(abort "This script cannot be run in the Novice mode.")
)
(makedir "SYS:Storage"
(infos)
)
(makedir "SYS:Storage/DosDrivers"
(infos)
)
(makedir "SYS:NetworkPC" ;Begin Makedir
(prompt "\n\n\n\nHit PROCEED to create SYS:NetworkPC\n\n(For Addtional Information on this step hit HELP.)") ;
(help "\n Network PC relies on there being a Drawer called SYS:NetworkPC in order for it to install properly. This drawer must exist in order for the remainder of this script to function.")
(infos) ;
(confirm) ;
) ;End Makedir
(copyfiles
(Prompt "For Additional Information on these files hit HELP.")
(source "NetworkPC:NetPC Amiga/")
(dest "SYS:NetworkPC/")
(files)
(infos)
(all)
)
(copyfiles
(prompt "Copying Default Icon")
(source "Prefs/Env-Archive/Sys/def_pc.info")
(dest "SYS:Prefs/Env-Archive/Sys/")
(help "This is a default icon that is used by NetworkPC.")
)
(copyfiles
(source "Prefs/Env-Archive/Sys/def_pc.info")
(dest "ENV:Sys/")
)
(copyfiles
(source "c/XIcon")
(dest "c:")
)
(if (> (getversion (resident)) (* 39 65536))
(
(copyfiles
(prompt "Copying mount receipt")
(source "Storage/DOSDrivers")
(all)
(dest "Sys:Storage/DOSDrivers")
(confirm)
(help
"This will copy the device definition also containing configuration to a directory. "
"If you copy it to the SYS:Storage/DOSDrivers directory, it will not be mounted automatically "
"and you will have to use the \"mount PC\" command to run it.\nPlacing in the DEVS:DOSDrivers "
"dir will mount it automatically after every startup. However, it is a good idea to not allow "
"automatic loading of handler (by adding the \"ACTIVATE = 0\" toooltype) and setting the "
"\"Activate\" entry in the file to 0. It can be also done by configuration program."
)
)
)
(
(textfile
(prompt "Program is to insert some lines at the beginning of your DEVS:Mountlist. If you have already installed PC2Am, remove the old specification after installing.")
(dest "Devs:Mountlist")
(include "Devs/PCEntry")
(include "Devs:Mountlist")
(confirm)
(help "You have system V 2.0, that does not allow use of separate device definitions, so it is necessary to modify the DEVS:Mountlist file.")
)
)
)
(copylib
(prompt "Copying igs.library")
(source "libs/igs.library")
(dest "libs:")
(help "\"igs.library\" is my own GUI support library, that is used by NetworkPC commodity. It must be installed.")
)
(copylib
(prompt "Copying NetPcParallel.device")
(source "Devs/NetPcParallel.device")
(dest "devs:")
(help "\"NetPcParallel.device\" is used for parallel transfer with NetworkPC. You don't need it when you will use just transfer via serial port.")
)
(copylib
(prompt "Copying Installer")
(source "c/Installer")
(dest "c:")
(help "\"Installer\" is required for the Configuration program.")
(confirm)
)
(copyfiles
(prompt "Copying the handler.")
(source "L/netpc-handler")
(dest "l:")
(help "The filesystem. Must be installed.")
(confirm)
)
(copyfiles
(prompt "Copying configuration script.")
(source "ConfigNetworkPC")
(dest "C:")
(help "This is an Installer script for configuring Amiga side of NetworkPC.")
(confirm)
)
(copyfiles
(prompt "Copying utility commands.")
(source "C/")
(all)
(dest "C:")
(help
"GetPCSpecs and SetPCSpecs are required by configuration program. You should"
"copy them to 'C:'\n\n"
"NetPCSpeed is an utility to approximately test speed of your connection. "
"It will run test and tell you read and write speed. If you don't want to "
"know the speed, you don't need this one."
)
(confirm)
)
(run "Installer ConfigNetworkPC"
(prompt "Do you want to run configuration script ?\n(Installer must be in the path)")
(confirm)
(help
"If you confirm this requester, the configuration script will be run and "
"you will be able to setup NetworkPC by an easy way."
)
)
(exit
"Installation of Amiga part done. Now ensure that you have installed the PC part. This is described in the PC Installation part of NetPC.guide."
