home *** CD-ROM | disk | FTP | other *** search
-
- IBM ThinkPad December 20, 1996
- MPEG Features Diskette for Windows 95 Version 1.12
- ==================================================
-
- What This Diskette Does
- -----------------------
-
- The accompanying MPEG Features Diskette can enable or update MPEG
- function in the ThinkPad system.
-
- Only the ThinkPad 760ED is supported.
-
- To determine whether you have to update the program,
- refer to "Summary of Changed and Fixed Items."
-
- To update the program, refer to "Installation Guide."
-
-
- Released Version
- ----------------
-
- Version 1.00 New model support
- Version 1.10 A fix for some problems
- Version 1.11 A fix for some problems
- Version 1.12 A fix for some problems
-
-
- Summary of Change
- -----------------
- Key: <n.nn> Diskette version (for example, 1.00 means Version 1.00)
- (New) New function or enhancement
- (Fix) Correction to existing function
-
- <1.00>
- - (New) Support for ThinkPad 760ED.
-
- <1.10>
- - (Fix) The power saving function is updated.
- - (Fix) The out-of-lip-sync problem for the PAL clip with irregular
- resolution size is fixed.
- - (Fix) MPEG video no longer halts during chapter seek.
- - (Fix) The flashing noise is eliminated in specific MPEG file play.
- - (Fix) The Thermal problem is fixed.
-
- <1.11>
- - (Fix) System hang in MPEG play when docked into PCI Docking station
-
- <1.12>
- - (Fix) MPEG video of a small file size cannot be played repeatedly.
-
-
- Installation Guide
- ------------------
-
- Note:
- - Use this driver diskette only for the ThinkPad 760ED.
- - Before installing, make sure that you have installed
- the following software in the computer:
- - Video Features Diskette for Windows 95 (Version 1.10 or above)
- - Mwave DSP Features Diskette for Windows 95
- - Video Capture Driver II for Windows 95 (Version 1.11 or above)
-
- 1. Start Windows 95.
-
- 2. Open My Computer.
-
- 3. Go to Control Panel, and then go to Add New Hardware.
-
- 4. Click on Next. When asked "Search for your new hardware?,"
- select No.
-
- 5. Click on Next and select Sound, video and game controller.
-
- 6. Click on Next.
-
- 7. Insert the MPEG Features Diskette for Windows 95 into the
- diskette drive. Click on Have Disk....
-
- 8. Select IBM MPEG CD-i/VideoCD (mci) and click on OK.
-
- 9. Click on OK, and click on Finish.
-
- 10. When Windows 95 prompts you to restart the computer, click on No.
- Repeat step 3 to 10 to install IBM MPEG Files/ISO9660 (mci).
- On step 8, however, select IBM MPEG Files/ISO9660 (mci).
-
- 11. When Windows 95 prompts you to restart the computer, click on No.
- Repeat step 3 to 10 to install IBM MPEG PCI Bridge.
- On step 8, however, select IBM MPEG PCI Bridge.
-
- 12. If this is the first time to install IBM MPEG PCI Bridge,
- you must do the following one-time operation.
- Select the following in sequence.
-
- Control Panel -> System -> Device Manager -> Other Devices
- ->PCI Multimedia Device.
-
- Select Remove and OK (This procedure removes
- the device from the unknown class and adds it to sound,
- video, and game controllers).
-
- 13. Shut down the system and reboot.
-
-
- Trademarks
- ----------
- IBM and ThinkPad are trademarks of IBM Corporation.
- Windows is a trademark of Microsoft Corporation.
-