home *** CD-ROM | disk | FTP | other *** search
-
- This is the Voxware soundcard drivers version 2.90-2 for
- SCO OpenServer Release 5.
-
- This version is the ALPHA test version of the sound drivers for SCO.
- Beware of unexpected results. In any case make sure you can trust your
- backups before testing this stuff...
-
- Please send problem reports to Shawn McMurdo (shawnm@sco.com).
- The principal author of the Voxware drivers is Hannu Savolainen
- (hannu@voxware.pp.fi). See the file COPYING for copyright info.
- This driver is based on the Voxware 2.90-2 source, which is
- available at sunsite.unc.edu and other Linux archive sites.
-
- usr/bin/mixer is a command line app for querying and setting mixer line
- levels.
-
- Installation
- ------------
-
- 1) Login as root on the console. Make sure other users have
- logged off the system.
-
- 2) Extract the tar file into the root directory.
-
- 3) Run mkdev audio. This will give you the rest of the installation
- instructions.
-
- -----------------------------------------
-
- Support for the following cards is compiled in to the Voxware drivers
-
- Creative Labs SoundBlaster
- Creative Labs SoundBlaster Pro
- Creative Labs SoundBlaster 16
- Creative Labs SoundBlaster MIDI Port
- MediaVision ProAudioSpectrum
- MediaVision ProAudioSpectrum 16
- Advanced Gravis UltraSound
- Advanced Gravis UltraSound 16 bit recording daughterboard
- Microsoft Sound System
- Yamaha OPL-2/OPL-3 FM Synth Chips (found on Adlib, SB, SBPro, SB16, PAS,
- PAS16)
-
-
- Support for the following is not currently compiled in but is planned for
- Voxware 3.0:
-
- Roland MPU-401 MIDI
- UART6850 MIDI (MPU-401 dumb mode compatible)
- Echo Personal Sound System (based on Analog Devices chips and should work
- with cards by Orchid, Cardinal, Western Digital, etc.)
- Advanced Gravis UltraSound MAX
-
- -----------------------
-