Otherware

home *** CD-ROM | disk | FTP | other *** search

/ Otherware / Otherware_1_SB_Development.iso / amiga / utility / misc / e1858src.lha / emacs-18.58 / src / process.c < prev next >

Wrap

C/C++ Source or Header | 1992-08-15 | 72.6 KB | 2,741 lines

/* Asynchronous subprocess control for GNU Emacs. Copyright (C) 1985, 1986, 1987, 1988, 1990 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <signal.h> #include "config.h" #ifdef VMS /* Prevent the file from being totally empty. */ static dummy () {} #endif #ifdef subprocesses /* The entire file is within this conditional */ #include <stdio.h> #include <errno.h> #include <setjmp.h> #include <sys/types.h> /* some typedefs are used in sys/file.h */ #include <sys/file.h> #include <sys/stat.h> #ifdef HAVE_SOCKETS /* TCP connection support, if kernel can do it */ #include <sys/socket.h> #include <netdb.h> #include <netinet/in.h> #endif /* HAVE_SOCKETS */ #if defined(BSD) || defined(STRIDE) #include <sys/ioctl.h> #if !defined (O_NDELAY) && defined (HAVE_PTYS) #include <fcntl.h> #endif /* HAVE_PTYS and no O_NDELAY */ #endif /* BSD or STRIDE */ #ifdef USG #ifndef NO_TERMIO #include <termio.h> #endif #include <fcntl.h> #endif /* USG */ #ifdef NEED_BSDTTY #include <sys/bsdtty.h> #endif #ifdef NEED_TERMIOS #include <sys/termios.h> #endif #ifdef TRITON88 /* To make emacs send C-c correctly in shell */ #define TIOCGPGRP FIOGETOWN #endif #ifdef HPUX #undef TIOCGPGRP #endif /* Include time.h or sys/time.h or both. */ #include "gettime.h" #if defined (HPUX) && defined (HAVE_PTYS) #include <sys/ptyio.h> #endif #ifdef AIX #include <sys/pty.h> #include <unistd.h> #endif /* AIX */ #ifdef SYSV_PTYS #include <sys/tty.h> #include <sys/pty.h> #endif #ifdef XENIX #undef TIOCGETC /* Avoid confusing some conditionals that test this. */ #endif #ifdef BROKEN_TIOCGETC #undef TIOCGETC #endif #ifdef BROKEN_O_NONBLOCK #undef O_NONBLOCK #endif #undef NULL #include "lisp.h" #include "window.h" #include "buffer.h" #include "process.h" #include "termhooks.h" #include "termopts.h" #include "commands.h" #include "dispextern.h" Lisp_Object Qrun, Qstop, Qsignal, Qopen, Qclosed; extern Lisp_Object Qexit; /* a process object is a network connection when its childp field is neither Qt nor Qnil but is instead a string (name of foreign host we are connected to + name of port we are connected to) */ #ifdef HAVE_SOCKETS #define NETCONN_P(p) (XGCTYPE (XPROCESS (p)->childp) == Lisp_String) #else #define NETCONN_P(p) 0 #endif /* HAVE_SOCKETS */ /* Define SIGCHLD as an alias for SIGCLD. There are many conditionals testing SIGCHLD. */ #if !defined (SIGCHLD) && defined (SIGCLD) #define SIGCHLD SIGCLD #endif /* SIGCLD */ #include "emacssignal.h" /* Define the structure that the wait system call stores. On many systems, there is a structure defined for this. But on vanilla-ish USG systems there is not. */ #ifndef WAITTYPE #if !defined (BSD) && !defined (UNIPLUS) && !defined (STRIDE) && !(defined (HPUX) && !defined (NOMULTIPLEJOBS)) && !defined (HAVE_WAIT_HEADER) #define WAITTYPE int #define WIFSTOPPED(w) ((w&0377) == 0177) #define WIFSIGNALED(w) ((w&0377) != 0177 && (w&~0377) == 0) #define WIFEXITED(w) ((w&0377) == 0) #define WRETCODE(w) (w >> 8) #define WSTOPSIG(w) (w >> 8) #define WCOREDUMP(w) ((w&0200) != 0) #define WTERMSIG(w) (w & 0377) #else #ifdef BSD4_1 #include <wait.h> #else #include <sys/wait.h> #endif /* not BSD 4.1 */ #define WAITTYPE union wait #define WRETCODE(w) w.w_retcode #define WCOREDUMP(w) w.w_coredump #ifdef HPUX /* HPUX version 7 has broken definitions of these. */ #undef WTERMSIG #undef WSTOPSIG #undef WIFSTOPPED #undef WIFSIGNALED #undef WIFEXITED #endif #ifndef WTERMSIG #define WTERMSIG(w) w.w_termsig #endif #ifndef WSTOPSIG #define WSTOPSIG(w) w.w_stopsig #endif #ifndef WIFSTOPPED #define WIFSTOPPED(w) (WTERMSIG (w) == 0177) #endif #ifndef WIFSIGNALED #define WIFSIGNALED(w) (WTERMSIG (w) != 0177 && (WSTOPSIG (w)) == 0) #endif #ifndef WIFEXITED #define WIFEXITED(w) (WTERMSIG (w) == 0) #endif #endif /* BSD or UNIPLUS or STRIDE */ #endif /* no WAITTYPE */ extern errno; extern sys_nerr; extern char *sys_errlist[]; #ifndef BSD4_1 extern char *sys_siglist[]; #else char *sys_siglist[] = { "bum signal!!", "hangup", "interrupt", "quit", "illegal instruction", "trace trap", "iot instruction", "emt instruction", "floating point exception", "kill", "bus error", "segmentation violation", "bad argument to system call", "write on a pipe with no one to read it", "alarm clock", "software termination signal from kill", "status signal", "sendable stop signal not from tty", "stop signal from tty", "continue a stopped process", "child status has changed", "background read attempted from control tty", "background write attempted from control tty", "input record available at control tty", "exceeded CPU time limit", "exceeded file size limit" }; #endif #ifdef vipc #include "vipc.h" extern int comm_server; extern int net_listen_address; #endif /* vipc */ /* Communicate exit status of synch process to callproc.c. */ extern int synch_process_retcode; extern char *synch_process_death; /* t means use pty, nil means use a pipe, maybe other values to come. */ Lisp_Object Vprocess_connection_type; #ifdef SKTPAIR #ifndef HAVE_SOCKETS #include <sys/socket.h> #endif #endif /* SKTPAIR */ /* Number of events of change of status of a process. */ int process_tick; /* Number of events for which the user or sentinel has been notified. */ int update_tick; int delete_exited_processes; #ifdef FD_SET /* We could get this from param.h, but better not to depend on finding that. And better not to risk that it might define other symbols used in this file. */ #define MAXDESC 64 #define SELECT_TYPE fd_set #else /* no FD_SET */ #define MAXDESC 32 #define SELECT_TYPE int /* Define the macros to access a single-int bitmap of descriptors. */ #define FD_SET(n, p) (*(p) |= (1 << (n))) #define FD_CLR(n, p) (*(p) &= ~(1 << (n))) #define FD_ISSET(n, p) (*(p) & (1 << (n))) #define FD_ZERO(p) (*(p) = 0) #endif /* no FD_SET */ /* Mask of bits indicating the descriptors that we wait for input on */ SELECT_TYPE input_wait_mask; /* Indexed by descriptor, gives the process (if any) for that descriptor */ Lisp_Object chan_process[MAXDESC]; /* Alist of elements (NAME . PROCESS) */ Lisp_Object Vprocess_alist; Lisp_Object Qprocessp; Lisp_Object get_process (); /* Buffered-ahead input char from process, indexed by channel. -1 means empty (no char is buffered). Used on sys V where the only way to tell if there is any output from the process is to read at least one char. Always -1 on systems that support FIONREAD. */ int proc_buffered_char[MAXDESC]; /* These variables hold the filter about to be run, and its args, between read_process_output and run_filter. Also used in exec_sentinel for sentinels. */ Lisp_Object this_filter; Lisp_Object filter_process, filter_string; /* Compute the Lisp form of the process status, p->status, from the numeric status that was returned by `wait'. */ update_status (p) struct Lisp_Process *p; { union { int i; WAITTYPE wt; } u; u.i = XFASTINT (p->raw_status_low) + (XFASTINT (p->raw_status_high) << 16); p->status = status_convert (u.wt); p->raw_status_low = Qnil; p->raw_status_high = Qnil; } /* Convert a process status word in Unix format to the list that we use internally. */ Lisp_Object status_convert (w) WAITTYPE w; { if (WIFSTOPPED (w)) return Fcons (Qstop, Fcons (make_number (WSTOPSIG (w)), Qnil)); else if (WIFEXITED (w)) return Fcons (Qexit, Fcons (make_number (WRETCODE (w)), WCOREDUMP (w) ? Qt : Qnil)); else if (WIFSIGNALED (w)) return Fcons (Qsignal, Fcons (make_number (WTERMSIG (w)), WCOREDUMP (w) ? Qt : Qnil)); else return Qrun; } /* Given a status-list, extract the three pieces of information and store them individually through the three pointers. */ void decode_status (l, symbol, code, coredump) Lisp_Object l; Lisp_Object *symbol; int *code; int *coredump; { Lisp_Object tem; if (XTYPE (l) == Lisp_Symbol) { *symbol = l; *code = 0; *coredump = 0; } else { *symbol = XCONS (l)->car; tem = XCONS (l)->cdr; *code = XFASTINT (XCONS (tem)->car); tem = XFASTINT (XCONS (tem)->cdr); *coredump = !NULL (tem); } } /* Return a string describing a process status list. */ Lisp_Object status_message (status) Lisp_Object status; { Lisp_Object symbol; int code, coredump; Lisp_Object string, string2; decode_status (status, &symbol, &code, &coredump); if (EQ (symbol, Qsignal) || EQ (symbol, Qstop)) { string = build_string (code < NSIG ? sys_siglist[code] : "unknown"); string2 = build_string (coredump ? " (core dumped)\n" : "\n"); XSTRING (string)->data[0] = DOWNCASE (XSTRING (string)->data[0]); return concat2 (string, string2); } else if (EQ (symbol, Qexit)) { if (code == 0) return build_string ("finished\n"); string = Fint_to_string (make_number (code)); string2 = build_string (coredump ? " (core dumped)\n" : "\n"); return concat2 (build_string ("exited abnormally with code "), concat2 (string, string2)); } else return Fcopy_sequence (Fsymbol_name (symbol)); } #ifdef HAVE_PTYS /* Open an available pty, returning a file descriptor. Return -1 on failure. The file name of the terminal corresponding to the pty is left in the variable pty_name. */ char pty_name[24]; int allocate_pty () { struct stat stb; register c, i; int fd; #ifdef PTY_ITERATION PTY_ITERATION #else for (c = FIRST_PTY_LETTER; c <= 'z'; c++) for (i = 0; i < 16; i++) #endif { #ifdef PTY_NAME_SPRINTF PTY_NAME_SPRINTF #else #ifdef HPUX sprintf (pty_name, "/dev/ptym/pty%c%x", c, i); #else #ifdef RTU sprintf (pty_name, "/dev/pty%x", i); #else sprintf (pty_name, "/dev/pty%c%x", c, i); #endif /* not RTU */ #endif /* not HPUX */ #endif /* no PTY_NAME_SPRINTF */ #ifdef PTY_OPEN PTY_OPEN; #else /* no PTY_OPEN */ #ifndef IRIS if (stat (pty_name, &stb) < 0) return -1; #ifdef O_NONBLOCK fd = open (pty_name, O_RDWR | O_NONBLOCK, 0); #else fd = open (pty_name, O_RDWR | O_NDELAY, 0); #endif #else /* Unusual IRIS code */ fd = open ("/dev/ptc", O_RDWR | O_NDELAY, 0); if (fd < 0) return -1; if (fstat (fd, &stb) < 0) return -1; #endif /* IRIS */ #endif /* no PTY_OPEN */ if (fd >= 0) { /* check to make certain that both sides are available this avoids a nasty yet stupid bug in rlogins */ #ifdef PTY_TTY_NAME_SPRINTF PTY_TTY_NAME_SPRINTF #else /* In version 19, make these special cases use the macro above. */ #ifdef HPUX sprintf (pty_name, "/dev/pty/tty%c%x", c, i); #else #ifdef RTU sprintf (pty_name, "/dev/ttyp%x", i); #else #ifdef IRIS sprintf (pty_name, "/dev/ttyq%d", minor (stb.st_rdev)); #else sprintf (pty_name, "/dev/tty%c%x", c, i); #endif /* not IRIS */ #endif /* not RTU */ #endif /* not HPUX */ #endif /* no PTY_TTY_NAME_SPRINTF */ #ifndef UNIPLUS if (access (pty_name, 6) != 0) { close (fd); #ifndef IRIS continue; #else return -1; #endif /* IRIS */ } #endif /* not UNIPLUS */ setup_pty (fd); return fd; } } return -1; } #endif /* HAVE_PTYS */ Lisp_Object make_process (name) Lisp_Object name; { register Lisp_Object val, tem, name1; register struct Lisp_Process *p; char suffix[10]; register int i; /* size of process structure includes the vector header, so deduct for that. But struct Lisp_Vector includes the first element, thus deducts too much, so add it back. */ val = Fmake_vector (make_number ((sizeof (struct Lisp_Process) - sizeof (struct Lisp_Vector) + sizeof (Lisp_Object)) / sizeof (Lisp_Object)), Qnil); XSETTYPE (val, Lisp_Process); p = XPROCESS (val); XFASTINT (p->infd) = 0; XFASTINT (p->outfd) = 0; XFASTINT (p->pid) = 0; XFASTINT (p->tick) = 0; XFASTINT (p->update_tick) = 0; p->raw_status_low = Qnil; p->raw_status_high = Qnil; p->status = Qrun; p->mark = Fmake_marker (); /* If name is already in use, modify it until it is unused. */ name1 = name; for (i = 1; ; i++) { tem = Fget_process (name1); if (NULL (tem)) break; sprintf (suffix, "<%d>", i); name1 = concat2 (name, build_string (suffix)); } name = name1; p->name = name; Vprocess_alist = Fcons (Fcons (name, val), Vprocess_alist); return val; } remove_process (proc) register Lisp_Object proc; { register Lisp_Object pair; pair = Frassq (proc, Vprocess_alist); Vprocess_alist = Fdelq (pair, Vprocess_alist); Fset_marker (XPROCESS (proc)->mark, Qnil, Qnil); deactivate_process (proc); } DEFUN ("processp", Fprocessp, Sprocessp, 1, 1, 0, "Return t if OBJECT is a process.") (obj) Lisp_Object obj; { return XTYPE (obj) == Lisp_Process ? Qt : Qnil; } DEFUN ("get-process", Fget_process, Sget_process, 1, 1, 0, "Return the process named NAME, or nil if there is none.") (name) register Lisp_Object name; { if (XTYPE (name) == Lisp_Process) return name; CHECK_STRING (name, 0); return Fcdr (Fassoc (name, Vprocess_alist)); } DEFUN ("get-buffer-process", Fget_buffer_process, Sget_buffer_process, 1, 1, 0, "Return the (or, a) process associated with BUFFER.\n\ BUFFER may be a buffer or the name of one.") (name) register Lisp_Object name; { register Lisp_Object buf, tail, proc; if (NULL (name)) return Qnil; buf = Fget_buffer (name); if (NULL (buf)) return Qnil; for (tail = Vprocess_alist; !NULL (tail); tail = Fcdr (tail)) { proc = Fcdr (Fcar (tail)); if (XTYPE (proc) == Lisp_Process && EQ (XPROCESS (proc)->buffer, buf)) return proc; } return Qnil; } /* This is how commands for the user decode process arguments */ Lisp_Object get_process (name) register Lisp_Object name; { register Lisp_Object proc; if (NULL (name)) proc = Fget_buffer_process (Fcurrent_buffer ()); else { proc = Fget_process (name); if (NULL (proc)) proc = Fget_buffer_process (Fget_buffer (name)); } if (!NULL (proc)) return proc; if (NULL (name)) error ("Current buffer has no process"); else error ("Process %s does not exist", XSTRING (name)->data); /* NOTREACHED */ } DEFUN ("delete-process", Fdelete_process, Sdelete_process, 1, 1, 0, "Delete PROCESS: kill it and forget about it immediately.\n\ PROCESS may be a process or the name of one, or a buffer name.") (proc) register Lisp_Object proc; { proc = get_process (proc); XPROCESS (proc)->raw_status_low = Qnil; XPROCESS (proc)->raw_status_high = Qnil; if (NETCONN_P (proc)) { XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (0), Qnil)); XSETINT (XPROCESS (proc)->tick, ++process_tick); } else if (XFASTINT (XPROCESS (proc)->infd)) { Fkill_process (proc, Qnil); /* Do this now, since remove_process will make sigchld_handler do nothing. */ XPROCESS (proc)->status = Fcons (Qsignal, Fcons (make_number (SIGKILL), Qnil)); XSETINT (XPROCESS (proc)->tick, ++process_tick); status_notify (); } remove_process (proc); return Qnil; } DEFUN ("process-status", Fprocess_status, Sprocess_status, 1, 1, 0, "Return the status of PROCESS: a symbol, one of these:\n\ run -- for a process that is running.\n\ stop -- for a process stopped but continuable.\n\ exit -- for a process that has exited.\n\ signal -- for a process that has got a fatal signal.\n\ open -- for a network stream connection that is open.\n\ closed -- for a network stream connection that is closed.\n\ nil -- if arg is a process name and no such process exists.") /* command -- for a command channel opened to Emacs by another process.\n\ external -- for an i/o channel opened to Emacs by another process.\n\ */ (proc) register Lisp_Object proc; { register struct Lisp_Process *p; register Lisp_Object status; proc = Fget_process (proc); if (NULL (proc)) return proc; p = XPROCESS (proc); if (!NULL (p->raw_status_low)) update_status (p); status = p->status; if (XTYPE (status) == Lisp_Cons) status = XCONS (status)->car; if (NETCONN_P (proc)) { if (EQ (status, Qrun)) status = Qopen; else if (EQ (status, Qexit)) status = Qclosed; } return status; } DEFUN ("process-exit-status", Fprocess_exit_status, Sprocess_exit_status, 1, 1, 0, "Return the exit status of PROCESS or the signal number that killed it.\n\ If PROCESS has not yet exited or died, return 0.\n\ If PROCESS is a net connection that was closed remotely, return 256.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); if (!NULL (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (XTYPE (XPROCESS (proc)->status) == Lisp_Cons) return XCONS (XCONS (XPROCESS (proc)->status)->cdr)->car; return make_number (0); } DEFUN ("process-id", Fprocess_id, Sprocess_id, 1, 1, 0, "Return the process id of PROCESS.\n\ This is the pid of the Unix process which PROCESS uses or talks to.\n\ For a network connection, this value is nil.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->pid; } DEFUN ("process-name", Fprocess_name, Sprocess_name, 1, 1, 0, "Return the name of PROCESS, as a string.\n\ This is the name of the program invoked in PROCESS,\n\ possibly modified to make it unique among process names.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->name; } DEFUN ("process-command", Fprocess_command, Sprocess_command, 1, 1, 0, "Return the command that was executed to start PROCESS.\n\ This is a list of strings, the first string being the program executed\n\ and the rest of the strings being the arguments given to it.\n\ For a non-child channel, this is nil.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->command; } DEFUN ("set-process-buffer", Fset_process_buffer, Sset_process_buffer, 2, 2, 0, "Set buffer associated with PROCESS to BUFFER (a buffer, or nil).") (proc, buffer) register Lisp_Object proc, buffer; { CHECK_PROCESS (proc, 0); if (!NULL (buffer)) CHECK_BUFFER (buffer, 1); XPROCESS (proc)->buffer = buffer; return buffer; } DEFUN ("process-buffer", Fprocess_buffer, Sprocess_buffer, 1, 1, 0, "Return the buffer PROCESS is associated with.\n\ Output from PROCESS is inserted in this buffer\n\ unless PROCESS has a filter.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->buffer; } DEFUN ("process-mark", Fprocess_mark, Sprocess_mark, 1, 1, 0, "Return the marker for the end of the last output from PROCESS.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->mark; } DEFUN ("set-process-filter", Fset_process_filter, Sset_process_filter, 2, 2, 0, "Give PROCESS the filter function FILTER; nil means no filter.\n\ When a process has a filter, each time it does output\n\ the entire string of output is passed to the filter.\n\ The filter gets two arguments: the process and the string of output.\n\ If the process has a filter, its buffer is not used for output.") (proc, filter) register Lisp_Object proc, filter; { CHECK_PROCESS (proc, 0); XPROCESS (proc)->filter = filter; return filter; } DEFUN ("process-filter", Fprocess_filter, Sprocess_filter, 1, 1, 0, "Returns the filter function of PROCESS; nil if none.\n\ See set-process-filter for more info on filter functions.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->filter; } DEFUN ("set-process-sentinel", Fset_process_sentinel, Sset_process_sentinel, 2, 2, 0, "Give PROCESS the sentinel SENTINEL; nil for none.\n\ The sentinel is called as a function when the process changes state.\n\ It gets two arguments: the process, and a string describing the change.") (proc, sentinel) register Lisp_Object proc, sentinel; { CHECK_PROCESS (proc, 0); XPROCESS (proc)->sentinel = sentinel; return sentinel; } DEFUN ("process-sentinel", Fprocess_sentinel, Sprocess_sentinel, 1, 1, 0, "Return the sentinel of PROCESS; nil if none.\n\ See set-process-sentinel for more info on sentinels.") (proc) register Lisp_Object proc; { CHECK_PROCESS (proc, 0); return XPROCESS (proc)->sentinel; } DEFUN ("process-kill-without-query", Fprocess_kill_without_query, Sprocess_kill_without_query, 1, 2, 0, "Say no query needed if PROCESS is running when Emacs is exited.\n\ Optional second argument if non-nil says to require a query.\n\ Value is t if a query was formerly required.") (proc, value) register Lisp_Object proc, value; { Lisp_Object tem; CHECK_PROCESS (proc, 0); tem = XPROCESS (proc)->kill_without_query; XPROCESS (proc)->kill_without_query = Fnull (value); return Fnull (tem); } Lisp_Object list_processes_1 () { register Lisp_Object tail, tem; Lisp_Object proc, minspace, tem1; register struct buffer *old = current_buffer; register struct Lisp_Process *p; register int state; char tembuf[80]; XFASTINT (minspace) = 1; set_buffer_internal (XBUFFER (Vstandard_output)); Fbuffer_flush_undo (Vstandard_output); current_buffer->truncate_lines = Qt; write_string ("\ Proc Status Buffer Command\n\ ---- ------ ------ -------\n", -1); for (tail = Vprocess_alist; !NULL (tail); tail = Fcdr (tail)) { Lisp_Object symbol; proc = Fcdr (Fcar (tail)); p = XPROCESS (proc); if (NULL (p->childp)) continue; Finsert (1, &p->name); Findent_to (make_number (13), minspace); if (!NULL (p->raw_status_low)) update_status (p); symbol = p->status; if (XTYPE (p->status) == Lisp_Cons) symbol = XCONS (p->status)->car; if (EQ (symbol, Qsignal)) { Lisp_Object tem; tem = Fcar (Fcdr (p->status)); if (XINT (tem) < NSIG) write_string (sys_siglist [XINT (tem)], -1); else Fprinc (symbol, Qnil); } else if (NETCONN_P (proc)) { if (EQ (symbol, Qrun)) write_string ("open", -1); else if (EQ (symbol, Qexit)) write_string ("closed", -1); else Fprinc (symbol, Qnil); } else Fprinc (symbol, Qnil); if (EQ (symbol, Qexit)) { Lisp_Object tem; tem = Fcar (Fcdr (p->status)); if (XFASTINT (tem)) { sprintf (tembuf, " %d", XFASTINT (tem)); write_string (tembuf, -1); } } if (EQ (symbol, Qsignal) || EQ (symbol, Qexit)) remove_process (proc); Findent_to (make_number (22), minspace); if (NULL (p->buffer)) InsStr ("(none)"); else if (NULL (XBUFFER (p->buffer)->name)) InsStr ("(Killed)"); else Finsert (1, &XBUFFER (p->buffer)->name); Findent_to (make_number (37), minspace); if (NETCONN_P (proc)) { sprintf (tembuf, "(network stream connection to %s)\n", XSTRING (p->childp)->data); InsStr (tembuf); } else { tem = p->command; while (1) { tem1 = Fcar (tem); Finsert (1, &tem1); tem = Fcdr (tem); if (NULL (tem)) break; InsStr (" "); } InsStr ("\n"); } } return Qnil; } DEFUN ("list-processes", Flist_processes, Slist_processes, 0, 0, "", "Display a list of all processes.\n\ \(Any processes listed as Exited or Signaled are actually eliminated\n\ after the listing is made.)") () { internal_with_output_to_temp_buffer ("*Process List*", list_processes_1, Qnil); return Qnil; } DEFUN ("process-list", Fprocess_list, Sprocess_list, 0, 0, 0, "Return a list of all processes.") () { return Fmapcar (Qcdr, Vprocess_alist); } DEFUN ("start-process", Fstart_process, Sstart_process, 3, MANY, 0, "Start a program in a subprocess. Return the process object for it.\n\ Args are NAME BUFFER PROGRAM &rest PROGRAM-ARGS\n\ NAME is name for process. It is modified if necessary to make it unique.\n\ BUFFER is the buffer or (buffer-name) to associate with the process.\n\ Process output goes at end of that buffer, unless you specify\n\ an output stream or filter function to handle the output.\n\ BUFFER may be also nil, meaning that this process is not associated\n\ with any buffer\n\ Third arg is program file name. It is searched for as in the shell.\n\ Remaining arguments are strings to give program as arguments.") (nargs, args) int nargs; register Lisp_Object *args; { Lisp_Object buffer, name, program, proc, tem; register unsigned char **new_argv; register int i; buffer = args[1]; if (!NULL (buffer)) buffer = Fget_buffer_create (buffer); name = args[0]; CHECK_STRING (name, 0); program = args[2]; CHECK_STRING (program, 2); new_argv = (unsigned char **) alloca ((nargs - 1) * sizeof (char *)); for (i = 3; i < nargs; i++) { tem = args[i]; CHECK_STRING (tem, i); new_argv[i - 2] = XSTRING (tem)->data; } new_argv[i - 2] = 0; new_argv[0] = XSTRING (program)->data; /* If program file name is not absolute, search our path for it */ if (new_argv[0][0] != '/') { tem = Qnil; openp (Vexec_path, program, "", &tem, 1); if (NULL (tem)) report_file_error ("Searching for program", Fcons (program, Qnil)); new_argv[0] = XSTRING (tem)->data; } proc = make_process (name); XPROCESS (proc)->childp = Qt; XPROCESS (proc)->command_channel_p = Qnil; XPROCESS (proc)->buffer = buffer; XPROCESS (proc)->sentinel = Qnil; XPROCESS (proc)->filter = Qnil; XPROCESS (proc)->command = Flist (nargs - 2, args + 2); create_process (proc, new_argv); return proc; } create_process_1 (signo) int signo; { #ifdef USG /* USG systems forget handlers when they are used; must reestablish each time */ signal (signo, create_process_1); #endif /* USG */ } #if 0 /* This doesn't work; see the note before sigchld_handler. */ #ifdef USG #ifdef SIGCHLD /* Mimic blocking of signals on system V, which doesn't really have it. */ /* Nonzero means we got a SIGCHLD when it was supposed to be blocked. */ int sigchld_deferred; create_process_sigchld () { signal (SIGCHLD, create_process_sigchld); sigchld_deferred = 1; } #endif #endif #endif create_process (process, new_argv) Lisp_Object process; char **new_argv; { int pid, inchannel, outchannel, forkin, forkout; int sv[2]; #ifdef SIGCHLD int (*sigchld)(); #endif char **env; int pty_flag = 0; extern char **environ; #ifdef MAINTAIN_ENVIRONMENT env = (char **) alloca (size_of_current_environ ()); get_current_environ (env); #else env = environ; #endif /* MAINTAIN_ENVIRONMENT */ inchannel = outchannel = -1; #ifdef HAVE_PTYS if (EQ (Vprocess_connection_type, Qt)) outchannel = inchannel = allocate_pty (); if (inchannel >= 0) { #ifndef USG /* On USG systems it does not work to open the pty's tty here and then close and reopen it in the child. */ #ifdef O_NOCTTY /* Don't let this terminal become our controlling terminal (in case we don't have one). */ forkout = forkin = open (pty_name, O_RDWR | O_NOCTTY, 0); #else forkout = forkin = open (pty_name, O_RDWR, 0); #endif if (forkin < 0) report_file_error ("Opening pty", Qnil); #else forkin = forkout = -1; #endif pty_flag = 1; } else #endif /* HAVE_PTYS */ #ifdef SKTPAIR { if (socketpair (AF_UNIX, SOCK_STREAM, 0, sv) < 0) report_file_error ("Opening socketpair", Qnil); outchannel = inchannel = sv[0]; forkout = forkin = sv[1]; } #else /* not SKTPAIR */ { int temp; temp = pipe (sv); if (temp < 0) goto io_failure; inchannel = sv[0]; forkout = sv[1]; temp = pipe (sv); if (temp < 0) goto io_failure; outchannel = sv[1]; forkin = sv[0]; } #endif /* not SKTPAIR */ #if 0 /* Replaced by close_process_descs */ set_exclusive_use (inchannel); set_exclusive_use (outchannel); #endif /* Stride people say it's a mystery why this is needed as well as the O_NDELAY, but that it fails without this. */ #ifdef STRIDE { int one = 1; ioctl (inchannel, FIONBIO, &one); } #endif #ifdef O_NONBLOCK fcntl (inchannel, F_SETFL, O_NONBLOCK); #else #ifdef O_NDELAY fcntl (inchannel, F_SETFL, O_NDELAY); #endif #endif XFASTINT (XPROCESS (process)->infd) = inchannel; XFASTINT (XPROCESS (process)->outfd) = outchannel; /* Record the tty descriptor used in the subprocess. */ #ifdef SYSV4_PTYS /* On system V.4, if using a pty, we need to keep a descriptor for the tty that the inferior uses, in order to get the pgrp. If this uses too many descriptors, we could instead save the tty name and reopen it to send signals. */ if (pty_flag) { int temp = dup (forkin); if (temp < 0) goto io_failure; XFASTINT (XPROCESS (process)->subtty) = temp; } else #endif XPROCESS (process)->subtty = Qnil; XPROCESS (process)->pty_flag = (pty_flag ? Qt : Qnil); XPROCESS (process)->status = Qrun; /* Record this as an active process, with its channels. As a result, child_setup will close Emacs's side of the pipes. */ chan_process[inchannel] = process; /* Delay interrupts until we have a chance to store the new fork's pid in its process structure */ #ifdef SIGCHLD #ifdef BSD4_1 sighold (SIGCHLD); #else /* not BSD4_1 */ #ifdef HPUX sigsetmask (sigmask (SIGCHLD)); #else /* not HPUX */ #if defined (BSD) || defined (UNIPLUS) sigsetmask (sigmask (SIGCHLD)); #else /* ordinary USG */ #if 0 sigchld_deferred = 0; sigchld = (int (*)()) signal (SIGCHLD, create_process_sigchld); #endif #endif /* ordinary USG */ #endif /* not HPUX */ #endif /* not BSD4_1 */ #endif /* SIGCHLD */ /* Until we store the proper pid, enable sigchld_handler to recognize an unknown pid as standing for this process. */ XSETINT (XPROCESS (process)->pid, -1); /* Turn on the bit for our input from this process now, so that even if the process terminates very soon, we can clear the bit properly on termination. If fork fails, remove_process will clear the bit. */ FD_SET (inchannel, &input_wait_mask); #ifdef AMIGA { register unsigned char *temp; if (XTYPE (current_buffer->directory) == Lisp_String) { register int i; i = XSTRING (current_buffer->directory)->size; temp = (unsigned char *) alloca (i + 1); bcopy (XSTRING (current_buffer->directory)->data, temp, i); temp[i] = 0; } pid = exec(new_argv[0], new_argv, forkin, forkout, temp, amiga_process_stack_size); } #else /* not AMIGA */ { /* child_setup must clobber environ on systems with true vfork. Protect it from permanent change. */ char **save_environ = environ; pid = vfork (); if (pid == 0) { int xforkin = forkin; int xforkout = forkout; #if 0 /* This was probably a mistake--it duplicates code later on, but fails to handle all the cases. */ /* Make SIGCHLD work again in the child. */ sigsetmask (SIGEMPTYMASK); #endif /* Make the pty be the controlling terminal of the process. */ #ifdef HAVE_PTYS /* First, disconnect its current controlling terminal. */ #ifdef HAVE_SETSID setsid (); #else /* not HAVE_SETSID */ #ifdef USG /* It's very important to call setpgrp() here and no time afterwards. Otherwise, we lose our controlling tty which is set when we open the pty. */ setpgrp (); #endif /* USG */ #endif /* not HAVE_SETSID */ #ifdef TIOCNOTTY /* In 4.3BSD, the TIOCSPGRP bug has been fixed, and now you can do TIOCSPGRP only to the process's controlling tty. */ if (pty_flag) { /* I wonder: would just ioctl (0, TIOCNOTTY, 0) work here? I can't test it since I don't have 4.3. */ int j = open ("/dev/tty", O_RDWR, 0); ioctl (j, TIOCNOTTY, 0); close (j); #ifndef USG /* In order to get a controlling terminal on some versions of BSD, it is necessary to put the process in pgrp 0 before it opens the terminal. */ setpgrp (0, 0); #endif } #endif /* TIOCNOTTY */ #if !defined (RTU) && !defined (UNIPLUS) /*** There is a suggestion that this ought to be a conditional on TIOCSPGRP. */ /* Now close the pty (if we had it open) and reopen it. This makes the pty the controlling terminal of the subprocess. */ if (pty_flag) { /* I wonder if close (open (pty_name, ...)) would work? */ if (xforkin >= 0) close (xforkin); xforkout = xforkin = open (pty_name, O_RDWR, 0); if (xforkin < 0) abort (); } #endif /* not UNIPLUS and not RTU */ #ifdef SETUP_SLAVE_PTY SETUP_SLAVE_PTY; #endif /* SETUP_SLAVE_PTY */ #ifdef AIX /* On AIX, we've disabled SIGHUP above once we start a child on a pty. Now reenable it in the child, so it will die when we want it to. */ if (pty_flag) signal (SIGHUP, SIG_DFL); #endif #endif /* HAVE_PTYS */ #ifdef SIGCHLD #ifdef BSD4_1 sigrelse (SIGCHLD); #else /* not BSD4_1 */ #if defined (BSD) || defined (UNIPLUS) || defined (HPUX) sigsetmask (SIGEMPTYMASK); #else /* ordinary USG */ #if 0 signal (SIGCHLD, sigchld); #endif #endif /* ordinary USG */ #endif /* not BSD4_1 */ #endif /* SIGCHLD */ child_setup_tty (xforkout); child_setup (xforkin, xforkout, xforkout, new_argv, env); } environ = save_environ; } #endif /* not AMIGA */ if (pid < 0) { remove_process (process); report_file_error ("Doing vfork", Qnil); } XFASTINT (XPROCESS (process)->pid) = pid; #ifndef AMIGA /* If the subfork execv fails, and it exits, this close hangs. I don't know why. So have an interrupt jar it loose. */ stop_polling (); signal (SIGALRM, create_process_1); alarm (1); if (forkin >= 0) close (forkin); alarm (0); start_polling (); if (forkin != forkout && forkout >= 0) close (forkout); #endif #ifdef SIGCHLD #ifdef BSD4_1 sigrelse (SIGCHLD); #else /* not BSD4_1 */ #if defined (BSD) || defined (UNIPLUS) || defined (HPUX) sigsetmask (SIGEMPTYMASK); #else /* ordinary USG */ #if 0 signal (SIGCHLD, sigchld); /* Now really handle any of these signals that came in during this function. */ if (sigchld_deferred) kill (getpid (), SIGCHLD); #endif #endif /* ordinary USG */ #endif /* not BSD4_1 */ #endif /* SIGCHLD */ return; io_failure: { int temp = errno; close (forkin); close (forkout); close (inchannel); close (outchannel); errno = temp; report_file_error ("Opening pty or pipe", Qnil); } } #ifdef HAVE_SOCKETS /* open a TCP network connection to a given HOST/SERVICE. Treated exactly like a normal process when reading and writing. Only differences are in status display and process deletion. A network connection has no PID; you cannot signal it. All you can do is deactivate and close it via delete-process */ DEFUN ("open-network-stream", Fopen_network_stream, Sopen_network_stream, 4, 4, 0, "Open a TCP connection for a service to a host.\n\ Returns a subprocess-object to represent the connection.\n\ Input and output work as for subprocesses; `delete-process' closes it.\n\ Args are NAME BUFFER HOST SERVICE.\n\ NAME is name for process. It is modified if necessary to make it unique.\n\ BUFFER is the buffer (or buffer-name) to associate with the process.\n\ Process output goes at end of that buffer, unless you specify\n\ an output stream or filter function to handle the output.\n\ BUFFER may be also nil, meaning that this process is not associated\n\ with any buffer\n\ Third arg is name of the host to connect to.\n\ Fourth arg SERVICE is name of the service desired, or an integer\n\ specifying a port number to connect to.") (name, buffer, host, service) Lisp_Object name, buffer, host, service; { Lisp_Object proc; register int i; struct sockaddr_in address; struct servent *svc_info; struct hostent *host_info; int s, outch, inch; char errstring[80]; int port; struct gcpro gcpro1, gcpro2, gcpro3, gcpro4; GCPRO4 (name, buffer, host, service); CHECK_STRING (name, 0); CHECK_STRING (host, 0); if (XTYPE(service) == Lisp_Int) port = htons ((unsigned short) XINT (service)); else { CHECK_STRING (service, 0); svc_info = getservbyname (XSTRING (service)->data, "tcp"); if (svc_info == 0) error ("Unknown service \"%s\"", XSTRING (service)->data); port = svc_info->s_port; } host_info = gethostbyname (XSTRING (host)->data); if (host_info == 0) error ("Unknown host \"%s\"", XSTRING(host)->data); bzero (&address, sizeof address); bcopy (host_info->h_addr, (char *) &address.sin_addr, host_info->h_length); address.sin_family = host_info->h_addrtype; address.sin_port = port; s = socket (host_info->h_addrtype, SOCK_STREAM, 0); if (s < 0) report_file_error ("error creating socket", Fcons (name, Qnil)); /* Kernel bugs (on Ultrix at least) cause lossage (not just EINTR) when connect is interrupted. So let's not let it get interrupted. */ if (interrupt_input) unrequest_sigio (); stop_polling (); while (1) { int value = connect (s, &address, sizeof address); /* Continue if successeful. */ if (value != -1) break; /* Report a "real" error. */ if (errno != EINTR) { close (s); error ("Host \"%s\" not responding", XSTRING (host)->data); } /* Loop around after temporary error. */ } if (interrupt_input) request_sigio (); start_polling (); inch = s; outch = dup (s); if (outch < 0) report_file_error ("error duplicating socket", Fcons (name, Qnil)); if (!NULL (buffer)) buffer = Fget_buffer_create (buffer); proc = make_process (name); chan_process[inch] = proc; #ifdef O_NONBLOCK fcntl (inch, F_SETFL, O_NONBLOCK); #else #ifdef O_NDELAY fcntl (inch, F_SETFL, O_NDELAY); #endif #endif XPROCESS (proc)->childp = host; XPROCESS (proc)->command_channel_p = Qnil; XPROCESS (proc)->buffer = buffer; XPROCESS (proc)->sentinel = Qnil; XPROCESS (proc)->filter = Qnil; XPROCESS (proc)->command = Qnil; XPROCESS (proc)->pid = Qnil; XPROCESS (proc)->kill_without_query = Qt; XFASTINT (XPROCESS (proc)->infd) = s; XFASTINT (XPROCESS (proc)->outfd) = outch; XPROCESS (proc)->status = Qrun; FD_SET (inch, &input_wait_mask); UNGCPRO; return proc; } #endif /* HAVE_SOCKETS */ deactivate_process (proc) Lisp_Object proc; { register int inchannel, outchannel; register struct Lisp_Process *p = XPROCESS (proc); inchannel = XFASTINT (p->infd); outchannel = XFASTINT (p->outfd); if (inchannel) { /* Beware SIGCHLD hereabouts. */ flush_pending_output (inchannel); close (inchannel); if (outchannel && outchannel != inchannel) close (outchannel); XFASTINT (p->infd) = 0; XFASTINT (p->outfd) = 0; chan_process[inchannel] = Qnil; FD_CLR (inchannel, &input_wait_mask); } } /* Close all descriptors currently in use for communication with subprocess. This is used in a newly-forked subprocess to get rid of irrelevant descriptors. */ close_process_descs () { int i; for (i = 0; i < MAXDESC; i++) { Lisp_Object process; process = chan_process[i]; if (!NULL (process)) { int in = XFASTINT (XPROCESS (process)->infd); int out = XFASTINT (XPROCESS (process)->outfd); if (in != 0) close (in); if (out != 0 && out != in) close (out); if (!NULL (XPROCESS (process)->subtty)) close (XFASTINT (XPROCESS (process)->subtty)); } } } DEFUN ("accept-process-output", Faccept_process_output, Saccept_process_output, 0, 1, 0, "Allow any pending output from subprocesses to be read by Emacs.\n\ It is read into the process' buffers or given to their filter functions.\n\ Non-nil arg PROCESS means do not return until some output has been received\n\ from PROCESS.") (proc) register Lisp_Object proc; { if (NULL (proc)) wait_reading_process_input (-1, 0, 0); else { proc = get_process (proc); wait_reading_process_input (0, XPROCESS (proc), 0); } return Qnil; } /* This variable is different from waiting_for_input in keyboard.c. It is used to communicate to a lisp process-filter/sentinel (via the function Fwaiting_for_user_input_p below) whether emacs was waiting for user-input when that process-filter was called. waiting_for_input cannot be used as that is by definition 0 when lisp code is being evalled */ static int waiting_for_user_input_p; /* Read and dispose of subprocess output while waiting for timeout to elapse and/or keyboard input to be available. time_limit is the timeout in seconds, or zero for no limit. -1 means gobble data available immediately but don't wait for any. read_kbd is 1 to return when input is available. -1 means caller will actually read the input. A pointer to a struct Lisp_Process means wait until something arrives from that process. do_display means redisplay should be done to show subprocess output that arrives. */ wait_reading_process_input (time_limit, read_kbd, do_display) int time_limit, read_kbd, do_display; { register int channel, nfds, m; SELECT_TYPE Available; SELECT_TYPE Exception; int xerrno; Lisp_Object proc; #ifdef HAVE_TIMEVAL struct timeval timeout, end_time, garbage; #else long timeout, end_time, temp; #endif /* not HAVE_TIMEVAL */ SELECT_TYPE Atemp; int wait_channel = 0; struct Lisp_Process *wait_proc = 0; extern kbd_count; /* Detect when read_kbd is really the address of a Lisp_Process. */ if (read_kbd > 10 || read_kbd < -1) { wait_proc = (struct Lisp_Process *) read_kbd; wait_channel = XFASTINT (wait_proc->infd); read_kbd = 0; } waiting_for_user_input_p = read_kbd; /* Since we may need to wait several times, compute the absolute time to return at. */ if (time_limit) { #ifdef HAVE_TIMEVAL gettimeofday (&end_time, &garbage); end_time.tv_sec += time_limit; #else /* not HAVE_TIMEVAL */ time (&end_time); end_time += time_limit; #endif /* not HAVE_TIMEVAL */ } #if 0 /* Select emulator claims to preserve alarms. And there are many ways to get out of this function by longjmp. */ /* Turn off periodic alarms (in case they are in use) because the select emulator uses alarms. */ stop_polling (); #endif while (1) { /* If calling from keyboard input, do not quit since we want to return C-g as an input character. Otherwise, do pending quit if requested. */ if (read_kbd >= 0) { #if 0 /* This is the same condition tested by QUIT. We need to resume polling if we are going to quit. */ if (!NULL (Vquit_flag) && NULL (Vinhibit_quit)) { start_polling (); QUIT; } #endif QUIT; } /* If status of something has changed, and no input is available, notify the user of the change right away */ if (update_tick != process_tick && do_display) { Atemp = input_wait_mask; #ifdef HAVE_TIMEVAL timeout.tv_sec=0; timeout.tv_usec=0; #else /* not HAVE_TIMEVAL */ timeout = 0; #endif /* not HAVE_TIMEVAL */ if (select (MAXDESC, &Atemp, 0, 0, &timeout) <= 0) status_notify (); } /* Don't wait for output from a non-running process. */ if (wait_proc != 0 && !NULL (wait_proc->raw_status_low)) update_status (wait_proc); if (wait_proc != 0 && ! EQ (wait_proc->status, Qrun)) break; if (fix_screen_hook) (*fix_screen_hook) (); /* Compute time from now till when time limit is up */ /* Exit if already run out */ if (time_limit == -1) { /* -1 specified for timeout means gobble output available now but don't wait at all. */ #ifdef HAVE_TIMEVAL timeout.tv_sec = 0; timeout.tv_usec = 0; #else timeout = 0; #endif /* not HAVE_TIMEVAL */ } else if (time_limit) { #ifdef HAVE_TIMEVAL gettimeofday (&timeout, &garbage); /* In effect, timeout = end_time - timeout. Break if result would be negative. */ if (timeval_subtract (&timeout, end_time, timeout)) break; #else /* not HAVE_TIMEVAL */ time (&temp); timeout = end_time - temp; if (timeout < 0) break; #endif /* not HAVE_TIMEVAL */ } else { #ifdef HAVE_TIMEVAL /* If no real timeout, loop sleeping with a big timeout so that input interrupt can wake us up by zeroing it */ timeout.tv_sec = 100; timeout.tv_usec = 0; #else /* not HAVE_TIMEVAL */ timeout = 100000; /* 100000 recognized by the select emulator */ #endif /* not HAVE_TIMEVAL */ } /* Cause quitting and alarm signals to take immediate action, and cause input available signals to zero out timeout */ if (read_kbd < 0) set_waiting_for_input (&timeout); /* Wait till there is something to do */ Available = Exception = input_wait_mask; if (!read_kbd) FD_CLR (0, &Available); if (read_kbd && kbd_count) nfds = 0; else /* Since we don't do anything abt Exceptions, let's notw wake up for them. */ nfds = select (MAXDESC, &Available, 0, 0, &timeout); #if 0 #ifdef IBMRTAIX nfds = select (MAXDESC, &Available, 0, 0, &timeout); #else #ifdef HPUX nfds = select (MAXDESC, &Available, 0, 0, &timeout); #else nfds = select (MAXDESC, &Available, 0, &Exception, &timeout); #endif #endif #endif /* 0 */ xerrno = errno; if (fix_screen_hook) (*fix_screen_hook) (); /* Make C-g and alarm signals set flags again */ clear_waiting_for_input (); /* If we woke up due to SIGWINCH, actually change size now. */ if (read_kbd) do_pending_window_change (); if (time_limit && nfds == 0) /* timeout elapsed */ break; if (nfds < 0) { if (xerrno == EINTR) FD_ZERO (&Available); #ifdef ALLIANT /* This happens for no known reason on ALLIANT. I am guessing that this is the right response. -- RMS. */ else if (xerrno == EFAULT) FD_ZERO (&Available); #endif else if (xerrno == EBADF) #ifdef AIX /* AIX will return EBADF on a call to select involving a ptc if the associated pts isn't open. Since this will only happen just as a child is dying, just ignore the situation -- SIGCHLD will come along quite quickly, and after cleanup the ptc will no longer be checked, so this error will stop recurring. */ FD_ZERO (&Available); /* Cannot depend on values returned. */ #else /* not AIX */ abort (); #endif /* not AIX */ else error("select error: %s", sys_errlist[xerrno]); } #if defined (sun) || defined (APOLLO) else if (nfds > 0 && FD_ISSET (0, &Available) && interrupt_input) /* System sometimes fails to deliver SIGIO. */ kill (getpid (), SIGIO); #endif /* Check for keyboard input */ /* If there is any, return immediately to give it higher priority than subprocesses */ if (read_kbd && detect_input_pending ()) break; /* If checking input just got us a size-change event from X, obey it now if we should. */ if (read_kbd) do_pending_window_change (); /* If screen size has changed, redisplay now for either sit-for or keyboard input. */ if (read_kbd && screen_garbaged) redisplay_preserve_echo_area (); #ifdef vipc /* Check for connection from other process */ if (FD_ISSET (comm_server, &Available)) { FD_CLR (comm_server, &Available); create_commchan (); } #endif /* vipc */ /* Check for data from a process or a command channel */ for (channel = 3; channel < MAXDESC; channel++) { if (FD_ISSET (channel, &Available)) { int nread; FD_CLR (channel, &Available); /* If waiting for this channel, arrange to return as soon as no more input to be processed. No more waiting. */ if (wait_channel == channel) { wait_channel = 0; time_limit = -1; } proc = chan_process[channel]; if (NULL (proc)) continue; #ifdef vipc /* It's a command channel */ if (!NULL (XPROCESS (proc)->command_channel_p)) { ProcessCommChan (channel, proc); if (NULL (XPROCESS (proc)->command_channel_p)) { /* It has ceased to be a command channel! */ int bytes_available; if (ioctl (channel, FIONREAD, &bytes_available) < 0) bytes_available = 0; if (bytes_available) FD_SET (channel, &Available); } continue; } #endif /* vipc */ /* Read data from the process, starting with our buffered-ahead character if we have one. */ nread = read_process_output (proc, channel); if (nread > 0) { /* Since read_process_output can run a filter, which can call accept-process-output, don't try to read from any other processes before doing the select again. */ FD_ZERO (&Available); if (do_display) redisplay_preserve_echo_area (); } #ifdef EWOULDBLOCK else if (nread == -1 && errno == EWOULDBLOCK) ; #else #ifdef O_NONBLOCK else if (nread == -1 && errno == EAGAIN) ; #else #ifdef O_NDELAY else if (nread == -1 && errno == EAGAIN) ; /* Note that we cannot distinguish between no input available now and a closed pipe. With luck, a closed pipe will be accompanied by subprocess termination and SIGCHLD. */ else if (nread == 0 && !NETCONN_P (proc)) ; #endif /* O_NDELAY */ #endif /* O_NONBLOCK */ #endif /* EWOULDBLOCK */ #ifdef HAVE_PTYS /* On some OSs with ptys, when the process on one end of a pty exits, the other end gets an error reading with errno = EIO instead of getting an EOF (0 bytes read). Therefore, if we get an error reading and errno = EIO, just continue, because the child process has exited and should clean itself up soon (e.g. when we get a SIGCHLD). */ else if (nread == -1 && errno == EIO && !NETCONN_P (proc)) ; #endif /* HAVE_PTYS */ /* If we can detect process termination, don't consider the process gone just because its pipe is closed. */ #ifdef SIGCHLD else if (nread == 0 && !NETCONN_P (proc)) ; #endif else { /* Preserve status of processes already terminated. */ XSETINT (XPROCESS (proc)->tick, ++process_tick); deactivate_process (proc); if (!NULL (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (EQ (XPROCESS (proc)->status, Qrun)) XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (256), Qnil)); } } } /* end for */ } /* end while */ #if 0 /* Resume periodic signals to poll for input, if necessary. */ start_polling (); #endif } /* Actually call the filter. This gets the information via variables because internal_condition_case won't pass arguments. */ Lisp_Object run_filter () { return call2 (this_filter, filter_process, filter_string); } /* Read pending output from the process channel, starting with our buffered-ahead character if we have one. Yield number of characters read. This function reads at most 1024 characters. If you want to read all available subprocess output, you must call it repeatedly until it returns zero. */ read_process_output (proc, channel) Lisp_Object proc; register int channel; { register int nchars; char chars[1024]; register Lisp_Object outstream; register struct buffer *old = current_buffer; register struct Lisp_Process *p = XPROCESS (proc); register int opoint; if (proc_buffered_char[channel] < 0) nchars = read (channel, chars, sizeof chars); else { chars[0] = proc_buffered_char[channel]; proc_buffered_char[channel] = -1; nchars = read (channel, chars + 1, sizeof chars - 1); if (nchars < 0) nchars = 1; else nchars = nchars + 1; } if (nchars <= 0) return nchars; outstream = p->filter; if (!NULL (outstream)) { int count = specpdl_ptr - specpdl; specbind (Qinhibit_quit, Qt); this_filter = outstream; filter_process = proc; filter_string = make_string (chars, nchars); call2 (this_filter, filter_process, filter_string); /* internal_condition_case (run_filter, Qerror, Fidentity); */ unbind_to (count); return nchars; } /* If no filter, write into buffer if it isn't dead. */ if (!NULL (p->buffer) && !NULL (XBUFFER (p->buffer)->name)) { Lisp_Object tem; Fset_buffer (p->buffer); opoint = point; /* Insert new output into buffer at the current end-of-output marker, thus preserving logical ordering of input and output. */ if (XMARKER (p->mark)->buffer) SET_PT (marker_position (p->mark)); else SET_PT (ZV); if (point <= opoint) opoint += nchars; tem = current_buffer->read_only; current_buffer->read_only = Qnil; insert (chars, nchars); current_buffer->read_only = tem; Fset_marker (p->mark, make_number (point), p->buffer); update_mode_lines++; SET_PT (opoint); set_buffer_internal (old); } return nchars; } DEFUN ("waiting-for-user-input-p", Fwaiting_for_user_input_p, Swaiting_for_user_input_p, 0, 0, 0, "Returns non-NIL if emacs is waiting for input from the user.\n\ This is intended for use by asynchronous process output filters and sentinels.") () { return ((waiting_for_user_input_p) ? Qt : Qnil); } /* Sending data to subprocess */ jmp_buf send_process_frame; send_process_trap () { #ifdef BSD4_1 sigrelse (SIGPIPE); sigrelse (SIGALRM); #endif /* BSD4_1 */ longjmp (send_process_frame, 1); } send_process (proc, buf, len) Lisp_Object proc; char *buf; int len; { /* Don't use register vars; longjmp can lose them. */ int rv; unsigned char *procname = XSTRING (XPROCESS (proc)->name)->data; if (!NULL (XPROCESS (proc)->raw_status_low)) update_status (XPROCESS (proc)); if (! EQ (XPROCESS (proc)->status, Qrun)) error ("Process %s not running", procname); if (!setjmp (send_process_frame)) while (len > 0) { signal (SIGPIPE, send_process_trap); rv = write (XFASTINT (XPROCESS (proc)->outfd), buf, len); signal (SIGPIPE, SIG_DFL); if (rv < 0) { if (0 #ifdef EWOULDBLOCK || errno == EWOULDBLOCK #endif #ifdef EAGAIN || errno == EAGAIN #endif ) { /* It would be nice to accept process output here, but that is difficult. For example, it could garbage what we are sending if that is from a buffer. */ immediate_quit = 1; QUIT; sleep (1); immediate_quit = 0; continue; } report_file_error ("writing to process", Fcons (proc, Qnil)); } buf += rv; len -= rv; } else { XPROCESS (proc)->raw_status_low = Qnil; XPROCESS (proc)->raw_status_high = Qnil; XPROCESS (proc)->status = Fcons (Qexit, Fcons (make_number (256), Qnil)); XSETINT (XPROCESS (proc)->tick, ++process_tick); deactivate_process (proc); error ("SIGPIPE raised on process %s; closed it", procname); } } DEFUN ("process-send-region", Fprocess_send_region, Sprocess_send_region, 3, 3, 0, "Send current contents of region as input to PROCESS.\n\ PROCESS may be a process name.\n\ Called from program, takes three arguments, PROCESS, START and END.") (process, start, end) Lisp_Object process, start, end; { Lisp_Object proc; int start1; proc = get_process (process); validate_region (&start, &end); if (XINT (start) < GPT && XINT (end) > GPT) move_gap (start); start1 = XINT (start); send_process (proc, &FETCH_CHAR (start1), XINT (end) - XINT (start)); return Qnil; } DEFUN ("process-send-string", Fprocess_send_string, Sprocess_send_string, 2, 2, 0, "Send PROCESS the contents of STRING as input.\n\ PROCESS may be a process name.") (process, string) Lisp_Object process, string; { Lisp_Object proc; CHECK_STRING (string, 1); proc = get_process (process); send_process (proc, XSTRING (string)->data, XSTRING (string)->size); return Qnil; } /* send a signal number SIGNO to PROCESS. CURRENT_GROUP means send to the process group that currently owns the terminal being used to communicate with PROCESS. This is used for various commands in shell mode. If NOMSG is zero, insert signal-announcements into process's buffers right away. */ process_send_signal (process, signo, current_group, nomsg) Lisp_Object process; int signo; Lisp_Object current_group; int nomsg; { Lisp_Object proc; register struct Lisp_Process *p; int gid; int no_pgrp = 0; proc = get_process (process); p = XPROCESS (proc); if (!EQ (p->childp, Qt)) error ("Process %s is not a subprocess", XSTRING (p->name)->data); if (!XFASTINT (p->infd)) error ("Process %s is not active", XSTRING (p->name)->data); if (NULL (p->pty_flag)) current_group = Qnil; #ifdef TIOCGPGRP /* Not sure about this! (fnf) */ /* If we are using pgrps, get a pgrp number and make it negative. */ if (!NULL (current_group)) { /* If possible, send signals to the entire pgrp by sending an input character to it. */ #if defined (TIOCGLTC) && defined (TIOCGETC) struct tchars c; struct ltchars lc; switch (signo) { case SIGINT: ioctl (XFASTINT (p->infd), TIOCGETC, &c); send_process (proc, &c.t_intrc, 1); return Qnil; case SIGQUIT: ioctl (XFASTINT (p->infd), TIOCGETC, &c); send_process (proc, &c.t_quitc, 1); return Qnil; case SIGTSTP: ioctl (XFASTINT (p->infd), TIOCGLTC, &lc); send_process (proc, &lc.t_suspc, 1); return Qnil; } #endif /* have TIOCGLTC and have TIOCGETC */ /* It is possible that the following code would work on other kinds of USG systems, not just on the IRIS. This should be tried in Emacs 19. */ #if defined (IRIS) && defined (HAVE_SETSID) /* Check for Irix, not older systems. */ struct termio t; switch (signo) { case SIGINT: ioctl (XFASTINT (p->infd), TCGETA, &t); send_process (proc, &t.c_cc[VINTR], 1); return Qnil; case SIGQUIT: ioctl (XFASTINT (p->infd), TCGETA, &t); send_process (proc, &t.c_cc[VQUIT], 1); return Qnil; case SIGTSTP: ioctl (XFASTINT (p->infd), TCGETA, &t); send_process (proc, &t.c_cc[VSWTCH], 1); return Qnil; } #endif /* IRIS and HAVE_SETSID */ /* Get the pgrp using the tty itself, if we have that. Otherwise, use the pty to get the pgrp. */ if (!NULL (p->subtty)) ioctl (XFASTINT (p->subtty), TIOCGPGRP, &gid); else ioctl (XFASTINT (p->infd), TIOCGPGRP, &gid); if (gid == -1) no_pgrp = 1; else gid = - gid; } else gid = - XFASTINT (p->pid); #else /* not using pgrps */ /* Can't select pgrps on this system, so we know that the child itself heads the pgrp. */ gid = - XFASTINT (p->pid); #endif /* not using pgrps */ switch (signo) { #ifdef SIGCONT case SIGCONT: p->raw_status_low = Qnil; p->raw_status_high = Qnil; p->status = Qrun; XSETINT (p->tick, ++process_tick); if (!nomsg) status_notify (); break; #endif case SIGINT: case SIGQUIT: case SIGKILL: flush_pending_output (XFASTINT (p->infd)); break; } /* If we don't have process groups, send the signal to the immediate subprocess. That isn't really right, but it's better than any obvious alternative. */ if (no_pgrp) { kill (XFASTINT (p->pid), signo); return; } /* gid may be a pid, or minus a pgrp's number */ #ifdef TIOCSIGSEND if (!NULL (current_group)) ioctl (XFASTINT (p->infd), TIOCSIGSEND, signo); else { gid = - XFASTINT (p->pid); kill (gid, signo); } #else /* no TIOCSIGSEND */ #ifdef BSD /* On bsd, [man says] kill does not accept a negative number to kill a pgrp. Must do that differently. */ killpg (-gid, signo); #else /* Not BSD. */ kill (gid, signo); #endif /* Not BSD. */ #endif /* no TIOCSIGSEND */ } DEFUN ("interrupt-process", Finterrupt_process, Sinterrupt_process, 0, 2, 0, "Interrupt process PROCESS. May be process or name of one.\n\ Nil or no arg means current buffer's process.\n\ Second arg CURRENT-GROUP non-nil means send signal to\n\ the current process-group of the process's controlling terminal\n\ rather than to the process's own process group.\n\ If the process is a shell, this means interrupt current subjob\n\ rather than the shell.") (process, current_group) Lisp_Object process, current_group; { process_send_signal (process, SIGINT, current_group, 0); return process; } DEFUN ("kill-process", Fkill_process, Skill_process, 0, 2, 0, "Kill process PROCESS. May be process or name of one.\n\ See function interrupt-process for more details on usage.") (process, current_group) Lisp_Object process, current_group; { process_send_signal (process, SIGKILL, current_group, 0); return process; } DEFUN ("quit-process", Fquit_process, Squit_process, 0, 2, 0, "Send QUIT signal to process PROCESS. May be process or name of one.\n\ See function interrupt-process for more details on usage.") (process, current_group) Lisp_Object process, current_group; { process_send_signal (process, SIGQUIT, current_group, 0); return process; } DEFUN ("stop-process", Fstop_process, Sstop_process, 0, 2, 0, "Stop process PROCESS. May be process or name of one.\n\ See function interrupt-process for more details on usage.") (process, current_group) Lisp_Object process, current_group; { #ifndef SIGTSTP error ("no SIGTSTP support"); #else process_send_signal (process, SIGTSTP, current_group, 0); #endif return process; } DEFUN ("continue-process", Fcontinue_process, Scontinue_process, 0, 2, 0, "Continue process PROCESS. May be process or name of one.\n\ See function interrupt-process for more details on usage.") (process, current_group) Lisp_Object process, current_group; { #ifdef SIGCONT process_send_signal (process, SIGCONT, current_group, 0); #else error ("no SIGCONT support"); #endif return process; } DEFUN ("process-send-eof", Fprocess_send_eof, Sprocess_send_eof, 0, 1, 0, "Make PROCESS see end-of-file in its input.\n\ Eof comes after any text already sent to it.\n\ nil or no arg means current buffer's process.") (process) Lisp_Object process; { Lisp_Object proc; proc = get_process (process); /* Sending a zero-length record is supposed to mean eof when TIOCREMOTE is turned on. */ #ifdef DID_REMOTE { char buf[1]; write (XFASTINT (XPROCESS (proc)->outfd), buf, 0); } #else /* did not do TOICREMOTE */ if (!NULL (XPROCESS (proc)->pty_flag)) send_process (proc, "\004", 1); else { close (XPROCESS (proc)->outfd); XFASTINT (XPROCESS (proc)->outfd) = open ("/dev/null", O_WRONLY); } #endif /* did not do TOICREMOTE */ return process; } /* Kill all processes associated with `buffer'. If `buffer' is nil, kill all processes */ kill_buffer_processes (buffer) Lisp_Object buffer; { Lisp_Object tail, proc; for (tail = Vprocess_alist; XGCTYPE (tail) == Lisp_Cons; tail = XCONS (tail)->cdr) { proc = XCONS (XCONS (tail)->car)->cdr; if (XGCTYPE (proc) == Lisp_Process && (NULL (buffer) || EQ (XPROCESS (proc)->buffer, buffer))) { if (NETCONN_P (proc)) deactivate_process (proc); else if (XFASTINT (XPROCESS (proc)->infd)) process_send_signal (proc, SIGHUP, Qnil, 1); } } } /* On receipt of a signal that a child status has changed, loop asking about children with changed statuses until the system says there are no more. All we do is change the status; we do not run sentinels or print notifications. That is saved for the next time keyboard input is done, in order to avoid timing errors. */ /** WARNING: this can be called during garbage collection. Therefore, it must not be fooled by the presence of mark bits in Lisp objects. */ /** USG WARNING: Although it is not obvious from the documentation in signal(2), on a USG system the SIGCLD handler MUST NOT call signal() before executing at least one wait(), otherwise the handler will be called again, resulting in an infinite loop. The relevant portion of the documentation reads "SIGCLD signals will be queued and the signal-catching function will be continually reentered until the queue is empty". Invoking signal() causes the kernel to reexamine the SIGCLD queue. Fred Fish, UniSoft Systems Inc. */ sigchld_handler (signo) int signo; { int old_errno = errno; Lisp_Object proc; register struct Lisp_Process *p; #ifdef BSD4_1 extern int synch_process_pid; extern int sigheld; sigheld |= sigbit (SIGCHLD); #endif while (1) { register int pid; WAITTYPE w; Lisp_Object tail; #ifdef WNOHANG #ifndef WUNTRACED #define WUNTRACED 0 #endif /* no WUNTRACED */ /* Keep trying to get a status until we get a definitive result. */ do { errno = 0; pid = wait3 (&w, WNOHANG | WUNTRACED, 0); } while (pid <= 0 && errno == EINTR); if (pid <= 0) { /* A real failure. We have done all our job, so return. */ /* USG systems forget handlers when they are used; must reestablish each time */ #ifdef USG signal (signo, sigchld_handler); /* WARNING - must come after wait3() */ #endif #ifdef BSD4_1 sigheld &= ~sigbit (SIGCHLD); sigrelse (SIGCHLD); #endif errno = old_errno; return; } #else pid = wait (&w); #endif /* no WNOHANG */ #ifdef BSD4_1 if (synch_process_pid == pid) synch_process_pid = 0; /* Zero it to show process has died. */ #endif /* Find the process that signaled us, and record its status. */ p = 0; for (tail = Vprocess_alist; XSYMBOL (tail) != XSYMBOL (Qnil); tail = XCONS (tail)->cdr) { proc = XCONS (XCONS (tail)->car)->cdr; p = XPROCESS (proc); if (EQ (p->childp, Qt) && XFASTINT (p->pid) == pid) break; p = 0; } /* If we don't recognize the pid number, look for a process being created. */ if (p == 0) for (tail = Vprocess_alist; XSYMBOL (tail) != XSYMBOL (Qnil); tail = XCONS (tail)->cdr) { proc = XCONS (XCONS (tail)->car)->cdr; p = XPROCESS (proc); if (XINT (p->pid) == -1) break; p = 0; } /* Change the status of the process that was found. */ if (p != 0) { union { int i; WAITTYPE wt; } u; XSETINT (p->tick, ++process_tick); u.wt = w; XFASTINT (p->raw_status_low) = u.i & 0xffff; XFASTINT (p->raw_status_high) = u.i >> 16; /* If process has terminated, stop waiting for its output. */ if (WIFSIGNALED (w) || WIFEXITED (w)) if (p->infd) FD_CLR (p->infd, &input_wait_mask); } else { /* Report the status of the synchronous process. */ if (WIFEXITED (w)) synch_process_retcode = WRETCODE (w); else if (WIFSIGNALED (w)) synch_process_death = sys_siglist[WTERMSIG (w)]; } /* On some systems, we must return right away. If any more processes want to signal us, we will get another signal. Otherwise (on systems that have WNOHANG), loop around to use up all the processes that have something to tell us. */ #if defined (USG) && ! (defined (HPUX) && defined (WNOHANG)) #ifdef USG signal (signo, sigchld_handler); #endif errno = old_errno; return; #endif /* USG, but not HPUX with WNOHANG */ } } /* Report all recent events of a change in process status (either run the sentinel or output a message). This is done while Emacs is waiting for keyboard input. */ status_notify () { register Lisp_Object proc, buffer; Lisp_Object tail = Qnil; Lisp_Object msg = Qnil; struct gcpro gcpro1, gcpro2; /* We need to gcpro tail; if read_process_output calls a filter which deletes a process and removes the cons to which tail points from Vprocess_alist, tail becomes an unprotected reference. */ GCPRO2 (tail, msg); for (tail = Vprocess_alist; !NULL (tail); tail = Fcdr (tail)) { Lisp_Object symbol; register struct Lisp_Process *p; proc = Fcdr (Fcar (tail)); p = XPROCESS (proc); if (XINT (p->tick) != XINT (p->update_tick)) { XSETINT (p->update_tick, XINT (p->tick)); /* If process is still active, read any output that remains. */ if (XFASTINT (p->infd)) while (read_process_output (proc, XFASTINT (p->infd)) > 0); buffer = p->buffer; /* Get the text to use for the message. */ if (!NULL (p->raw_status_low)) update_status (p); msg = status_message (p->status); /* If process is terminated, deactivate it or delete it. */ symbol = p->status; if (XTYPE (p->status) == Lisp_Cons) symbol = XCONS (p->status)->car; if (EQ (symbol, Qsignal) || EQ (symbol, Qexit) || EQ (symbol, Qclosed)) { if (delete_exited_processes) remove_process (proc); else deactivate_process (proc); } /* Now output the message suitably. */ if (!NULL (p->sentinel)) exec_sentinel (proc, msg); /* Don't bother with a message in the buffer when a process becomes runnable. */ else if (!EQ (symbol, Qrun) && !NULL (buffer)) { Lisp_Object ro = XBUFFER (buffer)->read_only; Lisp_Object tem; struct buffer *old = current_buffer; int opoint; /* Avoid error if buffer is deleted (probably that's why the process is dead, too) */ if (NULL (XBUFFER (buffer)->name)) continue; Fset_buffer (buffer); opoint = point; /* Insert new output into buffer at the current end-of-output marker, thus preserving logical ordering of input and output. */ if (XMARKER (p->mark)->buffer) SET_PT (marker_position (p->mark)); else SET_PT (ZV); if (point <= opoint) opoint += XSTRING (msg)->size + XSTRING (p->name)->size + 10; tem = current_buffer->read_only; current_buffer->read_only = Qnil; InsStr ("\nProcess "); Finsert (1, &p->name); InsStr (" "); Finsert (1, &msg); current_buffer->read_only = tem; Fset_marker (p->mark, make_number (point), p->buffer); SET_PT (opoint); set_buffer_internal (old); } } } /* end for */ update_mode_lines++; /* in case buffers use %s in mode-line-format */ redisplay_preserve_echo_area (); update_tick = process_tick; UNGCPRO; } exec_sentinel (proc, reason) Lisp_Object proc, reason; { Lisp_Object sentinel; register struct Lisp_Process *p = XPROCESS (proc); int count = specpdl_ptr - specpdl; sentinel = p->sentinel; if (NULL (sentinel)) return; p->sentinel = Qnil; specbind (Qinhibit_quit, Qt); this_filter = sentinel; filter_process = proc; filter_string = reason; call2 (this_filter, filter_process, filter_string); /* internal_condition_case (run_filter, Qerror, Fidentity); */ unbind_to (count); p->sentinel = sentinel; } init_process () { register int i; #ifdef SIGCHLD #ifndef CANNOT_DUMP if (! noninteractive || initialized) #endif signal (SIGCHLD, sigchld_handler); #endif FD_ZERO (&input_wait_mask); FD_SET (0, &input_wait_mask); Vprocess_alist = Qnil; for (i = 0; i < MAXDESC; i++) { chan_process[i] = Qnil; proc_buffered_char[i] = -1; } } syms_of_process () { Qprocessp = intern ("processp"); staticpro (&Qprocessp); Qrun = intern ("run"); staticpro (&Qrun); Qstop = intern ("stop"); staticpro (&Qstop); Qsignal = intern ("signal"); staticpro (&Qsignal); /* Qexit is already staticpro'd by syms_of_eval; don't staticpro it here again. Qexit = intern ("exit"); staticpro (&Qexit); */ Qopen = intern ("open"); staticpro (&Qopen); Qclosed = intern ("closed"); staticpro (&Qclosed); staticpro (&Vprocess_alist); DEFVAR_BOOL ("delete-exited-processes", &delete_exited_processes, "*Non-nil means delete processes immediately when they exit.\n\ nil means don't delete them until `list-processes' is run."); delete_exited_processes = 1; DEFVAR_LISP ("process-connection-type", &Vprocess_connection_type, "Control type of device used to communicate with subprocesses.\n\ Values are nil to use a pipe, t for a pty (or pipe if ptys not supported).\n\ Value takes effect when `start-process' is called."); Vprocess_connection_type = Qt; defsubr (&Sprocessp); defsubr (&Sget_process); defsubr (&Sget_buffer_process); defsubr (&Sdelete_process); defsubr (&Sprocess_status); defsubr (&Sprocess_exit_status); defsubr (&Sprocess_id); defsubr (&Sprocess_name); defsubr (&Sprocess_command); defsubr (&Sset_process_buffer); defsubr (&Sprocess_buffer); defsubr (&Sprocess_mark); defsubr (&Sset_process_filter); defsubr (&Sprocess_filter); defsubr (&Sset_process_sentinel); defsubr (&Sprocess_sentinel); defsubr (&Sprocess_kill_without_query); defsubr (&Slist_processes); defsubr (&Sprocess_list); defsubr (&Sstart_process); #ifdef HAVE_SOCKETS defsubr (&Sopen_network_stream); #endif /* HAVE_SOCKETS */ defsubr (&Saccept_process_output); defsubr (&Sprocess_send_region); defsubr (&Sprocess_send_string); defsubr (&Sinterrupt_process); defsubr (&Skill_process); defsubr (&Squit_process); defsubr (&Sstop_process); defsubr (&Scontinue_process); defsubr (&Sprocess_send_eof); defsubr (&Swaiting_for_user_input_p); } #endif /* subprocesses */