QBasic & Borland Pascal & C

home *** CD-ROM | disk | FTP | other *** search

/ QBasic & Borland Pascal & C / Delphi5.iso / Pascal / BPASCAL.700 / D12 / TDDOC.ZIP / README.TD < prev next >

Wrap

Text File | 1992-10-01 | 20.7 KB | 491 lines

TURBO DEBUGGER/PROFILER/ASSEMBLER RELEASE NOTES ----------------------------------------------- This file contains important, last-minute information about Turbo Debugger, Turbo Profiler, and Turbo Assembler. TABLE OF CONTENTS ----------------- 1. Debugging Multiple Applications under Turbo Debugger for Windows 2. TDW.INI, the Windows initialization file for TDW and TPROFW 3. Using TDW in Dual Monitor Mode from TPW 4. Using TDW in Dual Monochrome Monitor Mode 5. The [WRemote] section of TDW.INI 6. Known Problems 1. Debugging Multiple Applications under Turbo Debugger for Windows =================================================================== You can debug multiple applications under TDW as follows: 1. Load the first program to be debugged into TDW. 2. Once the application is loaded, press the F3 key to display the Load Module Source or DLL Symbols dialog box. 3. In the DLL Name text entry box, enter the name of the .EXE or DLL to add. If the .EXE or DLL resides in another directory, you need to provide the full path. 4. Press the Enter key. TDW adds the program name to the DLLs & Programs list box and puts the !! symbol after it. 5. Close the Load Module Source or DLL dialog box, return to the Module window, and set any necessary breakpoints in the first program. 6. Press F9 to run the first program. 7. Switch to the Windows Program Manager while the first program is running and run the second program in the usual way. 8. You see the display switch back to TDW with the CPU window showing the start-up information of the second application. Close the CPU window. 9. In the Module window, set any necessary breakpoints in the second application, then press the F9 key to run it. This method is useful for debugging DDE conversations or any other inter-program communication in the Windows environment. 2. TDW.INI, the Windows initialization file for TDW and TRPOFW ============================================================== TDW.INI is located in your local Windows directory. It is the Windows initialization file used by TDW, TPROFW, and WREMOTE. TDW.INI specifies the name and location of the Debugger DLL and the video driver DLL (if any) in the [TurboDebugger] section. It can also contain two other sections: o [VideoOptions], where you put settings for the video DLL, if any o [WRemote], where WRSETUP puts settings for remote debugging and profiling [TurboDebugger] section ----------------------- WINDEBUG.DLL has been replaced by TDWIN.DLL. TDWIN.DLL can be located anywhere you wish (usually the main Windows directory). The DebuggerDLL entry must specify the full path to TDWIN.DLL. For example, if TDWIN.DLL is in the WINDOWS3.1 directory, its TDW.INI entry is [TurboDebugger] DebuggerDLL=c:\windows3.1\tdwin.dll The VideoDLL entry indicates a video support DLL for 8514 or Super VGA, because TDW doesn't support these video modes by default. This entry must specify the full path to the DLL. You can set various video options for the DLL in the [VideoOptions] section. See the next section for a complete explanation of video DLL and options settings. SVGA support, the VideoDLL entry, and the [VideoOptions] section ---------------------------------------------------------------- TDW and TPROFW handle most of the popular 2, 4, 16, and 256-color high-resolution Super VGA modes. If your card isn't supported correctly, you need to use a special Super VGA (SVGA) DLL. Currently, six DLLs are supplied with your language compiler to support various SVGA and 8514 video cards and modes. These DLLs are described in the next section. For information on how to specify the Video DLL or its options, see the sections "The VideoDLL entry" and "The [VideoOptions] section," which follow the "Video DLLs" section. Video DLLs ---------- All the video DLLs described in this section are designed to work with the most current Windows screen drivers for your video card. If you're not sure if you're using the latest drivers, contact your video card manufacturer for more information. From time to time we have new DLLs for new video cards. These DLLs, when available, can be downloaded from Compuserve, BIX, GEnie, and our local BBS (408-439-9096). As new video cards and modes appear on the market, we will be creating new DLLs for them. If the card you use isn't supported by one of our DLLs, please contact Tech Support for the latest video DLL information. Our main Tech Support phone number is 408-438-5300. ATI.DLL ------- Works with the ATI VGA Wonder and XL cards in certain video modes. The latest ATI Drivers from ATI Technologies Inc. require the following TDW.INI file entries: Resolution ATI.DLL Int2FAssist ----------------------------------- | 640X480 | Yes | Yes | ----------------------------------- | 800X600 | Yes | Yes | ----------------------------------- | 1024X768 | No | No | ----------------------------------- EXPLANATION: ATI.DLL is required in all video modes except 1024 X 768 (this mode is directly supported by TDW and TPROFW). When the DLL is used (VideoDLL=ATI.DLL), Int2FAssist should be set to "yes" in the [VideoOptions] section. TSENG.DLL --------- Supports TSENG ET-3000 /ET-4000 based cards in certain video modes. The latest TSENG drivers are available from the Microsoft Windows Driver Library on Comp-U-Serve. They require the following TDW.INI file settings: Resolution TSENG.DLL Int2FAssist ------------------------------------- | 640X480 | Yes | Yes | ------------------------------------- | 800X600 | No | No | ------------------------------------- | 1024X768 | No | No | ------------------------------------- EXPLANATION: TSENG.DLL should only be used with 640 X 480 X 256 resolution (set VideoDLL=TSENG.DLL and put a Int2FAssist="Yes" entry in the [VideoOptions] section). TDW and TPROFW directly support the other TSENG resolutions. TDVESA.DLL ---------- Supports any video card that does VESA emulation, whether through a TSR or video card firmware. Use this DLL with all resolution settings. NOTE: You can run VESATEST.EXE from either DOS or Windows to see if your system provides the proper VESA functions. If the emulation is not loaded, TDW (or TPROFW) will display an error message indicating that the video DLL is not supported by the current configuration. The TDVESA.DLL has been tested with the following video cards: o Video Seven VRAM II--uses V7VESA TSR supplied with card o Weitek Power Windows--emulates VESA with firmware. DUAL8514.DLL ------------- Supports any dual-screen 8514 cards. This DLL is only for systems that have two-color monitors, one attached to the VGA card and one attached to the 8415/A card. It speeds up performance by preventing TDW (or TPROFW) from doing some things that aren't required in dual-monitor mode. NOTE: Using this DLL is not the same as invoking TDW with the -do parameter, which only specifies using a monochrome screen. STB.DLL ------- Supports the MVP2 series of multi-screen video cards. ULTRA.DLL --------- Supports the ATI 8514 Ultra and Vantage graphics cards (8514/Ultra, 8514/Vantage, Graphics/Ultra, and Graphics/Vantage) and 8514-based cards configured for a single monitor (including the IBM 8514/A card). If you use this DLL with an IBM 8514/A card, set "ATI=no" in the [VideoOptions] section of TDW.INI. The VideoDLL entry ------------------ To use an SVGA DLL, simply edit the TDW.INI file that the installation program puts in your main Windows directory. You can modify TDW.INI with any ASCII text editor. Under the section heading [TurboDebugger] there is an option called "VideoDLL". This entry should equal the path and filename of the DLL you want to use for SVGA support (see the example later in this file). If there is an error loading the DLL or if the DLL doesn't support the selected card or mode, TDW (or TPROFW) reports the error in a Windows dialog box. When this happens, TDW (or TPROFW) unloads it and exits. If this situation occurs, remove the DLL's name from the VideoDLL line in the TDW.INI file or select a video mode supported by that DLL. The [VideoOptions] section -------------------------- There are also options you can set for the current video DLL. You list these options under the [VideoOptions] heading in any order you like. The following list shows all the video options: o SaveWholeScreen -- default = no o Int2FAssist -- default = no o DebugFile -- default = <blank> o IgnoreMode -- default = no o ATI -- default = yes o Rows -- default = 25 o RestoreTextScreen -- default = yes DebugFile can be either blank or set to a specific filename. The other four settings must be either 'yes' or 'no'. Rows must be 25 or 50. SaveWholeScreen (ATI, TSENG, TDVESA) --------------- This option, normally set to "no", determines whether the entire screen (512k - 64k from 8 planes) is saved (the entire graphics screen is cleared when switching to it) or if only the top 32K of planes 0 through 3 is saved (the entire screen is NOT cleared when switching modes.) Saving the whole screen is not usually necessary, but is provided in case you're using a nonstandard card that requires that the whole screen be saved. It also provides support for the Alt-F5 key combination under the Int2FAssist mode. Int2FAssist (ATI, TSENG) ----------- This option, normally set to "no", tells the DLL to make a special Int 2F call before switching video modes. This call tells the current Windows screen driver what's happening. The desired effect of this call is to make Windows tell all of its child windows to repaint themselves. This option is provided mainly to support some ATI Wonder and TSENG chip set video modes. DebugFile (ALL DLLs) --------- The video DLL normally doesn't log any debugging information. If you're having problems using a particular DLL, you can use the DebugFile option to specify the path and filename of a log file. You can use the information logged to this file if you need to contact Borland's Technical Support. The information logged is: o the date and time you ran TDW or TPROFW o the version & location of the DLL o the name of the current Windows screen driver o the state of all TDW.INI options o a listing of all calls and parameters to the DLL's functions IgnoreMode (ATI, TSENG) ---------- This option only applies when the video DLL is ATI.DLL or TSENG.DLL. It tells the DLL to not do any mode or card checking and to force the Int2FAssist option on. This option is useful for cards that aren't directly supported by an official DLL yet, such as Paradise, Video-7, Trident, or any other video card without a graphics coprocessor. With this option enabled, the functionality is identical to the temporary ALL.DLL that we offered in the past. ATI (ULTRA) --- This option is only used by ULTRA.DLL and is on by default. If you disable it (ATI=no), you can use ULTRA.DLL on regular IBM 8514/A cards. ROWS (ALL DLLs) ---- This option is only used if you use a configuration file to set the number of rows to 43/50 from 25. If you choose to have TDW start in 50-line mode, set the Rows option to 50 in the TDW.INI file. RestoreTextScreen (DUAL8514, STB) ----------------- This option is only valid with the DUAL8514 and STB DLLs. The valid options are: o Yes - restores TDW's (or TPROFW's) screen after exiting. o No - does not touch TDW's (or TPROFW's) screen at all. o Clear - forces the screen to clear upon exiting TDW (or TPROFW). Video DLL example ----------------- If you have an ATI VGA Wonder card and you want it to save the entire screen and log information to a file named C:\WINDOWS\TDVIDEO.LOG, the TDW.INI file will look something like this: [TurboDebugger] DebuggerDLL=c:\windows3.1\tdwin.dll VideoDLL=c:\bp\bin\ati.dll [VideoOptions] SaveWholeScreen=yes DebugFile=c:\windows\tdvideo.log Technical information --------------------- TDW, upon loading, looks for the video DLL in the following locations in the following order: 1. The same directory TDW (or TPROFW) is running from 2. The Windows main directory 3. The location specified in TDW.INI If it finds the file, TDW (or TPROFW) accesses the DLL as needed. TDW (or TPROFW) makes calls to the DLL to handle the entire video screen-switching context. The DLL accomplishes the screen switching by allocating a buffer as it gets loaded. Graphics screen contents are then saved to this buffer when TDW (or TPROFW)_enters text mode. The DLL restores the graphics screen from this buffer when TDW (or TPROFW) exits text mode. Memory allocated for the buffer is freed when the DLL is unloaded. Seeing the user screen of an application ---------------------------------------- Some video modes might require some special handling. The Int2FAssist option allows these modes to work correctly on most systems. The behavior is as follows: When you set "Int2FAssist=yes", the DLL informs Windows to tell all sub-windows on the screen to repaint themselves while the user application is running. This allows the user screen to be viewed when stepping, tracing, or running your application. It will not, however, switch to the user screen when you press the Alt-F5 key combination because TDW is still in control (TDW doesn't allow Windows to process any messages at this point.) If you also set "SaveWholeScreen=yes", pressing the Alt-F5 key combination shows the user screen. (The DLL will now copy the screen back for you.) The drawback to enabling SaveWholeScreen is that it will take longer to step or trace if TDW needs to switch back to the user screen for that particular instruction. Also, extra messages will be passed to your application that normally wouldn't be passed. This may affect the debugging of certain pieces of code (like finding a bug in an owner-draw control). In these cases, you won't want to use this option on the current video mode. 3. Using TDW in Dual Monitor Mode from TPW ========================================== If you run TDW from TPW, you can use dual monitor mode only if you add the following section to your TPW.INI file: [Debugger] ExePath=c:\tpw\ Switches=-do 4. Using TDW in Dual Monitor Monochrome Mode ============================================ If TDW is activated using the -do switch, there is no need for a value in the VideoDLL entry of TDW.INI. The VideoDLL entry should be empty, as follows: [Debugger] VideoDLL= 5. The [WRemote] section of TDW.INI =================================== If you run WRSETUP to configure WREMOTE, the settings are saved in the WRemote section of TDW.INI. In previous versions, these settings were saved in the WRemote section of WREMOTE.INI. If you have a previous version of TDW or TPROFW and want to preserve your WREMOTE settings, you can append the contents of WREMOTE.INI into TDW.INI. Be sure to include the [WRemote] section heading. The settings for the [WRemote] section are described in the "Turbo Debugger User's Guide" in Appendix E, "Remote Debugging". 6. Known Problems ================= o The MEMPAGE segment attribute in TASM is not currently supported by TLINK. This option was added to TASM to support a feature of the Phar Lap linker. o TD386 and TF386 currently do not support machines with over 16M of memory. You must disable any extra memory to use these programs. o Some mouse drivers are incompatible with TD and will cause the mouse cursor to get scrambled when debugging DOS graphics applications on a second monitor (-do option). If that happens, you can try a different driver or turn off the mouse in TD by using the -p- option on the TD command line. The mouse will still be active in the target application. o If you have any lines in your SYSTEM.INI that rename DLLs, such as "sound.dll=mysound.drv", TDW might display the error "Can't find sound.dll" when it loads a program that uses the DLL. To solve this problem, use the -wd command switch to disable TDW's DLL checking when you load such a program. o The first time a program is run under TDW or TPROFW, mouse messages are processed normally. However, on every subsequent execution of that program, you must press a key on the keyboard before mouse messages can be processed. o TSENG ET-4000 video chip set problems Under Windows 3.1, if you use the standard Windows VGA or SuperVga driver with a video card that uses the TSENG ET-4000 chip set, you might encounter a number of problems with running the debugger on a single monitor. - The hardware cursor (the white cursor displayed in all dialog boxes that require text input) is invisible, but you can still debug your program. - On certain TSENG 4000-based cards (such as the Diamond Speedstar VGA card), when you launch TDW the default character set is replaced by graphic characters. To overcome this problem, contact Microsoft Corp and ask for the updated TSENG drivers that were not shipped with Windows 3.1. They are also available on CompuServe in the Microsoft Forum (GO MSOFT) under the Microsoft Software Library heading. The drivers are Filename Date -------- ---- TSENG1.EXE 4/6/92 TSENG2.EXE 4/6/92 TSENG3.EXE 4/6/92 TSENG4.EXE 4/6/92 In the meantime, you can use one of the following alternatives: o Run Windows Setup and replace your Windows 3.1 VGA or SVGA driver with the Version 3.0 VGA driver supplied with Windows 3.1. o Start TDW from the DOS command line. For example, WIN TDW myprog o Each time you launch Windows, run a full screen DOS session and type "exit" to close it. After you do this, when you run TDW, it will use the correct character set.