home *** CD-ROM | disk | FTP | other *** search
- NEWPRN.SYS
- INSTALLATION INSTRUCTIONS
-
- NEWPRN.SYS is an installable device driver for use with COMPAQ
- Deskpro 386 and 286-based COMPAQs that are experiencing problems
- with printing on an HP LaserJet running off of the parallel printer
- port. It will speed up the printing when downloading fonts and
- printing long, complex graphics jobs.
-
- SYSTEM REQUIREMENTS:
-
- any COMPAQ Deskpro 386 or 286-based COMPAQs
- COMPAQ MS-DOS Version 3.1 or greater
-
-
- WHO SHOULD USE:
-
- Use this program if you are having problems with HP LaserJet
- printers printing slowly with the Compaq Deskpro 386 or 286-based
- COMPAQs.
-
- HOW TO USE:
-
- 1. Copy the program NEWPRN.SYS from the distribution diskette
- to your system diskette or fixed disk.
-
- 2. Using an editor, add a line to your CONFIG.SYS file to
- execute the command at system boot.
-
- 3. The syntax of the program is:
-
- DEVICE=[d:][path]NEWPRN.SYS
-
- Comments:
-
- There are no command line parameters.
-
- 4. When the package is successfully installed, you will get
- the following message:
-
- NEWPRN.SYS V1.10 Installed
- (C) Copyright COMPAQ Computer Corp. 1987
-
- If the package is not successfully installed, an error message
- will be generated.
-
-
-
-
- EFFECTS ON YOUR SYSTEM:
-
- 1. Since this is a device driver it will use approximately
- 1000 bytes of system memory.
-
- 2. Once installed, the patch can not be uninstalled until
- you reboot your computer.
-
-
-