Geek Gadgets 1/ADE-1.bin/ade-dist/dbmalloc-1.14-src.tgz/tar.out/contrib/dbmalloc/PROBLEMS

Text File | 1996-09-28 | 12.9 KB | 304 lines

This file documents the problems that have been found when the library
is ported to different machines.  Where possible, a generic solution
has been added to the library so that the problem does not re-occur.

NOTES specific to a particular implementation are included at the end
of this file.  Search for ^SYSTEM if you want to jump to them:

0. Configure script has a problem

    One note about problems with configure is that they are frequently
    caused by someone who has installed an ansi compiler like gcc and
    hasn't changed the system include files accordingly.

    Configure will attempt to guess at the correct settings even if it
    is not able to determine if they are correct.  Theses guessed at
    settings will be flaged by a '/* *GUESS* */' to the right of the
    definition and should be reviewed to make sure they are right.

    If this happens, you should determine if the problem is a problem
    with the script itself, or with the script being able to determine
    the correct settings for your compiler/os combination.

    If you find that it is a bug in the script, please report it to
    the author so that the fix can be incorporated into future releases.
    This is most likely the cause of a problem.  You should pay
    particular attention to the fact that Configure *guesses* that it
    found the correct settings by compiling a test module and verifying
    that there were no warning messages generated.  It is possible that
    you have a strict ANSI compiler that is warning about something in
    the test file cctest.c which really has nothing to do with the
    Configuration.

    If, however, the script appears to be processing the data correctly,
    but is still unable to determine the correct settings for your system
    you will have to configure the file by hand.  This involves the
    following steps:

    A) create .configure file that contains the following lines

        #define VOIDTYPE     <voidtype>
        #define CONST        <const>
        #define DATATYPE    <malloc_datatype>
        #define SIZETYPE    <malloc_sizetype>
        #define MEMDATA        <mem_datatype>
        #define MEMSIZE        <mem_sizetype>
        #define MEMCMPTYPE    <mem_comptype>
        #define STRSIZE        <str_sizetype>
        #define STRCMPTYPE    <str_comptype>

    where

        voidtype        is void if your compiler understands
                void data types, int otherwise
        const        is const if your compiler understands
                constant variables
        malloc_datatype    is the base type of the pointer returned by
                malloc (usually char or void)
        malloc_sizetype    is the type of the size argument used by
                malloc and its associates (usually size_t,
                int, or unsigned int)
        mem_datatype    is the base type of the pointer returned by
                the mem* functions (like memcpy()). This is
                usually char or void.
        mem_sizetype    is the type of the len argument used by
                the mem* functions (usually size_t,
                int, or unsigned int).
        mem_comptype    type to be used for comparisons of the differing
                characters in the memory comparison functions.
                This will usually be char or unsigned char. ANSI
                C says it will be unsigned char.
        str_sizetype    is the type of the len argument used by
                the str* functions (like strncpy()).  This is
                usually size_t, int, or unsigned int.
        str_comptype    type to be used for comparisons of the differing
                characters in the string comparison functions.
                This will usually be char or unsigned char. ANSI
                C says it will be unsigned char.

    B) create .configure.s file that contains the following lines:

        #define ABORT_SIGNAL    <abortsignum>
        #define WRTSIZE        <write_sizetype>

    where

        abortsignum        is the signal number used to abort a program.
                This is usually SIGABRT or SIGIOT.
        write_sizetype    is the type of the size (or length) parameter
                to the write system call.  This will usually
                be size_t, unsigned int, or int

    In addition

        if your compiler/libraries do not support the putenv()
        call, but instead support setenv(), add the following line:

            #define USE_SETENV 1

        If your system has an Intrinsic.h file in /usr/include/X11,
        add the following line:

            #define FOUND_X_INTRINSIC 1

        If wait.h is available for wait() system call parameter
        definitions, add the following line:

            #define NEED_WAIT 1

        If you are running X11R4 or before and you intend to use the
        library to link with X programs, add the following line:

            #define DONT_FORCE_HEAPSTUFF 1

    C) If you want to preclude the use of the system memset and memcpy
    modules (which if they can be used will usually result in a
    significant performance gain), create a .configure.O (capital letter o)
    file with something in it (i.e. date > .configure.O).

    D) run Configure to generate the appropriate .h files (and if you
    didn't create the .configure.O file in step C, the converted system
    memset and memcpy routines, if they are compatible and useful)

    NOTE: Configure attempts to grab the memset.o and memmove(or memcpy)
    routines from libc.a, if it can find them, and convert them for
    use by the library since these modules are usually modified by the
    vendor so that they take advantage of assembly language features
    to improve performance.

    If libc.a cannot be found, or if the system modules are not compatible
    with the malloclib versions (this frequently happens with memcpy since
    the malloclib version correctly handles moving data around in
    overlapped regions), then Configure will not include them and the
    library will include its own version (which has been optimized in a
    portable fashion).

    If the files datamc.O and datams.O do not get created, then this was
    the case.  You can improve the performance of the library significantly
    by coding compatible libraries in assembly language if your cpu
    has specialized data movement instructions.  See the datamc.c routine
    for a sample of such a mechanism used to optimize memcpy() operations
    on a 386.

    If you do this, and it passes all of the tests (including the 1,000,000
    allocation test for testmalloc), please send it in and I will include
    it in the next release.


1. Compilation problems with the library itself.

    This is a fairly common problem and is most often associated with
    the settings for the .configure #defines.  If you get any compilation
    errors for modules within this library, the first thing you should
    do is verify that you are using the correct settings for these
    typedefs.  Review the description on what they should be set to and
    review the original settings.

    Another common problem is attempting to compile the library and/or
    test with a strict ANSI-C compiler.  Since ANSI reserves symbols
    like malloc, memcpy, strcpy, etc you can expect to have a lot of
    problems.  This is especially so if the ANSI is very strict
    because the library does make use of UNIX functionality like fork,
    wait, open, write, etc.

    If you have access to an standard K&R compiler (or a more relaxed
    ANSI compiler, especially one that uses the system K&R style header
    files (i.e. gcc without -pedantic on a system with a non-ANSI cc)
    you should use it to compile the library.  Once the library is
    compiled, you should be able to use it with code compiled under
    other compilers (assuming, of course, that they are compatible).


2. Conflicts with system provided string.h/memory.h includes

    The library provides its own versions of these functions, but includes
    the system header files so that if it compiles with no errors, you
    will know that the two agree exactly.   The Configure script should
    have ensured that they agreed, but is it possible that it got them
    wrong.  Check the .configure file to determine if the #defines are
    set correctly (as described in step 0)

3. Duplicate symbols from libc.a (or its equivalent shared library)

    This is most often caused by one of the system library functions
    including an additional function/variable definition in one of the
    memory/string library modules. (i.e. some systems have a cfree()
    call that is in the calloc.o library module).

    There are several ways to get around this problem.  The best way
    would be to duplicate the functionality of the extra reference
    where ever it is appropriate in the malloc library (similarly to
    the addition of cfree in the calloc.c module).   If you do this,
    please send me the new function and a description of the system and/or
    compiler so that I can determine if it should go into the standard
    distribution.

    Another mechanism that has been reportedly used in some architectures
    is to ignore the duplicate symbol errors and just chmod the executable
    so that it is executable (i.e. chmod +x).  I don't know if this is
    all that safe, or if it will work on your system, but it has been
    reported to successfully work in this fashion.

    Another, less desirable way would be to disable the offending function
    in this library.  This option is less desirable because the disabled
    function would no longer provide any error checking (which is
    supposed to be the purpose of this library).

    With shared libraries, there are some formats (perhaps all) that
    have explicit references to functions in the shared library that
    are duplicated in the debug library.  On these systems, the
    only way around the problem is to not use the shared library
    when linking the test version of the software.

4. Compilation errors in string.c and/or memory.c

    There are several compilers that provide in-line expansion of
    routines like strcpy.  This can cause real problems when we
    try to compile our own version.  If you can disable the in-line
    expansion, that is the best way to go.  This should only be
    needed for the malloc library itself.  The source you are debugging
    should include the malloc.h file and therefore won't be calling
    strcpy, but instead will be calling DBstrcpy (because of a macro
    in malloc.h).

    Disabling the in-lining of functions is usually accomplished by
    setting a compiler flag, or sometimes by predefining some #def
    that is used by system include files.

    If you can't disable the in-line expansion, you will have to
    disable the debug versions of the offending functions in the
    malloc library by adding a #ifdef around the code.  Be sure to
    just disable the functions that are giving you problems (i.e. don't
    disable all of string.c and don't disable the DB functions, because
    any code that includes malloc.h will attempt to use them).

5. Conflicts/problems with prototypes.h

    Prototypes.h is a generated file that has zillions of function
    prototypes for the malloc library.  You should not need to remake
    this module.  If, however, you have made changes to the calling
    arguments for some of the functions due to conflicts with system
    headers, you may have to modify or rebuild this file.

    To rebuild the file using the makefile targets you must have the
    cproto prototype generator (available in comp.sources.misc, vols 17
    and 18).

6. Argument mis-matches and syntax errors when including malloc.h

    This is usually the result of including malloc.h before string.h
    and/or memory.h which causes lots of problems.  malloc.h attempts
    to avoid this problem by #defining a bunch of typical symbols used
    to preclude multiple inclusions of these files, but some systems do
    not have this multiple inclusion protection, or use a slightly
    different symbol for the protection.

    To get around this problem you could do one of the following:

        1. change the code so that it includes malloc.h last.
        2. add multiple inclusion protection to the system include
           files.
        3. remove the #defines from malloc.h (which decreases the
           ability for the debug library to identify the source of
           the problems).

    Another problem with including malloc.h will occur if you have local
    definitions of things like:

            char * strcpy();

    which will result in a preprocessor or compiler error because of the
    #defines in malloc.h.  The recommended solution to this problem is
    to remove the local definitions and include the system header files
    that have the definitions (string.h in this case).  If you can't or
    don't want to do this, you can add #ifndef _DEBUG_MALLOC_INC and
    #endif around the local definitions so that they are not included if
    the debugging version of malloc.h is included.

    Yet another similar problem is the use of standard symbols for variable
    and/or structure element names.  This happens most often with the
    variable index.

    To fix this, you can change the name of the variable, #undef index
    after including the malloc library, or remove the #define index
    line from malloc.h

**************************************************************************
SYSTEM SPECIFIC PROBLEMS


Sun Sparc w/ SunOS 4.x and GCC 2.1

    The header files provided by sun do not contain ansi standard
    definitions for many of the modules used by the library and cause
    problems when included by code compiled by GCC.  This includes
    things like <memory.h> which has a prototype for memcpy which
    is something like void * memcpy(); and doesn't agree with the
    builtin definition in gcc (void * memcpy(void *, const void*, int)).

    The solution to this problem would be to define the correct
    prototypes for memory.h in the system include file or in the
    gcc version of the include file.