home *** CD-ROM | disk | FTP | other *** search
- Feature
-
- Richard Spowart informs us that these popular drives can be used with the
- Atari ...
-
- Some of you will be familiar with the Iomega Zip 100 removable hard
- drives, that have been available for use on the PC or Macintosh. However,
- Atari computers can also make use of the Zip drive as well, with a little
- bit of know-how.
-
- For those of you who would rather buy the Zip complete with everything,
- you can obtain the drive, together with the necessary leads from Hisoft.
- There is, however, a slightly cheaper way of going about this, which does
- mean that you can take advantage of the good prices on basic Zip drives as
- found in PC magazines.
-
- The only model of Zip drive that will work with Atari computers is the
- SCSI external version. These can be found priced at ú149.00 including VAT
- from stores such as PC World, but do shop around to find the best deal.
- Don't make the mistake of buying the parallel version as this will not
- work with your computer, and could possibly damage it if connected
- wrongly.
-
- It is probably best that you already have an external SCSI hard disk
- connected to your computer such as the MiniS series as supplied by System
- Solutions. These come with twin Centronics type ports on the back where
- additional SCSI drives can be connected to, should you purchase another
- hard disk in the future.
-
- You will need to purchase a Centronics 50-way lead to 25-way DIN lead.
- These are available again at dealers such as PC World for around ú12.00,
- but again do shop around for the best deal, as prices can vary from
- distributor to distributor.
-
- You will also need to purchase a Zip "disk". These can hold up to around
- 98 MB of data, which is ideal for storage purposes. These retail for
- around £14.00 normally, but it is worth again shopping around for the best
- deal. Zip disks are available singly and in packs of three, six and
- twelve. A three-pack should cost around £39.95, with the six-pack costing
- £79.95 and the twelve-pack costing a whopping £129.95. They all come with
- a full guarantee as standard.
-
- Connecting your Zip drive to your computer is relatively straightforward
- if you already have an external hard drive, by simply plugging one end of
- the lead into the Centronics port on your existing hard drive, and the
- 25-way DIN into the SCSI port to the left of the back of the Zip. The
- power supply plugs in as normal through the power port and fitting the
- plug into a standard 4-gang mains adaptor.
-
- In order to use the Zip, you will need to have a piece of software called
- a "driver". If you already have the ICD Link utilities (these come with
- some Atari SCSI interfaces) then you should be fine, otherwise you will
- need to purchase a copy of HDDriver v6.0 from System Solutions. AHDI does
- work fine with the Zip, but it will need configuring with a program called
- AHDICONF.PRG to enable it to cope with the missing SCSI ID numbers. For
- those of you who find this too technical, a copy of HD Driver v6.0 is
- recommended.
-
- AHDI, ICD Link and HD Driver all have programs to format hard drives,
- including the Zip, but do take care before you use this that you are not
- going to overwrite anything important.
-
- If you wish to see the Zip drive in action, why not pop along to the next
- meeting of your local Atari user club ? Some members of the Wessex Atari
- Group have been using their Zip drives for some time and have been very
- impressed.
-
- --------------------------------------------------------------------------
- Manufacturer: Iomega Systems
- Available from: Everywhere
- Rating: 95%
- Pros: Compact, quiet unit, easy to use
- Cons: Disks can be expensive
-