151 %s\n\nThis file already exists, do you want to replace this file ?
152 &Save
153 Save changes to %s?
154 Save changes to Untitled?
155 Programmer Studio is unable to insert any further lines at the current insertion point as there are no further line numbers in the sequence available.\n\nPlease renumber a range of lines or the entire file and try again.
156 Compile
157 Find in Files
158 Breakpoints
159 Watch Variables
160 Connections
161 Call Stack
162 Local Variables
163 DOS,Mac,Unix
164 &Properties...
165 Content
166 Display
167 All windows,Source window,Output windows,Terminal window
201 Are you sure you want to remove '%s' from the current project?
202 Save Project
203 You have made changes to the project '%s'.\n\nDo you want to save these changes?
204 Error Detection
205 File Type
206 Custom Compile
207 <p>
208 <d>
209 <f>
210 <b>
211 <e>
212 <t>
213 <mp>
214 <md>
215 <pn>
216 <l>
217 <ln>
218 Guide Lines
219 Target
220 General,Advanced
221 Debug
222 Select Target
223 Select Folder
224 Browse
225 Locals
226 Typically files opened in the Hex editor should be transferred as Binary. Files transferred as ASCII will add line break sequences which may not be part of the file.\n\nWould you like to transfer this file as binary ?
227 Void Text
228 Build
229 Checking directory '%s'...
230 Checking file '%s'...
231 Not selected
232 &Embedded %s
233 The length of line %ld exceeds the current file MPE record length of %ld.\n\nDo you want to increase the record length of the file to %ld?
234 Network Trace
235 <none> - Use file extensions
236 Find in Files
237 Robell Qedit«
238 File Access
239 FTP,Telnet,WTRSH,HPe3000
240 Rules
241 Programs
242 Bracket Highlight
243 Watch
244 This feature is not currently support on block mode selections.
245 Default,Ascii,Binary
246 Difference %d of %d
247 The following files are identical based on the compare settings:-\n\n%s\n%s
248 You are on day %d of your %d day evaluation period.\n\nWelcome to Programmer Studio. This software is fully functional and is supplied for 30 days evaluation. Pricing and ordering details can be found by clicking Buy Now or from the Help menu.
249 YOU ARE ON DAY %d OF YOUR %d DAY EVALUATION PERIOD.\n\nAs your evaluation period has expired, this reminder will be displayed every %d minutes. If you wish to continue using Programmer Studio please order as soon as possible. Pricing and ordering details can be found by clicking Buy Now or from the Help menu.
250 Programmer Studio BETA release - This version will expire in %d days.\n\nIMPORTANT: Please ensure you have adequate copies of ALL of your existing files BEFORE testing this release. This software is fully functional and is supplied for test purposes only. Please send all feedback to support@programmerstudio.com.
251 Thank you for BETA testing Programmer Studio.\n\nThe BETA test period of this version has expired. If you wish to test a later version of Programmer Studio please visit www.programmerstudio.com for more information.
252 You have %d days remaining in your extended evaluation period.\n\nWelcome to Programmer Studio. This software is fully functional and is supplied for 30 days evaluation. Pricing and ordering details can be found by clicking Buy Now or from the Help menu.
253 File Compare
254 <none>,Microsoft FC,GNU DIFF (or compatible)
255 Output
256 &Continue
257 &Start Debugging
258 %s Breakpoints
259 Input
260 User
261 Page Setup
262 Find Results
263 Are you sure you want to remove trailing tabs and spaces from every line in the file?
264 <l>
265 <ln>
266 <p>
267 <mln>
268 <mp>
269 ClassView
270 Copyright ⌐1997-2001 Whisper Technology Limited. All rights reserved.\nThis program is protected by copyright law and international treaties. Unauthorized reproduction or distribution of this program, or any part of it, may result in severe criminal and civil penalties.
271 Selection Margin
272 (Empty)
273 Programs,Embedded Language,MPE Build Parms
274 Tools
275 Toolbars
276 ---- Separator ----
277 Class Drop-Down
278 Ready
279 Telnet Session Wizard
280 Add Server Wizard
281 AutoText
282 %s\n\nThis project was created with a previous version of Programmer Studio. Continuing will start the Import Project Wizard which will take you trhough the steps required to convert this file into the new project format.\n\nDo you want to convert this project ?
283 Settings for %s...
284 &Compile
285 General,Advanced
286 Build
287 Modified line
288 Modified Markers
289 Remove
290 Find in Files...
300 Error %d, unable to load preferences from the following file: \n\n%s\n\nPlease check that the file exists and is not corrupted.\nAre you sure you want to start Programmer Studio?
301 Error %d, unable to save preferences to the following file: \n\n%s\n\nPlease check that the file is not in use and you have permission to create the file.
302 Error %d, unable to load the following file:\n\n%s\n\nPlease check that the file exists, is not in use and you have permission to open the file.
303 Error %d, unable to load the following file:\n\n%s\n\nThis may be due to lack of memory or system resources.
304 Error %d, unable to load Programmer Studio.\n\nThis may be due to lack of memory or system resources. Close one or more applications and try again.
305 Error %d, unable to connect to the following server:\n\n%s, port %d\n\nPlease check the host name and port number are correct and try again.
306 Error %d, unable to login to the following server:\n\n%s\n\nPlease check the user name and/or password are correct and try again.
307 %s\n\nFile not found.\nPlease verify that the path and file name are correct.
308 %s\n\nFile no longer exists.\nThis file appears to have been deleted since it was originally opened.
309 %s\n\nFile has been been changed since it was opened.
310 Error %d, unable to browse to the following folder:\n\n%s\n\nPlease check the server profile and try again.
311 Error %d, unable to connect to the following server:\n\n%s\n\nPlease check the host name and port number in the server profile are correct and try again.
312 Are you sure you want to remove the server profile '%s' ?\n\nExisting connections using this server profile will not be able to reconnect\nafter disconnecting.
313 Error %d%03d, unable to load the server profiles from the following file: \n\n%s\n\nPlease check that the file exists and is not corrupted.
314 %s\n\nServer profile not found.\nPlease verify that the path and file name are correct.
315 Error %d, unable to find the following file:\n\n%s\n\nPlease verify that the path and file name are correct.
316 Cannot find the following string\n\n%s\n\nThis string may be found if you modify the find\noptions, match case, whole word only, etc.
317 Are you sure you want to remove the file type '%s' ?\n\nAny open files which use this file type will not be affected.
318 Error %d, unable to save the following file:\n\n%s\n\nPlease check that the file is not in use and you have permission to create the file.
319 FTP error %d\nWSA error %d\nSockets %s
320 Error %d, unable to resolve the following file or folder.\n\n%s\n\nPlease verify the path and filename are correct.
321 Error %d (%d), unable to load compiler information from the following file: \n\n%s\n\nPlease check that the file exists and is not corrupted.
322 The length of line %d overlaps the COBOL token position of 72.\n\nThis file cannot be saved until the length of this line is reduced\nor the file is saved in an alternate format.
323 The length of line %d exceeds the maximum line length specified for this file type.\n\nAre you sure you want to save this file ?
324 Error -1, unable to create session window.\n\nThis may be due to lack of memory or system resources.
325 The specified renumber range is not valid.
326 The specified renumber sequence is not valid.
327 The length of line %d overlaps the line number position of %d.\n\nThis file cannot be saved until the length of this line is reduced.
328 Error resolving the specified location for recovery files, auto-recovery has been disabled.\n\nPlease check that the directory '%s' exists and you have permission to access it.
329 Error %d, unable to create recovery copy for the file:\n\n%s
330 One or more files have been recovered from a previous Programmer Studio session. these files will be loaded.\n\nTo abandon these file simply close each file without saving.
331 This BETA version of Programmer Studio 4 has expired. Please contact Whisper Technology for a more recent BETA.\n\nAlternatively visit www.whispertech.com
332 The format of the search criteria is not in HEX format.\n\n%s\n\nCriteria for a HEX search must be in the following format:\n\n3F 0A 0D 40...
334 Unable to load the following project file:\n\n%s\n\nPlease check that the file exists, is a valid Programmer Studio project file and is not already open by someone else.
335 Error %d starting drag-and-drop.\n\nIf this problem persists please contact Technical Support.
336 Cannot compile '%s'; the compiler specified '%s' is not recognised.\n\nPlease check your project settings.
337 Cannot compile '%s'; no compiler has been specified for this file.\n\nPlease check your project settings.
338 Unable to reload the specified file:\n\n%s\n\nFile has been been changed since it was opened.
339 %s\n\nThis file cannot be saved as it is currently locked. This file is either currently being saved, reloaded or compiled.
340 %s\n\nThis file cannot be closed as it is currently locked. This file is either currently being saved, reloaded or compiled.
341 '%s'\n\nThe debug location specified does not include a server. Please check the project debug settings.
342 '%s', line %d\n\nUnable to set breakpoint, the specified breakpoint will be removed.
343 Debugger Interface error encountered:\n\n%s
344 %s\n\nThis project cannot be closed while compiling or as it is currently being saved .
345 Error %d, unable to find the following directory:\n\n%s\n\nPlease verify that the path and name are correct.
346 The specified filename is already a directory.\n\n%s\n\nPlease select a different project name or location.
347 The specified filename already exists.\n\n%s\n\nPlease select a different project name or location.
348 The project uses the location property to determine where the build command should be executed. The specified project location property is not valid.
349 The server specified does not support remote sessions required to compile this file\n\n%s\n\nPlease check the server profile settings and try again.
350 Spelling
351 English (United States)
352 English (United Kingdom)
353 Danish
354 Dutch
355 Finnish
356 French
357 German
358 Italian
359 Norwegian
360 Portuguese
361 Spanish
362 Swedish
363 There is currently no spelling language specified. Would you like to select a language now?
364 Unable to load the spell checking lexicons for %s. Please check that this language\nis installed and that the location of the spelling dictionaries is correct.\n\nWould you like to check the spelling options?
368 The format of the search criteria is not a valid regular expression.\n\n%s
369 Remote shell login rejected: %s
370 RSH error %d\nWSA error %d
371 Programmer Studio is currently performing a task and cannot close.\n\nPlease cancel the current task using the Stop button, or , by selecting Stop from the View menu.
372 The following file originally contained lines using different line break formats.\n\n%s\n\nSaving this file will use the single line break format selected when the file\nwas opened. Are you sure you want to save this file?
373 The selected character on line %d cannot be translated into the "%s" character set.\n\nThis file cannot be saved until an alternate character is used or this character is deleted.
374 Bad test command:\n\n%s\n\nTest has been aborted.
375 Error %d, unable to search files from the following folder:\n\n%s\n\nPlease check that the path is valid.
376 Error %d, unable to parse this file using the library %s:\n\n%s\n\nPlease contact technical support for more information.
377 The debugger interface has encountered a fatal error:\n\n%s\n\nThe debug session has been terminated.
378 Packet protocol error %d\nWSA error %d
379 Programmer Studio does not allow you to create files in Robelle Qedit« format unless the server is correctly licensed by Robelle. The server you are currently connected to does not appear to have Robelle Qedit« installed.
380 Error %d, unable to save the following file:\n\n%s\n\nProgrammer Studio does not allow you to create files in Robelle Qedit« format unless the server is correctly licensed by Robelle. The server you are currently connected to does not appear to have Robelle Qedit« installed.
381 The following file cannot be saved:\n\n%s\n\nThe specified server does not currently support saving files as hex.
382 This version of Programmer Studio supports version %c.%c%c.%c%c.%c%c and above of WTRSH on the server. The currently installed version is %c.%c%c.%c%c.%c%c.
383 Error %d, unable to compare the following two files:\n\n%s\n%s
384 Error %d, unable to send this file as an email attachment.\n\nMAPI error %d.
385 The specified debugger '%s' is unknown.\n\nPlease check your project settings or file type to ensure this is correct.
386 Error %d, no connection was received from the debugger.
387 Error %d, unable to compile the following file.\n\n%s\n
388 A debug session should only be 'killed' if it has stopped responding to Programmer Studio. If the debugger is busy, use break to interrupt the debugger. If the debugger is waiting at a break point, use Stop to terminate the debugger.\n\nAre you sure you want to Kill the current debug session ?
389 Error %d. Unable to execute build command.\n\nIf this problem persists please contact Technical Support.
390 One or more files have been modified since they were last saved. Would you like to automatically save these changes?\n\nIf you select NO you will be prompted again in %s.
392 Are you sure you want to clear the current ClassView?
393 The selected tool, '%s', uses variables representing the active file. There is no file currently loaded.
394 Error %d, unable to execute the specified command.
395 Unable to create session on the specified server due to the following reason(s):\n\n%s\n\nPlease check your server profile and try again.
396 Are you sure you wish to send a RETURN key press ?\n\nIf you have successfully completed the login process you should NOT send\na RETURN key press. Instead click 'Next' to continue in the wizard.
397 This is not a valid regular expression (%d).
398 This expression does not match the current command prompt.
399 This expression only matches part of the current command prompt.
400 Unable to license the software. Please check that you have entered all the details exactly. These fields are all case-sensitive.
401 Your existing Programmer Studio license only allows you to connect to the server using FTP and TELNET. This server profile is configured to use WTRSH. In order to use WTRSH to connect to the server, you need to upgrade your license to Programmer Studio/iX. For information on upgrading please see Ordering Information in the Help menu.\n\nThis message will be displayed every time you connect to the server.
402 The source for this directory listing is empty.
403 Error %d, unable to compare the following two files:\n\n%s\n%s.\n\nThis may be caused by any applications currently running which interrupt application execution (i.e. virus scanners). Please check with your system administrator or Whisper Technology technical support.
404 %s\n\nFolder not found.\nPlease verify that the path and drive or server are correct.
405 Error %d, unable to build %s
406 Unable to compile, a compile or build is already in progress.\n\nPlease wait until the compile or build has been completed or select Cancel from the Build menu.
407 The specified margins are positioned outside of the printable area.\n\nAre you sure you wish to continue printing?
408 Unable to read project format, error %d.\n\nThe specified project appears to be corrupted.
415 The server name '%s' is not valid, it is already in use.
416 The server name '%s' is not valid. A server name must not include the character '/' as this is used as a path delimiter.
417 Are you sure you want to rename the server profile '%s' ?\n\nPlease ensure that this server profile is not used to open files or projects as these will now fail.
418 Error %d, unable to determine if the following file was saved:\n\n%s\n\nPlease check that the file has been created and the contents are valid. This may be due to the file not appearing in the directory listing.
419 Unable to open file '%s'.\n\n%s
420 %s
421 Error loading hook DLL '%s'.
422 Unable to locate 'EPHook' in hook DLL '%s'.
423 Error, unable to write to black-box file.\n\n%s\n\nPlease check that the file is not in use or write-protected.
424 Native MPE files may not be converted to Qedit format from within Programmer Studio.\n\nPlease select an alternative MPE file code for this file.
425 The length of line %ld exceeds the Qedit record length limit of %ld. This file cannot be saved until the length of this line is reduced or the file is saved in an alternate format.
800 File_Open
801 File_New
802 File_Close
803 File_NewProject
804 File_OpenProject
805 File_CloseProject
806 File_SaveProject
807 File_SaveProjectAs
808 File_Save
809 File_SaveAs
810 File_SaveAll
811 File_SendAsAttachment
812 File_Print
813 File_Exit
814 Edit_Undo
815 Edit_Redo
816 Edit_Cut
817 Edit_Copy
818 Edit_Paste
819 Edit_Delete
820 Edit_SelectLine
821 Edit_SelectAll
822 Edit_Find
823 Edit_FindNext
824 Edit_FindPrevious
825 Edit_FindInFiles
826 Edit_Replace
827 Edit_Goto_Line
828 Edit_Goto_Back
829 Edit_Goto_Forward
830 Edit_Goto_Next
831 Edit_Goto_Previous
832 Edit_Goto_DefinitionOf
833 Edit_Goto_ReferenceTo
834 Edit_Bookmarks_Toggle
835 Edit_Bookmarks_Named
836 Edit_Bookmarks_Next
837 Edit_Bookmarks_Previous
838 Edit_Bookmarks_ClearAll
839 Edit_ListMembers
840 Edit_TypeInfo
841 Edit_ParameterInfo
842 Edit_CompleteWord
843 View_Ruler
844 View_CaretHighlight
845 View_SelectionTips
846 View_BracketHighlight
847 View_GuideLines
848 View_LineNumbers
849 View_LineTags
850 View_Stop
851 View_Reload
852 View_RefreshSyntax
853 View_Properties
854 Format_Tabs
855 Format_Tabify
856 Format_UnTabify
857 Format_Indent
858 Format_Outdent
859 Format_NudgeIn
860 Format_NudgeOut
861 Format_Trim
862 Format_ChangeCase
863 Format_ChangeColumns
864 Format_Sort
865 Format_Uncomment
866 Format_Comment
867 Format_RenumberLines
868 Format_SetLineTag
869 Format_TagModifiedLines
870 Project_NewFolder
871 Project_AddFiles
872 Project_InsertFile
873 Project_ClearClassView
874 Project_Settings
875 Build_Build
876 Build_Compile
877 Build_Clean
878 Build_SelectCompiler
879 Build_Cancel
880 Debug_Start
881 Debug_StartStepInto
882 Debug_StartAttach
883 Debug_Continue
884 Debug_Restart
885 Debug_Stop
886 Debug_Break
887 Debug_KillSession
888 Debug_StepOver
889 Debug_StepInto
890 Debug_RunToCursor
891 Debug_SetNextStatement
892 Debug_ViewCallStack
893 Debug_ViewLocals
894 Debug_ToggleBreakpoint
895 Debug_Breakpoints
896 Debug_ShowNextStatement
897 Debug_QuickWatch
898 Debug_Settings
899 View_ClassDropDown
900 Edit_Goto_NextModifiedLine
901 Edit_Goto_PreviousModifiedLine
902 Edit_Goto_NextFunction
903 Edit_Goto_PreviousFunction
904 Tools_Spelling
905 Tools_CompareFiles
1002 Quits this application\nExit
1101 Activate the next open document\nNext Document
1102 Close all open documents\nClose All
1103 Activate the previous open document\nPrevious Document
1104 Arrange all open documents as overlapping tiles\nCascade
1105 Arrange all open documents as horizontal tiles\nTile Horizontally
1106 Arrange all open documents as vertical tiles\nTile Vertically
1107 Closes the active document\nClose
1201 Displays information about Programmer Studio\nAbout Programmer Studio
3000 Creates a new document\nNew
3001 Opens an existing document\nOpen
3002 Saves the active document\nSave
3003 Prints the active document\nPrint
3004 Reverses the last action\nUndo
3005 Redoes the previously undone action\nRedo
3006 Cuts the selection and puts it on the clipboard\nCut
3007 Copies the selection and puts it on the clipboard\nCopy
3008 Inserts the clipboard contents at the insertion point\nPaste
3009 Removes the selection without putting it on the clipboard\nClear
3011 Edit the general preferences
3013 Edit the syntax for the supported Languages
3015 Edit the Server Profiles
3017 Cancel the current task\nStop
3018 Edit the project settings\nProject Settings
3019 Compile the current document\nCompile
3022 Closes the active document\nClose
3023 Saves the active document under a different name\nSave As
3024 Save all the open files\nSave All
3026 Select the current line\nSelect Line
3027 Selects the entire document\nSelect All
3028 Finds the specified text\nFind
3029 Repeats the last find
3030 Searches for a string in multiple files\nFind in Files
3031 Replaces specific text with different text
3032 Toggle a bookmark on the current line\nToggle Bookmark
3033 Go to the next bookmark in the document\nNext Bookmark
3034 Go to the previous bookmark in the document\nPrevious Bookmark
3035 Refresh the syntax for the current document\nRefresh Syntax
3037 Move to a specified location\nGo to Line
3038 Goes to the next editor cursor position\nGo Forward
3039 Goes to the previous editor cursor position\nGo Back
3040 Edit the supported Compilers
3041 Select the compiler for the current document\nSelect Compiler
3042 Stop the current compile or build command\nStop Compile/Build
3044 Clear all bookmarks in the current document
3058 Toggles Ruler display on and off\nView Ruler
3059 Moves to the line containing the next error or tag\nNext Error/Tag
3060 Moves to the line containing the previous error or tag\nPrevious Error/Tag
3061 View the properties of the current document\nProperties
3062 Delete intermediate files defined in the project\nClean
3064 View the currently active server connections\nServer Connections
3065 Toggles the display of line numbers on and off\nLine Numbers
3066 Renumber lines in the current selection or document\nRenumber Lines
3067 Set the tag for lines in the current selection or document\nSet Line Tag
3068 Toggles the display of line tags on and off\nLine Tags
3069 Toggles editor current line highlight on and off\nCaret Highlight
3070 Update the tag on modified lines\nTag Modified Lines
3071 Modify the tab stop positions for this document\nTabs
3072 Creates a new project
3073 Opens an existing project
3074 Closes the current project
3075 Saves the current project
3076 Saves the current project with a new name
3077 Convert spaces in the current selection or document into tabs\nTabify Selection
3078 Convert tabs in the current selection or document into spaces\nUntabify Selection
3081 Remove trailing tabs and spaces from the current selection or document\nTrim Selection
3082 Insert a new Folder into the project\nNew Folder
3083 Insert one or more files into the project\nAdd Files to Folder
3084 Insert the current document into the project\nInsert File into Project
3098 Toggles guide line display on and off\nGuide Lines
3102 Reload the current document\nReload
3103 Check the spelling in the current selection or document\nSpelling
3104 Brings up the completion listbox\nList Members
3105 Provides the syntax for the variable, function or item selected in the editor\nType Info
3106 Brings up a listbox to help complete the current statement\nComplete Word
3107 Provides help with parameters for functions, members or procedures\nParameter Info
3108 Build the target defined in the project\nBuild
3110 Displays table of contents for online documentation\nHelp Contents
3111 Search online documentation\nSearch Help
3112 Go to the definition of the currently selected code item\nGo to Definition
3113 Go to the next reference to the currently selected code item\nGo to Reference
3114 Toggles the view of network traffic on and off
3118 Change the case of the currently selected text\nChange Case
3119 Toggles display of selected text size on and off\nSelection Tips
3120 Toggles the display of matching bracket and braces on and off\nBracket Highlighting
3121 Comment the current selection\nComment
3122 Uncomment the current selection\nUncomment
3123 Sort the lines in the current selection or document\nSort
3124 Compile two files and highlight any differences\nCompare Files
3126 Send the active document as an email attachment\nEmail as Attachment
3128 Move the current selection to the right by a tab-stop\nIndent Selection
3129 Move the current selection to the left by a tab-stop\nUnindent Selection
3130 Change, insert or delete columns in the current selection or document\nChange Columns
3134 Delete the contents of the project ClassView\nClear ClassView
3140 Move the current selection to the right by a single character position\nNudge Selection In
3141 Move the current selection to the left by a single character position\nNudge Selection Out
3142 Edit the active File Types
3149 Start the debug target using the debugger\nStart Debugging
3150 Start the debugger and highlight the first statement\nStep Into Debugging
3151 Attach the debugger to an existing process\nAttach to Process
3159 Edit the project settings for the current file\nProject File Settings
3165 Moves to the line containing the next modified line\nNext Modified Line
3166 Moves to the line containing the previous modified line\nPrevious Modified Line
3194 View named bookmarks\nNamed Bookmarks
3289 Cotinue debugging, stopping at the selected line\nRun to Cursor
3291 Stop the debugger\nStop Debugging
3292 Interrupt the debugger and highlight the current statement\nBreak
3293 Step into the next statement\nStep Into
3294 Step over the next statement\nStep Over
3295 Activate the Call Stack tab\nView Call Stack
3296 Activate the Locals tab\nView Locals
3297 Edit the debug settings\nDebug Settings
3299 Continue debugging, stopping at the next breakpoint\nContinue
3300 View the currently activte breakpoints\nView Breakpoints
3301 Toggle a breakpoint at the current line on and off\nToggle Breakpoint
3302 Display the results of the highlighted statement\nQuick Watch
3303 Close the session hosting the debugger\nKill Debug Session
3304 Highlight the next statement to be executed by the debugger\nShow Next Statement
3308 Restart the debug target within the debugger\nRestart
3309 Continue debugging at the current line\nSet Next Statement
