home *** CD-ROM | disk | FTP | other *** search
-
-
- SetPolTopaz 2.0
- Compilation date: 10.07.95
- Author: Grzegorz Królik
- Category: FreeWare
-
- SetPolTopaz is an alternative to the program PolFonts (by Fr Jan Pikul).
-
- This program is very simple, so it does not require close description.
- It can be started either from the Workbench or the CLI. You should not
- enter any parameters because the program will ignore they.
-
- SetPolTopaz requires the diskfont.library placed in the "Libs" directory.
- If it will not find the library, you will be informed.
-
- You have to have one of the following fonts on the disk:
-
- topazpl - Polish letters in the AmigaPL standard by Wojciech Bruszewski.
- tpzpl - Polish letters in the xJP standard by Jan Pikul.
-
- To install the progarm on the disk you have to:
-
- 1) Copy "SetPolTopaz" to the "C" directory.
- 2) Copy the "topazpl" or the "tpzpl" driectory to the "Fonts" directory.
- 3) Copy the "topazpl.font" or the "tpzpl.font" file to the "Fonts" directory.
-
- The orginal packet contains the letters in the AmigaPL and xJP standards.
-
- You also have to decide which standard do you want to use, and copy only
- one font to the "Fonts" directory.
-
- ATTENTION: If you copy both of them the first one (AmigaPL) will be
- only installed.
-
- 4) Change the "S/Startup-Sequence" file.
- Kickstart 1.3 users who use the FF command should be careful, beacuse
- the command SetPolTopaz HAS TO BE PLACED BEFORE the FF one.
-
- Program is written in 100% assembler.
-
- If you have any other questions or suggestions the write at the
- following address:
-
- Grzegorz Królik
- ul. Wyszyïskiego 8/19
- 42-400 Zawiercie
- Poland
-
-