HelpM1:\Sleave path edit mode.|m\Aselect a path element.|m\dmove a point.|mDrag ⇧\a to move control points in pairs.
HelpM2:Click or drag \s to select objects.|mDouble-click \s to select a lower object.|mDrag \s or ⇧\s to select objects.|mClick or drag \a to adjust which objects are selected.
HelpP1:\Senter a path.|m\Aenter path edit mode.
HelpP2:\Senter a sub-path.
HelpP3:\Senter a path element.|mDouble-click \s to enter the final path element.|mPress RETURN to complete the path.|mPress ESC to abandon the path.
HelpP4:
HelpR1:\Senter a rectangle.|m\Aenter path edit mode.
HelpR2:Click \s (or press RETURN) to complete the rectangle.|mPress ESC to abandon the rectangle.
HelpS1:Capture objects.
HelpS2:Move selection.
HelpS3:Scale selection.
HelpS4:Rotate selection.
HelpT1:\Senter a text line.
HelpT2:Type to enter a text line.|m\Sstart a new text line.|mDouble-click \s (or press RETURN) to complete the text line.
TextL1:Warning: text area font '%s' could not be loaded
TextM1:Not enough memory to read text area
TextN1:Text area must end with a newline character
TextT1:Bad number or missing terminator in \%c
TextV1:Text area version number is wrong or missing
TextV2:Non-digit '%c' in \V command
TextX1:You may only export one text area - deselect others
TextX2:No selected text area
ICON0/D00:Move the pointer right for information about Draw.
ICON1:\Smake Draw go away.
D0:\Rcontrol miscellaneous features.
D1:\Rchoose what to save.
D2:\Rchange the style of objects.
D3:\Rcontrol the entry mode.
D4:Click \s (or press F6) for select mode.|m\Roperate on the selection.
D5:\Rtransform the selection.
D6:\Rcontrol the zoom factor.|m(Press ^Q to zoom out.)|m(Press ^W to zoom in.)|m(Press ^D to reset.)|m(Press ^R to toggle the factor.)|m(Drag ⇧\a to zoom in to a given box.)|m(Double-click ⇧\a to zoom out.)
D7:\Rcontrol the grid.|m\Stoggle the presence of the grid.
D8:Click \s (or press ^F1) to toggle the presence of the toolbox \w.
D01:Click \s for another \w onto the same drawing.
D02:\Stoggle the presence of visible paper limits.|m\Rcontrol the limits.|mClick ^\s or ^\a to move the limits.|mDrag ^\s or ^\a to change the outer or inner limits.
D03:\Sprint the drawing.|mMove the pointer right (or press PRINT) to set the number of copies.
D04:Click \s (or press ^L) to toggle the Zoom lock to powers of two.
D05:Click \s (or press F8) to undo the last operation.
D06:Click \s (or press F9) to redo the operation just undone.
D10:Move the pointer right (or press F3) to get a save box for this drawing.
D11:Move the pointer right (or press ⇧F3) to get a save box for the selection.
D12:Move the pointer right (or press ^F3) to get a save box for the sprites of this drawing.
D13:Move the pointer right (or press ^⇧F3) to get a save box for the selected text area.
D20:\Rchange the width of paths.
D21:\Rchange the colour of paths.
D22:\Rchange the colour used to fill areas.
D23:\Rchange the dot/dash pattern of paths.
D24:\Rchange the way in which path elements are joined.
D25:\Rchange the decoration used at the start of paths.
D26:\Rchange the decoration used at the ends of paths.
D27:\Rchange the rule used for deciding where to fill areas.
D28:\Rchange the font used for text lines.
D29:\Rchange the size (height and width) used for text lines.
D2a:\Rchange the height of text lines.
D2b:\Rchange the colour of text lines.
D2c:\Rchange the colour used for anti-aliasing of text lines.
D30:Click \s (or press ^F7 or TAB) for text entry mode.
D34:Click \s (or press RETURN) to complete the current object.
D35:\Stoggle whether paths are left open or closed on completion.
D36:Click \s (or press ESC) to abandon the current object.
D37:Click \s for rectangle entry mode.
D38:Click \s for ellipse entry mode.
D40:Click \s (or press ^A or F5) to select all objects.
D41:Click \s (or press ^Z or ⇧F6) to deselect all objects.
D42:Click \s (or press ^C or F7 or COPY) to copy selected objects.
D43:Click \s (or press ^X or ⇧F8 or DELETE or BACKSPACE) to delete selected objects.
D44:Click \s (or press ^F or ^F4) to raise the selected objects to the front.
D45:Click \s (or press ^B or ^⇧F4) to lower the selected objects to the back.
D46:Click \s (or press ^G or F4) to gather the selected objects into a group.
D47:Click \s (or press ^U or ⇧F4) to separate selected groups into their members.
D48:Click \s (or press ^E or ^F6) to edit the selected object.
D480/TEXT:Type to modify the text.
D49:Click \s (or press ^S or ⇧F5) to move selected objects to the nearest grid point.
D4a:Click \s (or press ^J or ^F5) to align objects within selected groups.|m\Rcontrol the alignment used.
D4b:\Sinterpolate between the two matching paths in the selected group.|m\Rchange the number of gradations.
D4c:\Sgrade between the two matching paths in the selected group.|m\Rchange the number of gradations.
D4d:\Sconvert selected text lines to paths.
D4a0:\Salign the left-hand sides of objects.
D4a1:\Salign the vertical centres of objects.
D4a2:\Salign the right-hand sides of objects.
D4a3:\Salign the tops of objects.
D4a4:\Salign the horizontal centres of objects.
D4a5:\Salign the bottoms of objects.
D50:\Srotate selected objects.|m\Rchange the angle of rotation.
D51:\Sscale selected objects horizontally.|m\Rchange the scale factor.
D52:\Sscale selected objects vertically.|m\Rchange the scale factor.
D53:\Sscale the width of selected paths.|m\Rchange the scale factor.
D54:\Sscale selected objects horizontally, vertically and in width.|m\Rchange the scale factor.
D70:\Stoggle the presence of the grid.
D71:Click \s (or press ⇧F1) to toggle whether objects are locked to the grid.
D72:\Stoggle whether extra grid points are added at high zoom factors.
D73:\Rchange the grid colour.
D74:\Rchange the grid density, horizontally and vertically (in inches).
D75:\Rchange the grid density, horizontally and vertically (in centimetres).
D76:\Rchange the grid density, vertically only (in inches).
D77:\Rchange the grid density, vertically only (in centimetres).
D78:\Sselect a rectangular grid.
D79:\Sselect a triangular (isometric) grid.
D740/D760:Click \s for an inch/quarter-inch grid.
D741/D761:Click \s for an inch/sixteenth-inch grid.
D742/D762:Click \s for an inch/fifth-of-an-inch grid.
D743/D763:Click \s for an inch/tenth-of-an-inch grid.
D744/D764:\Rchange the distance between major grid points.
D745/D765:Move the pointer to the right to change the number of minor grid points per major grid point.
D750/D770:Click \s for a centimetre/half-centimetre grid.
D751/D771:Click \s for a centimetre/millimetre grid.
D752/D772:\Rchange the distance between major grid points.
D753/D773:Move the pointer to the right to change the number of minor grid points per major grid point.
D7440/D7640:Type a number and \Schange the distance between major grid points (in inches).
D7520/D7720:Type a number and \Schange the distance between major grid points (in centimetres).
D7450/D7650/D7530/D7730:Type a number and \Schange the number of minor grid points per major grid point.
D020:\Stoggle the presence of visible paper limits.
D021:\Sreset the paper limits to the printer-driver defaults.
D022:Click \s for vertically-aligned paper.
D023:Click \s for horizontally-aligned paper.
D024/D025/D026/D027/D028/D029:\Schoose this size of paper.
D200/D201/D202/D203/D204/D205:\Schoose the width for paths (in points).
D206:Type a number and \Schoose it as the width for paths (in points).
D230/D231/D232/D233/D234:\Schoose the pattern for paths.
D240:Click \s for paths to have pointed joints.
D241:Click \s for paths to have rounded joints.
D242:Click \s for paths to have cut-off joints.
D250/D260:Click \s for paths to be squared off at the cap.
D251/D261:Click \s for paths with a rounded cap.
D252/D262:Click \s for paths with a square cap.
D253/D263:Click \s for paths with a triangular (or arrowhead) cap.|m\Rchange the size of the triangle.
D2530/D2630:\Rchange the width of the path cap.
D2531/D2631:\Rchange the height of the path cap.
D25300/D25301/D25302/D25303/D26300/D26301/D26302/D26303:\Schoose the width for triangles (in multiples of the path width).
D25304/D26304:Type a number and \Schoose it as the width for triangles (in multiples of the path width).
D25310/D25311/D25312/D25313/D26310/D26311/D26312/D26313:\Schoose the height for triangles (in multiples of the path width).
D25314/D26314:Type a number and \Schoose as the height for triangles (in multiples of the path width).
D270:\Sfill areas enclosed by any paths, where paths in opposite directions cancel.
D271:\Sfill areas enclosed by an odd number of paths, ignoring direction.
D280/D281/D282/D283/D284/D285/D286/D287:\Suse the named font.
D288/D289/D28a/D28b/D28c/D28d/D28e/D28f:\Suse the named font.
D28g/D28h/D28i/D28j/D28k/D28l/D28m/D28n:\Suse the named font.
D290/D291/D292/D293/D294:\Schoose the size (height and width) used for text lines (in points).
D295:Type a number and \Schoose the size (height and width) used for text lines (in points).
D2a0/D2a1/D2a2/D2a3/D2a4:\Schoose the height used for text lines (in points).
D2a5:Type a number and \Schoose the height used for text lines (in points).
D730/D731/D732/D733/D734/D735/D736/D737:\Schoose the grid colour.
D738/D739/D73a/D73b/D73c/D73d/D73e/D73f:\Schoose the grid colour.
EDIT0:Click \s (or press ^F8) to change the current path element to a curve.
EDIT1:Click \s (or press ^F9) to change the current path element to a straight line.
EDIT2:\Sreplace the current path element by a move.
EDIT3:Click \s (or press ^C or F7 or COPY) to add a point at the centre of the current path element.
EDIT4:Click \s (or press ^X or ⇧F8 or DELETE or BACKSPACE) to delete the current path element.
EDIT5:\Sline up the end of this path element with the start of the next.
EDIT6:\Sdisconnect the ends of the path.
EDIT7:\Sconnect the ends of the path.
EDIT8:Move the pointer right (or press F5) to change the coordinates of the current point.
EDIT9:Click \s (or press ^S or ⇧F5) to move all points in the current path to the nearest grid point.
DXF:Fill in the scale factor and default font name and click \s on OK to make a drawing from a DXF file.
LOAD:Fill in the name of a file and click \s on OK to add it into the drawing.|m(Drag \s from a file icon to a drawing to add the file into the drawing.)
INFO:This \w displays information about Draw.
SAVEAS:Either drag \s from the file icon to a directory display, or fill in the name of a file and click \s on OK, to save as a drawing.
DBOXTCOL:Either drag \s on the sliders, or fill in the values for red, green and blue, or click \s on a coloured icon, or click \s on the arrows, and click \s on OK, to use the colour on the central icon.
MAGNIFIER: Either fill in the numerator and denominator, or click \s on the arrows, to use the given zoom factor.
CLOSE:\Sanswer the question.
QUIT:\Sanswer the question.
COORDS:Fill in new coordinates for the point, and click \s on OK.
PRINT:Fill in the number of times you want the drawing to be printed, and click \s on OK.
