home *** CD-ROM | disk | FTP | other *** search
- This pair of programs represents a recently "cleaned up" version of a
- couple of quick-and-dirty programs I wrote about a month ago and have
- been using with no problems on several different PC/AT-type machines.
-
- There are two programs: 800KFMAT.COM and 800K.COM.
-
- To format a low-density diskette to 800k bytes in a high-density
- drive, just use 800KFMAT the same way DOS FORMAT is used (i.e.
- "800KFMAT A:"). This will still use the 300kbs data rate compatible
- with the permittivity of these disk surfaces, but will format
- 80 cylinders with 10 sectors per track. A boot sector obtained
- from the default drive will be written to the diskette with a
- modified BIOS parameter block. Also, a file allocation table will
- be set up with bad clusters marked as usual.
-
- Once formatted in this way, DOS (at least 3.0 or later) has no
- problem in using the disk since it reads the BIOS parameter block
- to determine the configuration. However, some BIOS ROMs will
- stubbornly refuse to single-step the drive when they detect the
- lower data rate. To fix this problem, the memory-resident program
- 800K.COM intercepts INT 13h BIOS calls and clears the "double step"
- bit at 40:90 (or 40:91 for B:) before and after every disk I/O call.
- This seems to do the job, at least for the several BIOS ROMs tested
- so far. To install 800K.COM for drive A: "800K/A". To install for
- both drives: "800K/A/B". To un-install so that "normal" diskettes
- may be used: "800K/U".
-
- You might first try using the 800k diskette without 800K.COM, as
- at least one BIOS I have tested (Big Blue!) does it right and does
- not require any help.
-
- -- Alan D. Jones
- [ 74030,554 ]