdmcu.c jdpipe.c jdsample.c jerror.c jquant1.c jquant2.c jfwddct.c jrevdct.c jutils.c jmemmgr.c jrdjfif.c jrdgif.c jrdppm.c jrdrle.c jrdtarga.c jwrjfif.c jwrgif.c jwrppm.c jwrrle.c jwrtarga.c
X# virtual source files (not present in distribution file)
XVIRTSOURCES= jmemsys.c
X# system-dependent implementations of source files
XSYSDEPFILES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemdos.h jmemdosa.asm
X# files included by source files
XINCLUDES= jinclude.h jconfig.h jpegdata.h jversion.h jmemsys.h egetopt.c
X# documentation, test, and support files
XDOCS= README SETUP USAGE CHANGELOG cjpeg.1 djpeg.1 architecture codingrules
XMAKEFILES= makefile.ansi makefile.unix makefile.manx makefile.sas makefile.mc5 makefile.mc6 makcjpeg.lnk makdjpeg.lnk makefile.bcc makcjpeg.lst makdjpeg.lst makefile.pwc makcjpeg.cf makdjpeg.cf makljpeg.cf makefile.mms makefile.vms makvms.opt
XOTHERFILES= ansi2knr.c ckconfig.c example.c
XTESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg
XDISTFILES= $(DOCS) $(MAKEFILES) $(SOURCES) $(SYSDEPFILES) $(INCLUDES) $(OTHERFILES) $(TESTFILES)
X# objectfiles common to cjpeg and djpeg
XCOMOBJECTS= jutils.mix jerror.mix jmemmgr.mix jmemsys.mix jmemdosa.mix
X# compression objectfiles
XCLIBOBJECTS= jcmaster.mix jcdeflts.mix jcarith.mix jccolor.mix jcexpand.mix jchuff.mix jcmcu.mix jcpipe.mix jcsample.mix jfwddct.mix jwrjfif.mix jrdgif.mix jrdppm.mix jrdrle.mix jrdtarga.mix
XCOBJECTS= jcmain.mix $(CLIBOBJECTS) $(COMOBJECTS)
X# decompression objectfiles
XDLIBOBJECTS= jdmaster.mix jddeflts.mix jbsmooth.mix jdarith.mix jdcolor.mix jdhuff.mix jdmcu.mix jdpipe.mix jdsample.mix jquant1.mix jquant2.mix jrevdct.mix jrdjfif.mix jwrgif.mix jwrppm.mix jwrrle.mix jwrtarga.mix
XDOBJECTS= jdmain.mix $(DLIBOBJECTS) $(COMOBJECTS)
X# These objectfiles are included in libjpeg.mix
XLIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
X
X
Xall: cjpeg.exe djpeg.exe
X# By default, libjpeg.mix is not built unless you explicitly request it.
X# You can add libjpeg.mix to the line above if you want it built by default.
X
X
Xcjpeg.exe: $(COBJECTS)
X    $(LN) $(LDFLAGS) @makcjpeg.cf
X
Xdjpeg.exe: $(DOBJECTS)
X    $(LN) $(LDFLAGS) @makdjpeg.cf
X
X# libjpeg.mix is useful if you are including the JPEG software in a larger
X# program; you'd include it in your link, rather than the individual modules.
Xlibjpeg.mix: $(LIBOBJECTS)
X    @$(RM) libjpeg.mix
X    $(AR) libjpeg.mix @makljpeg.cf
X
Xclean:
X    $(RM) *.mix cjpeg.exe djpeg.exe testout.*
X
Xtest:
X    @$(RM) testout.*
X    +djpeg testorig.jpg testout.ppm
X    +djpeg -G testorig.jpg testout.gif
X    +cjpeg testimg.ppm testout.jpg
X    fc testimg.ppm testout.ppm
X    fc testimg.gif testout.gif
X    fc testimg.jpg testout.jpg
X
X
Xjbsmooth.mix : jbsmooth.c jinclude.h jconfig.h jpegdata.h
Xjcarith.mix : jcarith.c jinclude.h jconfig.h jpegdata.h
Xjccolor.mix : jccolor.c jinclude.h jconfig.h jpegdata.h
Xjcdeflts.mix : jcdeflts.c jinclude.h jconfig.h jpegdata.h
Xjcexpand.mix : jcexpand.c jinclude.h jconfig.h jpegdata.h
Xjchuff.mix : jchuff.c jinclude.h jconfig.h jpegdata.h
Xjcmain.mix : jcmain.c jinclude.h jconfig.h jpegdata.h jversion.h egetopt.c
Xjcmaster.mix : jcmaster.c jinclude.h jconfig.h jpegdata.h
Xjcmcu.mix : jcmcu.c jinclude.h jconfig.h jpegdata.h
Xjcpipe.mix : jcpipe.c jinclude.h jconfig.h jpegdata.h
Xjcsample.mix : jcsample.c jinclude.h jconfig.h jpegdata.h
Xjdarith.mix : jdarith.c jinclude.h jconfig.h jpegdata.h
Xjdcolor.mix : jdcolor.c jinclude.h jconfig.h jpegdata.h
Xjddeflts.mix : jddeflts.c jinclude.h jconfig.h jpegdata.h
Xjdhuff.mix : jdhuff.c jinclude.h jconfig.h jpegdata.h
Xjdmain.mix : jdmain.c jinclude.h jconfig.h jpegdata.h jversion.h egetopt.c
Xjdmaster.mix : jdmaster.c jinclude.h jconfig.h jpegdata.h
Xjdmcu.mix : jdmcu.c jinclude.h jconfig.h jpegdata.h
Xjdpipe.mix : jdpipe.c jinclude.h jconfig.h jpegdata.h
Xjdsample.mix : jdsample.c jinclude.h jconfig.h jpegdata.h
Xjerror.mix : jerror.c jinclude.h jconfig.h jpegdata.h
Xjquant1.mix : jquant1.c jinclude.h jconfig.h jpegdata.h
Xjquant2.mix : jquant2.c jinclude.h jconfig.h jpegdata.h
Xjfwddct.mix : jfwddct.c jinclude.h jconfig.h jpegdata.h
Xjrevdct.mix : jrevdct.c jinclude.h jconfig.h jpegdata.h
Xjutils.mix : jutils.c jinclude.h jconfig.h jpegdata.h
Xjmemmgr.mix : jmemmgr.c jinclude.h jconfig.h jpegdata.h jmemsys.h
Xjrdjfif.mix : jrdjfif.c jinclude.h jconfig.h jpegdata.h
Xjrdgif.mix : jrdgif.c jinclude.h jconfig.h jpegdata.h
Xjrdppm.mix : jrdppm.c jinclude.h jconfig.h jpegdata.h
Xjrdrle.mix : jrdrle.c jinclude.h jconfig.h jpegdata.h
Xjrdtarga.mix : jrdtarga.c jinclude.h jconfig.h jpegdata.h
Xjwrjfif.mix : jwrjfif.c jinclude.h jconfig.h jpegdata.h
Xjwrgif.mix : jwrgif.c jinclude.h jconfig.h jpegdata.h
Xjwrppm.mix : jwrppm.c jinclude.h jconfig.h jpegdata.h
Xjwrrle.mix : jwrrle.c jinclude.h jconfig.h jpegdata.h
Xjwrtarga.mix : jwrtarga.c jinclude.h jconfig.h jpegdata.h
Xjmemsys.mix : jmemsys.c jinclude.h jconfig.h jpegdata.h jmemsys.h
Xjmemdosa.mix : jmemdosa.asm
X    masm /mx jmemdosa;
X    mix jmemdosa.obj
END_OF_FILE
  if test 5907 -ne `wc -c <'makefile.pwc'`; then
    echo shar: \"'makefile.pwc'\" unpacked with wrong size!
  fi
  # end of 'makefile.pwc'
fi
echo shar: End of archive 17 \(of 18\).
cp /dev/null ark17isdone
MISSING=""
for I in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ; do
    if test ! -f ark${I}isdone ; then
    MISSING="${MISSING} ${I}"
    fi
done
if test "${MISSING}" = "" ; then
    echo You have unpacked all 18 archives.
    rm -f ark[1-9]isdone ark[1-9][0-9]isdone
else
    echo You still must unpack the following archives:
    echo "        " ${MISSING}
fi
exit 0
exit 0 # Just in case...