home *** CD-ROM | disk | FTP | other *** search
- File = ComHelp.doc
- date = October 13, 1986 C O M P E E K V 1.5
- author = Donald Chandonnet
- ==========================
-
- ComHelp is a useful utility program to both READ and WRITE
- the Communication parameters in your PC's COM1
- and/or COM2 ports. It is better than using the DOS
- "Mode" command because it can read the settings from
- your port's Uart as well.
-
- (A) Features:
- -user-friendly MENU SYSTEM for Communication
- parameter setup
-
- -lets you set the Uart speeds to unusual
- speeds for testing limits of software or hardware
-
- -provides a "TOOLBOX" for solving your PC
- Communication problems. It can:
-
- * check if and how your serial card/internal
- modem is installed
-
- * provide exhaustive UART tests via
- internal and external loopbacks,
- helping you to test even your EIA
- cable.
-
- * provides indepth HELP screens to
- save time in understanding each bit
- in the UART registers.
-
- * provides a way to use ComHelp by
- bypassing the Main Menu and Advertising.
- (good for batch-file applications)
-
- (B) Environments:
- -works on IBM PC, IBM XT, IBM AT
-
- -tested with DOS 2.1, DOS 3.0, DOS 3.2
-
- -use with B/W or color monitors
-
- (C) Licence Information:
-
- -ComHelp is distributed as FREEWARE. If you
- like it, keep it. If you use it and it helps
- you, please send $5.00 to the author
- in appreciation and for continued support of
- the product.
-
- -Use it, distribute it, give it away for Xmass...
-
- -The right to use and distribute this program
- is subject to these two requests:
- (a) ComHelp must be unaltered and contain
- registration and support information,
- the developer's name and address.
- (b) This document file must accompany it,
- but can be altered with your own comments
-
- (D) Send your comments/questions to the author:
-
- Donald Chandonnet
- P.O. box 11422,
- Station H.,
- Nepean, Ontario,
- Canada, K2H 7V1
-
-
- (E) Your Comments to pass on...
-
- *** thankyou for your support ***