home *** CD-ROM | disk | FTP | other *** search
-
- Welcome to IconTamer!
- ---------------------
- Moon Valley Software Inc.
- 107 East Paradise Lane
- Phoenix, AZ 85022
-
- (602) 375-9502 Voice
- (602) 375-0531 BBS
-
- Version 1.01 12-01-90
-
- 12-01-90
- An Image inversion problem with DOS 4.01
-
- On some computers when cutting an icon or other image from the desktop it may
- appear inverted and upside down. This only occurs with DOS 4.01 DOS,
- Versions 3.3 and a beta version of DOS 5.0 both work flawlessly. We have been
- unable to isolate the exact cause since it happens on only a small percentage
- of computers. If you re-cut the image a second time it will appear
- correctly.
-
-
- 12-01-90
-
- NEW Control Buttons.
- Since the custom buttons were a big hit we spiffed them up a bit. Enjoy!
-
- 12-01-90
- ---------------------------------> NOTE <-------------------------------------
- If you aquired IconTamer before this date there is a good chance that it has
- a crc problem in the exe file. The documentation in the icontamer.wri file was
- also destroyed. Please upload this version to any BBS where you may have seen
- it. Thank you very much for your help in getting this version properly
- distributed.
-
- 11-16-90
- Initial release of Version 1.0
-
- There isn't a more comprehensive or easier to use Icon Management program
- available on the market today!
-
- -> IMPORTANT PROGRAM FEATURE NOT INCLUDED IN THE DOCUMENTAION <-
-
- Although not mentioned in the documentation, the screen cutting
- Cut Button will allow you to cut large portions (the entire windows desktop)
- of the screen to the clipboard. In IconTamer's Icon View Window you will
- see a garbled picture as it tries to fit a large image in a small window.
-
- However the entire screen cut has been copied to the clipboard. You may
- want to use this feature to clip graphics from other programs for insertion
- in Pagemaker, Word for Windows, ect... You could also use this feature to
- paste a large graphic into your graphics program for further editing.
-
- I hope you enjoy this added feature of IconTamer!
-
- Please be sure to read the documentation carefully. It is important that you
- configure your Icon Editor correctly to gain the maximum productivity from
- IconTamer.
-
- The documentation is furnished in Windows Write format. Substantial bottom
- margins were provided so you can re-format it for virtually any target
- printer. It was composed using 10 pt Helv on a NEC Postscript Printer.
-
- For registration and technical support information refer to the last page of
- the documentation. Thank you for the tremendous support that you have given
- our Zip Manager and Monitor Saver programs. We hope that you enjoy using
- IconTamer!
-
- Eric Anderson
- Moon Valley Software
- November 16, 1990
-
-