home *** CD-ROM | disk | FTP | other *** search
- Here are the common VGA video adapter pin connections:
-
-
- 9 pin A is used by NEC Multisync monitors. 9 pin B is used by Sony CPD-130n
-
-
- . 15 pin VGA card 9 pin A 9 pin B
-
- . 1. Red video 1 3
- . 2. Green video 2 4
- . 3. Blue video 3 5
- . 4. Monitor ID 2 no connection no connection Note 1
- . 5. not used n/a n/a
- . 6. Red return 6,7,8,9 1,2,6
- . 7. Green return 6,7,8,9 1,2,6
- . 8. Blue return 6,7,8,9 1,2,6
- . 9. no pin n/a n/a
- .10. Sync return 6,7,8,9 1,2,6
- .11. Monitor ID 0 6,7,8,9 1,2,6 Notes 1,2
- .12. Monitor ID 1 no connection no connection Notes 1,2
- .13. Horizontal sync 4 8
- .14. Vertical sync 5 9
- .15. not used n/a n/a
-
-
- Notes:
-
- .1. Monitor ID is not used by all adapters. Paradise does, Maxon and PaeLit
- . do not. See your manual for other brands.
-
- .2. Reverse Monitor ID bits 0 and 1 for monochrome monitor, if your VGA card
- . recognizes them. Monochrome monitors use green line for all video.
-
- .3. Sony pin map assumes digital/analog switch in analog position.
-
- .4. Transposing hookups does no apparent harm, but doesn't work, either.
-
-
- Uploaded by Ray Tackett, 76416,276. Comments and corrections invited.
-