HAM Radio 1

home *** CD-ROM | disk | FTP | other *** search

/ HAM Radio 1 / HamRadio.cdr / tech / droege2 / keytree.doc < prev next >

Wrap

Text File | 1986-10-14 | 10.7 KB | 301 lines

Page B-1 KEYTREE.DOC This is an abbreviated version of the key documentation. It is intended for posting near your terminal as a guide to the DROEGE system. 5000 1ENTER 2FILE 3PLOT 4SETUP 5SYMLST 6SPEED 7LOCATE 8END 9BACK 0REDRAW *1* 1LINE 2PAD 3SYMBOL 4LABEL 5OTHER 22000 *1* 1LOCLIN 2LOCPT 3STYLE 4SETUP 5STITCH 21000 *1* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 21370 *1* FINDS A LINE *2* DELETES A FOUND LINE *3* IN FUTURE WILL ALLOW LINE MOVE, COPY, ETC.. *4* SEE SETUP IN COLUMN 1 *5* REJECT FOUND LINE AND CONTINUE SEARCH *2* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 21410 *1* FINDS A LINE POINT *2* DELETES A FOUND LINE POINT *3* IN FUTURE WILL ALLOW LINE POINT MOVE, COPY, ETC. *4* SEE SETUP IN COLUMN 1 *5* REJECT FOUND LINE PT AND CONTINUE SEARCH *3* 1SOLID 2DOT 3DASH 4CENTER 5 *5* 1SET= 2SET= 3SET= 4SET= 5STSET *5* 1SET= 2SET= 3SET= 4SET= 5VIASYM 51000 *1* DRAWS LINES AS SOLID *2* DRAWS LINES DOTTED *3* DRAWS LINES DASHED *4* DRAWS CENTER LINES *4* SEE SETUP IN COLUMN 1 *2* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 22370 *1* FINDS A PAD *2* DELETES A FOUND PAD *3* IN FUTURE WILL ALLOW PAD MOVE, COPY, ETC.. *4* SEE SETUP IN COLUMN 1 *5* REJECT FOUND PAD AND CONTINUE SEARCH *3* 1LOCSYM 2NAME 3CREATE 4SETUP 5ROT=N 22320 *1* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 54210 *1* FINDS A SYMBOL *2* SELECTS SYMBOL TO BE LOCATED *3* IN FUTURE WILL ALLOW SYMBOL MOVE, COPY ETC.. *4* SEE SETUP IN COLUMN 1 *5* ROTATES SYMBOL IN 90 DEGREE STEPS *2* ASKS FOR SYMBOL NAME 55000 *3* 1NEW 2*MAKE 3ORIGIN 4KILL 5OPEN 39000 *1* ASKS FOR NAME FOR NEW SYMBOL THEN 39790 ASKS FOR ORIGIN LOCATION *2* IN FUTURE WILL MAKE PART OF JOB A SYMBOL *3* LOCATES ORIGIN FOR SYMBOL DATA THEN GIVES MENU 39850 1LINE 2PAD 3SYMBOL 4LABEL 5OTHER *1* SAME AS LINE ABOVE EXCEPT NOW LINE DATA IS 21000 ENTERED INTO A SYMBOL INSTEAD OF THE JOB *2* SAME AS PAD ABOVE EXCEPT NOW PAD DATA IS 37380 ENTERED INTO A SYMBOL INSTEAD OF THE JOB *3* 1LOCSYM 2NAME 3OPRSYM 4SETUP 5ROT=N 37340 *1* EXCEPT FOR OPRSYM THIS MENU IS THE *2* SAME AS THE EARLIER SYMBOL MENU *4* EXCEPT SYMBOLS ARE ENTERED INTO Page B-2 *5* THE OPEN SYMBOL INSTEAD OF THE JOB *3* 1LIST 2LIBSYM 3REPLAC 4RENAME 54270 *1* LISTS SYMBOLS USED IN THE 54400 OPEN SYMBOL BY NEST LEVEL *2* MAKES THE SYMBOL AND ALL 54445 SYMBOLS IT USES INTO A LIBRARY *3* REPLACES ALL USES OF ONE 54650 SYMBOL BY ANOTHER *4* RENAMES A SYMBOL 54395 *4* SAME AS LABEL ABOVE EXCEPT NOW LABEL DATA 37430 IS ENTERED INTO A SYMBOL INSTEAD OF JOB *5* SAME AS OTHER ABOVE EXCEPT NOW ARC DATA IS 13000 ENTERED INTO A SYMBOL INSTEAD OF THE JOB *4* KILLS (DELETES) AN EXISTING SYMBOL IF POSSIBLE 39620 *5* OPENS AN EXISTING SYMBOL FOR MORE DATA 39390 *4* SEE SETUP IN COLUMN 1 *5* CYCLES ROTATION 0,1,2,3,0,... 54250 *4* 1EDLAB 2SETLAB 3MAKLAB 4SETUP 5VARSYM 52000 *1* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 52670 *1* FINDS A LABEL *2* DELETES A FOUND LABEL *3* FUTURE MODIFICATION *4* SEE SETUP IN COLUMN 1 *5* REJECTS A FOUND LABEL AND CONTINUES SEARCH *2* 1MIR= 2LROT= 3SROT= 4SCREN 5SCALE 52745 *1* MIRROR IN X,Y OR OFF *2* ROTATE LETTERS IN STRING IN 90 DEGREE STEPS *3* ROTATE WHOLE STRING IN 90 DEGREE STEPS *4* SEE SETUP IN COLUMN 1 *5* SCALES SIZE OF LETTERS *3* ASKS FOR STRING TO BE USED 52405 *4* SEE SETUP IN COLUMN 1 *5* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 52880 VARSYM ALLOWS SYMBOLS TO BE ENTERED WITH ALL THE FEATURES OF LABELS - LIKE SCALING, VARIABLE LINE WIDTH ETC.. SEE INSTRUCTIONS *5* 1CIRCLE 2ARC 3EDARC 4SETUP 5 13000 *1* ASKS FOR RADIUS THEN GOES TO ED-ARC MENU 13150 *2* ASKS FOR THREE POINT ENTRY THEN GOES TO ED-ARC MENU 13210 *3* 1FIND 2DELETE 3*MODFY 4SETUP 5REJECT 13185 *1* FINDS AN ARC(CIRCLE) NOTE THAT ARCS AND CIRCLES ARE FOUND AT THEIR CENTERS *2* DELETES A FOUND ARC *3* FUTURE MOVE, COPY, ETC.. *4* SEE SETUP IN COLUMN 1 *5* REJECTS A FOUND ARC AND CONTINUES SEARCH *4* SEE SETUP IN COLUMN 1 *2* 1PUTFIL 2GETFIL 3LIBFIL 4JOBFIL 5LSTSET 26000 *1* 1SAVJOB 2SAVLIB 3 4 5 26495 *1* ASKS FOR FILE NAME THEN SAVES JOB *2* ASKS FOR FILE NAME THEN SAVES ALL JOB SYMBOLS AS A LIBRARY Page B-3 *2* 1LODJOB 2LODLIB 3LSTSYM 4LSTLAB 5LSTKEY 26685 *1* ASKS FOR FILE NAME THEN LOADS JOB - JOB MUST BE LOADED 26405 BEFORE LIBRARIES *2* ASKS FOR FILE NAME THEN LOADS LIBRARY - FIRST SYMBOL IN 26585 MEMORY WINS *3* LISTS THE SYMBOLS IN MEMORY 26930 *4* LISTS THE LABELS IN MEMORY 26950 *5* LISTS THE KEYBOARD 26940 *3* LISTS THE LIBRARIES ON THE DEFAULT DISK ON THE SCREEN *4* LISTS THE JOBS ON THE DEFAULT DISK ON THE SCREEN *5* LISTS THE COLOR AND APERTURES ASSIGNED TO EACH LEVEL BY SETUP 26810 *3* 1*PLOT 2*PRINT 3PLTFIL 4 5 27000 *1* FUTURE-WILL DRIVE A PLOTTER *2* FUTURE-WILL PLOT JOB ON A DOT MATRIX PRINTER *3* ASKS FOR FILE NAME, LEVEL, SCALE FACTOR, AND OFFSETS THEN CREATES 11000 A DISK PLOT FILE *4* 1EDSET 2EDLEVL 3EDCOLR 4EDAPER 5SCREN 34000 SETUPS ARE CREATED BY USING THE UP DOWN KEYS TO MOVE THROUGH THE LIST SETUP AND LEVEL ARE USED TO SELECT A PARTICULAR ENTRY THEY DO NOT CHANGE THE ENTRIES. COLOR AND APER CHANGE THE ENTRY ON THE SELECTED SETUP AND LEVEL AS THEY ARE CYCLED. THE KEY 5 * INDICATES THE ITEM BEING CHANGED. *1* 1UP 2DOWN 3 4 5*SETUP *2* 1UP 2DOWN 3 4 5*LEVEL *3* 1UP 2DOWN 3 4 5*COLOR *4* 1UP 2DOWN 3 4 5*APER *5* 1DR@W 2SHOLAB 3STYLE 4REGION 5GRID 36000 *1* ALTERNATES BETWEEN DR@W AND DR@L TO INDICATE THAT LINES 36310 ARE DRAWN AT WIDTH OR AS LINES *2* ALTERNATES BETWEEN SHOLAB AND NOLAB SHOLAB DRAWS LABELS 36350 NOLAB SKIPS LABEL DRAWING TO SPEED REDRAW *3* 1SOLID 2DOT 3DASH 4CENTER 5PALET 51000 AS DESCRIBED ABOVE SELECTS LINE STYLE AND COLOR SET *4* 1SPACE 2 3AUTO 4 5ALL 24000 *1* ASKS FOR POSITION OF UPPER LEFT HAND SCREEN CORNER 25550 AND SCREEN WIDTH - SCREEN SPACE IS REASSIGNED BUT *BEWARE* SCREEN IS NOT REDRAWN SO OBJECTS PLACED AFTER A REGION ASSIGNMENT WILL NOT GO WHERE THEY APPEAR UNTIL A REDRAW *3* ASKS FOR A SCREEN WIDTH. SCREEN SPACE IS REASSIGNED 24400 WITH THE GIVEN WIDTH AND UPPER LEFT HAND CORNER AT THE LOCATION OF THE CURSOR-SEE *BEWARE* ABOVE *5* REASSIGNS THE SCREEN TO SHOW ALL SPACE-SEE *BEWARE* 24590 *5* ASKS FOR A GRID SPACING-ANY GRID IS ALLOWED-BUT *BEWARE* 36250 OBJECTS ARE ONLY FOUND IF THEY ARE ON THE CURRENT GRID. IF YOU USE A FUNNY GRID AND FORGET IT YOU MAY NEED TO SEARCH ON A ONE MIL GRID TO FIND AN OBJECT. *5* ASKS NAME OF SYMBOL TO BE LISTED-FOR WIZARDS ONLY 5560 *6* CHANGES SPEED OF CURSOR MOVEMENT *7* LOCATE SOMETHING *8* END SOMETHING (A LINE) *9* GO BACK TO THE PREVIOUS MENU *0* 1UP 2DWN 3SELECT 4SETUP 5CHANGE Page B-4 *1* MOVE UP THE LIST *2* MOVE DOWN THE LIST *3* SELECT NAMED AREA FOR REDRAW *4* SEE SETUP IN COLUMN 1 *5* CHANGE NAME AND REDRAW AREA Page B-5