17 Bit Software 1: Collection A

home *** CD-ROM | disk | FTP | other *** search

/ 17 Bit Software 1: Collection A / 17Bit_Collection_A.iso / files / 250.dms / in.adf / Access!me < prev next >

Wrap

Text File | 1988-07-26 | 49.5 KB | 1,139 lines

__________________________________________________________________________ | | | Access! (C) 1987/88 by Keith Young | |__________________________________________________________________________| | | | Author: Keith Young | | Version: 1.3a (bug fix for version 1.30) | | Date: 04/09/88 | | Status: ShareWare (registration: $25.00) | | Size: 104652 (only 124 bytes bigger than 1.29! <grin> ) | |__________________________________________________________________________| Copyright and Distribution notice: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Access! is being distributed as SHAREWARE and may be posted at will, provided the following files (listed below) remain UNCHANGED and AS A WHOLE in ARCHIVE FORM along with this notice. (files may be "un-arced" in a directory together on pd disks) ALL rights to the program and graphic images within it remain with the author: Keith Young Please NOTE that this program IS being distributed as "ShareWare", which means that it is "User Supported Software". Your support is appreciated. I have spent ( and do spend ) many hours (and more than a few bucks) every week designing, programming and debugging "Access!" and will continue to do so as long as there is enough interest and support to warrant doing so. Although it is not yet completed (read: "back from the printers") I hope to soon have a detailed, hard copy manual (with table of contents, index, etc...) to offer to registered users. "Film at Eleven" <grin> --------------------------------------------------------------------------- Credits: ( Although most of the programming and implementation of code ~~~~~~~~ in this program is a sole effort on my part, I believe in giving credit where credit is due...) DJ.James -> for the origianal source to "Comm1.34" (thanx Dan, I couldn't have made this mess without it! (grin)) C.Heath -> for the origianal source to the "File Requester" and "Color Palette". D.Greenwald-> For his Fast Font routines... J.Nangano -> For sample source to and help with CIS-QB protocol and review buffer routines. M.Fahrion -> For the NICE Icon! And everyone else who's answered my programming questions, made suggestions or reported problems. (and of course) Commodore-Amiga-> For the BEST damn personal computer money can buy! AND ANYONE ELSE I FORGOT TO MENTION, THANX! AND EVERYONE WHO'S SENT IN THEIR SHAREWARE REGISTRATIONS, THANX! THANX! --------------------------------------------------------------------------- Files in this archive ~~~~~~~~~~~~~~~~~~~~~ Name Size Function ~~~~ ~~~~ ~~~~~~~~ Access! 104652 This is the Terminal program: "Access!" Access!.info 7422 Icon for... Acc!.phone 1530 Sample phone-lib file for... Acc!.color 321 Sample color file for... Acc!.def 762 Sample define file for... Acc!.keys 2560 Sample macro-key file for... Access!me 50277 A doc file of questionable content and quality. ( the file you are reading now ) Disclaimer!: ~~~~~~~~~~~~ Please note that this program is still under developement and therefore.... This program comes with NO WARRANTY either expressed or implied and I assume NO responsibility for any damage whatsoever, caused by the use of it. Nuff Said, Now on to bussiness.... --------------------------------------------------------------------------- Access! ~~~~~~~ A General Purpose, ANSI Telecommunications Program. Feature Over-View: ( '*' = new or modified this release ) ~~~~~~~~~~~~~~~~~~ * o Xmodem-CRC and Xmodem-Checksum protocols. o Fast WXmodem transfer protocol. * o Compuserve "Quick B" (or "B+") protocol. (a new, faster implementation of CIS-B protocol) o Auto-Chop mode to strip xmodem padding from in-comming files (auto- disabled for ".arc/.zoo/.pak" extended files) o ASCII send and receive mode with user-selectable char. send delay and next-line delay. o "Review Buffer" allows reviewing/saving a user-definable number of lines that have already scrolled off the screen. o "Capture Buffer" for saving in-comming text to file. o "Print" feature for printing in-comming text. o "Strip" feature for stripping in-comming blank lines. o "Read" feature for reading text files. o "Chat Mode" with buffered input and line editing for tele-conferencing and term-to-term use. o "Split Screen" mode (half screen) for easy access to Amiga's multi- tasking capabilities. * o Flexable, informative "File Requester" for all file IO. * o User-selectable 4, 8 or 16 color screen/windows. o ANSI terminal emulation with full 8 color text support. o "Color Palette" for user-selectable color maps with load and save capabilities. o "Macro Window" for the editing/loading/saving of 20 macro-keys. * o Pseudo-Scipting ability through macro-keys. * o "Phone Book" window for editing/adding/loading/saving phone books with up to 60 numbers. (alternate service numbers available) o "Auto-Dialer" to dial a number (future numberS) until connection is made. o Serial parameters, color file and keymacro file loaded at dial-time for each number. * o "Define Window" for editing/loading/saving default fileing and modem preferences and other term defaults. o Run-time "Interlace" ON/OFF toggle. o On-screen "Fast-Menus" for easy "access" (pun intended) to most features. o Two built-in Clocks for your time-keeping needs. o And a Partri--dge in a pear treeeee... o And anything else I can work in... stay tuned..... --------------------------------------------------------------------------- Minimum System Requirements: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Amiga: 500/1000/2000/3000 (3000?) with a MINIMUM of 512K. Modem: 300/1200/2400/9600 (well, only if you want to call somewhere :-) Suggested Configuration: ~~~~~~~~~~~~~~~~~~~~~~~~ Amiga (any of the above will do) with 1MEG. or more. VD0: (or similar recoverable ram disk) for fast downloading/uploading. Hard Disk, 20meg or more is nice... Make a directory on your disk and put the term support files (.key/.phone/ .color/Access!) in it and cd to that directory before booting the term. (this will be your "System Directory", see "Usage" below) --------------------------------------------------------------------------- Usage ~~~~~ from the cli promt: 1> access! [drive:path/myfile.def] where: "access!" is the name of the term. and optional: "myfile.def" is the name of a configuration file. (if no configuration file is given, it will look for "Acc!.def" in your "S:" directory. If THAT is not found, it will use built-in defaults) from the Worbench: Just click on the Icon! To set the ".def" file from WorkBench, type: DEFILE=myfile.def (or a full path/filename of a valid configuration file) into the 'ToolTypes' string in the Icon (using the 'Info' command of WorkBench) Once the term is loaded, open the "Define" window and tell it where your "System Directory" is and any other files you would like loaded at boot- time, Fill in the "Modem Strings" with the proper settings for YOUR modem, and then "Save" the information for future use. (you can choose which .def file to load at run-time on the command-line or in the Icon, see above) --------------------------------------------------------------------------- Historically Speaking ~~~~~~~~~~~~~~~~~~~~~ NOTE: This is version 1.3a of Access!, it seems that version 1.30 had a bug in the Xmodem download module (brought to the surface by 3.6 of the Manx compiler), my thanks to Ben Blish for helping me track it down. Aside from fixing this bug, this version is virtually -- unchanged -- from version 1.30 (if you downloaded 1.30, my appologies for any problems it caused you). Listed below are the relevant changes in this release ( 1.30 ) over the previous one ( 1.29 ). General: ~~~~~~~~ o Several changes have been made to the graphical interface... though it may no longer be as 'colorful' as it was, most of the windows now have the same 'look and feel'. Doing so has let me combine several 'display' functions to cut down on code size (and speed things up a bit). o The replacing of several gadget images (with one image) and a new '4 color mode' option have reduced the overall CHIP MEM requirements. o You should see an increase in speed (up to 25%) for protocol downloads due to some optimizing of the serial routines. Compuserve B+ protocol: ~~~~~~~~~~~~~~~~~~~~~~~ o Since Access! relies on certain "control chars" being sent to initiate a "Compuserve Quick B" protocol transfer and since these chars can appear inadvertantly as "line noise" while on other systems and since trying to download a file using "B" protocal on a system other than Compuserve has only "ill" effects... o I have implemented a "toggle" to enable/disable "B" protocol. The default mode is: "disabled", in order to use/enable it you MUST do one of two things... 1) (the prefered way) in your phone-book entry for Compuserve, put a '+' char anywhere within the "name" field. i.e. "Compuserve +" 2) you may toggle it on or off by holding down the <Left-Amiga> key and hitting the <b> key. (a message will be printed to the screen) Phone-Book: ~~~~~~~~~~~ o When you select a phone nuber entry, it now stays highlighted. If you click on a highlighted entry, the number will be immediately dialed. (this acts the *same* as clicking on a number, then clicking "OKAY!" This makes it possible to "double-click" a number to dial it (although the delay between clicks is not checked ). o If you wish to use "Compuserve B" protocol, put a '+' char anywhere in the "name" field of your Compuserve phone-book entry. File-Requester: ~~~~~~~~~~~~~~~ o Clicking on (holding down) the arrow gadgets no longer 'loops' through the file list (when it gets to the top/bottom, it stops). o If you are running low on mem and the regular File-Requester window can not open, then a small "Input Window" will open (with just one string gadget) to accept the drive:path/filename you provide. Define Window: ~~~~~~~~~~~~~~ o All variables are now saved when the window is opened so that clicking on "CANCEL!" will now 'undo' any changes you might have made. o Clicking on "No.Colors:" will now let you choose 4, 8 or 16 color modes. Selecting 4 color mode will save you an additional 22K of CHIP MEM with just the main term windows open over the 8 color mode. Note however, that this mode was added at the last minute and certain text strings will not show up in 4 color mode (anything that was normally orange on black, will become black on black B^) Noted are: the clock on the fast menu, "READ" on the fast menu, "DIAL" on the fast menu, and certain "menu" options. (there may be others) ( sorry, I don't have time to fix this now... I'll fix it for the next release) Macro Window: ~~~~~~~~~~~~~ o aside from the various 'display' changes, there is now a limited 'script' type language accessable through the macro keys that will let you create simple auto-login proceedures... (See: "Macro Window" below for details) --------------------------------------------------------------------------- Individual Features Listed Below ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --------------------------------------------------------------------------- Review Buffer Operation: ~~~~~~~~~~~~~~~~~~~~~~~~ o To open the review buffer, just press the <SHIFT> <HELP> keys. o To scroll-backwards, use the UP-Arrow key OR click anywhere on the top half of the screen. o To scroll-forwards, (you guessed it) use the DOWN-Arrow key OR click anywhere on the bottom half of the screen. o To scroll-backwards 8 lines at a time, use the LEFT-Arrow key. o To scroll-forwards 8 lines at a time, use the RIGHT-Arrow key. o To close the review buffer window, use the <ESC> key, hit the 'close' gadget or press the <HELP> key again. o To SAVE the review buffer to a named file, use L-Amiga 'w' (YES, I SAID LEFT-AMIGA) from the main term window. (this may change when I decide where to add a gadget/menu-item) o You can select the number of lines saved (size of buffer) by an item in the DEFINE window labeled: "RBufLines:" (or something like that). Each line takes up 24 bytes + 1 byte per char in that line, so assuming a 76 char line: 24 + 76 = 100 * number_of_lines = total_memory_cumsumed (of course a line CAN be anywhere from 25 bytes to 104 bytes.) If you change the number to LESS than you already had set, it will 'chop' lines off of the top until it gets down to your specified size (this is checked EVERY time a char is buffered) and frees up the memory that was being used. Making the buffer BIGGER than it is currently set, does just that and does not effect any currently buffered text. --------------------------------------------------------------------------- Chat Mode: ~~~~~~~~~~ o the lower window ( where you do all your typing) is now a FULL FLEDGED EDITOR ( well, a simple one anyway <grin> ). o also a "history" of the last 16 lines typed is available by using the up/down cursor keys. o you can cursor left/right, insert/delete and backspace to edit your text (up to 127 (128?) chars) before sending it. ( this makes the "history" mentioned above almost seem useful ). o <CTRL> <X> in chat mode will "kill" the current line. o <CTRL> <V> will "un-kill" the last line "killed" (it's kept in a buffer) ( ctrl chars. other than these, are send directly to the modem and are not buffered ) o <SHIFT> <U/D-CURSOR> will now clear current line but not 'clip' it to the kill buffer. o <ALT> <L/R-CURSOR> == back/forward one word. o <SHIFT> <L/R-CURSOR> == beginning/end of line. o Function keys are "sent right out" and the line you are working on will be "refreshed". o The "/Sen xx" gadget is for use in conference mode to "Send" private messages to job # xx (can currently be used on GEnie and CIS). Basically, if it is enabled (click on "/Sen"), it will prefix your message with "/Sen" and the job # that you provide in the string gadget so that you can carry on a short private conversation without having to type it yourself every time (click again to de-select it). --------------------------------------------------------------------------- Notes On CIS Quick-B Protocol: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ o Access! supports "CIS Quick B" protocol. This is an improvement on the earlier protocol in that it uses 1024 byte blocks (vs. 512) and has a "send ahead" feature (it will send a second block without first waiting for an ACK for the first one, overcoming some of the time delay involved when using "packet switched" networks). This protocol does not show up anywhere within the menus in the term because everything happens auto- maticaly. NOTE: since Access! relies on certain "control chars" being sent to initiate a "Compuserve Quick B" protocol transfer and since these chars can appear inadvertantly as "line noise" while on other systems and since trying to download a file using "B" protocal on a system other than Compuserve has only "ill" effects... I have implemented a "toggle" to enable/disable "B" protocol. The default mode is: "disabled", in order to use/enable it you MUST do one of two things... 1) (the prefered way) in your phone-book entry for Compuserve, put a '+' char anywhere within the "name" field. i.e. "Compuserve +" 2) you may toggle it on or off by holding down the <Left-Amiga> key and hitting the <b> key. (a message will be printed to the screen) Once you have "enabled" the protocol, here is how to use it... 1) Select "Compuserve B" when prompted for a protocol by CIS. (CIS will know whether to use "Quick B" or regular "B" ) 2) When prompted for a file name for YOUR computer, type in the FULL path name and file name for the file ( drive:dir/filename ). 3) Sit back and wait for the transfer to finish. --------------------------------------------------------------------------- Notes On The File Reader: ~~~~~~~~~~~~~~~~~~~~~~~~~ o Selecting the "READ" gadget ( on the fast-menu bar ) will open a window to let you read ascii text files. This feature is NOT YET in its FINAL FORM but I thought I'd leave it in for whatever use you might get from it. Therefore, I will just breifly describe it here... This feature is basically a 'text-file-reader', when you select it you will be asked for a file to read. After you make your selection, a window will open and you will see a 'line-counter' ticking away in the titlebar. After the file has been proccessed (which may take a few seconds), a page worth of the file is displayed. Clicking anywhere in the lower 1/2 of the window will scroll the file forward, clicking in the top 1/2 will scroll backward one line (and continue until you release the button). There are two arrow-gadgets in the titlebar for moving forward/backward one page at a time, along with gadgets for moving to the top/bottom of the file. This is a 'file-based' reader and therefore the forward/reverse scrolling (one line at a time) is VERY slow on disk-based files (but is fairly quick on ram-based files). --------------------------------------------------------------------------- "Color" menu item: ~~~~~~~~~~~~~~~~~~ o "Reset Text Colors"-> Selecting this will reset both the foreground and background colors (colors 1,0 respectively). This is usefull if you make a selection on a "Color" BBS in the middle of a color change and you get a "bad" color combination. (this ever happen to you?) o "ForeGround Text Color" -> Here you can select the color for text in the "receive" window. This color will stay the same until... 1:You select another color. 2:A BBS (or other terminal) sends an ANSI code that changes it. (NOTE: in CHAT mode, the TOP (receive) window will use this color,but the BOTTOM (transfer) window will be color #1.) o "BackGround Text Color" -> Same as above but for the text background color. (NOTE: see note above) o "Sample Text Colors" -> This option lets you test your foreground/background color selections to see what works best... EXAMPLE: Select a foreground color, go to "Sample Text Colors", select "Background Colors" and your selected foreground color will be displayed on 8 different background colors. Now try the opposite for background. (confused yet?) o "Modify Palette" -> Yep, you guessed it, this will bring up a color palette for you to set the colors YOU like. (the colors I like are already there). 1a) "OKAY"-> Selecting this gadget tells the system that the current/modified (or not modified) colors are the ones you would like to use. 1b) "RESET"-> This gadget brings back the original "system" colors (the ones I like :-). If you get things all messed up, you can always get back to where you started. 1c) "CANCEL"-> This gadget tells the system that you changed your mind and it will return you to the last colors that were "OKAYed". EXAMPLE: If you have modified the colors (and hit OKAY) and then want the "default/system colors", 1. Open the Palette. 2. select "RESET" 3. select "OKAY" (if you select "CANCEL" instead, it will return to the last colors) IMPORTANT! ~~~~~~~~~~ ONLY AFTER selecting your colors and CLOSING the palette, open up the file-requester and/or menus and check out the colors. Many of the colors are dependent on each other for the gadgets and menus to look "esthetically" pleasing.(in my humble opinion anyway :-) But if you find a combination that works well, SAVE THEM for later use. 1d) "LOAD"-> This will load the colors in the given file name. (provided they were "saved" by "Access!") 1e) "SAVE"-> The "save" option will save the currently selected color values to a text file with the given name. --------------------------------------------------------------------------- Macro Window: ~~~~~~~~~~~~~ Selecting this option (from the "Fast-Menu" or the regular menu) will open up a "Macro Window" that will let you see/edit/load/save all currently defined macro keys (F1-F10,<shift>F1-F10). usage: When the window opens, you will see 10 funtion key definitions. Hit the "arrow" gadget to toggle between shifted/non-shifted keys. To edit one, simply point to it and "click". It will then move down to the editing line where you can make your changes. When your through, be sure to hit <return> before moving on or your changes will be lost! The new definitions will be in effect until you either quit the program, change them again, load in new ones, or (heaven forbid) crash. Select "Save" to save them to disk for future use. a) "OKAY" -> when your done editing/loading/saving ect.. this will close the window. b) "SAVE" -> brings up the "File Requester" window and saves macros to the name you supply. c) "LOAD" -> opposite of "SAVE" (above) d) "CANCEL"-> currently acts the same as "OKAY" above (selceting this gadget COULD be used for "undoing" any current changes, but this would take a little more "overhead" and I left that option out for now...) e) " ^ " -> (arrow) click on this to toggle between "shifted" and "non-shifted" funtion key definitions. There is a limited 'pseudo-script' type language accessable through the macro-keys that will let you create simple auto-login proceedures and a few other things... The following commands are available, ALL of which use the '\' char. to tell Access! to treat the next x number of chars (depending on the command) as either cntrl chars. or a command sequence... NOTE: parameters surrounded by <> are _required_ , parameters surrounded by [] are _optional_ . \r RETURN \n RETURN \t TAB \f Form-Feed \b Back-Space \B Beep() \D<x> auto-D[ial] where 'x' is a number from 1-60 that corresponds to the phone-book entries. \d<x> same as above, but without setting the auto-dial feature. \h hang up \l line break \L<p,c,k>["string"] L[oad] the currently defined support file (phone, color, key) from the current "System Dir:". Or optionally load the specified support file (p,c or k) with the name of "string" (use quotes) Examples: \Lp loads the currently defined .phone file using the currently defined "System Dir:" \Lc"df0:terms/my.colors" loads the .color file-> df0:terms/my.colors \m<x> call another macro, where 'x' is the number of the macro from 1-20 Examples: \m6 calls macro 'F6' \m20 calls macro 'S10' (shifted F10) \P<"string"> pause until "string" has been recieved (string search is not case sensitive) the '?' char. will match any char. in a string. Examples: \P"password:" pauses until the string "password:" has been recieved. \P"pASSword:" acts _excactly_ as the above example (string is not case sensitive) \P"p?ss?or?:" also acts _excactly_ as the first example ( the '?' char. is used as a 'wild card' and will match any single char.) \p<c> pause until char. 'c' has been recieved ( 'c' is not case...) Examples: \p: pauses until char. ':' is recieved \p? pauses until char. '?' is recieved ( no 'wild carding' for this command) \V<d,p,w><x> used to set 'delay' V[alues] (ranging from 0-255) for... Eamples: \Vd50 sets dial_delay value (time between dial attempts for auto- dialing) to 50 'ticks' ( 1 second ). \Vp20 sets pause_delay value (the time Access! will "pause for string" or "pause for char." ) to 20 _seconds_. \Vw100 sets wait_delay value (the time to pause when using the \w command listed below) to 100 'ticks' ( 2 seconds ) \Vt100 activates... nah... (sorry, just a bad joke :-) \w wait for x amount of time in 'ticks' (time set by \V command above) \$<u,d,s>"dir" change specified directory ( upload, download, system ) to "dir". Examples: \$u"vd0:" changes the "Upload Dir:" to "vd0:" \$s"df1:supportfiles" changes the "System Dir:" to "df1:supportfiles" \\ just sends a '\' char. Further Examples: \D4\w\r\P"service"CIS\r\P"user id"\m19\P"password"\m20\B this macro string would: o D[ial] phone-book entry number 4 using the auto-dial feature o w[ait] for a predefined amount of time o send out a <RETURN> char. o P[ause] until the string "service" was recieved o send "CIS" to the modem (anything that is not part of a command is simply sent to the modem as usual) o send a <RETURN> char. o P[ause] until the string "user id" was recieved o send-out/execute macro number 19 (this would be "S9" and would in this example contain your user-id and a <RETURN> char.) o P[ause] until the string "password" was recieved o send-out/execute macro number 20 (this would be "S10" and would in this example contain your password and a <RETURN> char.) o B[eep] to let you know it was done. :-) --------------------------------------------------------------------------- Phone Book: ~~~~~~~~~~~ Although not yet in "finished" form, There is a "Phone Book" window. Usage is fairly straight-foward but I'll expand a little anyway... When the "Phone Book" opens, you'll see 30 phone numbers list along with some other gadgets/info... 1) "ADD" -> Will allow you to add numbers (up to 60 total) to the "Phone Book".(see "NOTE" below for further info) 2) "DELETE"-> Opposite of "ADD" (above). When you select this gadget, you will be prompted for an entry to DELETE. 3) "EDIT" -> Will allow editing individual phone numbers without leaving the "Phone Book". (see "NOTE" below for further info) (NOTE: While in the "Phone Book", if you select "ADD" or "EDIT", the gadget will remain selected to remind you of what the "current" action is... when you hit <return> on the string gadget (which you must do for the change to take effect) the "current" action will be taken. (ie: if "ADD" is selected, the number will be ADDed to the end of the list (provided there is room) If "EDIT" is selected, the number will be changed to the one in the string gadget.) If you change your mind, selecting "ADD" or "EDIT" again will toggle them back off. (so does "CANCEL") 4) "LOAD" -> Brings up the file requester for loading in new "Phone Books" (up to 60 numbers and TWO alternate service numbers, if you have more than 60 numbers, use an editor to break them up into 60 number chunks) 5) "SAVE" -> When your through "editing/adding" phone numbers, SAVE them! 6) " ^ " -> (up arrow) This will shift the display between numbers 1-30 and 31-60. (this variable is stored so that the next time you open the window, you will see the previously selected set of numbers) 7) "CANCEL"-> This will close the window without dialing any number (possibly numberS in the future) 8) "OKAY!" -> Dials Currently selected number(if any)(possibly numberS in the future) And begins the "Auto-Redial" process if selected. (see below for details) BTW, to select a number, just click on it. 9) "Alt-Serv #1" -> Selecting this gadget will dial the specified alternate service number (in the string gadget to the right) and then dial the selected phone number.(if you don't know what this would be used for, then you probably don't need it :-) 10) "Alt-Serv #2" -> This is a SECOND alternate service number you may define. (works the same as above) (NOTE: Currently EITHER or BOTH of the "Alt-Serv's" may be used with a number... in other words, if both are selected, "Alt-Serv #1" will be dialed FIRST then the "Alt-Serv #2" will be dialed, then (finally) the number. The alt-serv's can be up to 18 numbers each and the phone number can be up to 18 numbers... for a total of 54 numbers! This SHOULD be enough to reach any number you wish to dial. (along with your account number if needed) (although there may be a 30-40 number limit on your modem...) These numbers are definable in the "string" gadget where they live, and are saved/loaded along with the "Phone Book". (these are "toggle" gadgets so you have to de-select them if your not using them.) 11) "Get Keys"-> Selecting this (toggle) gadget tells the system to load the "keymacro" file with the same name as the currently selected phone number. The term will take the name of the selected phone number up until the first "space" in the name, then append ".keys" to it, the attempt to find/load a file of that name in the current "System" directory (the one that you keep all your "support" files in) EXAMPLE: If this gadget is selected and you select: Good BBS in Ca. 1-(123)-456-7890 |------Name------|-----Number-----...... to call... Then it will take the name until it reaches a "space" i.e. "Good" then add ".keys" (Good.keys) and look for that file in the current "System" directory. (selecting "Genie" would look for "Genie.keys" etc..) 12) "Get Colors"-> As you might have guessed, this operates exactly as the above function does, but it looks for a ".color" file... Using the same examples above, it would look for: "Good.color" and "Genie.color" (NOTE!: You may edit the .key/.color file to be loaded by altering it in the string gadget to the right before dialing. 13) "Auto-Redial"-> Selecting this gadget will cause the selected number to be dialed (and then re-dialed) until a connection is made. This process depends on and uses the "result codes" returned by your modem which you define in the "Define" window (part of the .def file loaded at boot time). If the result matches what you have defined as the "Busy" string or the "No Carrier" string, it will immediatly re- dial the number. If it matches the "Voice" result string, it will abort the process. If/when it finally matches one of the "Connect" strings, it will first reset the "Timer Clock" (in the Fast-Menu) to 00:00 and then BEEP and close the "Speed-Dialer" window. There is (currently) no timer or limit on the number of "tries" that it will dial. It will dial indefinately until it either connects or you abort the process yourself. Format for "Acc!.phone" files: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Duplex (F or H) | Linelength (8 or 7) || Parity (None,Even,Odd) ||| StopBits (1 or 2) |||| |||| | 17 | 17 | 5 | 4 | 26 | |--System Name---|--Phone Number---|-Baud|-Set|--------comment----------| AMIC CA. 1-(707)-579-0523 2400 F8N1 F1,F2 any comment you want Deep Thought NC 1-(919)-471-6436 2400 F8N1 (S'ware Distillery) F1,F2 GENIE 1- 774-2427 1200 H8N1 F6 CAUG OH 1-(216)-581-2284 2400 F8N1 nice board F3,F4,F2 Example of 18 numb123456789012345678 | | Number starts HERE^ Baud starts here! If needed you may actually use 18 chars. for the "phone number", and the '-', '('and ')' are optional. (to use 18 numbers they must be as shown in the last example shown above (spacing wise). Duplex, Linelength, Parity, StopBits and Baud rate (format shown above) are automatically set when a number is dialed! (unless the "Set" field is empty) (also, use CAPITAL letters in the "Set" field ) --------------------------------------------------------------------------- "DEFINE" Window: ~~~~~~~~~~~~~~~~ This window is used to set up, load and save ".def" files (configuration files) used by Access! You can specify the ".def" file to be loaded at boot-up via the Icon or the command-line (see Usage and Suggested configuration above). There is a sample definition file "Acc!.def" included in the arc, it will get you loaded and running the first time then you should open the "Define Access!..." window, fix it the way you want it, then SAVE it for future use. (you might set up different ones with different color files, .key files, phone books, etc... and then just specify the setup you want when you run the program ie. 1> Access! grey.def might load in a configuration setup to be used in interlace...) o Priority: This one is of (very) limited use but it IS set when "OKAY" is selected so if you do not know why you would use it, please just leave it set to "0". (ok?) You may set it from -1 to 4. o Interlace: Sets interlace on/off. (See: NOTE BELOW!) o Borders: Sets borders on/off. o TitleBar: Sets titlebar on/off. o # Of Colors: Sets between 4/8/16 colors. (See: NOTE BELOW!) o Shadow Pen: The pen number (0-15) used for text "shadows" in the support windows.(this is set/changed every time you click on it.) o RBufLines: This value will increment by 50 each time you click on it and is used to define the number of lines the "Review Buffer" will save/store ( and thus how much memory you allow it to use ). (NOTE BELOW!: If you make any changes that require more memory than you have available (in particular INTERLACE) the program may "exit" when it can't re-open the screen/windows. (rude, I know, I'll work on a freindlier handler of such cases...) --- The following items are also saved/loaded in the .def file allow they are not listed anywhere on this window. ( ie. the "current" state of each at the time that you save a .def file. ) --- o CHAT mode on/off. o SPLIT screen mode on/off. o STRIP mode on/off. (stripping in-comming blank lines) o Currently selected Foreground pen number. o Currently selected Background pen number. o Current positions of each of the "Fast-Menu" bars. --- THE first three items listed in the bottom part of this section are NOT set when OKAY is selected. ( ie. if you type "fred.colors" in the "Color File" string, it will NOT load that color file in when you hit OKAY to close this window, you would need to do that from the Color Palette window.) --- Filing Preferences: o "Phone Book"-> defines the "phone.file" to be loaded. (name only, no dir/path) o "Key File" -> defines the "key.file"... o "Color File"-> defines the "color.file"... o "Upload Dir"-> defines default dir/path for uploads. o "Dnload Dir"-> defines default dir/path for downloads. o "System Dir"-> defines dir/path to search for support files.(.phone, .key, .color etc...) o "Def.Capture"-> defines drive:path/name used for "captured" file when L-amiga 'c' is pressed. o "User Dir #1"-> defines dir/path used in the first user-selectable string gadget in the file requester. o "User Dir #2"-> defines dir/path used in the second... Modem Defaults: o "Set-up String"-> defines the string sent out to initialize the modem. o "Dial Prefix" -> defines string sent to modem prior to dialing. (ATDT for hayes compatibles) o "Dial Suffix" -> defines string sent to modem after dialing. ( <return>... ^M ) o "Hangup String"-> string sent to modem to hang-up. (this one may be deleted in a future version when I'll just drop carrier to hang-up) (NOTE: the strings below MUST be set properly for YOUR modem for the "Auto- dial" feature to work correctly) o "1200 Connect"-> string RETURNED by modem when you get connected at 1200 BAUD. o "2400 Connect"-> string RETURNED by modem for 2400 BAUD. o "No Connect #1"-> string returned by modem when... "NO CARRIER" o "No Connect #2"-> string returned by modem when... "BUSY" o "No Connect #3"-> string returned by modem when... "VOICE" --------------------------------------------------------------------------- Notes on File Requester: ~~~~~~~~~~~~~~~~~~~~~~~~ You might notice that two of the "disk" gadgets in the "File Requester" look a little odd... While contemplating how to make the "File Requester" fit YOUR set-up, I came accross this idea. I assume EVERYONE has "RAM:" (at least SOME ram) MOST people have "VD0:" (if you don't, you should.) EVERYONE has "DF0:" (it's the one connected to your AMY!) ALOT of people have "DF1:" (ok, so SOME people don't...) And that takes care of 4 out of 6 "disk gadgets" so the other two are free for you to specify as you please. (drive, path, ect... up to 50 chars. (I think it's 50)) This way you don't have to do alot of "assigning" if you use deeply inbedded "paths" for dl/ul's! These are two of the defaults that are defined in the "Acc!.def" file that is loaded in at boot-up. "Bytes Free" displays the totals available bytes free on the currently selected drive. Up/Down arrows on this window/requester/whatever allow you to scroll forward/backward/sideways (sideways?) through the file listing. If you are running low on mem and the regular File-Requester window can not open, then a small "Input Window" will open (with just one string gadget) to accept the drive:path/filename you provide. --------------------------------------------------------------------------- "Clocks": ~~~~~~~~~ There are two clocks in the term... (batteries not included) One of them lives in one of the "Fast-Menus" (gadget bars) and is a simple "counter/timer" for keeping track of online/session time. This timer starts up when the term boots and is reset when a connection to a BBS is made using the "Auto-Dialer" or at any time by clicking on it. It is updated once a minute and is fairly accurate although (depending on when it gets reset) it may display negative numbers (grin). This has to do with crossing a 12 hr. "time-zone" so if it does, just reset the thing. ( I've got a watchsmith coming by to look at it, so maybe it'll be fixed by the next version :-) The other (simple) clock lives in the "INFO" window (accessed through the normal menus or by hitting the <help> key). This clock just displays the current "system time" in hrs./mins. and is also updated once a minute (the most this one SHOULD be off is one minute (depending on how close to the minute it is when you reset the "counter" clock mentioned above)). There is currntly no way to set the system time from within the term so you must do that by some other means if you want this clock to be correct. --------------------------------------------------------------------------- FAST MENUS: ~~~~~~~~~~~ Most of these are self explanitory(sp) and are just short-cuts to the "normal" menu-items. There are a few that need further explanation... (NOTE:these may change from time to time and all of them may not be listed below...) (not neccessarily in any particular order ) o "QUIT" -> hmmmmmm..... o "READ" -> To read a disk (or ram:) based ASCII text file. o "PRINT" -> Starts Printer (if you have one hooked up :-) o "CAPT" -> Starts ASCII Capture (with file name) o "XUP" -> " XModem (or WXModem) send o "XDOWN" -> " XModem download o "WXDOWN"-> " WXModem download o "CHAT" -> Chat Mode o "COLOR" -> Brings up the Color Palette o "NEWCLI"-> Starts a NewCli (flip back to WBench to find it) o "MACROS"-> Opens "Macro Window" o " ^ " -> (Up Arrow) This gadget will send the "FAST MENU" to the top of the screen (and back again)(NOTE: if your cursor is at the top of the screen when you send the menu bar up there, it will "hide" the cursor. (if for some reason you can't find the cursor, move the fast menu and it will probably be there.) If you select "CHAT" AFTER the menu is at the top, the cursor will move down for you. (NOTE: this gadget works the same for both "FAST MENUS") // o "\X/ " -> (check mark) This gadget is essentually a "Back Gadget". Use it to reposition the "Fast-Menus" and the "Status Line" to your preferences. o "ASEND" -> Starts ASCII "Send" mode (same as normal menu selection). (see: "Other" below) o "HANGUP" -> Sends out "hang-up" string to modem. o "DIAL" -> Opens "Phone Book" window. o "REDIAL" -> Simply "re-dials" last number dialed... (NOTE: if the "auto-redial" feature is currently selected, then this gadget will restart the "auto-redial" process, otherwise the current number is simply redialed.) o "00:00" -> (or "01:30","12:00","04:15"... you get the picture) It's a Clock. (see: "Clocks" above for details) o "STRIP" -> This option will strip all blank lines from in-comming text! This allows you to get more (meaningful) lines of text on screen at once. (nice feature for conferencing, CB mode, ect... but can be used anytime) o "BORDRS" -> (short for "BORDERS") This option will enable/disable the main window borders to give you a full 80 col. screen vs a 79 col. screen. This will also give you an extra line of text in the "transmit" (bottom) window in "CHAT" mode. (3 lines vs. 2.5 with the borders on) o "SPLIT" -> ( activated ONLY in interlace mode ) Selecting "SPLIT" (currently not a normal menu item) will give you a TRUE split screen!, which means no more swapping back and forth to the WorkBench screen to see how your "unarcing" is coming along (know of a good, small "DirUtil"? like one that takes up half of a screen... ? ) What it actually does is shrink the term down to normal, non-interlaced size (640*200) and moves the screen half-way down. Thus giving you a 23 line (interlaced) terminal on the bottom of the screen w/out losing any of the normal terminal display area ( of course you dont get as many lines as a "full/sized/interlace/display" but you can swap back and forth as you like!) Seleting "SPLIT" again returns you to a Full/Sized/Interlace screen again (it's a toggle switch). (NOTE: this option works very well when used with the "NEWCLI" option above or with a "half-screen DirUtil" if there's one around or better yet, with WBench set to interlace also. o "LACE" -> This option will toggle you between "Interlace" and "Non-Interlace" modes. (or cause the program to exit if you don't have enough memory for interlace) I have played with this EXTENSIVELY and it seems to work fine. (let me know if it doesn't for you, along with what you system set-up is, BUT BEFORE YOU DO THAT, see the paragraph below about memory) AGAIN, if you don't have enough memory for "INTERLACE" in the first place, chances are the program will EXIT! You might also avoid clicking on this (or ANY other) gadget while either the "File Requester", "File Reader Window" or "Palette Window" is open. (all other windows should be ok) --------------------------------------------------------------------------- Other: ~~~~~~ o Checks for ".arc/.ARC/.zoo/.ZOO/.pak/.PAK" extensions and disables "auto-chop" feature for these files. --------------------------------------------------------------------------- Known Bugs: ~~~~~~~~~~~ o You CAN open every window/requester at the same time... This is NOT good and SHOULD be AVOIDED! (or you might see a number to meditate over :-)(although if you close them back down in the right order, it should be OK, as long as you don't fiddle with a bunch of gadgets while they're open) o This program is being developed on an "Amiga 1000" w/68010, a "Starboard II" 2 meg. expansion, "Signalman Lightning 2400 Baud Modem" among other things... I try to test it with various configurations before releasing a version (Amiga 1000 w/512K, and Amiga 500 w/1meg.) but am not always able to do so. Along these same lines, it has come to my attention that certain other programs do not (may not) work correctly with "Access!" (or is it the other way around ? :-). noted are: "More-Rows", "Facc II" and "SetFont". A few of these problems seem to be due to "Access!" and others I have not yet determined. Of course, if you know of any others, please let me know. (BTW, Access! will NOT work correctly with ADOS 1.1 and I have no plans to change this! (does anyone STILL use 1.1 ?!)) --------------------------------------------------------------------------- So far, things seem to be going pretty well (knock on wood). The main problem USUALLY ALWAYS has to do with a lack of memory... Using an 8/16 color CUSTOM screen with a dozen or so support windows, thirty or so multi-color gagdets, two fully functional console.devices along with the code to implement all this and multiple protocols ( with more on the way :-), makes this a fairly ambitious program memory-wise so..... If a window "just doesn't open" when you expect it to, CHANCES ARE, you do not have enough memory for the window to open! i.e. If you see a message in the main terminal window the says something like... "Can't open such-in-such Window" then it's a MEMORY (or lack there of) problem! The term SHOULD still work on a 512K machine, but you may have to make some sacrafices to do so (like multi-tasking). If you do have other problems to report, PLEASE list the VERSION NUMBER along with the report! This will help me track down the problem or let me know if it's already been fixed. I try to respond to most/all reports/suggestions/comments but am not always able to do so. -Keith- ---------------------------------------------------------------------------- The Plea: ~~~~~~~~~ Again, Access! IS being distributed as ShareWare so if you continue to use it after some trial period, please help in the fight against high-priced software and support ShareWare authors by sending in your registration. Suggested contribution is $25.00 (but please feel free to adjust this figure to the amount you feel it's worth.) Snail Mail: Keith Young RT. 2 BOX 13G Moneta, VA. 24121 Please send all BUG REPORTS, KUDO'S, HELP, SUGGESTIONS, INSULTS to... GENIE: K.Young (special support section available for registered users) CA-AUG: Keith Young Compuserve: 73170,307 Deep Thought: Keith Young __________________________________EOF________________________________________