home *** CD-ROM | disk | FTP | other *** search
- ***** WARNING *****
-
- If your system DOES NOT POWER UP, you have NOT installed your coprocessor
- correctly. TURN OFF THE POWER IMMEDIATELY!
-
-
-
- The FasMath Processor and Demonstration Software are designed to run in
- an 80386 system only! The demonstration software will not run on an 80287.
-
-
-
- If your system passes its memory test but will not boot, you may have to
- set switches in your computer or run a configuration utility to configure
- your system for the numerics processor. Refer to your computers users
- manual for further details.
-
-
-
-
- Press <enter> to continue.
-
-
-
- FasMath Demonstration Software Installation
-
- TO INSTALL FASMATH DEMONSTRATION SOFTWARE ON TO YOUR HARDDISK or RAMDISK
- WITH THE DEMONSTRATION DISK INSTALLED IN FLOPPY DRIVE A.
-
- I) Change the default drive to your Harddisk or RAMdisk by typing:
-
- c: <enter> Where c is the letter of the new drive.
-
- II) Create a directory called FasMath by typing
-
- MD \FASMATH <enter>
-
- III) Change directory to FasMath by typing
-
- CD \FASMATH <enter>
-
- IV) Copy demonstration files from floppy disk to Harddisk or RAMdisk
-
- COPY A:. <enter> [NOTE: type the period (.) after the colon]
-
-
- Press <enter> to continue.
-
- V) Run FasMath demonstrations by typing
-
- FASMATH <enter>
-
-
-
-
- NOTE: The FasMath demonstration diskette contains a file called
- GLOSSARY.TXT which defines some of the terms used in the
- demonstration. To print the glossary type:
-
- PRINT GLOSSARY.TXT <enter>
-
-
-
-
- FasMath is a registered trade mark of Cyrix Corp.
-
-
-
-
-