Programmer 7500

home *** CD-ROM | disk | FTP | other *** search

/ Programmer 7500 / MAX_PROGRAMMERS.iso / PROGRAMS / UTILS / MEMORIA / SWARPS.ZIP / SWAPDOS.DOC < prev next >

Wrap

Text File | 1990-02-01 | 65.1 KB | 1,562 lines

The SWAP Utilities(TM) SWAPDOS(TM) Version 1.00 -- February 1, 1990 Program: (c) Copyright 1988-1990 Nico Mak - All Rights Reserved Distributed under License by Innovative Data Concepts Documentation: Copyright 1990, Innovative Data Concepts All Rights Reserved Innovative Data Concepts 1657 The Fairways Suite 101 Jenkintown, PA 19046 1-215-884-3373 This document; other accompanying written and disk-based notes and specifications; and all referenced and related program files accompanying this document are copyrighted by Innovative Data Concepts. Licensing and distribution requirements are described later in this document. For ordering information, see the included ORDER.DOC file. _______ ____|__ | (TM) --| | |------------------- | ____|__ | Association of | | |_| Shareware |__| o | Professionals -----| | |--------------------- |___|___| MEMBER SWAPDOS is distributed as shareware -- this means that we encourage users, subject to restrictions described in the License Agreement, to share copies of this program with friends, associates and bulletin boards. You may not share the registered version of SWAPDOS; however, you may request a free shareware disk by completing the form in ORDER.DOC. If you make copies of SWAPDOS, you must include all files in the original distribution files, as well as the documentation archive. You are not permitted to distribute SWAPDOS without this documentation. Innovative Data Concepts is a member of the Association of Shareware Professionals. The ASP has established stringent standards for its members. ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a problem with an ASP member (other than technical support), ASP may be able to help. Please write to the ASP Ombudsman at P.O. Box 5786, Bellevue, WA 98006. Trademarks SWAPSK, SWAPSP, SWAPTN, SWAPMT, SWAPMM, SWAPSH, SWAPDT, SWAPNG and The SWAP Utilities are trademarks of Innovative Data Concepts. SideKick and SideKick Plus are registered trademarks of Borland International, Inc. Tornado is a trademark of Micro Logic Corp. Metro, Express and 1-2-3 are trademarks of Lotus Development Corporation. MemoryMate is a trademark of Broderbund Software. TesSeRact is a trademark of the TesSeRact Development Team. DESQview and QEMM-386 are trademarks of Quarterdeck Office Systems. Software Carousel is a trademark of SoftLogic Solutions, Inc. 386Max is a trademark of Qualitas, Inc. dBASE is a trademark of Ashton Tate, Inc. WordPerfect is a trademark of WordPerfect Corporation. Page 2 SWAPDOS 1.00 Documentation Table of Contents Introductory Notes..............................................2 What is SWAPDOS?....................................................5 What Do I Use SWAPDOS For?......................................5 Installation........................................................7 Installing the Shareware Version................................7 Files in the archive........................................7 Installing the Registered Version...............................8 Files on the diskette.......................................8 Using IDCBRAND..................................................8 Quick Start.........................................................8 The SWAPDOS Command-Line............................................9 Detailed Explanation of Command-Line Options...................10 Using the DOS Environment to Set SWAPDOS Options...............11 Using SWAPDOS for a Single Application.............................12 dBASE III and dBASE IV.....................................12 MAKE utilities.............................................13 KEDIT from Mansfield Software Group........................13 1-2-3......................................................13 Microsoft Word.............................................13 WordPerfect Library........................................13 WordPerfect 5.1............................................13 TAPCIS.....................................................13 Simple Shells..................................................14 GrandView..................................................14 WordStar...................................................14 WordPerfect (before version 5.1)...........................14 WordPerfect Program Editor.................................14 Using SWAPDOS "Marks"..............................................14 Technical Information..............................................15 Where SWAPDOS writes the swap data.............................15 EMS and XMS (Expanded and Extended Memory).....................15 Compatibility with TSRs........................................16 Command Interpreters other than COMMAND.COM....................16 PCED.......................................................16 4DOS.......................................................17 FlexShell..................................................18 Loading SWAPDOS "Marks" in "High" DOS Memory...................18 Interrupt Vectors and the EGA pointer..........................18 Exit Codes and Error Messages......................................18 Exit Codes.....................................................18 Error Message Descriptions.....................................19 If Something Goes Wrong............................................22 Commonly Asked Questions...........................................22 Future releases................................................24 COPYRIGHT NOTICE AND LICENSE.......................................24 Warranty.......................................................24 Registration...................................................25 Bulletin Boards, Users Groups and Disk Vendors.................25 About Innovative Data Concepts.....................................26 The Rest of The SWAP Utilities.....................................26 Association of Shareware Professionals.............................27 Standards for the Association of Shareware Professionals.......27 PROGRAMMING................................................27 DOCUMENTATION..............................................27 SUPPORT....................................................27 GENERAL....................................................28 SWAPDOS 1.00 Documentation Page 3 What is SWAPDOS? SWAPDOS provides an application independent method for one PC/MS-DOS application to run another, even if both would normally not fit in memory at the same time. A typical use is to temporarily swap out dBASE to make room for your text editor, or to swap out a text editor so that you can run memory hungry compilers, linkers, or even debuggers without losing your place in an editing session. SWAPDOS works by copying conventional memory used by the currently running application to expanded memory, extended memory, or to a disk file, thereby freeing conventional memory used by the application. SWAPDOS then runs the desired program before restoring the original environment. Throughout this documentation, you will see references to two different kinds of "swaps". The normal swap is when SWAPDOS is directly called by either COMMAND.COM or another program. This method swaps out a single program. The more powerful type of swapping SWAPDOS uses is called the "long swap." With this method, you can swap out multiple programs, resident programs, etc., in one fell swoop. For example, if you like to have a ram-resident dictionary available when using your word processor, but don't want the dictionary when you use your database program. Using the SWAPDOS "Mark/long swap" technology, you can remove both the word processor and the dictionary before running your database -- AND THEN PUT THEM BACK WHEN YOU RETURN! The amount of extra memory gained by using SWAPDOS depends on the application(s) being swapped out. In general, ALL of the memory used by your program is available for use, minus about 3000 bytes. SWAPDOS is compatible with most PC/MS-DOS programs. However, before relying on it, you should test SWAPDOS with your own configuration in case of conflicts with TSRs and other software. SWAPDOS requires the use of DOS 3.0 or later. What Do I Use SWAPDOS For? That all depends. Different people use it for different reasons, and different purposes. Rather than try to describe all the different possibilities and permutations, IDC has elected to have our users describe how they use the program. I use it inside of PC-Matlab, because Matlab chews up MUCHO memory, and then, if you want to print a graph, it shells out to its external graphmaking utility. If you have too much stuff defined, you can't print your graphs from inside Matlab! You have to save the graphics "metafiles" and print from DOS. Using SWAPDOS allows me to ALWAYS be able to print from inside Matlab. -- Neil Judell, President, Technical Development Group, Inc. Page 4 SWAPDOS 1.00 Documentation Because I load a TSR spell-checker before running TAPCIS, I normally have only 140K available after shelling from TAPCIS. SWAPDOS makes more than 580K of memory free when shelling from TAP, allowing me to run Brief, Norton Commander, or MSGVU, from within TAPCIS. I also use it to run Brief when shelling out of QuickBasic. John P. Wexler, MD, PhD Asst Dean of Scientific Computing Albert Einstein College of Medicine SWAPDOS fills more than the obvious need to re-claim memory while shelled from an application program. Standard DOS commands like DISKCOPY and XCOPY operate more efficiently when SWAPDOS temporarily frees even one TSR. Robert J. Rucinski Audiovisual Services Detroit Public Schools As a Compuserve Sysop, I respond to and archive messages in the Cancer Forum. I use the program TAPCIS to "massage" long files of messages. When I need a better editor than that provided with TAPCIS, I can shell from TAPCIS, use SWAPDOS, and work efficiently with long message files in the memory space thereby released. Gene R. Feaster, PhD Medical Physicist (retired) University of Kansas Medical Center I run a very complex system with many TSRs loaded most of the time. Still, occasionally, I run applications which require all or most of DOS' 640K. SWAPDOS has enabled me to define command synonyms (or batch files) that can unload all the TSRs, load the memory intensive application such as Ventura Publisher, and then reload my TSRs. I used to solve this by having numerous sets of AUTOEXEC.BAT's and CONFIG.SYS', and rebooting the computer constantly. Now I can get in and out of these applications quickly, and have the TSRs reloaded IN THEIR PREVIOUS STATE! Imagine running Ventura from a dBase shell! If SideKick Plus had five files loaded that I was editing, they're all still there! SWAPDOS is a concept whose time has come! Robert K. Blaine Owner ECONO-SOFT SWAPDOS 1.00 Documentation Page 5 SWAPDOS is a great utility which uses much less memory than similar commercial products. We use it in my law office to swap out of Microsoft Word to run other programs. With SWAPDOS, my secretary does not have to save her work, then quit Word, run the next program, reload word, reload the document she was working on, and then find her place within that document. Instead, with SWAPDOS, executing just one command swaps Word and the document she was working on to memory and just one command returns her to Word in the document EXACTLY where she left off, with all glossaries and other macros, etc., still loaded!! If you use one or two main programs and wish to switch among them, or to switch to other programs, and if you don't wish to use complicated programs like Software Carousel or DesqView, then SWAPDOS is essential. If you have just 640K with no expanded or extended memory, then SWAPDOS is even more essential. Like all The SWAP Utilities, SWAPDOS is a must have!! Gary L. Britt Attorney at Law Houston, Texas Installation Installation of SWAPDOS is simple. Basically, create a directory, copy the files, "Brand" the program with your name and serial number, and you're ready to go! Installing the Shareware Version Normally, this documentation file and all the supporting files are distributed as the file, "SWAPDS.COM", which is a self-extracting archive file. To extract all the files, type: SWAPDS [ENTER] At the DOS prompt. That will create the program files. To print this documentation, type: copy SWAPDOS.DOC LPT1 [ENTER] The documentation is formatted for 58 lines per page, with 75 characters per line, to permit easy printing on the widest variety of dot-matrix and laser printers. Files in the archive SWAPDOS.COM..............The SWAPDOS Program SWAPDOS.DOC..............The Program's Documentation IDCBRAND.COM.............The IDC 'Brand' Program ORDER.DOC................Order Form and Site License Information VENDOR.DOC...............Distribution Requirements for Shareware Disk Vendors READ.ME..................Late-breaking Information about SWAPDOS Page 6 SWAPDOS 1.00 Documentation Installing the Registered Version Using the DOS command DISKCOPY, make a working copy of the SWAPDOS distribution diskette and keep the original in a safe place. Use the DOS TYPE or PRINT command to view the contents of the READ.ME file on the program diskette. This file contains any information on SWAPDOS usage that has become available since this manual was printed. Copy the files SWAPDOS.COM and IDCBRAND.COM from the distribution diskette to any directory in your path. If you are not sure which directories are in your path, you can use the DOS command PATH to get a list. Files on the diskette SWAPDOS.COM..............The SWAPDOS Program SWAPDOS.DOC..............The Program's Documentation IDCBRAND.COM.............The IDC 'Brand' Program ORDER.DOC................Order Form and Site License Information READ.ME..................Late-breaking Information about SWAPDOS Using IDCBRAND At the DOS prompt, from the directory that contains SWAPDOS.COM, type: IDCBRAND SWAPDOS.COM [ENTER] You will be asked to enter your name (registered versions will also be asked for a serial number). ONCE THE PROGRAM IS BRANDED, IT MAY NOT BE RE- INSTALLED without copying from the original master diskette! Make sure the information is correct, and press [ENTER] to confirm. Quick Start Make sure that SWAPDOS.COM is in your path! We recommend that you take the time to read the rest of the manual before running SWAPDOS. However, if you are in a hurry to use SWAPDOS, first check whether your application is listed in the examples in the section titled "Using SWAPDOS for a Single Application." If it is listed, follow the instructions in the example. Otherwise, if you are willing to take a chance that an incompatibility between SWAPDOS and your application will require that you reboot your computer, you can start using SWAPDOS to swap out a single application by following these simple instructions: 1) Shell to DOS from your application. 2) Enter the following command at the DOS prompt to swap out your application. SWAPDOS [ENTER] 3) When you want to return to your application, use the EXIT command at the DOS prompt to swap your application back into conventional memory. SWAPDOS 1.00 Documentation Page 7 4) Enter the EXIT command at the DOS prompt to return to your application. If you only want to run one program while your application is swapped out, you can combine steps two and three by specifying the program name at the end of the SWAPDOS command. For example, to run Lotus 1-2-3 while your application is swapped out, use the command SWAPDOS 123 [ENTER] Many programs permit more than a simple "Shell to DOS" function. For example, Microsoft Word has the "Library Run" command, that permits you to run another program. You may run SWAPDOS directly from programs like these, instead of going to a DOS shell first. The SWAPDOS Command-Line The SWAPDOS command can be entered at the DOS prompt, or it can be part of the command string that your application sends to DOS to run another program. The section titled "Using SWAPDOS for a Single Application" for examples of using SWAPDOS. The command syntax is SWAPDOS [options] [command] Where: Options are one or more of the options listed below. Command is the program you want to run while your application is swapped out. Options may be preceded by either a '-' or '/' as a switch character. Any options that have an optional argument (such as the /M option) may use either an equals "=" or a colon ":" as the separator. Valid options are: /H /? ? -- Display this help screen /S=x -- Set Swapping Type (0=Auto, 1=Disk, 2=EMM, 3=XMS) SwapType = 0 is the default; if selected type fails (i.e.,no XMS is available with /S=3), auto-check is done. /D=path -- FULL PATHNAME to store swap files /U -- Unique filename is used for swapping /M=name -- Set a SWAPDOS "mark" in memory (name is optional) /L=name -- Long swap to a SWAPDOS "mark" (name is optional) /K=name -- Remove a SWAPDOS "mark" (name is optional) /I=name -- Check to see if "mark" is in memory (name is optional) /F -- Force swap even if application appears to have hooked interrupt vectors /Q -- Quiet - suppress information messages /V -- Vector saving is suppressed /Z -- Zero "stray" interrupt vectors "/" and "-" are valid switch characters "=" and ":" are valid separators Page 8 SWAPDOS 1.00 Documentation If you do not specify a command, then SWAPDOS simply loads another copy of the command processor specified by the COMSPEC variable, and leaves you at the DOS prompt. Type EXIT at the DOS prompt to restore the programs you have swapped out and exit SWAPDOS. Most options (except those that take optional parameters) can be prefixed by an "n" to disable an option that was previously set. For example, in the command "SWAPDOS /U /NU" the /NU negates the effect of the /U. The "N" prefix is useful for overriding options set in the SWAPOPT= environment variable, described in the section titled "Using The DOS Environment To Set SWAPDOS Options". Detailed Explanation of Command-Line Options /S=x -- The /S parameter determines the type of swapping to use. In the default Autodetect mode, SWAPDOS will attempt to allocate expanded memory, using EMS version level 3.2 or later. If EMS is not available, the utility will attempt to use Extended Memory that is available, using Microsoft's eXtended Memory Specification (XMS) (See note about XMS below). If neither EMS or XMS is available, a disk file will be created, and SWAPDOS will use disk (default, C:\) for swapping. The /S parameter can be used to override the default mode, and force swapping to XMS, EMS or Disk. If the swapping method specified with /S is not valid, then Auto mode is used. /D=path -- The /D parameter tells SWAPDOS in what drive and directory to store the swap file. The default is the root directory on drive C (C:\). The pathname is limited to 30 characters, and must contain a valid drive specification, and path. The trailing backslash is not necessary. If the /D parameter is not the last option on the command-line, there must be a space character following the pathname and before another slash option. Note that this option does not force SWAPDOS to write to disk. Use the /S=1 option to force SWAPDOS to use a disk swap file even if you have available EMS or XMS memory. An example of this switch is: /D=C:\TEMP /U -- This option causes SWAPDOS to use a "unique" filename for disk swap files using the DOS function to create a temporary filename. Filenames created with the /U option usually consist of all numeric digits. This option is mainly useful when multiple machines on a network swap to the same shared subdirectory, since the default filename is sufficiently "unique" for single user (non-networked) machines, and makes it easy to identify and erase unnecessary swap files if you reboot your machine while swap is active. Note that this option does not force SWAPDOS to write to disk. Use the /S=1 option to force SWAPDOS to use a disk swap file even if you have available EMS or XMS memory. /Q -- Specifies that most SWAPDOS informational messages are not displayed (not available in shareware version). /Z -- Zeros all "stray" interrupt vectors that point to free memory. This can be useful to help determine whether the /F option is safe with a particular application. This option is unnecessary if using the preferred mark/long swap method. The following options are used in conjunction with the SWAPDOS mark/long swap method. Note that mark names are not case sensitive, just like DOS commands (i.e., "TEST" and "test" are identical). SWAPDOS 1.00 Documentation Page 9 /M=name -- Sets a swap "mark". All programs loaded after SWAPDOS is run with this option are swapped out when the /L option is used. A mark "name" can be specified after the /M option, but is not required. /L=name -- This is a "long swap", used in conjunction with a "mark". It specifies that all TSRs and applications loaded since the last swap "mark" (or after the last mark with the same mark "name") are to be swapped out. A "mark name" can be specified after the /L option, but is not required. /K=name -- Kills (removes from memory) a swap "mark" set with the /M option and all memory owned by programs loaded after the "mark". A "mark name" can be specified after the /K option, but is not required. /I=name -- Determines whether the (optionally named) specified mark has been found. Can be used in a batch file to determine whether you should use a long swap or not. Returns with ERRORLEVEL set to ZERO (0) if the specified mark is found, and 2 if not found. NOTE! The following two options are provided (/V and /F), but should NOT be used. Their functionality and features could crash your machine, and Innovative Data Concepts will not provide ANY support if these two options are used! If you need this functionality, use the SWAPDOS "mark" and "long swap" method. /V -- Suppresses the normal save and restore of all interrupt vectors before and after swapping. This option saves 1K of memory, but should only be used if you are sure that no programs which hook interrupt vectors are used while your application is swapped out. WE STRONGLY ADVISE AGAINST THE USE OF THIS OPTION! /F -- Forces SWAPDOS to continue even if an interrupt vector points to the program that gets swapped out. This option is provided ONLY for backward compatibility with previous versions of this program. WE STRONGLY ADVISE AGAINST THE USE OF THIS OPTION! Using the DOS Environment to Set SWAPDOS Options Default SWAPDOS options can be specified using a DOS environment variable called SWAPOPT. You can set the value of the SWAPOPT environment variable by using the DOS SET command: SET SWAPOPT=options [ENTER] Options specified on the command line override options specified in the environment variable. SWAPDOS looks for this environment variable and processes any options that it contains before processing the options on the SWAPDOS command line. The section titled "The SWAPDOS Command-Line" lists all valid SWAPDOS options. The "n" prefix described in that section can be used on the command line options to override any options set in the environment variable. The SWAPOPT environment variable is usually set from within your AUTOEXEC.BAT. Your DOS manual contains more information on AUTOEXEC.BAT files and the SET command. Page 10 SWAPDOS 1.00 Documentation Please note that you cannot use the '=' as a separator in your SWAPOPT. Instead, use the ':' character as a separator. As an example, you can issue the command SET SWAPOPT=/L /Q /S:1 /D:H:\[ENTER] to make the /L, /Q, /S:1 and /D:H:\ options the defaults for any SWAPDOS commands subsequently issued. If you subsequently issue the command "SWAPDOS /S:0" then SWAPDOS will try to swap to EMS or XMS before swapping to disk, because the command-line options override the environment settings. The most common use of SWAPOPT would be to use /Q, /L (so you ALWAYS have a long swap), /D to set the swapping directory to a ramdisk, and /S to set the swapping type. You SHOULD NOT use /M, /K or /H in the SWAPOPT variable. Using SWAPDOS for a Single Application To run SWAPDOS to swap out a single application program to make room for another, you can either 1) Use the shell-to-DOS feature of the program to get to the DOS prompt and run SWAPDOS.COM, or 2) Imbed the SWAPDOS command in the command string that your application sends to DOS to run another program. The commands to perform this function vary from application to application. If the examples below do not include your application, and if you don't know the appropriate command for your application, check the application manual's index and table of contents for "Shell to DOS", "Exit to DOS", "System", and "Run". Here are examples of how to swap out some popular programs: dBASE III and dBASE IV To run SWAPDOS to swap out dBASE and load your favorite editor, you could enter the dBASE command RUN SWAPDOS KEDIT filename [ENTER] Alternately, you could add the following line to your CONFIG.DB file: TEDIT = SWAPDOS.COM KEDIT.EXE and subsequently enter the following dBASE command to edit a file: MODIFY COMMAND filename [ENTER] SWAPDOS 1.00 Documentation Page 11 MAKE utilities To swap out most MAKE utilities so that your compiler has more available memory, use a makefile that looks like this appl.obj: appl.c appl.h swapdos cl -Zip $*.c KEDIT from Mansfield Software Group The KEDIT command "DOS SWAPDOS /Q" will swap out KEDIT and leave you at the DOS prompt. To automatically swap out KEDIT by pressing a single key, add the command "Define Alt-F4 dos SWAPDOS /Q" to your PROFILE.KEX configuration file and exit the editor. When you subsequently run KEDIT you can press Alt-F4 to automatically run SWAPDOS. 1-2-3 Use the 1-2-3 "System" command to shell to dos, and then type "SWAPDOS" to recover the memory used by the program. Microsoft Word Select "Library Run", and enter "SWAPDOS [cmd]", to run another program. WordPerfect Library To recover the 40K or so used by the WordPerfect Library Shell, go into the setup screen, and change the command to execute to call SWAPDOS instead of the application directly. WordPerfect 5.1 Press Ctrl-F1, followed by numeral 2, and type: SWAPDOS [programname] [ENTER] WordPerfect may take control of the EGA/VGA Control region, necessitating the use of a SWAPDOS "mark". TAPCIS Same as WordPerfect 5.1, except use Shift-F1. TAPCIS may take control of the EGA/VGA Control region or some interrupt vectors, necessitating the use of a SWAPDOS "mark". Page 12 SWAPDOS 1.00 Documentation Simple Shells The following programs do not permit running a separate application; however, they do permit the use of a DOS shell. Simply shell to DOS using the appropriate commands, and then type: SWAPDOS [ENTER] to recover the memory used by the application. GrandView WordStar WordPerfect (before version 5.1) WordPerfect Program Editor Using SWAPDOS "Marks" The SWAPDOS /K, /L, and /M allow you to swap out multiple applications and TSRs at one time. To use this facility, follow these steps: 1) Issue the command "SWAPDOS /M". This causes SWAPDOS to reserve about 1,200 bytes of your computers conventional memory for information needed to swap out subsequently loaded programs. This is referred to as a swap "mark". 2) Load one or more TSRs and/or application programs (for example, a spelling checker and your word processor). 3) To swap out programs loaded in step 2, issue the command "SWAPDOS /L". Note that the "mark" set in step 1 cannot be used again until you complete step 4. 4) Once you are ready to restore the programs swapped out in step 3 issue the EXIT [ENTER] command from the DOS prompt. 5) After leaving the applications or unloading the TSRs loaded in step 2 issue the command "SWAPDOS /K" to reclaim the memory used by the swap "mark" set up during step 1. As an example, if you use Turbo Lightning and WordPerfect, you could do the following: SWAPDOS /M=LIGHT [ENTER]-- Load SWAPDOS mark named "LIGHT" LIGHT [ENTER] -- Load Lightning WP [ENTER] -- Load WordPerfect -- shell to DOS with Ctrl-F1 SWAPDOS /L=LIGHT [ENTER] -- Long SWAP to "LIGHT" mark -- run whatever programs you like EXIT [ENTER] -- recover memory EXIT [ENTER] -- back to WP -- quit from WP SWAPDOS /K=LIGHT [ENTER] -- to remove SWAPDOS mark and Lightning from RAM If you loaded TSRs in step 2 that do not have an "unload" option, you can usually reclaim any conventional memory they allocated with the "SWAPDOS SWAPDOS 1.00 Documentation Page 13 /K" command. However, if possible, it is always better to use the TSR's "unload" facilities, rather than relying on the /K option, to ensure that any application specific resources (e.g. temporary disk work files, EMS or XMS memory, etc.) are restored. PLEASE NOTE: If you run IDC's SWAP Utility TSR programs between SWAPDOS /M and SWAPDOS /L, and then re-load them while the SWAP?? program is resident, you will trash the original copy's swap files! For example, if you already have SWAPSP loaded, and remove it with a long swap, you will overwrite the SWAPSP temporary files if you re-load SWAPSP again before restoring! If you only want to run one program while your TSRs and/or applications are swapped out, you can combine steps three and four by specifying the program name at the end of the SWAPDOS command. For example, to run Lotus 1-2-3 while the programs are swapped out, use the command SWAPDOS /L 123 You can specify a "swap name" with the /M /L, and /K options. If you specify a name when you set a mark with the /M option you can later reference that mark by again specifying the name with the /L or /K options. For example, if you issue the command "SWAPDOS /M=FirstMark", load a TSR or application, and later set another mark, you can swap out all programs loaded after the first mark with the command "SWAPDOS /L=FirstMark". Restrictions for Mark Names Note that swap names are NOT case sensitive (in other words "first" and "FIRST" and "First" are all considered the same mark name) and are limited to 12 characters. All characters following the separator and up to the first space are considered part of the swap name. Only alphanumeric characters may be used for mark names -- numbers and letters. Technical Information Where SWAPDOS writes the swap data Normally SWAPDOS first will try to swap to expanded memory (EMS 3.2 or later is required for expanded memory support). If there is no expanded memory available it will try to swap to extended memory (XMS version 2.0 or later is required for extended memory support). If there is no extended memory available it will swap to disk, using the default filename C:\SWAPxxxx.SWP (where xxxx is the process ID of the program that gets swapped out). You can override the normal behavior with the /S, /U, and /D options described previously. EMS and XMS (Expanded and Extended Memory) EMS is the Expanded Memory Specification, developed by Lotus, Intel, Microsoft. In Intel 8086 and 80286 machines (e.g. IBM PC and IBM AT) EMS support is normally provided by memory expansion boards such as the AST Rampage. On Intel 80386 machines (e.g. IBM PS/2 model 60 to 80) EMS support is implemented in software, either via memory managers such as Page 14 SWAPDOS 1.00 Documentation 386MAX from Qualitas or device drivers like XMAEM.SYS and XMA2EMS.SYS provided with IBM's PC-DOS 4.00. XMS is the eXtended Memory Specification, developed by Lotus, Intel, Microsoft, and AST. XMS support is provided by the HIMEM.SYS driver included with MS-DOS 4.00 (but not IBM's PC-DOS) and with Windows 286. If you don't have HIMEM.SYS but have access to CompuServe, you can get a free copy from in library 1 of the CompuServe MSSYS forum. The 386MAX memory manager from Qualitas also supports XMS, as does QuarterDeck's QEMM 5.0 Compatibility with TSRs SWAPDOS is compatible with most TSRs (Terminate and Stay Resident programs). It will coexist with these programs and even swap them out (thereby temporarily disabling them). However, if you load (initialize) TSRs while an application is swapped out, you should unload the TSR before returning to your application. For example, you can use the command "SK" to load SideKick before starting your application, then run SWAPDOS, and hot-key into SideKick while SWAPDOS is active, but you should not load SideKick with the command "SWAPDOS SK". Command Interpreters other than COMMAND.COM SWAPDOS should be compatible with most command interpreters, as long as they are compatible enough with COMMAND.COM. Two that are known to work well are 4DOS and FlexShell. Why replace COMMAND.COM? It is the confirmed opinion of IDC that COMMAND.COM is a brain-damaged command-line interpreter. Batch files are slow and have a kludgey language interface; command-line editing is next to nil; and the internal commands lack flexibility. For these and other reasons, we heartily recommend using either PCED, a COMMAND.COM extension program, or the two replacement shells (4DOS and FlexShell) mentioned above. PCED stands for Professional Command EDitor. It is designed to help you with editing command-lines, repetitive commands, and more. It provides these basic features: - A better command editor than the one that is part of DOS. - A way to quickly recall and edit previously-issued commands for re- entry. - Command synonyms, which allow you to abbreviate often-used commands to a few letters or symbols. - The ability to "chain" a series of commands together without using disk-wasting batch files. - Automatic recall of arguments to previously-issued commands. In addition, PCED provides an external interface that allows other programs to make use of PCED features if they wish to. It is even possible, using this interface, to simulate the addition of new internal commands to DOS. For more information, contact The Cove Software Group, Post Office Box 1027, Columbia, MD 21044, or call 1-301-992-9371. SWAPDOS 1.00 Documentation Page 15 SWAPDOS has been specifically tested with 4DOS, the shareware COMMAND.COM replacement which was a finalist for the 1989 PC Magazine Technical Excellence Award. 4DOS replaces COMMAND.COM, the command interpreter that comes with all versions of MS-DOS and PC-DOS. You'll find 4DOS provides many capabilities that COMMAND.COM can't: - A Vastly enhanced DIR command. - Point-and-shoot file selection for any command. - Command history and editing. - Shorthand commands called "aliases". - More than 40 "new" DOS commands. With all this added functionality, 4DOS is completely compatible with COMMAND.COM, and requires less than 4K of DOS memory while your applications are running. For more information, contact J.P. Software at P.O. Box 1470, E. Arlington, MA 02174; phone 1-617-646-3975, fax 617-646- 0904. SWAPDOS will detect the presence of 4DOS in your system, and adjust itself accordingly. 4DOS provides vastly increased power at the DOS command-line, and may be of particular interest to SWAPDOS users. Versions of 4DOS prior to 3.0 do not require the use of a "master" (memory- resident) DOS environment, so SWAPDOS is unable to reduce its own environment before going resident for a SWAPDOS "mark". In 4DOS version 3.0, the master environment is standard, and this problem should not occur. If you are using a version of 4DOS prior to 3.0, use the following method to reduce the space taken by the environment when SWAPDOS is loaded: Put all the alias definitions and all the non-critical environment assignments in the 4start.bat file. When you want to load the SWAPDOS mark, use the following sequence of commands in your batch file: unalias * REM set all non-critical environment strings to blank SWAPDOS /M=name REM call 4START or a similar batch file to reload the aliases and environment strings Note that you should not use the 4DOS SETLOCAL and ENDLOCAL commands to modify the environment for SWAPDOS, because they will leave a "hole" in memory below SWAPDOS. This will cause no harm, but will eliminate the memory savings you wanted! If you have any trouble using SWAPDOS with 4DOS, contact either IDC or J.P. Software, publishers of 4DOS, at 1-617-646-3975. Both companies are equipped to support your use of these products together. Page 16 SWAPDOS 1.00 Documentation FlexShell from FlexWare is a shell for DOS that replaces COMMAND.COM. Some of the benefits of using FlexShell are: - It enhances almost all standard COMMAND.COM commands and adds many new commands. - It executes standard BAT files. - It provides a command-line editor, a history stack with command-line completion and aliases. - It consumes little memory and can utilize EMS. - Custom shells can be built using ShellGen, a companion utility, which lets you choose the commands and features to be included. - Command extensions can be written in C or assembler. For more information, contact FlexWare, 937 JungFrau Ct., Milpitas, CA 95035, or Stan Mitchell 73227,1463 on Compuserve. Loading SWAPDOS "Marks" in "High" DOS Memory In a single word: DON'T! The methods SWAPDOS use to swap out applications requires that it be present in low memory, below the application to be swapped out. Do not load SWAPDOS into high memory! Interrupt Vectors and the EGA pointer SWAPDOS will not swap out a program that has taken control of one or more of the systems interrupt vectors, nor will it swap an application that controls the EGA/VGA Save Pointer region. This is because removing interrupt handling code would probably result in a crashed machine. However, spurious interrupt vectors often point at memory used by the application program you want to swap out. If you want to swap out an application which has taken control of the system interrupt vectors or uses the EGA/VGA Save Pointer region, use the SWAPDOS "mark/long swap" method described above. Exit Codes and Error Messages Exit Codes SWAPDOS exit codes (sometimes known as error levels or return codes) and their meanings are: 0 - SWAPDOS completed successfully. 1 - An invalid option was specified. 2 - An error occurred before SWAPDOS temporarily freed up memory. 3 - An error occurred after SWAPDOS temporarily freed up memory. This exit code indicates a serious condition that may require a reboot (e.g. the user erased the disk swap file, so SWAPDOS cannot restore the environment). You can check the SWAPDOS error code from DOS batch files with the batch file command IF ERRORLEVEL, as described in your DOS manual. SWAPDOS 1.00 Documentation Page 17 Error Message Descriptions SWAPDOS error messages and error message descriptions follow: Could not allocate extended memory An error was returned by the XMS memory manager when SWAPDOS attempted to allocate extended memory. This could happen if you specified the /S=3 option but there was not enough free extended memory. Could not create swap file DOS returned an error when SWAPDOS tried to create its swap file on disk. This would happen if the path information specified by the /D option was invalid. If you did not use the /D option and have a C: drive, perhaps you are already using the maximum number of files allowed by your version of DOS in the root directory, or perhaps the disk is full. Could not find an application to swap out SWAPDOS could not find an application program to swap out. This could happen if you are running SWAPDOS from the DOS prompt but did not use the "shell to DOS" feature of an application to get to the DOS prompt. Note that if you want to swap out TSRs, you need to use the /L option, as described in section the section titled "Using SWAPDOS Marks". Could not find COMSPEC= in environment SWAPDOS could not find the required COMSPEC= variable in your environment. This could happen if some .BAT file you ran issued the DOS command "set comspec=". Note that this environment variable is set automatically when you boot DOS. Could not find Master DOS Environment This message indicates a serious incompatibility between SWAPDOS and your command interpreter. Please contact IDC Technical Support immediately. Could not find specified SWAPDOS "mark" You specified the /K or /L options, but SWAPDOS could not find the SWAPDOS "mark". This could happen if you forgot to run SWAPDOS with the /M option, or if you have already swapped out all your swap "marks". Could not find SWAP's PSP There is a problem with the memory allocation chain. Notify IDC technical support if you see this message. Could not open swap file DOS returned an error while SWAPDOS was trying to open a disk swap file. This could happen if you (or some program you ran) erased the swap file. Page 18 SWAPDOS 1.00 Documentation DOS version must be 3.0 or higher SWAPDOS will not work with DOS versions under 3.0. Consider upgrading to DOS version 3.3 or higher. EMS Error nn function mm The EMS memory manager returned error nn while processing function mm. Use the /S=1 or /S=3 option to circumvent this problem. This most likely happened if your EMS is not configured correctly. If you believe your EMS is configured correctly (e.g. you have successfully used your EMS memory with other programs) contact IDC technical support. Error reading swap file DOS returned an error while SWAPDOS was trying to read from a disk swap file. This could happen if you (or some program you ran) erased the swap file. Error writing to swap file DOS returned an error while SWAPDOS was trying to write to a disk swap file. This could happen if the disk specified by the /D option (or the C disk, if you didn't use the /D option) is full. Fileid prefix specified after /D option is too long The path information specified after the /D option is too long. The limit is 52 characters. Invalid character in mark name Only alphanumeric characters (0 through 9, A through Z) are permitted in mark names. Lower-case letters are converted to upper case before storage. Invalid option An invalid option was specified. Valid options are listed in the section titled "Command Syntax". Less than 16K to swap SWAPDOS will not swap out programs smaller than 16K in size. LSEEK on swap file failed DOS returned an error while SWAPDOS tried to set the file pointer for a disk swap file. This could happen if you (or some program you ran) erased the swap file. Mark name is too long The specified mark name was too long. The limit is 12 characters. SWAPDOS 1.00 Documentation Page 19 Memory is too fragmented to swap SWAPDOS could not find a required memory control block while looking through the memory allocation chain. This could happen if you are running other programs that manipulate the memory allocation chain while SWAPDOS is running (i.e., multitasking software). No XMS Driver You have specified the /S=3 option, but an XMS driver is not installed in your machine. Make sure that Microsoft's HIMEM.SYS (or an equivalent XMS driver) is being loaded through your CONFIG.SYS. Not enough memory SWAPDOS was unable to reallocate its own memory. Most likely, the DOS memory allocation chain has been corrupted. Contact IDC technical support for assistance. Over 200 Memory Control Blocks in system This error will occur in the unlikely event that you have more than 200 memory control blocks in use. Contact IDC technical support if you encounter this error message. SWAPDOS "mark" in use - use the EXIT command to restore memory The specified SWAPDOS "mark" has already been used to SWAP out an application. Either you want to swap to a different mark, or you want to EXIT and restore memory before swapping again. XMS Error nn function mm The XMS memory manager returned error nn while processing function mm. You can use the /D option to bypass this problem. Please contact IDC technical support if you encounter this error. Your application appears to have hooked an interrupt vector One or more system interrupt vectors point at memory used by the application you are trying to swap out. You must use the Mark/Long Swap method in order to swap out this application. Your application appears to control the EGA/VGA Configuration Region The application you are trying to swap out has taken control of the EGA/VGA configuration pointers. You must use the Mark/Long Swap method in order to swap out this application. Your application does not have an environment The application you are trying to swap out appears to have deallocated its environment. SWAPDOS will not swap out applications that have deallocated their environment. Page 20 SWAPDOS 1.00 Documentation If Something Goes Wrong If SWAPDOS cannot operate correctly it should issue an error message that describes the problem. If you encounter an error message, please check the section titled "Exit Codes and Error Messages". Most message descriptions include a probable cause that may make it easy for you to quickly identify the problem. If that doesn't help, or if you don't get an error message from SWAPDOS, these steps will help identify the problem: - Try to swap out a different application. SWAPDOS is known to be compatible with dBASE III Plus, dBASE IV, 1-2-3, WordPerfect, KEDIT, and the other programs which have examples in the preceding sections. If SWAPDOS works with other applications on your system then it is possible that SWAPDOS is incompatible with the application you are trying to swap. - Try specifying a different command on the SWAPDOS command line. For example, "SWAPDOS VER" (VER is an internal DOS command that displays the DOS version number). If this works, it is possible that SWAPDOS is incompatible with the program you are trying to run while your application is swapped out. - Use the /S=1 option to force SWAPDOS to write to disk. if this solves the problem, then there might be a problem with your EMS software or hardware. - Rename your AUTOEXEC.BAT and CONFIG.SYS, reboot your computer, and try to recreate the problem. If the problem does not occur during this test, then there is probably a conflict between SWAPDOS and a TSR (Terminate and Stay Resident program) loaded by your AUTOEXEC.BAT or a device driver loaded in your CONFIG.SYS. To determine which one is causing the conflict you can rebuild your AUTOEXEC.BAT and CONFIG.SYS one line at a time, and reboot and rerun SWAPDOS after each change until the problem occurs. This should pinpoint the conflicting program. Sometimes rearranging the order in which TSRs are loaded can eliminate the conflict. Otherwise you may not be able to use SWAPDOS while this program is loaded. Direct telephone support is only guaranteed for registered users. Non- registered users will be supported directly only as time permits. The quickest and easiest way to get technical support, registered or not, is to contact Chip Rabinowitz at Compuserve 70731,20, MCIMAIL 315-5415, or FAX 1-215-886-4225. You may also write to Innovative Data Concepts at the address above, or call 1-215-884-3373. Commonly Asked Questions What kind of applications can't SWAPDOS handle? This version of SWAPDOS cannot swap out most networking software. Communications programs which depend on continuous access to interrupt vectors tend to lock up if you swap them out while they are communicating with another system. Multitasking programs like DesqView and Windows which do not use the Intel 80386 virtual machine features can rearrange DOS memory while SWAPDOS is SWAPDOS 1.00 Documentation Page 21 running (kind of like pulling the rug out under your feet), resulting in the "Memory is too fragmented to swap" message. However, since these programs provide their own facilities for overcoming memory constraints, you generally would not use SWAPDOS with these products. Programs which "hook" into DOS instead of modifying interrupt vectors. For example, the FASTOPEN and APPEND commands cannot be swapped out, because they modify undocumented areas of memory reserved for use by DOS. What vectors does SWAPDOS hook? SWAPDOS doesn't "hook" any interrupt vectors. SWAPDOS copies and restores the system's interrupt vector table at critical points (e.g. before and after swapping out an application) to avoid system crashes, but SWAPDOS never takes control of any interrupt vectors. Is SWAPDOS a TSR? SWAPDOS only uses the "terminate and stay resident" feature of DOS when you use the /M option. The only thing that stays resident is a program "signature" and copy of the current system interrupt vectors. This is done so that the vectors can be restored when you use the /L option. Why doesn't SWAPDOS set the DOS exit code to the exit code returned by the program I specified on the SWAPDOS command line? SWAPDOS runs the program you specified via COMMAND.COM, the DOS command processor. COMMAND.COM does not return the error level set by the specified program, so SWAPDOS does not have access to the error level. Instead SWAPDOS sets the error level to indicate the success of the swapping operation, as described in section titled "Error Message Descriptions". Page 22 SWAPDOS 1.00 Documentation What features are planned for future releases? While we haven't committed to any new features or release dates, here are a few of the things we are considering: - Support for swapping network software - OBJ file for inclusion in other EXE files - Ability to automatically unload TSRs loaded after a "mark" - Optional data compression to reduce the time it takes to swap - "Hotkey" to switch between swapped applications - "High" DOS memory support - Full-blown task-switching COPYRIGHT NOTICE AND LICENSE Innovative Data Concepts, the copyright owner for The SWAP Utilities, hereby licenses you to: use the software; make as many copies of the shareware version of this software and documentation as you wish; give exact copies of the original shareware version to anyone; and distribute the shareware version of the software and documentation in its unmodified form via electronic means. There is no charge for any of the above. This is not free software. This license allows you to use this software without charge for a period of 30 days. Any use of The SWAP Utilities past this 30-day period is in violation of federal copyright laws and will be prosecuted. No copy of the software may be distributed or given away without this accompanying documentation; this notice must not be removed. ONLY COPIES OF THE SHAREWARE VERSION MAY BE DISTRIBUTED IN ANY FORM. IDC will provide disks with the shareware versions of ALL SWAP Utilities programs upon written request. Warranty There is no warranty of any kind associated with this software, and the copyright owner is not liable for damages of any kind. By using this software, you agree to this. Every effort has been made by Innovative Data Concepts to make this product bug-free. However, the nature of software development is that it is impossible to guarantee bug-free software. If a registered user reports a verifiable bug, the user will receive a free upgrade to the next version of The SWAP Utilities. SWAPDOS 1.00 Documentation Page 23 COPYRIGHT NOTICE AND LICENSE (cont.) Registration Upon receipt of the appropriate registration fee, Innovative Data Concepts will send the user a printed copy of this documentation, a disk containing a version of SWAPDOS without the shareware registration screen, and a registration number entitling the user to upgrades and telephone support. Registered users will also be given a toll-free number that will permit them to receive a free Compuserve Intro-Pak, along with a $15 usage credit. Bulletin Boards, Users Groups and Disk Vendors Bulletin Board Sysops and User Groups are encouraged to fill out the form below, which will automatically place them on a mailing list to receive the latest version of all IDC shareware products as they are released, as well as upgrades to already existing programs. There is no fee for this service. Disk Vendors who wish to distribute The SWAP Utilities must satisfy one of the following requirements: 1) The vendor must have been accepted as an associate member of the Association of Shareware Professionals; or 2) The vendor must agree to abide by the standards for disk vendors, as set forth by the Association of Shareware Professionals. Disk vendors who do not meet these requirements are NOT PERMITTED TO DISTRIBUTE THE SWAP UTILITIES UNDER ANY CIRCUMSTANCES! For information on obtaining ASP-approved status, contact: Vendor Membership Coordinator Association of Shareware Professionals P.O. Box 5786 Bellevue, WA 98006 UNDER NO CIRCUMSTANCES MAY THE SWAP UTILITIES BE DISTRIBUTED WITHOUT ALL ACCOMPANYING DOCUMENTATION FILES (INCLUDING THIS COMPLETE FILE), ALL PROGRAMS, AND OTHER MATERIALS PROVIDED WITH THE OFFICIAL COPIES FROM INNOVATIVE DATA CONCEPTS. ANY SUCH DISTRIBUTION OF THE SWAP UTILITIES OR ITS RELATED FILES, EXCEPT AS PROVIDED FOR IN THIS LICENSE, SHALL BE DETERMINED TO BE IN VIOLATION OF FEDERAL COPYRIGHT LAWS AND WILL BE PROSECUTED. Page 24 SWAPDOS 1.00 Documentation About Innovative Data Concepts Innovative Data Concepts is a consulting firm owned and operated by Chip Rabinowitz, specializing in Ram-Resident programs, communications, printing, video and more. Rabinowitz is an Assistant Sysop on the Computer Language Magazine Forum on CompuServe Information Service and also provides technical support for Borland International as a member of "Team Borland" on their Compuserve Forums, in the areas of Turbo C, Turbo Assembler, Turbo Debugger, and SideKick Plus. He is also the leader of the TesSeRact Development Team, a group pushing for Ram-Resident Programming Standards. The technique used to swap these applications may be applied to other resident programs as well, and Innovative Data Concepts is currently investigating other possible SWAP?? programs. If you have any suggestions/comments, please contact IDC. A similar technique may also be directly incorporated into resident programs; for more information, please contact IDC directly. The Rest of The SWAP Utilities The SWAP Utilities is a set of memory-saving utilities from Innovative Data Concepts. There are currently eight SWAP?? programs available, which allow you to run eight popular Ram-Resident programs in less than 7000 bytes of memory (SWAPSP - 7400, SWAPMT 8200), far less than they require under normal circumstances. The following SWAP Utilities are currently available: SWAPSK(TM) -- For SideKick SWAPSP(TM) -- For SideKick Plus SWAPTN(TM) -- For Tornado SWAPMT(TM) -- For Metro SWAPMM(TM) -- For MemoryMate SWAPSH(TM) -- For PCTools Shell SWAPDT(TM) -- For PCTools Desktop SWAPNG(TM) -- For The Norton Guides For more information about The SWAP Utilities, contact Innovative Data Concepts, or see the accompanying ORDER.DOC file. SWAPDOS 1.00 Documentation Page 25 Association of Shareware Professionals Innovative Data Concepts is a member of the Association of Shareware Professionals (ASP), an organization formed in April 1987 to strengthen the future of shareware (user-supported software) as an alternative to commercial software. Its members, all of whom are programmers who subscribe to a code of ethics, are committed to the concept of shareware as a method of marketing. ASP has established stringent standards for its members. ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a problem with an ASP member (other than technical support), ASP may be able to help. Please write to the ASP Ombudsman at P.O. Box 5786, Bellevue, WA 98006. The primary goals of the ASP are: To inform users about shareware programs and about shareware as a method of distributing and marketing software; To encourage broader distribution of shareware through user groups and disk dealers who agree to identify and explain the nature of shareware; To assist members in marketing their software; To provide a forum through which ASP members may communicate, share ideas, and learn from each other; and To foster a high degree of professionalism among shareware authors by setting programming, marketing, and support standards for ASP members to follow. Standards for the Association of Shareware Professionals PROGRAMMING STANDARDS: The program meets the ASP's definition of "shareware" (i.e., it is not a commercial demo with major feature disabled, nor a time- limited program). The program has been thoroughly tested by the author and should not be harmful to other files or hardware if used properly. DOCUMENTATION STANDARDS: Sufficient documentation is provided to allow the average user to try all the major functions of the program. Any discussion of the shareware concept and of registration requirements is done in a professional and positive manner. SUPPORT STANDARDS: The member will respond to people who send registration payments, as promised in the program's documentation. At a minimum, the member will acknowledge receipt of all payments. Page 26 SWAPDOS 1.00 Documentation The member will establish a procedure for users to report, and have acknowledged, matters such as bug reports, and will describe such means in the documentation accompanying all versions of the programs. The author will respond to written bug reports from registered users when the user provides a self-addressed, stamped envelope. Known incompatibilities with other software or hardware and major or unusual program limitations are noted in the documentation that comes with the shareware (evaluation) program. GENERAL: Members will keep the ASP apprised of changes in mailing address; which shareware programs they have published and are currently supporting; the current version numbers; and of any changes in the status of their programs. If a user has a dispute with an ASP member-author, the user may appeal to the ASP to mediate for arbitration of the dispute. For more information about the Association of Shareware Professionals, contact Paul Mayer, Membership Coordinator of the ASP, at Compuserve 70040,645, or write the ASP at P.O. Box 5786, Bellevue, WA 98006. SWAPDOS 1.00 Documentation Page 27